Регистрация

Индикаторы и стратегии

Atlas Prime Capital - Stage 2 Stocks Swing EntryIdentifies high-probability pullback entries in stocks that are in a confirmed Stage 2 uptrend (Weinstein framework). Designed for swing traders who do their fundamental homework first and need a timing tool for entries. How it works: The indicator watches three key moving averages — 8 EMA, 21 EMA, and 50 SMA — for two entry patterns: Undercut & Reclaim — price closes below the MA, then closes back above it on the next bar. This is the stronger signal, indicating a shakeout of weak hands followed by a reversal. Touch & Bounce — price pulls back into the proximity zone of the MA (default 1%) and closes green above it. The classic "buy the dip to the moving average" setup. Signals only fire when the stock is in a Stage 2 uptrend (price above rising 150 SMA, 50 SMA above 200 SMA, both rising). This filters out dead cat bounces in downtrends and range-bound chop. Signal quality is graded by two factors: — Volume confirmation: bounce occurs on above-average volume (1.5x 20-day avg), suggesting institutional participation. Confirmed signals appear brighter and larger on the chart. — Tightness: the candle range is compressed relative to recent ATR, indicating an orderly, low-volatility pullback rather than panicked selling. On-chart dashboard (top right) shows at a glance: Stage 2 status, each MA's current level, your distance to it as a percentage, active signals, and current volume/tightness conditions. Six alert conditions included: — Any MA signal — Individual alerts for 8 EMA, 21 EMA, and 50 SMA — High Conviction Entry (signal + volume + tightness all confirmed) — Undercut & Reclaim only Visual guide: — Cyan = 8 EMA | Orange = 21 EMA | Pink = 50 SMA — Triangles = undercut & reclaim | Circles = touch & bounce — Bright/large = volume confirmed | Faded/small = no volume confirmation — Subtle green background tint when price enters any MA's proximity zone All parameters are adjustable in settings: MA lengths, proximity %, volume and tightness thresholds. Note: This is a timing tool, not a stock screener. It works best when applied to stocks you have already identified as fundamentally strong. It tells you when to act, not what to buy.
Индикатор Pine Script®
от frisbeesalad
Birth of a Sage# **Birth of a Sage** Most traders don’t fail because they don’t understand the market. They fail because they act **too early**. They see movement… They drop to a lower timeframe… They convince themselves it’s close enough… And they engage before the setup is actually there. This was built to interrupt that. --- ## What this is **Birth of a Sage** is not a signal. It doesn’t tell you what to buy or sell. It’s a **decision gate**—a pause inside your chart that forces one question: > *“Am I actually authorized to be here right now?”* --- ## How it works Before you engage the lower timeframe, you must define: * Higher timeframe bias * A meaningful inflection point * A confirmed purge * Direction * Market condition If that structure isn’t in place: → **Blocked** If the structure is present but risk is elevated: → **Caution** If everything aligns cleanly: → **Authorized** --- ## Setup vs Execution This tool enforces a separation most traders blur: * **HTF (Higher Timeframe)** → where the idea is formed * **LTF (Lower Timeframe)** → where the trade is executed You are not allowed to execute until the HTF work is done. --- ## What is an “Easy Money Trade”? An **Easy Money Trade** is not about comfort or opinion. It’s about **alignment + inevitability**. It has three characteristics: ### 1. Structural Alignment * HTF bias is clear * Price has reached a meaningful inflection (HTF level / DOL) * A purge has already occurred You are not guessing direction—you are responding to it. --- ### 2. A Catalyst (Technical or Fundamental) There is a **reason price should move now**, not later. That catalyst can be: * **Technical** * displacement / imbalance * clean break in structure * liquidity taken followed by expansion * **Fundamental / Timing** * session opens (Asia / NY) * scheduled events * volatility windows No catalyst = no urgency No urgency = not easy money --- ### 3. Clean Follow-Through Potential Price should not need to be “managed.” It should **move with intent**. * minimal hesitation * clear directional behavior * continuation makes sense without forcing it If you have to convince yourself, manage aggressively, or babysit the trade… It’s not an Easy Money Trade. --- ## MSS / CSD and Execution You’ll see: * **TTF MSS/CSD** * **Easy $$ Trade** These do **not** authorize the setup. They exist for the next phase: > **Execution and validation on the lower timeframe** The setup gives you permission to look. MSS/CSD helps you decide whether to act. --- ## Market Conditions = Risk Context * **Trending / Continuation** → aligned, lower risk * **Pullback / Range** → higher risk, proceed carefully Not every valid setup deserves the same level of conviction. --- ## What this is really doing This tool doesn’t make you a better trader. It makes it harder to: * rush * force * or justify entries that aren’t there --- ## Why the name A “sage” isn’t someone who knows more. It’s someone who has learned when **not** to act. --- ## Final thought > You don’t need more setups. > You need fewer mistakes. This won’t find trades for you. It will stop you from taking the wrong ones. And that’s where most of the edge is.
Индикатор Pine Script®
от trading_wait
Volume Bubbles (Shim Byeong Geon) # Volume Bubbles (심병건) - 수정 원작자: © QuantAlgo (CC BY-NC-SA 4.0) 수정자: 심병건 ## 지표 설명 거래량 급등을 버블(동그라미)로 시각화하며, 거래량 크기, 매수/매도 압력(델타), 여러 시간 프레임의 합의를 함께 고려합니다. - 버블 크기 (작음/중간/큼): 백분위수(75/90/97) 기준. 클수록 드물고 중요. - 버블 색상: 매수(초록/청록), 매도(빨강/보라), 혼합(회색) - 합의 모드: 단기/중기/장기 윈도우 모두 임계치 초과해야 버블 생성 (노이즈 필터링) - 델타 미지원 심볼 자동 대응 ## 원본 대비 수정한 점 - 작은 클러스터 기본값 꺼짐 → 차트 노이즈 감소 - 합의 모드 기본값 "모든 윈도우 (가장 엄격)" → 신뢰도 향상 - 버블 내 숫자 표시 기본값 꺼짐 → 깔끔한 원형 유지(설정에서 숫자 표시가능) - 색상 프리셋 기본값 "Cosmic" → 다크 테마 가독성 향상 - 버블 위치를 캔들에서 5틱 오프셋 → 겹침 방지 - 혼합(Mixed) 버블 색상을 회색으로 변경 → 중립적 표현 - 모든 설정 및 툴팁 한글화 ## 사용 방법 - 캔들 아래 초록/청록 원 = 매수 신호 - 캔들 위 빨강/보라 원 = 매도 신호 - 회색 원 = 방향 불명확 (관망) - 버블에 마우스 호버 시 상세 정보 툴팁 표시 ## 주의 사항 - 델타 미지원 심볼에서는 일부 기능 제한 (툴팁 참고) - 라벨 500개 제한으로 오래된 버블의 툴팁은 사라질 수 있음 - 비상업적 용도로만 사용 가능 (CC BY-NC-SA 4.0) 라이선스: creativecommons.org
Индикатор Pine Script®
от myhide78
27-Min 2/1 Cycle TrackerThis indicator visualizes a structured time-based cycle using alternating intervals derived from a fixed starting point. Beginning at 18:00 (New York time), the script divides time into repeating segments based on a combination of 27-minute and 54-minute intervals. These intervals alternate in a continuous sequence, allowing traders to monitor the current phase of the cycle in real time. The panel displays: * The current active interval * The projected end time of the current segment * The previous segment and its time range * A live countdown timer showing time remaining in the current phase All visual elements—including text size, colors, and layout—are fully customizable. This tool is designed for traders who incorporate time-based structure into their analysis and want a clear, consistent way to track repeating intraday timing patterns.
Индикатор Pine Script®
от enigma_airboss
Smart Order Block ReboundSmart OB Rebound is an advanced order block–based trading indicator designed to identify high-probability market reactions at key institutional zones. It focuses on detecting valid bullish and bearish order blocks and generating real-time signals based on precise price behavior when the market revisits these zones. This tool is built for traders who want to capture reversals and continuations at key liquidity areas with clear, actionable signals and minimal noise. 🔹 Key Features Order Block Detection Automatically identifies bullish and bearish order blocks based on market structure and price displacement. Real-Time Signals (Intrabar) Signals appear in real-time as price interacts with the order block, allowing faster reaction to market moves. Signal Invalidation Logic If price moves against the setup, signals are automatically removed in real-time to prevent false entries. Rebound-Based Entries Signals are generated only when price returns to an order block and shows a valid rebound reaction. Volume & Volatility Filtering Signals are only displayed when sufficient volume and volatility are present, helping reduce low-quality trades. Clean Visual Interface Order blocks are clearly marked as zones without clutter, keeping the chart easy to read. 🔹 Benefits 🎯 Higher Precision Entries — Focuses only on meaningful order block reactions ⚡ Real-Time Decision Making — React instantly to market conditions 🧠 Reduced Noise — Filters out weak moves using volume and volatility 🔁 Adaptive to Market Conditions — Works across different forex pairs and volatile assets 📊 Clear Risk Perspective — Designed to help traders identify structured opportunities around key zones
Индикатор Pine Script®
от alejosaocalero2006
Helion Trend Weave [JOAT]Helion Trend Weave Introduction The Helion Trend Weave is an open-source volatility-adaptive multi-MA ribbon overlay that self-adjusts its period lengths based on real-time ATR regime. In high-volatility environments, periods shorten for faster response; in calm markets, they lengthen for noise reduction. The ribbon consists of up to 12 moving average filaments with four-state color logic that provides instant trend phase recognition: dominant rise, fading rise, dominant fall, and fading fall. Beyond simple trend direction, HTW measures ribbon spread as a trend strength gauge, detects compression squeezes, identifies ribbon inversions (twists), and generates six distinct signal types — all with cooldown-based anti-overlap to keep the chart clean. This indicator addresses a fundamental limitation of static moving average systems: fixed periods that work well in one volatility environment fail in another. A 20-period EMA that provides clean signals in a trending market produces whipsaws in a choppy one. HTW solves this by dynamically morphing all ribbon periods through a volatility ratio, while providing a comprehensive suite of trend diagnostics through its dashboard and signal architecture. Core Engine: Volatility Morphing The adaptive period system works by computing a volatility ratio between a fast ATR and a slow ATR: float volReg = atrL != 0 ? atrS / atrL : 1.0 float adaptMult = adaptive ? math.max(adaptMin, math.min(adaptMax, 1.5 / volReg)) : 1.0 When short-term volatility exceeds long-term volatility (ratio > 1), the multiplier decreases below 1.0, shortening all periods for faster reaction. When volatility contracts (ratio < 1), the multiplier increases above 1.0, lengthening periods for noise filtering. The morph floor and ceiling are configurable to prevent extreme period distortion. Every filament in the ribbon is calculated as: Period = max(2, round((basePeriod + index * spacing) * adaptMult)) This means the entire ribbon breathes with the market — expanding its lookback during calm periods and contracting it during volatile ones. Multi-MA Ribbon Architecture The ribbon supports up to 12 filaments using EMA, SMA, or SMMA calculation types. Each filament is computed with inline EMA/RMA logic at global scope to handle the series-int periods that result from adaptive morphing. The filaments are plotted with progressive transparency — the lead filament is vivid and thick, while trailing filaments fade gradually, creating a visual depth effect. Four-State Color Logic Rather than simple bullish/bearish coloring, HTW uses four states based on two conditions — trend direction (lead above/below anchor) and momentum (lead rising/falling): Dominant Rise: Lead filament above anchor AND rising — strong bullish momentum Fading Rise: Lead filament above anchor but NOT rising — bullish trend losing steam Dominant Fall: Lead filament below anchor AND falling — strong bearish momentum Fading Fall: Lead filament below anchor but NOT falling — bearish trend losing steam The "fading" states are early warnings that a trend may be approaching exhaustion before an actual crossover occurs. Trend Diagnostics Ribbon Spread: The absolute distance between the fastest and slowest filaments, normalized by ATR. This serves as a volatility-adjusted trend strength gauge. The spread is percentile-ranked against its own history and classified as DOMINANT (>70th), DEVELOPING (30-70th), or DORMANT (<30th). Alignment Score: Measures what percentage of filament segments are in correct sequential order (ascending for bull, descending for bear). LOCKED = 100% alignment, PARTIAL = 50%+, SCATTERED = below 50%. Full alignment is a powerful trend confirmation. Spread Momentum: Rate of change of the normalized spread — EXPANDING, CONTRACTING, or FLAT. Expanding spread after compression often signals the beginning of a significant move. Compression Chamber (Squeeze Detection) The indicator percentile-ranks the raw ribbon spread against a configurable lookback. When the spread falls below the compression percentile threshold (default: 10th percentile), the ribbon is considered "squeezed" — a state that often precedes explosive directional moves. A subtle background aura highlights compression periods. Signal Architecture HTW generates six signal types, each with independent cooldown timers and a global anti-overlap system that ensures only one label appears per bar (priority: Cross > Surge > Twist > Fan > Snap > Drift): IGNITE / QUENCH (Weave Cross): Lead filament crosses above or below the anchor filament — the core directional signal. SURGE (Momentum Surge): Compression releases into rapid expansion — the ribbon was squeezed and is now expanding with directional conviction. This is a structural breakout signal. TWIST LOCK: Ribbon inversion confirmed after a configurable number of bars of sustained new alignment. More conservative than a simple crossover. FAN (Filament Fan): All filaments achieve perfect sequential order — a powerful trend confirmation that indicates full ribbon alignment. SNAP (Snap Recoil): Price crosses the ribbon midpoint against the current trend direction while the ribbon has meaningful width. This is a mean-reversion signal. DRIFT (Drift Fade): Trend force decays to dormant level — an exhaustion warning when the spread percentile drops below 15%. // Global anti-overlap: only one label per bar (priority order) bool doCross = (bullCross or bearCross) and not barUsed bool doSurge = (surgeUp or surgeDn) and not barUsed and not doCross bool doTwist = (twistBullEdge or twistBearEdge) and not barUsed and not doCross and not doSurge Command Panel (Dashboard) A 12-row monospace dashboard displays real-time trend intelligence: PHASE: Current four-state classification (Dominant Rise, Fading Rise, Dominant Fall, Fading Fall) FORCE: Trend strength classification with percentile (DOMINANT / DEVELOPING / DORMANT) APERTURE: Normalized ribbon spread with expansion/contraction direction ALIGNMENT: Filament sequential order score (LOCKED / PARTIAL / SCATTERED) MORPH: Current adaptive period multiplier (e.g., 0.75x in high vol, 1.8x in low vol) COMPRESS: Whether the ribbon is currently in a squeeze state WEAVE: Current MA type and filament count configuration VOL REG: Raw volatility ratio (fast ATR / slow ATR) MIDPOINT: Whether price is above or below the ribbon midpoint, with the midpoint price LEAD PER / ANCHOR PER: Current effective periods after morphing Input Parameters Helix Parameters: Filament Type: EMA, SMA, or SMMA (default EMA) Origin Period: Fastest MA period (default 5) Weave Depth: Number of filaments, 3-12 (default 8) Filament Spacing: Period increment between filaments (default 5) Volatility Morphing: Enable/disable adaptive periods (default on) Morphic Tuning: Impulse ATR / Anchor ATR: Fast and slow ATR periods for volatility ratio Morph Floor / Ceiling: Minimum and maximum period multiplier bounds Compression Chamber: Compression Aura: Toggle squeeze background highlight Chamber Lookback / Compression Percentile: Squeeze detection parameters Signal Architecture: Individual toggles for all six signal types Twist Confirmation: Bars of sustained inversion required (default 2) How to Use This Indicator Watch for SURGE signals after compression periods — these often mark the beginning of significant directional moves. Use the four-state color system to identify trend exhaustion early. "Fading" states warn that momentum is weakening before a crossover occurs. FAN signals (full filament alignment) are powerful trend confirmations — they indicate that all timeframe layers of the ribbon agree on direction. SNAP signals provide counter-trend opportunities when price crosses the ribbon midpoint against a wide ribbon — but use them with caution and additional confirmation. Monitor the MORPH multiplier in the dashboard — extreme values (very low or very high) indicate unusual volatility conditions. The ALIGNMENT metric helps distinguish between clean trends (LOCKED) and choppy conditions (SCATTERED). Limitations Moving average ribbons are inherently lagging — the adaptive morphing reduces but does not eliminate this lag. Compression detection identifies potential breakout setups but does not predict breakout direction. The adaptive period system can produce rapid period changes during volatile transitions, which may cause visual noise in the ribbon. SNAP (mean reversion) signals are counter-trend and carry higher risk than trend-following signals. The indicator works best on liquid instruments with consistent price action. Thin markets may produce unreliable morphing behavior. Signal cooldowns prevent spam but may also suppress valid signals that occur in rapid succession. Originality Statement This indicator is original in its integration of volatility-adaptive period morphing with comprehensive ribbon diagnostics. While moving average ribbons are a known concept, HTW is justified because: The ATR-ratio-based period morphing dynamically adjusts all filament periods simultaneously, creating a ribbon that breathes with market volatility — unlike static ribbon indicators. Four-state color logic (rising/falling crossed with above/below) provides phase recognition beyond simple bullish/bearish classification. The alignment scoring system quantifies ribbon sequential order as a percentage, providing a measurable trend quality metric. Six distinct signal types with priority-based anti-overlap and independent cooldowns create a clean, non-cluttered signal architecture. Compression detection integrated directly into the ribbon spread provides squeeze identification without requiring a separate indicator. The comprehensive 12-row dashboard presents trend diagnostics including effective morphed periods, spread momentum, and alignment state. Disclaimer This indicator is provided for educational and informational purposes only. It is not financial advice. Moving average systems identify trends after they begin and cannot predict future price direction. Past trend patterns do not guarantee future behavior. Always use proper risk management and conduct your own analysis before making trading decisions. The author is not responsible for any losses incurred from using this tool. -Made with passion by officialjackofalltrades
Индикатор Pine Script®
от officialjackofalltrades
1
Stochastic Chande Momentum Oscillator (Stoch CMO)The Stochastic CMO combines the Chande Momentum Oscillator (CMO) with Stochastic normalization to measure momentum on a bounded 0–100 scale. Why CMO instead of RSI? RSI uses Wilder smoothing internally, which adds lag before any Stochastic formula is even applied. CMO skips that — it uses raw sums of up and down moves, so there's no hidden lag tax. The result is that StochCMO carries 2 layers of lag (Stochastic + K/D smoothing) vs StochRSI's 3 (Wilder MA + Stochastic + K/D smoothing), making it faster to react to price changes with comparable settings. How it works: - CMO measures the ratio of up-moves vs down-moves over a set period - That CMO value is then run through a Stochastic formula to normalize it between 0 and 100 - %K (blue) is the smoothed Stochastic CMO line - %D (orange) is a moving average of %K, acting as a signal line Key levels: - 80 → Overbought - 50 → Midline (trend bias) - 20 → Oversold Includes 6 built-in alerts for crossovers and crossunders at all three levels. Settings: - CMO Length (default 9) - Stochastic Length (default 14) - Smooth K (default 3) - Smooth D (default 3)
Индикатор Pine Script®
от zhangqian21
Pin Bar + 0.5-0.618 [Yuan]This Pine Script v6 indicator identifies Bull and Bear Pin Bar candlestick patterns on any chart, coloring recognized candles and marking them with directional arrows. A Bull Pin Bar is defined by a long lower wick at least 2.618 times the body, a minimal upper wick no more than 50% of the lower wick, a small body occupying less than 45% of the full candle range, and the body positioned in the upper half of the candle — signaling strong demand rejection from below. A Bear Pin Bar mirrors these conditions with a dominant upper wick and body in the lower half, indicating supply rejection from above. For every detected Pin Bar, two horizontal reference lines are plotted extending 3 bars to the right: a black line at the 0.5 level and a blue line at the 0.618 level, both measured from the high downward for Bull Pin Bars and from the low upward for Bear Pin Bars, defining the optimal re-entry zone based on the correction theory principle that price returning to this 0.5–0.618 area represents the highest-probability entry point where trapped positions provide directional liquidity. All historical Pin Bar levels are preserved on the chart, with all key parameters including wick ratios, body proportion, line color, and line width fully adjustable through the indicator settings panel.
Индикатор Pine Script®
от yuanhb1993
Real-Time Smart OB ReboundReal-Time Smart OB Rebound is an advanced order block–based trading indicator designed to identify high-probability market reactions at key institutional zones. It focuses on detecting valid bullish and bearish order blocks and generating real-time signals based on precise price behavior when the market revisits these zones. This tool is built for traders who want to capture reversals and continuations at key liquidity areas with clear, actionable signals and minimal noise. 🔹 Key Features Order Block Detection Automatically identifies bullish and bearish order blocks based on market structure and price displacement. Real-Time Signals (Intrabar) Signals appear in real-time as price interacts with the order block, allowing faster reaction to market moves. Signal Invalidation Logic If price moves against the setup, signals are automatically removed in real-time to prevent false entries. Rebound-Based Entries Signals are generated only when price returns to an order block and shows a valid rebound reaction. Volume & Volatility Filtering Signals are only displayed when sufficient volume and volatility are present, helping reduce low-quality trades. Clean Visual Interface Order blocks are clearly marked as zones without clutter, keeping the chart easy to read. 🔹 Benefits 🎯 Higher Precision Entries — Focuses only on meaningful order block reactions ⚡ Real-Time Decision Making — React instantly to market conditions 🧠 Reduced Noise — Filters out weak moves using volume and volatility 🔁 Adaptive to Market Conditions — Works across different forex pairs and volatile assets 📊 Clear Risk Perspective — Designed to help traders identify structured opportunities around key zones
Индикатор Pine Script®
от alejosaocalero2006
MTF EMA Engulf Retest NQ 1mMTF EMA Engulf + Retest strategy for NQ1! 1m. Uses EMA 13/48 cloud alignment across 5 timeframes (1m, 5m, 15m, 30m, 1H) as a trend filter — requires 4 of 5 TFs aligned green (bull) or red (bear) before a trade is considered. Entry logic: • Detects a bullish or bearish engulfing candle while cloud is aligned • Waits for price to pull back and retest the 13/48 cloud within 8 bars • Enters on the retest bar — long above cloud, short below • Invalidates if price closes beyond the engulf candle low (bull) or high (bear) Includes a live dashboard (top right) showing each TF cloud direction and VWAP bias. Optimized for NQ E-mini Futures on 1m chart. Default 10pt SL / 20pt TP (1:2 R:R).
Стратегия Pine Script®
от HeatSinc
Long/Short Signals for Trend Identification (15-Minute Chart)This is a Pine Script for long and short signals, visualized to help confirm the trends of the stocks I am considering. This chart combines the current price position based on LRL (280, 85, 33) with Bollinger Bands (30, 1.4). The key idea in using this chart is: When long or short signals are first detected, it may indicate a potential trend reversal. When signals continue to appear consecutively, it suggests a strong ongoing price trend. Periods with no signals can be interpreted as sideways movement, and it may be better to stay on the sidelines during these phases. I hope this can be even slightly helpful in your trading.
Индикатор Pine Script®
от hoonidada
ORB-PMH/L-TARGETSORB Breakout Signals — 15min Opening Range with CALLS/PUTS Labels, VWAP & MACD Filters This indicator plots the Opening Range (ORB) high, midpoint, and low using a customizable 15-minute session window (9:30–9:45 EST by default). When price breaks above the ORH or below the ORL after the range is established, the script prints a CALLS or PUTS label directly on the chart with full color and size customization. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ HOW IT WORKS ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ After the 9:30–9:45 opening range closes, the script locks in the ORH (high) and ORL (low) and begins monitoring price action. Two signal modes are available: IMMEDIATE MODE (Retest OFF): A CALLS label prints the moment price closes above the ORH. A PUTS label prints the moment price closes below the ORL. RETEST MODE (Retest ON): The script waits for a 3-step confirmation before printing any label: 1. Price closes above ORH (or below ORL) — initial breakout 2. Price pulls back and touches the level — the retest 3. Price closes back through the level again — confirmation This filters out false breakouts and only signals high-probability setups. Only one CALLS and one PUTS signal can fire per session — no spam. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ OPTIONAL FILTERS ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ All filters are OFF by default and can be toggled independently: VWAP Condition — CALLS only trigger if price is above the session VWAP. PUTS only trigger if price is below. VWAP resets at market open each day. MACD Condition — Uses standard 12/26/9 MACD. CALLS only trigger when the MACD line is above 0 and the signal line (bullish momentum). PUTS only trigger when MACD is below 0 and the signal line (bearish momentum). Confirm Retest — Requires a full retest and re-break of the ORH or ORL level before signaling, as described above. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ SIGNAL LABEL CUSTOMIZATION ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Under the Signal Labels group in settings: - CALLS background color (default green) - CALLS text color (default white) - PUTS background color (default red) - PUTS text color (default white) - Font size: Tiny / Small / Normal / Large / Huge - Label Offset: adjusts how far above (CALLS) or below (PUTS) the candle the label appears, in price points ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ORB LEVEL CUSTOMIZATION ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Each level (ORH, ORM, ORL) has independent controls for color, line width, and line style (solid, dashed, dotted). The OR highlight box color and opacity are also adjustable. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ BAR REPLAY / BACKTESTING FIX ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ A session.ismarket guard is built into the session detection logic. This prevents premarket bars from corrupting the ORH and ORL levels during TradingView Bar Replay, which is a common issue with other ORB scripts. Levels will always be accurate regardless of where replay starts. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ OTHER FEATURES ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ - Targets: Optional extension targets above ORH and below ORL based on a configurable % of the OR range. Adaptive or Extended display mode. - Session Moving Average: Optional EMA/SMA/RMA/WMA/VWMA that resets at the start of each session. - Show Historical Data toggle: Keep or clear previous session levels. - Custom time zone support for the OR session window. - Supports intraday timeframes only (will error if set to Daily or higher). ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ RECOMMENDED SETTINGS ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ - Timeframe: 1min, 2min, 3min, or 5min chart - Custom Range: ON, 9:30–9:45, UTC-4 (EDT) or UTC-5 (EST) - Start with all filters OFF to see raw breakout signals, then add filters one at a time based on your strategy Built for SPX and QQQ intraday trading. Works on any symbol with a defined regular session. Open-source script In true TradingView spirit, the creator of this script has made it open-source, so that traders can review and verify its functionality. Kudos to the author! While you can use it for free, remember that republishing the code is subject to our House Rules. OptionFlows Disclaimer The information and publications are not meant to be, and do not constitute, financial, investment, trading, or other types of advice or recommendations supplied or endorsed by TradingView. Read more in the Terms of
Индикатор Pine Script®
от OptionFlows
Period Marker█ OVERVIEW Period Marker divides a trading session into equal time intervals and draws vertical lines at each boundary. It also projects interval lines into the future, so upcoming divisions are visible before bars arrive. Useful for traders who structure their analysis around fixed time blocks within a session. █ FEATURES • Define a session with start time, end time, and timezone • Subdivide the session into 30-minute or 60-minute intervals • Vertical lines drawn at each interval boundary within the session • Optional session boundary lines at the start and end of the session • Future line projection draws upcoming interval lines ahead of price, updated in real time █ HOW TO USE 1 — Enable the marker and set your timezone 2 — Define the session window with Start and End times 3 — Choose the interval: 30 or 60 minutes 4 — Toggle "Show Boundary" to include or exclude lines at the session open and close 5 — Customize color, line style, and width to your preference █ NOTES Future projection lines are drawn from the last bar forward and update automatically. Only one time range marker is available in this version.
Индикатор Pine Script®
от qentis