Регистрация

Camarillapivots

[Pivots Consolidation Breakout Screener] with Alerts (TSO) This is a pivots consolidation screener indicator, with ability to choose up to 12 different symbols/instruments with alert to be notified when consolidation happens on either one with the new pivots formation (new R3(inner resistance) pivot formed below previous one and new S3(inner support) pivot formed above previous one). Once the alert on a certain symbol/instrument is received - there is an ability to set a Breakout alert for the consolidated symbol/instrument. This is a very powerful strategy, which doesn't happen often, but when happens - it often causes big moves after a breakout! NOTE: Every calculation is done on a confirmed closed candle bar state, so the indicator will never repaint! =========================================================================== Explanation of all the Features/Inputs/Settings --------------------------------------------------------------------------- >>> On the very top, please read the important NOTES/TIPs. >>> Next section is where the desired symbols can be turned on/checked to be screened for consolidation - the selected/checked symbols at creation of a 'Any alert() function call' alert will alert on any of the selected/checked symbols. Also, once consolidation forms, until next pivots formation - it will show it on the "Consolidation Stats" table. Once alerted on a specific symbol for consolidation - manual alert - 'Consolidation BREAKOUT' - can be created (MUST be done on the actual symbol chart, Right-Click > Add Alert) to be notified when actual breakout takes place. >>> Pivots Settings section is where a manual timeframe/length can be set for the pivots as by Default it uses "Daily" timeframe. So, if want to experiment with more signals, but less accurate - a smaller timeframe can be set for Pivots Timeframe with smaller chart timeframe. >>> Final section is simply the "Consolidation Stats" table location. =========================================================================== Adding Alerts in TradngView --------------------------------------------------------------------------- 1) Consolidation alert(s) for the selected/checked symbols - Select/check/find the desired symbols/instruments (when selecting symbols, make sure - they are from correct BROKER/SOURCE as pricing may differ between different brokers, causing confusion (under 1 broker/source, the symbol will be consolidated, under another it will not...)) -Right-click anywhere on any TradingView chart -Click on Add alert -Condition: Select this indicator by it’s name -Immediately below, change it to "alert() function calls only" -Expiration: Open-ended (that may require higher tier TradingView account, otherwise the alert will need to be occasionally re-triggered) -Alert name: Whatever you desire -Hit “Create” -Note: If you change ANY Settings within the indicator – you must DELETE the current alert and create a new one per steps above, otherwise it will continue triggering alerts per old Settings! * Once alert triggers, don't get confused, as it will show "Alert on SYMBOL", the SYMBOL will be where you created the major alert for all the symbols within the screener list! Within the alert, on the bottom, it will say: "EURUSD: Camarilla Pivots R3S3 Consolidation ALERT!" - this is where the correct symbol is for which the alert for consolidation was triggered! --------------------------------------------------------------------------- 2) Consolidation BREAKOUT alert(s) -Right-click anywhere on any TradingView chart -For the actual symbol (which got consolidated), open the chart (make sure timeframe is the same as with which "Consolidation alert(s)" were created prior), then Right-Click on the chart > Add Alert -Click on Add alert -Condition: Select this indicator by it’s name -Immediately below, change it to "Consolidation BREAKOUT1" -Expiration: Open-ended (that may require higher tier TradingView account, otherwise the alert will need to be occasionally re-triggered) -Alert name: Whatever you desire -Hit “Create” * It will alert when a breakout occurs in any direction - once you open the chart for the symbol/instrument for which alert has occurred - you can immediately see into which direction the breakout occured, it will be marked on the chart with green/red triangle. =========================================================================== If you have any questions or issues with the indicator, please message me directly via TradingView. --------------------------------------------------------------------------- Good Luck! (NOTE: Trading is very risky, past performance is not necessarily indicative of future results, so please trade responsibly!)
Индикатор Pine Script™
от tso_trade
2
[Camarilla Pivots] Signal Clean Up Analysis with Backtest (TSO)Camarilla Pivots NEW GEN Indicator! This is a full-cycle trading system indicator, which uses Camarilla Pivots for generating signals using a custom developed algorithm, TP (Take Profit) and SL (Stop Loss) levels. There are 3 SOURCES for signals (each can be used separately or in combination or all 3 can be used at the same time, each signal SOURCE is using Camarilla Pivots levels to open optimal trade direction) with chained (NOTE: There are many potential profitable setups available, by combining clean up features availabe in the indicator settings!) signal cleanup and analysis approach with scheduling and alerting capabilities. Works best with shorter timeframes: 1M, 5M, 15M, 1H. NOTE: Every calculation is done on a confirmed closed candle bar state, so the indicator will never repaint! NOTE: At position open - there will be calculated Take-Profit and Stop-Loss targets, however each target is considered hit, when candle bar closes breaking that target, so Take-Profit and Stop-Loss when hit will slightly differ then what you see at position open! =========================================================================== Explanation of all the Features | Configuration Guide | Indicator Settings | Signal Cleanup Analysis --------------------------------------------------------------------------- >>> Customizable Backtesting for a specific date range, results via TradingView strategy, which includes “Deep Backtesting” for largest amounts of data on trading results. >>> Trading Schedule with customizable trading daily time range, automatic closing/alert trades before Power Hour or right before market closes or leave it open until next day. >>> 3 Trading Systems. >>> Multiple Signal SOURCEs for opening trades, either SOURCE can be used or both at the same time! >>> Static/Dynamic Stop-Loss setups (HIGHLIGHT: Stop-Loss will be moved to Entry after TP1 is taken, which minimizes risk). >>> Single or Multiple profit targets (up to 5). >>> Take-Profit customizable offset feature (set your Take-Profit targets slightly before everyone is expecting it!). >>> Candle bar signal analysis (matching candle color, skip opposite structured and/or doji candle uncertain signals). >>> Additional analysis of VWAP/EMA/ATR/EWO (Elliot Wave Oscillator)/Divergence MACD+RSI/Volume signal confirmation (clean up your chart with indicator showing only the best potential signals!). >>> Advanced Alerts setup, which can be potentially setup with a trading bot over TradingView Webhook (NOTE: This will require advanced programming knowledge). =========================================================================== Labels, plots, colors explanations: --------------------------------------------------------------------------- >>>>> LONG open: green "house" looking arrow below candle bar. >>>>> SHORT open: red "house" looking arrow above candle bar. >>>>> LONG/SHORT take-profit target: green/red circles (multi-profit > TP2/3/4/5 smaller circles). >>>>> LONG/SHORT stop-loss target: green/red + crosses. >>>>> LONG/SHORT take-profit hits: green/red diamonds. >>>>> LONG/SHORT stop-loss hits: green/red X-crosses. >>>>> LONG/SHORT EOD (End of Day | Intraday style) close (profitable trade): green/red squares. >>>>> LONG/SHORT EOD (End of Day | Intraday style) close (loss trade): green/red PLUS(+)-crosses. =========================================================================== Date Range and Trading Schedule Settings --------------------------------------------------------------------------- >>>>> Date Range: Select your start and/or end dates (uncheck “End” for indicator to show results up to the very moment and to use for LIVE trading) for backtesting results, if not using backtesting – uncheck “Start”/“End” to turn it off. >>>>> Use TradingView “Strategy Tester” to see backtesting results NOTE: If Strategy Tester does not show any results with Date Ranged fully unchecked, there may be an issue where a script opens a trade, but there is not enough TradingView power to set the Take-Profit and Stop-Loss and somehow an open trade gets stuck and never closes, so there are “no trades present”. In such case you will need to manually check “Start”/“End” dates or use “Depp Backtesting” feature! >>>>> Trading Schedule: This is where you can setup Intraday Session or any custom session schedule you wish. Turn it ON. Select trading hours. Select EOD (End of Day) setting (NOTE: If it will be OFF, the indicator will assume you are holding your position open until next day!). Please note the EOD trade closure times with the 2 different Intraday close settings when turned on: At Market Close: 1/3/5min > will close at 15:55pm ET 15min > will close at 15:45pm ET 30min > will close at 15:30pm ET 45min > will close at 15:45pm ET 60min > will close at 15:00pm ET Before Power Hour: 1/3/5min > will close at 15:00pm ET 15min > will close at 15:00pm ET 30min > will close at 15:00pm ET 45min > will close at 15:00pm ET 60min > will close at 15:00pm ET >>> Trading Systems: 1) "Open Until Closed by TP or SL": the signal will only open a trade if no trades are currently open/trunning, a trade can only be closed by Take Profit, Stop Loss or End of Day close (if turned on) | 2) "Open Until Closed by TP or SL + OCA": Same as 1), but if there is an opposite signal to the trade which is currently open > it will immediately be closed with new trade open or End of Day close (if turned on) | 3) "OCA (no TP or SL)": There are is Take Profit or Stop Loss, only an opposite signal will close current trade and open an opposite one or End of Day close (if turned on). >>> Position Open sources: >>>>> Position Open - SOURCE1 | LONG: S3, SL: S4, TP1: R3, TP2: R4, TP3: R5, TP4/5: Smart Formula | SHORT: R3, SL: R4, TP1: S3, TP2: S4, TP3: S5, TP4/5: Smart Formula >>>>> Position Open - SOURCE2 | LONG: R4, SL: R3, TP1: R5, TP2/3/4/5: Smart Formula | SHORT: S4, SL: S3, TP1: S5, TP2/3/4/5: Smart Formula >>>>> Position Open - SOURCE3 | LONG: R5, SL: R4, TP1/2/3/4/5: Smart Formula | SHORT: S5, SL: S4, TP1/2/3/4/5: Smart Formula >>> Turn On/Off: Current Position SL + Opposite Position Open Signal on the same closing candle bar (If current trade hits Stop-Loss and at that same closing candle bar there is a signal for an opposite direction trade > indicator will close current position as Stop-Loss and immediately open an opposite position). NOTE: With this option turned on, there will be more trades, but not necessarily better results, since after Stop-Loss is hit, it may make sense to wait a little before opening an opposite trade, even if it matches the condition at the same time when Stop-Loss is hit, but sometimes it shows great results, so this setting/feature is included. >>> Turn On/Off: Turn On/Off: Current Position REGULAR SL | Only the SL + Opposite Position Open will trigger if turned on, IF NOT - THERE WILL BE NO STOP-LOSS AT ALL!!! NOTE: It is very dangerous to trade without Stop-Loss! >>>>> Signal Candle Bar consuming Take-Profits - position/trade signal candle bar is big enought to "consume"/close ahead the first TP setting > the signal can either be skipped, or all Take-Profit areas pushed ahead using smart formula) >>>>> MULTIPROFIT | TP (Take-Profit) System: Once the trade is open, all Take-Profit target(s) are immediately calculated and set for the trade > once the target(s) is hit > trade will be partially closed (if candle bar closes beyond several Take-Profit targets > trade will be reduced accordingly to the amount of how many Take-Profit targets were hit) >>>>> MULTIPROFIT | SL (Stop-Loss) System: 1) Static – Once the trade is open, Stop-Loss is calculated and set for the remaining of the trade ||| 2) Dynamic – At trade open, Stop-Loss is calculated and set the same way, however once 1st Take-Profit is taken > Stop-Loss is moved to Entry, reducing the risk. >>>>> # of TPs (number of take profit targets): Just like it is named, this is where you select the number of Take-Profit targets for your trading system (NOTE: If "OCA (no TP or SL)" Trading System is selected, this setting won’t do anything, since there are no TP or SLs for that system). >>>>> TP(s) offset: This is a special feature for all Take-Profit targets, where you can turn on a customizable offset, so that if the price is almost hitting the Take-Profit target, but never actually touches it > you will capture it. This is good to use with HHLL (Highest High Lowest Low), which is pretty much a Support/Resistance as often the price will nearly touch these strong areas and turn around… =========================================================================== Signal Analysis and Cleanup Settings --------------------------------------------------------------------------- >>>>> Candle Analysis | Candle Color signal confirmation: If closed candle bar color does not match the signal direction > no trade will be open. >>>>> Candle Analysis | Skip opposite candle signals: If closed candle bar color will match the signal direction, but candle structure will be opposite (for example: bearish green hammer, long high stick on top of a small green square) > no trade will be open. >>>>> Candle Analysis | Skip doji candle signals: If closed candle bar will be the uncertain doji > no trade will be open. >>>>> Divergence/Oscillator Analysis | EWO (Elliot Wave Oscillator) signal confirmation: LONG will only be open if at signal, EWO is green or will be at bullish slope (you can select which setting you desire), SHORT if EWO is red or will be at bearish slope. >>>>> Divergence/Oscillator Analysis | VWAP signal confirmation: LONG will only be open if at signal, the price will be above VWAP, SHORT if below. >>>>> Divergence/Oscillator Analysis | Moving Average signal confirmation: LONG will only be open if at signal, the price will be above selected Moving Average, SHORT if below. >>>>> Divergence/Oscillator Analysis | ATR signal confirmation: LONG will only be open if at signal, the price will be above ATR, SHORT if below. >>>>> Divergence/Oscillator Analysis | RSI + MACD signal confirmation: LONG will only be open if at signal, RSI + MACD will be bullish, SHORT if RSI + MACD will be bearish. >>>>> Volume signal confirmation: LONG/SHORT will only be opened with strong Volume matching the signal direction, by default, strong Volume percentage is set to 150% and weak to 50%, but you can change it as you desire. =========================================================================== ||||||||||||||||||||||||||||||||||| *** ||||||||||||||||||||||||||||||||||| *** ||||||||||||||||||||||||||||||||||| ||||||||||||||||||||||||||||||||||| *** ||||||||||||||||||||||||||||||||||| *** ||||||||||||||||||||||||||||||||||| TP System - VERY IMPORTANT INFO! ------------------------------------------------------------------------------------------------------------------- "TP PERCENTAGE" - amount by which current trade/position needs to be reduced/partially closed/sold. ------------------------------------------------------------------------------------------------------------------- TP System: Dynamic "TP PERCENTAGE" - will always be the same amount (trade/position size divided by the # of take-profit(TP) targets) and percentage to be closed will always be of the ORIGINAL trade/position. ------------------------------------------------------------------------------------------------------------------- TP System: Static "TP PERCENTAGE" - will always be the same amount IF take-profit(TP) targets are hit 1-by-1 (TP1 > TP2 > TP3 > TP4 > TP5), otherwise it will vary and unless it is a 1st take-profit(TP1), the REMAINING trade/position size will always be smaller than original and therefore the percentage to be closed will always be of the REMAINING trade/position and NOT the original one! ------------------------------------------------------------------------------------------------------------------- "TP PERCENTAGE" CheatSheet (these are the only percentages you may see) ----------------------------------------------------------------------- TP PERCENTAGE---Close/Sell Amount-------------Example (trade size: 50 stocks) 20%-------------trade size * 0.2--------------50 * 0.2 = 10 stocks 25%-------------trade size * 0.25-------------50 * 0.25 = 12.5(~13) stocks 34%-------------trade size * 0.34-------------50 * 0.34 = 17 stocks 40%-------------trade size * 0.4--------------50 * 0.4 = 20 stocks 50%-------------trade size * 0.5--------------50 * 0.5 = 25 stocks 60%-------------trade size * 0.6--------------50 * 0.6 = 30 stocks 66%-------------trade size * 0.66-------------50 * 0.66 = 33 stocks 75%-------------trade size * 0.75-------------50 * 0.75 = 37.5(~38) stocks 80%-------------trade size * 0.8--------------50 * 0.8 = 40 stocks 100%------------trade size--------------------50 = 50 stocks ----------------------------------------------------------------------- If for any reason a portion of the current/remaining trade closed at such occurrence was slightly wrong, it is not an issue. Such occurrences are rare and with slight difference in partial TP closed is not significant to overall performance of our algorithms. ||||||||||||||||||||||||||||||||||| *** ||||||||||||||||||||||||||||||||||| *** ||||||||||||||||||||||||||||||||||| ||||||||||||||||||||||||||||||||||| *** ||||||||||||||||||||||||||||||||||| *** ||||||||||||||||||||||||||||||||||| Alert Settings (you don’t have to touch this section unless you will be using TradingView alerts through a Webhook to use with trading bot) --------------------------------------------------------------------------- Here is how a LONG OPEN alert looks like. NOTE: Each label , , etc. is customizable, you can change the text of it within indicator Input settings. ALERT >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> COIN: BTCUSD TIMEFRAME: 15M LONG: OPEN ENTRY: 20000 TP1: 20500 TP2: 21000 TP3: 21500 TP4: 22500 TP5: 23500 SL: 19000 Leverage: 0 --------------------------------------------------------------------------- Here is how a TP1 alert will look with 5 TPs breakdown of the trade. NOTE1: Next to TP1 taken it will show at which price it was triggered. NOTE2: Next to "TP Percentage" it shows how much of the CURRENT/ACTIVE/REMAINING trade needs to be closed. NOTE2: If TP2/3/4/5 comes before TP1 - the alert will tell you exactly how many percent of the trade needs to be closed! ALERT >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> COIN: BTCUSD TIMEFRAME: 15M LONG: TP1 TP1: 20500 TP Percentage: 20% --------------------------------------------------------------------------- Here is how an alert will look for LONG - STOP-LOSS. ALERT >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> COIN: BTCUSD TIMEFRAME: 15M ENTRY: 20000 LONG: SL SL: 19000 --------------------------------------------------------------------------- Here is how an alert will look for LONG - EOD (End of Day) In Profit close. ALERT >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> COIN: BTCUSD TIMEFRAME: 15M LONG: EOD-Close (profit) ENTRY: 20000 EOD-Close: 21900 =========================================================================== Adding Alerts in TradngView --------------------------------------------------------------------------- -Add indicator to chart and make sure it is configured (check back-testing results) -Right-click anywhere on the TradingView chart -Click on Add alert -Condition: Select this indicator by it’s name -Alert name: Whatever you want -Hit “Create” -Note: If you change ANY Settings within the indicator – you must DELETE the current alert and create a new one per steps above, otherwise it will continue triggering alerts per old Settings! =========================================================================== If you have any questions or issues with the indicator, please message me directly via TradingView. --------------------------------------------------------------------------- Good Luck! (NOTE: Trading is very risky, past performance is not necessarily indicative of future results, so please trade responsibly!) --------------------------------------------------------------------------- NOTE: There seems to be a strange glitch when strategy is running live, it will show "double-take" take-profits labels on the chart. This is not affecting the script logic and backtesting results, if you will remove/re-add the script afterwards, it will no longer show the duplicate orders... this must be some sort of a glitch as every alert was thoroughly tested to make sure everything is working!
Стратегия Pine Script™
от tso_trade
7
Rolling Pivot PointsStandard Pivot Points are calculated from the previous day’s (week/month/year) close/low/high values. But what is the day close for cryptocurrencies trading 24/7 on exchange? Does it make sense to use a specific time price as a close if it continues trading after that? So I solved that issue with Rolling Pivot Points, where I calculate pivot points not at the end of the period but for every bar on a rolling basis. Every time I recalculate pivot points, I look at a window of period length in bars and base my calculations on these bars. This way, you get smooth pivot points changing with every bar, and it should better represent support and resistance for the price. In this indicator, I implement three types of pivot points. Camarilla Fibonacci Traditional In terms of period, you can select any one you want. If you’ll keep Auto Indicator well, compute period automatically. For two days, for example, use ‘Day’ in Period and 2 in Period Mult parameters. You can also change the type of MA used to smooth Pivot Points. Disclaimer Please remember that past performance may not be indicative of future results. Due to various factors, including changing market conditions, the strategy may perform less well than in historical backtesting. This post and the script don’t provide any financial advice.
Индикатор Pine Script™
от QuantNomad
10
Waddah Attar Weekly Camarilla Pivots [Loxx]Waddah Attar Weekly Camarilla Pivots is an indicator built by Ahmad Waddah Attar that draws weekly Camarilla over lower timeframes. What are Camarilla pivots? Camarilla Pivot Points is a math-based price action analysis tool that generates potential intraday support and resistance levels. Similar to classic pivot points, it uses the previous day's high price, low price, and closing price. Camarilla Pivot Points is a modified version of the classic Pivot Point. Camarilla Pivot Points were introduced in 1989 by Nick Scott, a successful bond trader. The basic idea behind Camarilla Pivot Points is that price has a tendency to revert to its mean until it doesn’t. What makes it different than the classic pivot point formula is the use of Fibonacci numbers in its calculation of pivot levels. Camarilla Pivot Points is a math-based price action analysis tool that generates potential intraday support and resistance levels. Details -Used for intraday trading to identify support/resistance levels -Restricted to timeframes 4 hours and below -Unlike most versions of Weekly Camarilla Pivots, this version allows you to customize the Fibonacci levels
Индикатор Pine Script™
от loxx
4
20 Camarilla Pivot PointsThis indicator plots 20 Camarilla pivot points above and below the pivot based on the selected time frame. This is useful when price goes between the standard 3 and 4 pivots and above 4. Note that the normal 4 pivot point is labeled as 6 in this indicator. You can change the color of each set of pivots so you can mark the standard Camarilla pivots if you wish. The image is using monthly Camarilla pivots on a 1 hour time frame.
Индикатор Pine Script™
от MrWiggins
1