Multi Timeframe Traffic LightsMonthly, Weekly, Daily, Hourly previous candle range vs current price. Inside = orange, above = green, below = red
Candlestick analysis
Weekly Inside Bar LTEShows weekly inside bar on lower timeframes so you can create breakout and failure zones
Weekly Inside Bar LTEshow weekly inside bar on lower timeframe so you can use for breakouts and breakout failures
Monday Range Levels (Fixed for Forex/XAU)Monday Range Levels Indicator (10-Line Summary)
1. Core Purpose: Defines the initial weekly range in Forex and XAU/USD for structured trading.
2. Range Definition: Automatically plots the High and Low price levels from the first hours of the 3. Monday session.
4. Liquidity Focus: Used primarily to anticipate liquidity sweeps at the start of the trading week.
5. Specific Market: Optimized for high-volatility pairs, especially XAU/USD (Gold) and major Forex pairs.
6. Session Control: Accurately identifies the start of the week regardless of local settings.
7. Timezone Customization: Allows flexible adjustment to NY Time, UTC, or UTC+7 (Vietnam Time).
8. Visual Clarity: Full customization options for line colors, text size, and range shading.
9. Strategic Use: Supports Breakout Trading and Mean Reversion strategies throughout the week.
10. Discipline Tool: Encourages structured trading by providing fixed, objective reference levels.
Application: Simple, reliable tool for consistent Day Trading and Scalping.
"If I get enough love/support, I'll be dropping more indicators for the fam!"
TQQQ Vibha Strategy – Auto Ranges + Rally Days1. Buy only after an intermediate bottom
A 20-day lowest low becomes the potential bottom.
2. Wait 3–4 days of higher highs & higher lows
higherSeq logic enforces that.
3. Avoid buying when too extended from the 200-day
Enforced with:
close <= ma200 * (1 + maxExtension) (default 10%)
4. Must close back above 200-day
Needed for “change of character”
5. Sell immediately if price breaks the Day-1 rally low (“line in the sand”)
Script sets lineInSand = bottom low
If price undercuts → close position immediately
6. Range-top rejection
Track touches of range top (highest high since bottom)
Three failures = sell (“3 strikes rule”)
Correlation Scanner📊 CORRELATION SCANNER - Financial Instruments Correlation Analyzer
🎯 ORIGINALITY AND PURPOSE
Correlation Scanner is a professional tool for analyzing correlation relationships between different financial instruments. Unlike standard correlation indicators that show the relationship between only two instruments, this script allows you to simultaneously track the correlation of up to 10 customizable instruments with a selected base asset.
The indicator is designed for traders working with cross-market analysis, portfolio diversification, and searching for related assets for arbitrage strategies.
🔧 HOW IT WORKS
The indicator uses the built-in ta.correlation() function to calculate the Pearson correlation coefficient between instrument closing prices over a specified period. Mathematical foundation:
1. Correlation Calculation: for each instrument, the correlation coefficient with the base asset is calculated over N bars (default 60)
2. Results Sorting: instruments are automatically ranked by absolute correlation value (from strongest to weakest)
3. Visualization: results are displayed in a table with color coding:
- Green: positive correlation (instruments move in the same direction)
- Red: negative correlation (instruments move in opposite directions)
- Color intensity depends on correlation strength
4. Correlation Strength Classification:
- Very Strong (💪💪💪): |r| > 0.8 — very strong relationship
- Strong (💪💪): |r| > 0.6 — strong relationship
- Medium (💪): |r| > 0.4 — medium relationship
- Weak: |r| > 0.2 — weak relationship
- Very Weak: |r| ≤ 0.2 — very weak relationship
📋 SETTINGS AND USAGE
MAIN PARAMETERS:
• Main Instrument — base instrument for comparison (default TVC:DXY - US Dollar Index)
• Correlation Period — calculation period in bars (10-500, default 60)
• Number of Instruments to Display — number of instruments to show (1-10)
• Table Position — table location on the chart
INSTRUMENT CONFIGURATION:
The indicator allows configuring up to 10 instruments for analysis. For each, you can specify:
• Instrument — instrument ticker (e.g., FX_IDC:EURUSD)
• Name — display name (emojis supported)
VISUAL SETTINGS:
• Show Chart Label with Correlation — display current chart's correlation with base instrument
• Table Header Color — table header color
• Table Row Background — table row background color
💡 USAGE EXAMPLES
1. DOLLAR IMPACT ANALYSIS: set DXY as the base instrument and track how dollar index changes affect currency pairs, gold, and cryptocurrencies
2. HEDGING ASSETS SEARCH: find instruments with strong negative correlation for risk diversification
3. PAIRS TRADING: identify assets with high positive correlation to find divergences and arbitrage opportunities
4. CROSS-MARKET ANALYSIS: track relationships between stocks, bonds, commodities, and currencies
5. SYSTEMIC RISK ASSESSMENT: identify periods of increased correlation between assets, which may indicate systemic risks
⚠️ IMPORTANT NOTES
• Correlation does NOT imply causation
• Correlation can change over time — regularly review the analysis period
• High past correlation doesn't guarantee the relationship will persist in the future
• Recommended to use the indicator in combination with fundamental analysis
🔔 ALERTS
The indicator includes a built-in alert condition: triggers when strong correlation (|r| > 0.8) is detected between the current chart and the base instrument.
Wick Size Percentage (%) IndicatorA lightweight utility script that measures the wick size of every bar in percentages. It helps identify significant rejection blocks and volatility spikes by displaying the exact % value above and below each candle. Perfect for ICT concepts and precise risk management.
This indicator is designed for price action traders who need precise measurements of market volatility and rejection. It automatically calculates and displays the size of both the upper and lower wicks of a candle as a percentage relative to the open price.
Key Features:
Dual Measurement: Separately calculates the upper wick (high to body) and lower wick (body to low).
Percentage Based: Values are shown in percentages (%) rather than price points, making it easier to compare volatility across different assets (Crypto, Forex, Stocks).
Dynamic Labels: Visual labels appear above and below the candles for quick reading.
Fully Customizable: Users can adjust the decimal precision (e.g., for low timeframe scalping), change text size, and toggle visibility to keep the chart clean.
Data Window Support: Values are also visible in the side Data Window for detailed analysis without clutter.
ATOMO SNRAUTO plot 1 hour support to resistencce and resistance to support levels as break out line with red levels for shorts and yellow level for long
designed to mark htf snr structure while we executed entries on a 5 mins time frame
MACD Cross Long/Short Alert📌 MACD Cross Long/Short Alert — Indicator Description
📌 MACD 上/下穿信号线提醒指标说明
🇺🇸 English Description
This indicator provides clean and actionable MACD cross alerts, designed for traders who need quick “long/short” signals based on MACD line and Signal line interactions.
Key Features
Standard MACD Calculation
Uses customizable Fast EMA, Slow EMA, and Signal EMA.
Cross-Based Trading Signals
Bullish Cross (MACD crossover Signal) → Long setup
Bearish Cross (MACD crossunder Signal) → Short setup
Chart Markers
Triangles plotted directly on the chart for fast visual recognition.
Built-in Alerts
Automatically triggers alerts when MACD crosses above/below the signal line.
Works with any timeframe and any asset.
Use Cases
Intraday trend reversal detection
Momentum confirmation
Breakout retest validation
Simple auto-trading signal for strategies/robots
Quick scalp entries on 5m/10m/30m
This MACD tool is ideal for traders who need a fast, reliable long/short trigger without unnecessary complexity.
🇨🇳 中文说明
本指标提供 MACD 上穿/下穿信号线的即时做多/做空提醒，适用于所有周期与品种，是一个简洁、实用的趋势转折信号工具。
主要功能
标准 MACD 计算
快线 EMA、慢线 EMA、Signal EMA 均可自定义。
交叉交易信号
上穿 Signal → 多头信号（做多）
下穿 Signal → 空头信号（做空）
图表标记
图中自动绘制上/下三角形，方便肉眼快速发现信号。
内置警报提醒
自动推送 MACD 上下穿事件，可用于：
APP 推送
邮件提醒
自动化策略触发
日内做单提醒
适用场景
日内反转捕捉（5m / 10m / 30m）
动量确认
趋势切换点识别
回踩/突破后的方向确认
自动交易机器人信号源
Weekly Inside Bar Zoneweekly inside bar on lower timeframe charts creates zones for breakout and failures
First Session Candle (Transparent Label) Change timezone & more"Global First Candle Rule: Session Refinement Tool"
"This tool/template is designed to apply the First Candle Rule across the world's three major trading sessions: New York (NYO), Asia (AO), and London (LO).
It uses New York Time (NY) as the default reference, but the timezone can be easily adjusted to UTC or UTC+7 (Vietnam Time).
🎁 Free for the community!"
Volumetric Inverse Fair Value Gap (IFVG) [Kodexius]The Volumetric Inverse Fair Value Gap (IFVG) indicator detects and visualizes inverse fair value gaps (IFVGs) zones where previous inefficiencies in price (fair value gaps) are later invalidated or “inverted.”
Unlike traditional FVG indicators, this tool integrates volume-based analysis to quantify the bullish, bearish, and overall strength of each inversion. It visually represents these metrics within a dynamically updating box on the chart, giving traders deeper insight into market reactions when liquidity imbalances are filled and reversed.
Features
Inverse fair value gap detection
The script identifies bullish and bearish fair value gaps, stores them as pending zones, and turns them into inverse fair value gaps when price trades back through the gap in the opposite direction. Each valid inversion becomes an active IFVG zone on the chart.
Sensitivity control with ATR filter and strict mode
A minimum gap size based on ATR is used to filter out small and noisy gaps. Strict mode can be enabled so that any wick contact between the relevant candles prevents the gap from being accepted as a fair value gap. This lets you decide how clean and selective the zones should be.
Show Last N Boxes control
The indicator can keep only the most recent N IFVG zones visible. Older zones are removed from the chart once the number of active objects exceeds the user setting. This prevents clutter on higher timeframes or long histories and keeps attention on the most relevant recent zones.
Ghost box for the original gap
When the ghost option is enabled, the script draws a faint box that marks the original fair value gap from which the inverse zone came. This makes it easy to see where the initial imbalance appeared and how price later inverted that area.
Volumetric bull, bear and strength metrics
For each IFVG, the script estimates how much of the bar volume is associated with buying and how much with selling, then computes bull percentage, bear percentage and a strength score that uses a percentile rank of volume. These values are stored with the IFVG object and drive the visualization inside the zone.
Three band visual layout inside each IFVG
Each active IFVG is drawn as a container with three horizontal sections. The top band represents the bull percentage, the middle band the bear percentage and the bottom band the strength metric. The width of each bar reflects its respective value so you can read the structure of the zone at a glance.
Customizable colors and label text
Colors for bull, bear, strength, the empty background area, the ghost box and label text can be adjusted in the inputs. This allows you to match the indicator to different chart themes or highlight specific aspects such as strength or direction.
Automatic invalidation and cleanup
When price clearly closes beyond the IFVG in a way that breaks the logic of that zone, the script marks it as inactive and deletes all boxes and labels linked to it. Only valid and active IFVGs remain on the chart, which keeps the display clean and focused.
Calculations
1. Detecting Fair Value Gaps (FVGs)
A fair value gap is identified when price action leaves an imbalance between candle wicks. Depending on the mode:
Bullish FVG: When low > high
Bearish FVG: When high < low
Optionally, the strict mode ensures wicks do not touch.
The gap’s significance is filtered using the ATR multiplier input to exclude minor noise.
Once detected, FVGs are stored as pending zones until inverted by opposite movement (price crossing through).
bool bull_cond = strict_mode ? (low > high ) : (close > high )
bool bear_cond = strict_mode ? (high < low ) : (close < low )
float gap_size = 0.0
if bull_cond and close > open
gap_size := low - high
if bear_cond and close < open
gap_size := low - high
2. Creating IFVGs (Inversions)
When price later moves through a previous FVG in the opposite direction, an Inverse FVG (IFVG) is created.
For example:
A previous bearish FVG becomes bullish IFVG if price moves upward through it.
A previous bullish FVG becomes bearish IFVG if price moves downward through it.
The IFVG is initialized with structural boundaries (top, bottom) and timestamp metadata to anchor visualization.
if not p.is_bull_gap and close > p.top
inverted := true
to_bull := true
if p.is_bull_gap and close < p.btm
inverted := true
to_bull := false
3. Volume Metrics (Bull, Bear, Strength)
Each IFVG calculates buy and sell volumes from the current bar’s price spread and total volume.
Bull % = proportion of upward (buy) volume
Bear % = proportion of downward (sell) volume
Strength % = normalized percentile rank of total volume
These are obtained through a custom function that estimates directional volume contribution:
calc_metrics(float o, float h, float l, float c, float v) =>
float rng = h - l
float buy_v = 0.0
if rng == 0
buy_v := v * 0.5
else
if c >= o
buy_v := v * ((math.abs(c - o) + (math.min(o, c) - l)) / rng)
else
buy_v := v * ((h - math.max(o, c)) / rng)
float sell_v = v - buy_v
float total = buy_v + sell_v
float p_bull = total > 0 ? buy_v / total : 0
float p_bear = total > 0 ? sell_v / total : 0
float p_str = ta.percentrank(v, 100) / 100.0
Double candle engulfing (Optimized)Double Engulfing Pattern Detector (DELO)
This indicator identifies strong trend reversal signals by detecting the confirmation of two consecutive Engulfing Candlestick Patterns.
✨ Key Features:
Bullish Engulfing: Triggers a Buy Signal when two consecutive bullish engulfing patterns are confirmed.
Bearish Engulfing: Triggers a Sell Signal when two consecutive bearish engulfing patterns are confirmed.
Trillotron 5000 Checklist AssistantTrillotron 5000’s Checklist Assistant is a complete multi-factor trading confirmation system designed to help traders avoid low-quality entries and only take high-probability setups.
The indicator evaluates market structure, multi-timeframe EMA alignment, volume, ATR, key levels, and candle confirmation to determine whether a chart meets the full criteria for a CALL (bullish) or PUT (bearish) setup.
When all conditions align, the indicator highlights the chart with a colored background (green for CALL, red for PUT) and prints a clear signal label on the bar. This tool helps reinforce discipline, reduce impulsive trades, and support consistent decision-making across all timeframes.
MM Wash Detector (Discreet)MM Wash Detector identifies weekly liquidity sweeps created by market makers.
It highlights two conditions:
Bull Wash – price wicks above the weekly range to grab liquidity, then reverses
Bear Wash – price wicks below the weekly range to grab liquidity, then reverses
This tool is designed for traders who want to spot engineered stop-hunts, liquidity grabs, and manipulation pockets where reversals often begin.
Labels are intentionally discreet for minimal chart clutter.
✅ 2. Short & Simple
Shows when market makers sweep liquidity above or below the weekly range.
Bull Wash = liquidity grab above
Bear Wash = liquidity grab below
Discreet labels. No clutter.
✅ 3. Aggressive / Smart-Money Style
Tracks weekly stop-hunts engineered by smart money.
A “Wash” prints when price creates an exaggerated wick outside the weekly range with a small body and volume confirmation.
These zones often mark liquidity collection before a reversal or displacement move.
✅ 4. Beginner-Friendly
This indicator helps you see when the price makes a long wick above or below the weekly candle — a sign that big players might be triggering stops and collecting liquidity.
These liquidity grabs are often followed by a reversal.
Bull Wash = sweep above
Bear Wash = sweep below
Diganta Trend MTF 10 MIn / 2 MinThe Script does the following :
Buy Condition - Blue Dot gets plotted
1. On both 10 mins and 2 Mins TF
2. Close above 33 ema high
3. RSI > 55
4. +di > -Di & +di > 25
Sell Conditions - Red Dot gets plotted
1. On both 10 mins and 2 Mins TF
2. Close below 33 ema low
3. RSI < 45
4. -di > +Di & -di > 25
Diganta ATR LevelsThis Script Plots the ATR levels based on the following logic
1. The Open price of 9.15 is considered.
2. Then based on the Open Price the ATR levels are plotted.
3. The ATR length is 180
4. ATR multiplier is 1 ( extended by 25% on both sides)
🚀 Enhanced BUY & SELL Pullback Scanner🚀 Enhanced BUY & SELL Pullback Scanner🚀 Enhanced BUY & SELL Pullback Scanner🚀 Enhanced BUY & SELL Pullback Scanner🚀 Enhanced BUY & SELL Pullback Scanner🚀 Enhanced BUY & SELL Pullback Scanner🚀 Enhanced BUY & SELL Pullback Scanner🚀 Enhanced BUY & SELL Pullback Scanner🚀 Enhanced BUY & SELL Pullback Scanner🚀 Enhanced BUY & SELL Pullback Scanner🚀 Enhanced BUY & SELL Pullback Scanner🚀 Enhanced BUY & SELL Pullback Scanner🚀 Enhanced BUY & SELL Pullback Scanner
🚀 Enhanced BUY & SELL Pullback ScannerThis script help to find the scan the script. this sis dor testing
MACD nothing newThere’s nothing new in this indicator, but I strongly recommend hiding the signal line and the histogram.
MA CrossMA Cross indicator is a multi-MA indicator that saves indicator quota when you need several MAs.
EMA CrossEMA Cross indicator is a multi-EMA indicator that saves indicator quota when you need several EMAs.
