Регистрация

Графические паттерны

Baby ICT Simple Asia H/L + Sweeps + FVG + Alerts + Do-NothingBaby ICT Simple+ is a lightweight, rules-based TradingView indicator designed to help traders visualize key ICT-style concepts without complexity or signal-chasing. It focuses on Asia session liquidity, after, and fair value gapsto su This tool is intentionally simple and is meant to be used alongside session timing, price action, and risk management — not as a buy/sell signal generator. 🔍 What This Indicator Displays But Automatically tracks and plots the Asia session high and low Fully customizable line colors and width These levels often act as liquidity pools before London and New York sessions Liquidity Sweeps (Post-Asia) Identifies the first time price takes liquidity above or below the Asia range Sweep detection can be based on wicks or closes Optional sweep labels help highlight potential stop-run behavior Asia Break & Sweep Alerts Alerts when price breaks the Asia high or low after the Asia session ends Optional alerts for the first sweep only, helping traders focus on high-quality context Fair Value Gaps (FVGs) Detects classic 3-candle price imbalances on the active timeframe Optional filter to show only FVGs that form after a liquidity sweep Bullish and bearish FVGs are fully customizable with separate fill and border colors “Do Nothing” Discipline Labels Optional warning labels during a user-defined kill zone Designed to discourage over-trading when: No liquidity has been taken Price is stuck mid-range A sweep occurred but no clean displacement or fresh FVG followed 🧠 Intended Use This indicator supports a “Baby ICT” approach, emphasizing: Waiting for liquidity to be taken before looking for entries Using Fair Value Gaps as entry zones, not signals Avoiding mid-range and low-probability environments Trading primarily during active sessions (London / New York) Best used on: 5-minute charts Index futures (ES, NQ) or liquid FX pairs With session-based execution and strict risk control 🚫 What This Indicator Is NOT ❌ Not a buy/sell signal tool ❌ Not an automated trading strategy ❌ Not predictive or guaranteed All trade decisions remain the responsibility of the trader. ⚠️ Risk Disclaimer Trading involves risk. This indicator is provided for educational and informational purposes only and does not constitute financial advice. Always manage risk responsibly and test any tool thoroughly before using it in live markets. ✨ Final Notes If you are looking for a clean, non-hype way to visualize: Where liquidity is likely taken Where price may rebalance When it’s best to stand aside Baby ICT Simple+ was built for that purpose.
Индикатор Pine Script®
от TradimgTechie
The Vector Alignment Matrix (VAM) - Pivot ExitIndicator Description: The Vector Alignment Matrix (VAM) – Pivot Exit Edition The Vector Alignment Matrix (VAM) is an institutional-grade technical analysis tool designed for TradingView. It operates as a trend-following confluence engine, ensuring that lower-timeframe execution only occurs when supported by the "Weight of the Market"—the high-timeframe trend. By automating the "Top-Down Analysis" methodology, VAM removes trader subjectivity and provides a clear, mechanical framework for entries and exits based on market structure. Core Mechanics 1. The Global Matrix (HTF Alignment) The indicator continuously monitors three critical timeframes: the Weekly (W), Daily (D), and 4-Hour (4H). It uses a price-relative-to-range calculation to determine if the trend is Bullish or Bearish. A "Matrix Bias" is established only when at least two of these timeframes agree. This bias acts as a safety switch: if the Matrix is BULLISH, the indicator will ignore all sell signals, and vice versa. 2. Vector Execution (Break of Structure) Once a bias is confirmed, the VAM looks for a Break of Structure (BOS) on the chart you are actively viewing. It identifies significant Pivot Highs and Pivot Lows. A signal is generated when price closes beyond a pivot in the direction of the Matrix Bias. This represents the moment the market "reveals its hand," confirming that the high-timeframe momentum is being absorbed by the lower timeframe. 3. Dynamic Pivot-Targeting (The Exit) Unlike standard indicators that use arbitrary math for targets, the VAM uses Organic Exits. Take Profit (TP): The indicator identifies the previous significant pivot level (resistance for longs, support for shorts) and sets it as the target. Stop Loss (SL): The protective stop is anchored to the most recent opposing pivot, protecting the trade behind a structural barrier.
Индикатор Pine Script®
от day_trade_mind
Structura Candles Volume 1 v1.0█ OVERVIEW Structura Candles Volume 1 is an advanced candlestick pattern recognition indicator based on the research methodology of Thomas N. Bulkowski's "Encyclopedia of Candlestick Charts." This indicator identifies 19 statistically-validated candlestick patterns and provides real-time backtesting against your current chart. █ METHODOLOGY Unlike traditional candlestick indicators that rely on theoretical pattern behavior, this script implements Bulkowski's empirical approach: - Trend Detection: 10-period EMA to define short-term trend context - Tall Candle Filter: 146% of 22-day average height threshold (statistically significant candles) - Breakout Confirmation: Tracks whether price breaks above pattern high or below pattern low within a user-defined window - Non-Repainting: Signals only confirm on bar close █ PATTERNS INCLUDED LONG Signals (Bullish): - Three-Line Strike Bearish (84% reversal rate per Bulkowski) - Engulfing Bullish - Morning Star / Morning Doji Star - Belt Hold Bullish - Abandoned Baby Bullish - Rising Window - Three Inside Up - Three Outside Up SHORT Signals (Bearish): - Engulfing Bearish - Three Black Crows - Evening Star / Evening Doji Star - Abandoned Baby Bearish - Two Black Gapping - Falling Window - Belt Hold Bearish - Three Inside Down - Three Outside Down █ FEATURES - Real-time pattern detection with LONG/SHORT direction - Dynamic win rate calculation based on YOUR chart's historical performance - Comparison to Bulkowski's book statistics - Label colors update based on outcome: 🟡 Yellow = Pending (awaiting breakout) 🟢 Green = WIN (correct breakout direction) 🔴 Red = LOSS (wrong breakout direction) ⚪ Gray = Timeout (excluded from statistics) - Separated LONG vs SHORT performance dashboard - Adjustable breakout timeout window █ HOW TO USE 1. When a pattern appears, the label shows direction (LONG/SHORT) and historical win rate 2. Wait for bar close confirmation (✓ CONFIRMED status) 3. Monitor subsequent bars for breakout above pattern high (bullish) or below pattern low (bearish) 4. Use the dashboard to identify which patterns perform best on your specific instrument █ IMPORTANT DISCLAIMER - Past performance does not guarantee future results - The "Book WR" values are from Bulkowski's historical research on US equities and may differ across instruments, timeframes, and market conditions - This indicator is for educational and analytical purposes only - Always use proper risk management and do your own analysis before trading - The win rates displayed are based on the breakout methodology, not actual trade profitability █ SETTINGS - Max Bars to Breakout: How long to wait for pattern confirmation (default: 10) - Pattern Toggles: Enable/disable individual patterns - Bulkowski Parameters: Adjust trend EMA, height threshold, and doji tolerance █ ACCESS This is an invite-only script. For access, please send a direct message.
Индикатор Pine Script®
от I075
Patterns and AlertsPatterns and Alerts — TradingView Indicator Documentation © 2026 Arup Sarkar Indicator Name: Patterns and Alerts Version: 1.0 About Me: Spent 32+ years in the software industry and now a full time trader. I did not find an indicator that keeps the chart clean, addresses candle and chart patters combined and provide alerts. This is my first release and by Feb end, I will include all chart/candle patterns, trend line & most vital, Smart Money intent behind patterns (candle and chart). Description The Indicator: Patterns and Alerts is a comprehensive indicator that detects candlestick and classical chart patterns, provides real-time alerts, and keeps charts clean with minimalist visuals. It helps traders identify actionable price patterns across all timeframes and asset classes. Key Features - Detects Bullish/Bearish Pin Bars - Detects Double Top, Head & Shoulders, Rising Wedges, and Falling Wedges - Generates alerts once per confirmed pattern - Uses thin lines and optional pivot labels for clean visuals - Works on all timeframes (1-minute to Daily) Alerts - Pattern type - Pivot prices (if applicable) - Symbol - Timeframe Pro Tips - For aggressive detection, decrease Pivot Length & Pin Bar Wick Ratio - For conservative detection, increase Pivot Length & Pin Bar Wick Ratio - Disable labels on lower timeframes to reduce clutter - Combine alerts with trend indicators, volume, or higher timeframe analysis for confirmation - Can integrate alerts via webhooks for automated trading Author / Credit Arup Sarkar
Индикатор Pine Script®
от arupnj2018
Alpha Beta Gamma with Volume# Alpha Beta Gamma with Volume ## Description **Alpha Beta Gamma with Volume** is an advanced technical analysis indicator that combines the Alpha-Beta-Gamma (ABG) oscillator with sophisticated volume analysis. This powerful tool helps traders identify market trends, momentum, and volume-based signals simultaneously. ## Key Features ### 📊 Alpha-Beta-Gamma Oscillator - **Alpha**: Measures the distance from the current price to the lowest price over the selected period - **Beta**: Calculates the price range (highest - lowest) over the selected period - **Gamma**: Normalized value showing the price position within the current range (0-1 scale) ### 📈 Advanced Price Configuration - Multiple timeframe analysis - Flexible price source selection (Open, High, Low, Close, or any average) - Customizable ABG calculation length ### 🔍 Smart Volume Analysis - Volume trend identification using moving averages - Three-tier volume classification: - **High Volume**: Volume ≥ 2x MA (Deep Blue Bull / Aqua Bear candles) - **Low Volume**: Volume ≤ 0.5x MA (Light Blue Bull / Light Yellow Bear candles) - **Strong Signal Volume**: Volume ≥ 1.5x MA (Violet Bull / Pink Bear candles) - Bull/Bear candle color coding based on volume strength ### 🎯 Custom Range Levels (0-1 Range Divided into 8 Parts) - 9 horizontal levels from 0 to 1 (each 1/8 apart) - Psychological support/resistance zones - Customizable line styles and labels - Perfect for grid trading, breakout strategies, and level analysis ### 📊 Real-time Data Table - Compact table displaying current ABG values - Percentage change calculations - Trend direction indicators - Customizable position and size ### 🎨 Visual Customization - Adjustable line styles (Solid, Dashed, Dotted) - Customizable label sizes and colors - Flexible transparency settings - Multiple display options for all elements ## Usage Instructions ### Basic Settings: 1. **Strike Price Settings**: Select your preferred timeframe and price type 2. **ABG Parameters**: Adjust length for sensitivity (default: 37) 3. **Volume Analysis**: Configure volume thresholds based on your trading style 4. **Visual Style**: Customize colors, line styles, and labels to your preference ### Trading Signals: - **Gamma Values**: - 0-0.5: Oversold/Buying zone - 0.5-1: Overbought/Selling zone - **Volume Confirmation**: Use volume colors to confirm trend strength - **Custom Levels**: Watch for price reactions at 1/8, 2/8, 4/8, 6/8, and 7/8 levels ### Recommended Configurations: - **Scalping**: Length = 20-30, enable Alpha-Beta logic - **Swing Trading**: Length = 40-50, use custom range levels - **Position Trading**: Length = 50-100, focus on volume signals ## Technical Details - **Version**: Pine Script v6 - **Author**: Nurbolat Zhan - **Interface Language**: Kazakh (fully translated) - **Required Components**: Built-in TradingView functions only ### Volume Thresholds Explained: 1. **High Volume** (≥ 2x MA): Significant institutional activity 2. **Low Volume** (≤ 0.5x MA): Consolidation or indecision periods 3. **Strong Signal** (≥ 1.5x MA): High-probability trade setups ## Important Notes ⚠️ **Disclaimer**: - This is a technical analysis tool, not financial advice - Always use proper risk management - Combine with other indicators for confirmation - Past performance doesn't guarantee future results 📈 **Best Practices**: 1. Use ABG for trend identification 2. Confirm with volume analysis 3. Watch for divergences between price and indicators 4. Use multiple timeframes for better context --- **Motto**: "Precision in analysis, confidence in execution!" *This indicator is specifically designed for traders who want to combine oscillator analysis with volume confirmation in a single, comprehensive tool.*
Индикатор Pine Script®
от nurbolat_jan
REBOTE PRO EMA //@version=5 indicator(title="REBOTE PRO EMA", overlay=true) // === CONFIGURACIÓN === emaRapida = input.int(20, "EMA Rápida") emaLenta = input.int(50, "EMA Lenta (Tendencia)") rsiPeriodo = input.int(14, "RSI Periodo") // === CÁLCULOS === emaFast = ta.ema(close, emaRapida) emaSlow = ta.ema(close, emaLenta) rsiVal = ta.rsi(close, rsiPeriodo) // === CONDICIONES DE TENDENCIA === tendenciaAlcista = emaFast > emaSlow tendenciaBajista = emaFast < emaSlow // === CONDICIONES DE REBOTE === reboteBuy = tendenciaAlcista and low <= emaFast and close > emaFast and rsiVal > 40 reboteSell = tendenciaBajista and high >= emaFast and close < emaFast and rsiVal < 60 // === GRÁFICOS === plot(emaFast, color=color.orange, linewidth=2) plot(emaSlow, color=color.red, linewidth=2) // === SEÑALES === plotshape(reboteBuy, title="BUY", style=shape.triangleup, location=location.belowbar, color=color.lime, size=size.small) plotshape(reboteSell, title="SELL", style=shape.triangledown, location=location.abovebar, color=color.red, size=size.small)
Индикатор Pine Script®
от mailenalopez1697
Gold Traders Shymkent# Gold Traders Shymkent ## Description **Gold Traders Shymkent** is a professional ZigZag indicator designed specifically for traders from Kazakhstan. Based on the classic ZigZag indicator logic from MT4 platform, it identifies key trend points in price movements and displays them visually. ## Key Features ### 🎯 Core Functions: - **ZigZag Analysis**: Identification of significant price highs and lows - **Kazakh Labeling**: ЖЖ (Higher High), ЖТ (Higher Low), ТЖ (Lower High), ТТ (Lower Low) labels in Kazakh language - **Flexible Settings**: Depth, Deviation, and Backstep parameters - **Two Modes**: Repainting and non-repainting modes ### ⚙️ Configuration Parameters: 1. **ZigZag Settings**: - Depth - reversal depth - Deviation - minimum deviation percentage - Backstep - backward step value 2. **Display Parameters**: - Line thickness - Bull/Bear colors - Show/hide labels - Toggle ЖЖ/ЖТ/ТЖ/ТТ markers - Transparency for lines and labels 3. **Operation Modes**: - Repainting mode (real-time updates) - ZigZag line extension option ### 🔔 Alert System: The indicator provides alerts for: - New ЖЖ/ЖТ/ТЖ/ТТ points formation - Direction changes (bull to bear or vice versa) - Trend reversals ### Advantages: - **Easy to Use**: Intuitive interface with Kazakh language settings - **Flexibility**: Adaptable to different market conditions - **Clarity**: Kazakh labeling convenient for local traders - **Versatility**: Works on all timeframes ## Usage Instructions ### Basic Usage: 1. **Trend Identification**: Monitor main trend through ZigZag lines 2. **Support/Resistance Levels**: Use extremum points as support and resistance levels 3. **Reversal Points**: Identify trend change points ### Recommended Settings: - **For volatile markets**: Depth = 12, Deviation = 5 - **For slow markets**: Depth = 20, Deviation = 8 - **To reduce whipsaws**: Backstep = 3 ## Important Notes ⚠️ **Key Considerations**: - The indicator may operate in repainting mode - False signals possible on lower timeframes - Adjust settings according to market conditions - Use with other indicators for major trading decisions ## Technical Details - **Author**: Based on Dev Lucem code, adapted to Kazakh language - **Language**: Pine Script v5 - **Interface Language**: Kazakh - **Required Libraries**: DevLucem/ZigLib/1 --- 📊 **Gold Traders Shymkent** - A professional analysis tool specifically developed for Kazakhstani traders. The indicator combines accuracy with ease of use to assist in market decision making. **Motto**: "Accuracy and reliability - the key to successful trading!"
Индикатор Pine Script®
от nurbolat_jan
Gold Traders Shymkent# Gold Traders Shymkent ## Description **Gold Traders Shymkent** is a professional ZigZag indicator designed specifically for traders from Kazakhstan. Based on the classic ZigZag indicator logic from MT4 platform, it identifies key trend points in price movements and displays them visually. ## Key Features ### 🎯 Core Functions: - **ZigZag Analysis**: Identification of significant price highs and lows - **Kazakh Labeling**: ЖЖ (Higher High), ЖТ (Higher Low), ТЖ (Lower High), ТТ (Lower Low) labels in Kazakh language - **Flexible Settings**: Depth, Deviation, and Backstep parameters - **Two Modes**: Repainting and non-repainting modes ### ⚙️ Configuration Parameters: 1. **ZigZag Settings**: - Depth - reversal depth - Deviation - minimum deviation percentage - Backstep - backward step value 2. **Display Parameters**: - Line thickness - Bull/Bear colors - Show/hide labels - Toggle ЖЖ/ЖТ/ТЖ/ТТ markers - Transparency for lines and labels 3. **Operation Modes**: - Repainting mode (real-time updates) - ZigZag line extension option ### 🔔 Alert System: The indicator provides alerts for: - New ЖЖ/ЖТ/ТЖ/ТТ points formation - Direction changes (bull to bear or vice versa) - Trend reversals ### Advantages: - **Easy to Use**: Intuitive interface with Kazakh language settings - **Flexibility**: Adaptable to different market conditions - **Clarity**: Kazakh labeling convenient for local traders - **Versatility**: Works on all timeframes ## Usage Instructions ### Basic Usage: 1. **Trend Identification**: Monitor main trend through ZigZag lines 2. **Support/Resistance Levels**: Use extremum points as support and resistance levels 3. **Reversal Points**: Identify trend change points ### Recommended Settings: - **For volatile markets**: Depth = 12, Deviation = 5 - **For slow markets**: Depth = 20, Deviation = 8 - **To reduce whipsaws**: Backstep = 3 ## Important Notes ⚠️ **Key Considerations**: - The indicator may operate in repainting mode - False signals possible on lower timeframes - Adjust settings according to market conditions - Use with other indicators for major trading decisions ## Technical Details - **Author**: Based on Dev Lucem code, adapted to Kazakh language - **Language**: Pine Script v5 - **Interface Language**: Kazakh - **Required Libraries**: DevLucem/ZigLib/1 ---
Индикатор Pine Script®
от nurbolat_jan
Pivot Points - Market Structure with percent changeRULES: 1) Inputs that control pivots • leftBars: how many bars to the left of the pivot must be lower (for a high pivot) or higher (for a low pivot). • rightBars: how many bars to the right of the pivot must be lower (for a high pivot) or higher (for a low pivot). These two values define the “strictness” of a swing. 2) Pivot High logic (ta.pivothigh) A pivot high is confirmed at bar t when: • The high at t is the maximum within the window: ○ from t - leftBars through t + rightBars • In practical terms: ○ the prior leftBars bars have highs below that high ○ the next rightBars bars have highs below that high In code: • ph = ta.pivothigh(high, leftBars, rightBars) Behavior: • ph returns the pivot high price, but only after rightBars future bars have printed. • Until then it returns na. Where it is plotted: • When ph is confirmed on the current bar, the actual pivot occurred rightBars bars ago, so we place the label at: ○ pivotBar = bar_index - rightBars ○ price = ph 3) Pivot Low logic (ta.pivotlow) A pivot low is confirmed at bar t when: • The low at t is the minimum within the window: ○ from t - leftBars through t + rightBars • In practical terms: ○ the prior leftBars bars have lows above that low ○ the next rightBars bars have lows above that low In code: • pl = ta.pivotlow(low, leftBars, rightBars) Same confirmation behavior: • pl only becomes non-na after rightBars bars have passed. • The label is plotted at bar_index - rightBars. 4) Confirmation delay (important) Because pivots need “future” bars to confirm, every pivot is lagged by rightBars bars. This is expected and correct: it prevents repainting of the pivot point once confirmed. 5) The alternation rule (your added constraint) On top of the raw pivot detection above, the script enforces: • You cannot accept another pivot high until a pivot low has been accepted. • You cannot accept another pivot low until a pivot high has been accepted. Implementation: • Track lastAccepted = "high" or "low". • Only process pivotHigh when lastAccepted != "high". • Only process pivotLow when lastAccepted != "low". This is what prevents consecutive HHs (or LHs) printing without an intervening HL/LL pivot, and vice versa. REALTIME BARS THAT ARE NOT REPAINTED BUT HAVE A 3 BAR DELAY ON THE CHART TIMEFRAME: The confirmation delay is exactly rightBars bars. • A pivot is only confirmed after rightBars future bars have printed. • So the signal arrives rightBars × your chart timeframe after the actual turning point. Examples: • If rightBars = 3: ○ On a Daily chart: ~3 trading days after the pivot bar. ○ On a 65-minute chart: 3 × 65 = 195 minutes (about 3h 15m) after the pivot bar. ○ On a 10-minute chart: 30 minutes after the pivot bar. Note: the pivot label is plotted back on the pivot bar (bar_index - rightBars), but you only learn it rightBars bars later.
Индикатор Pine Script®
от mikebridge
Liquidity Raid VisualizationUpper and lower wicks can be understood as price sweeping liquidity above and below. At first, I used to draw them manually as lines. Later, I thought: what if I coded it instead—wouldn’t that be more convenient? That’s why this script exists. It’s only meant to help with visualization. It doesn’t mean that every downward sweep is valid or guaranteed to work. Good luck to all traders. 上下影線 可以理解為 像上下 清掃流動性但我一開始適用手繪的方式呈線 後來我突然想說 如果我將他寫出來 會不會更方便 一點 所以才會出現 這個腳本 但他只是幫助你可視化並不代表一定 也不是說向下清掃了就一定有效等 加油各位交易者
Индикатор Pine Script®
от xxu12
HoneG_CCIv23HoneG_CCIv23 This is a signal tool capable of both counter-trend and trend-following trading. Apply it to 1-minute charts. For trend-following, it features a rapid-fire mode. When conditions align, rapid-fire mode activates, and two indicators signaling the rapid-fire timing will turn ON/OFF in sync with price extension moments. 逆張りも順張りも出来るサインツールです。１分足チャートに適用してください。 順張りには連打モードがあり、条件が揃うと連打モードが発動し、連打タイミングを知らせる二か所の表示が、価格が伸びるタイミングに合わせてON/OFFします。
Индикатор Pine Script®
от TVYAMA
ICT Tool-KitICT TOOL-KIT INDICATOR DESCRIPTION This toolkit consolidates essential ICT market structure and price action tools into a single, clean indicator. Built for traders focused on session analysis, order block identification, and HTF confirmation through multiple timeframe perspectives. WHAT IT DOES The indicator tracks macro session ranges across Asia, London and NY trading hours, identifies fair value gaps at session opens, displays higher timeframe candle structure with Fibonacci retracement levels, and marks sweeps across selected timeframes. Non-RTH activity can be highlighted separately if needed. All tools are designed to operate cleanly alongside price action without cluttering the chart. --- SECTION 1: MACRO CYCLES The macro cycle section displays the high and low range for each trading session. These ranges represent where price moved during each region's primary trading window. Max Timeframe (minutes) - Controls which timeframes display the macro ranges - Set to 5 minutes by default, macros won't show on 15m and higher - Useful for filtering out higher timeframe noise when trading intraday - Example: Set to 240 for 4h and below, 1440 for daily and below Show Asia/London/NY Macro - Toggle each session on or off - Asia and London are off by default, NY is on - Use these toggles based on what your strategy focuses on Macro Cycles Timeframe - Leave blank to use your chart's current timeframe - Or lock to a specific timeframe for consistent range calculations Range Area Transparency - Controls how opaque the session boxes are - Lower value = more visible, higher value = more transparent - Default at 85 keeps them subtle in the background Range Outline / Range Label - Toggle the border of the boxes and the session name label on or off UTC Offset - Set your timezone offset from UTC - Or enable "Use Exchange Timezone" to automatically detect --- SECTION 2: FVG GENERAL First Presented Fair Value Gaps are identified at the open of major sessions. These boxes mark where price moved but left a gap in the structure, creating inefficiency that price often returns to fill. The indicator searches for FVGs during the NY Open (9:32-10:30), NY PM (1:32-2:30), and Weekly Open (6:02 PM-8:00 PM) windows. Detection is forced to the 1m timeframe for accuracy regardless of your chart timeframe. Infinite Extension - When enabled, FVG boxes extend infinitely to the right, following live price - When disabled, boxes contract to 3 bars for a cleaner look while price moves past them - Default is off to keep the chart clean Max Total FVG Boxes - Limits how many FVG boxes can exist on screen at once - Default is 3, oldest boxes are deleted when limit is reached FVG Label Size - Controls the text size of the FVG labels - Options: Tiny, Small, Normal, Large NY Open (AM) / NY PM (1:30) / Weekly Open - Each has its own color settings for the box and label text - Adjust colors to match your preference or chart theme --- SECTION 3: HTF CANDLE WITH FIBONACCI RETRACEMENT This section displays candle structure from a higher timeframe on your current chart. Useful for understanding the larger move while trading smaller timeframes. Show Candle - Toggle the HTF candles on or off Timeframe - Select which timeframe the candles represent - Options: 1m, 5m, 15m, 30m, 1h, 2h, 4h, Daily, Weekly, Monthly Candles to Show - How many HTF candles display on screen - Default is 3, can be set up to 20 Bull Body / Bear Body / Bull Border / Bear Border / Wick Color - Customize the appearance of the candles - Standard white for bull, black for bear Width / Offset Padding - Width controls candle thickness - Offset Padding is how far right the candles are positioned from the right edge Show Label / Label Color / Size / Show Timer - The label displays the timeframe at the top of the candle - Timer shows hours and minutes until the candle closes - Toggle either on or off as needed --- FIBONACCI RETRACEMENT The Fibonacci levels display on the most recent HTF candle, showing standard retracement levels (0.0, 0.25, 0.50, 0.75, 1.0). All levels are black by default. Show Fibonacci - Toggle on or off Line Style / Line Width - Customize how the fib lines look - Options: Solid, Dashed, Dotted Extend Fibonacci Right - When enabled, fib lines extend infinitely to the right - Default is off to keep them contained to the candle structure --- NDOG (Next Day Opening Gap) / Gap Rectangle The NDOG displays the gap between the previous candle's close and the current candle's open. This highlights where the gap filled or remained unfilled overnight. Show NDOG - Toggle the gap rectangle on or off - Default is on NDOG Color - Controls the color and opacity of the rectangle - Set to black with 80 transparency by default for clean appearance Extend NDOG Right - NDOG extends infinitely right by default to mark the gap clearly - This distinguishes it from the FVG boxes which follow price action --- SECTION 4: TIMEFRAME SWEEPS Sweeps mark when price breaks the high or low of the previous candle on your selected sweep timeframe. Useful for identifying intrabar reversals and momentum shifts. Sweep Timeframe - Select which timeframe to monitor for breaks - Options: 1m, 5m, 15m, 30m, 1h, 2h, 4h, Daily Dot Symbol - Choose between three dot styles to mark sweeps Sweep High Color / Sweep Low Color - Colors for high sweeps and low sweeps - High sweeps appear below price, low sweeps appear above --- SECTION 5: NON-RTH DISPLAY Non-RTH (Outside Regular Trading Hours) tools highlight activity outside the main market session. Regular Trading Hours - Set the session window that represents RTH for your market - Default is 9:30 AM - 4:15 PM for US equities Show Non-RTH Background - Highlights the background when trading outside RTH - Off by default Non-RTH Candles - When enabled, candles outside RTH display in white with 30% transparency - This keeps them visible but clearly separated from RTH candles - Off by default, enable if you trade pre-market or after-hours Bull/Bear Transparency - Both set to 30 by default for balanced appearance
Индикатор Pine Script®
от jbzgrs
Consolidation zones + BreakoutThis Pine Script v6 indicator is designed to detect consolidation zones and mark breakout entries (long or short) when price exits those zones. Indicator purpose Identify periods where price moves in a tight range for several consecutive bars (consolidation). Highlight those zones on the chart with a yellow shaded area between the local high and low. Mark potential LONG and SHORT entries when price breaks out of a consolidation zone. Core consolidation logic The indicator measures whether the market is “compressed” by comparing the price range of recent bars with volatility measured via ATR: It computes the highest high and lowest low of the last lookback bars: rangeHigh = ta.highest(high, lookback) rangeLow = ta.lowest(low, lookback) It calculates the current range: rng = rangeHigh - rangeLow It calculates ATR over atrLen bars as a volatility benchmark: atrVal = ta.atr(atrLen) It defines a compressed range (base consolidation) when the range is smaller than a multiple of ATR: baseConso = rng < atrVal * atrMult Here, atrMult controls how tight the range must be. Lower values (0.8–1.0) require strong compression; higher values (1.5–2.0) are more permissive. Minimum bars in consolidation To avoid calling a very short pause a consolidation, the script enforces a minimum duration: It uses ta.barssince(not baseConso) to count how many bars have passed since the last time the consolidation condition was false. If that count is greater than or equal to minBars, the market is considered to be in consolidation: text isConsolidating = ta.barssince(not baseConso) >= minBars This prevents 2–3 sideways bars from being treated as a full consolidation zone. The minBars input lets you adapt the duration to your timeframe and trading style. Plotting the consolidation zone When isConsolidating is true, the script shades the consolidation area: It plots two invisible series for the zone’s high and low: text pHigh = plot(rangeHigh, display = display.none) pLow = plot(rangeLow, display = display.none) It creates a yellow semi‑transparent fill between those lines only while in consolidation: text fillColor = isConsolidating ? color.new(#ffeb3b, 80) : color.new(#ffeb3b, 100) fill(pHigh, pLow, color = fillColor, title = "Consolidation Zone") Outside consolidation, the color becomes almost fully transparent so the shaded zone disappears. This keeps the chart clean and focuses attention on the actual ranges. Breakout detection (LONG / SHORT) The script then looks for breakouts when price leaves a consolidation zone: It checks if the previous bar was inside consolidation: wasConso = isConsolidating A bullish breakout (LONG) occurs when: The current bar is no longer in consolidation (not isConsolidating). The previous bar was in consolidation (wasConso). The close breaks above the previous consolidation high (close > rangeHigh ): text breakLong = not isConsolidating and wasConso and close > rangeHigh A bearish breakout (SHORT) occurs when: The current bar is no longer in consolidation. The previous bar was in consolidation. The close breaks below the previous consolidation low (close < rangeLow ): text breakShort = not isConsolidating and wasConso and close < rangeLow On each breakout, a label is drawn at the breakout bar: text if breakLong label.new(bar_index, low, "LONG", style = label.style_label_up, textcolor = color.white, color = color.new(color.teal, 0), size = size.tiny) if breakShort label.new(bar_index, high, "SHORT", style = label.style_label_down, textcolor = color.white, color = color.new(color.red, 0), size = size.tiny) These labels highlight where price transitions from sideways action to a potential directional move. User inputs and tuning lookback (Bars for range) Number of bars used to compute the consolidation high/low. Higher values produce wider, less frequent zones; lower values detect shorter consolidations. minBars (Minimum bars in consolidation) Minimum number of consecutive bars that must meet the compression condition. On 15‑minute charts, values between 6 and 12 often work, but this depends on the asset. atrLen and atrMult Control how strict the compression rule is. atrLen: ATR period. atrMult: maximum allowed range as a multiple of ATR. Increasing atrMult finds more zones; decreasing it makes the filter stricter. showText Optional helper label with a short description, useful when sharing the script with other users on the TradingView community. Practical usage Apply the indicator to your preferred timeframe (for example, 15‑minute crypto charts). Tweak lookback, minBars, and atrMult until the yellow zones match the consolidations you would mark manually. Use the LONG and SHORT labels as areas of interest for studying range breakouts and building your own entry/exit rules, always combining them with risk management and a complete trading strategy. This way, the script turns a visual concept—sideways consolidation followed by breakout—into a systematic, testable signal in Pine Script v6.
Индикатор Pine Script®
от Apicode
Sequential 9(Setup Count)- KoRCThis indicator is a simplified Sequential 9-count (Setup 9) tool inspired by widely known “sequential counting” concepts. It detects potential exhaustion points by counting consecutive closes relative to the close 4 bars earlier: Buy Setup (DIP): close < close for 9 consecutive bars (optional strict mode: <=) Sell Setup (TOP): close > close for 9 consecutive bars (optional strict mode: >=) Enhancements / Filters (optional): Trend filter (default ON): uses EMA(200) as a macro trend filter and EMA(20) as a fast context filter. Volatility filter (optional): ignores signals in low-volatility regimes using ATR% threshold. Dedupe (default ON): prevents repeated signals within a short window (one-shot per swing concept). Perfected highlight: Signals are visually emphasized when a simple “perfected” condition is met (bar 8 or 9 extends beyond recent reference highs/lows), displayed with brighter colors. How to use: Use DIP/TOP labels as potential exhaustion alerts, not standalone trade signals. Combine with your own risk management and confirmation tools. Disclaimer: Not affiliated with or endorsed by any third-party. This script is provided for educational/visualization purposes only and does not constitute financial advice.
Индикатор Pine Script®
от KoRC_Trading
Sequential 9(Setup Count)- KoRCThis indicator is a simplified Sequential 9-count (Setup 9) tool inspired by widely known “sequential counting” concepts. It detects potential exhaustion points by counting consecutive closes relative to the close 4 bars earlier: Buy Setup (DIP): close < close for 9 consecutive bars (optional strict mode: <=) Sell Setup (TOP): close > close for 9 consecutive bars (optional strict mode: >=) Enhancements / Filters (optional): Trend filter (default ON): uses EMA(200) as a macro trend filter and EMA(20) as a fast context filter. Volatility filter (optional): ignores signals in low-volatility regimes using ATR% threshold. Dedupe (default ON): prevents repeated signals within a short window (one-shot per swing concept). Perfected highlight: Signals are visually emphasized when a simple “perfected” condition is met (bar 8 or 9 extends beyond recent reference highs/lows), displayed with brighter colors. How to use: Use DIP/TOP labels as potential exhaustion alerts, not standalone trade signals. Combine with your own risk management and confirmation tools. Disclaimer: Not affiliated with or endorsed by any third-party. This script is provided for educational/visualization purposes only and does not constitute financial advice.
Индикатор Pine Script®
от KoRC_Trading
[CodaPro] Multi-Timeframe RSI Dashboard v1.1 v1.1 Update - Fixed Panel Positioning After initial release, I realized the indicator was displaying overlayed on the price chart instead of in its own panel. This has been corrected! Changes: - Fixed: Indicator now displays in separate subpanel below price chart (much cleaner!) - Improved: 5min and 1H RSI lines are now bold and prominent for easier reading - Improved: 15min, 4H, and Daily lines are subtle/transparent for context - Updated: Default levels changed to 40/60 (tighter, high-conviction signals) - Updated: All 5 timeframes now active by default (toggle any off in settings) Thanks for the patience on this quick fix! The indicator should now display properly in its own panel below your price chart. If you were using v1.0, please remove it from your chart and re-add the updated version. Happy trading! Multi-Timeframe RSI Dashboard This indicator displays RSI (Relative Strength Index) values from five different timeframes simultaneously in a clean dashboard format, helping traders identify momentum alignment across multiple time periods. ═══════════════════════════════════════ FEATURES ✓ Displays RSI for 5 customizable timeframes ✓ Color-coded status indicators (Oversold/Neutral/Overbought) ✓ Clean table display positioned in chart corner ✓ Fully customizable RSI length and threshold levels ✓ Works on any instrument and timeframe ✓ Real-time updates as price moves ✓ Smart BUY/SELL signals with cooldown system ✓ Non-repainting - signals never disappear after appearing ═══════════════════════════════════════ HOW IT WORKS The indicator calculates the standard RSI formula for each selected timeframe and displays the results in both a graph and organized table. Default timeframes are: - 5-minute - 15-minute - 1-hour - 4-hour (optional - hidden by default) - Daily (optional - hidden by default) Visual Display: - Graph shows all RSI lines in subtle, transparent colors - Lines don't overpower your price chart - Dashboard table shows exact values and status Color Coding: - GREEN = RSI below 32 (traditionally considered oversold) - YELLOW = RSI between 32-64 (neutral zone) - RED = RSI above 64 (traditionally considered overbought) All timeframes and thresholds are fully adjustable in the indicator settings. ═══════════════════════════════════════ SIGNAL LOGIC BUY Signal: - Triggers when ALL 3 primary timeframes drop below the buy level (default: 32) - Arrow appears near the RSI lines for easy identification - 120-minute cooldown prevents signal spam SELL Signal: - Triggers when ALL 3 primary timeframes rise above the sell level (default: 64) - Arrow appears near the RSI lines for easy identification - 120-minute cooldown prevents signal spam The cooldown system ensures you only see HIGH-CONVICTION signals, not every minor fluctuation. ═══════════════════════════════════════ SCREENSHOT FEATURES VISIBLE - Multi-timeframe RSI lines (5min, 15min, 1H) in subtle colors - Smart BUY/SELL signals with cooldown system - Real-time dashboard showing current RSI values - Clean, professional design that doesn't clutter your chart ═══════════════════════════════════════ DEFAULT SETTINGS - Buy Signal Level: 32 (all 3 timeframes must cross below) - Sell Signal Level: 64 (all 3 timeframes must cross above) - Signal Cooldown: 24 bars (120 minutes on 5-min chart) - Active Timeframes: 5min, 15min, 1H (4H and Daily can be enabled) - RSI Length: 14 periods (standard) ═══════════════════════════════════════ CUSTOMIZABLE SETTINGS - RSI Length (default: 14) - Oversold Level (default: 32) - Overbought Level (default: 64) - Buy Signal Level (default: 32) - Sell Signal Level (default: 64) - Signal Cooldown in bars (default: 24) - Five timeframe selections (fully customizable) - Toggle visibility for each timeframe - Toggle dashboard table on/off - Toggle arrows on/off ═══════════════════════════════════════ HOW TO USE 1. Add the indicator to your chart 2. Customize timeframes in settings (optional) 3. Adjust RSI length and threshold levels (optional) 4. Monitor the dashboard for multi-timeframe alignment INTERPRETATION: When multiple timeframes show the same condition (all oversold or all overbought), it can indicate stronger momentum in that direction. For example: - Multiple timeframes showing oversold may suggest a potential bounce - Multiple timeframes showing overbought may suggest potential weakness However, RSI alone should not be used as a standalone signal. Always combine with: - Price action analysis - Support/resistance levels - Trend analysis - Volume confirmation - Other technical indicators ═══════════════════════════════════════ EDUCATIONAL BACKGROUND RSI (Relative Strength Index) was developed by J. Welles Wilder Jr. and introduced in his 1978 book "New Concepts in Technical Trading Systems." It measures the magnitude of recent price changes to evaluate overbought or oversold conditions. The RSI oscillates between 0 and 100, with readings: - Below 30 traditionally considered oversold - Above 70 traditionally considered overbought - Around 50 indicating neutral momentum Multi-timeframe analysis helps traders understand whether momentum conditions are aligned across different time horizons, potentially providing more robust signals than single-timeframe analysis alone. ═══════════════════════════════════════ NON-REPAINTING GUARANTEE This indicator uses confirmed bar data to prevent repainting: - All RSI values are calculated from previous bar's close - Signals only fire when the bar closes (not mid-bar) - What you see in backtest = what you get in live trading - No signals will disappear after they appear This is critical for reliable trading signals and accurate backtesting. ═══════════════════════════════════════ VISUAL DESIGN PHILOSOPHY The indicator is designed with a "less is more" approach: - Transparent RSI lines (60% opacity) keep price candles as the focal point - Thin lines reduce visual clutter - Arrows positioned near RSI levels (not floating randomly) - Background flashes provide extra visual confirmation - Dashboard table is compact and non-intrusive The goal is to provide powerful multi-timeframe analysis without overwhelming your chart. ═══════════════════════════════════════ TECHNICAL NOTES - Uses standard request.security() calls for multi-timeframe data - Non-repainting implementation with proper lookahead handling - Minimal performance impact - Compatible with all instruments and timeframes - Written in Pine Script v6 ═══════════════════════════════════════ IMPORTANT DISCLAIMERS - This is an educational tool for technical analysis - Past RSI patterns do not guarantee future results - No indicator is 100% accurate - Always use proper risk management - Consider multiple factors before making trading decisions - This indicator does not provide buy/sell recommendations - Consult with a qualified financial advisor before trading ═══════════════════════════════════════ LEARNING RESOURCES For traders new to RSI, consider studying: - J. Welles Wilder's original RSI methodology - RSI divergence patterns - RSI in trending vs ranging markets - Multi-timeframe analysis techniques ═══════════════════════════════════════ Disclaimer This tool was created using the CodaPro Pine Script architecture engine — designed to produce robust trading overlays, educational visuals, and automation-ready alerts. It is provided strictly for educational purposes and does not constitute financial advice. Always backtest and demo before applying to real capital.
Индикатор Pine Script®
от ArisCodes
1