Регистрация

Схождение/расхождение скользящих средних (MACD)

Dual-Scale MACDDual-Scale MACD is a dual-timeframe momentum indicator that displays a scaled short-term MACD together with a long-term MACD in the same pane. The short-term MACD can be amplified by a configurable scale ratio, allowing its momentum structure to be visually aligned with the long-term MACD. All EMA parameters are fully configurable, making this indicator suitable for experimentation with multi-cycle momentum resonance. Features Two independent MACD systems (short-term + long-term) Fully configurable EMA parameters Adjustable scale ratio for visual alignment Clean histogram + top-layer signal line Use cases Multi-cycle momentum comparison Trend confirmation & divergence analysis Studying MACD resonance across time scales This indicator is intended for analytical and educational purposes.
Индикатор Pine Script®
от flyingcow8
MACD-V (Volatility Normalized MACD)Award-Winning Momentum Indicator by Alex Spiroglou (CMT Charles Dao Award & NAAIM Founders Award, 2022) The classic MACD has powered trading decisions for decades, but it suffers from five major limitations that undermine consistency: 1- Readings are not comparable over time (absolute price dependency causes massive scale differences across decades) 2- Not comparable across markets or assets (e.g., stocks vs. forex vs. crypto) 3- No universal overbought/oversold levels 4- Excessive whipsaws in low-momentum/range-bound conditions 5- Lagging signals in high-momentum reversals (e.g., missing big chunks of V-shaped recoveries) MACD-V solves all five issues by normalizing momentum against volatility instead of price. Core Formula MACD-V = (EMA(12) - EMA(26)) / ATR(26) × 100 This expresses momentum in units of Average True Range (ATR), creating a volatility-adjusted oscillator that remains mathematically meaningful and comparable: -Analysts can use MACD-V across any timeframe: -Across any asset class (stocks, forex, commodities, bonds, crypto) -Over decades of history Key Features & Benefits Time-stable & cross-market comparable: A +100 reading today has the same meaning as +100 in the past years, regardless of asset or price level. Universal extremes: ±150 captures ~95% of all readings across markets → extreme/stretched momentum. Momentum Lifecycle Roadmap (objective framework): +150 or < -150: Extreme / overstretched (high reversal risk) +50 to +150 or -50 to -150: Strong directional momentum (rallying, retracing, rebounding, reversing) -50 to +50: Neutral / low momentum / ranging (avoid most signals — high whipsaw zone) Range Rules for regime context: In bullish regimes (price > 200 EMA), -50 to -150 becomes the practical oversold zone; readings below -100 are rare and often powerful buy setups. Opposite in bearish regimes. Improved signal quality: Filter whipsaws in neutral zone, anticipate lag in extremes, prioritize high-probability crosses in strong-momentum bands. MACD-V Histogram (MACD-VH): Normalized short-term momentum with extremes at ±40 for fast reversal detection. Backtesting & strategy-friendly: Enables reliable historical analysis, cross-asset relative strength, and systematic rules MACD-V transforms momentum from subjective art into objective, repeatable science — giving you consistent, actionable insights no matter what you're trading. Use it standalone or layer with trend filters (e.g., 200 EMA), volume, or price action for even stronger edges. Developer: Alex Spiroglou Open-source versions inspired by his work — feel free to fork and improve! Happy trading! 🚀
Индикатор Pine Script®
от KivancOzbilgic
11
Mean Reversion [SIMI]This mean reversion indicator identifies extreme price deviations from the mean, providing high-probability reversal signals. Designed for confluence-based trading, it works best when combined with complementary indicators such as VWAP, price action, and volume analysis. 📊 Core Features Signal Types Prime Signals (Bright Green/Red Dots): Extreme reversions usually beyond ±1.5 SD - highest probability setups (you can customise this zone!) Regular Signals (Dark Green/Red Dots): Standard reversions - moderate probability Leader Line (Pink Dotted): Early warning indicator for potential reversals Histogram Weakness: Momentum divergence signals Normalisation Methods: Institutional Hybrid (Z-ATR) (Recommended): Volatility-adjusted Z-score - adapts to changing market conditions Percentile Ranking: Statistical ranking - excellent for ranging markets PPO + ATR Hybrid: Percentage-based with volatility adjustment Efficiency Ratio: Trend-strength weighted ATR: Pure volatility-based None: Raw Z-score ⚙️ Quick Setup Guide 1. Institutional Presets Pre-configured parameter sets optimised for different timeframes: 5M Day Trading (5/21/5): Intraday scalping 1H Options Trading (6/24/5): Options-focused setups 1D Monthly Cycle (5/20/5): Swing trading 2. Signal Filtering Prime Thresholds: Adjust ±1.5 SD to control signal quality (tighter = fewer, higher quality, adjust this zone per asset traded) Dot Filters: Fine-tune entry zones (-0.03/+0.03 default - this ignores noisy signals near Zero line) Volume Filter: Enable to require volume confirmation (1.4x average recommended, but fine tune yourself) 3. Advanced Filters Dynamic SD Thresholds: Auto-adjusts for volatility regimes (tighter in low vol, wider in high vol) Time of Day Filter: Avoids first 30 minutes, last 15 minutes, and lunch hour (11:30-13:00 EST) 💡 Trading Strategy Recommendations Optimal Usage This indicator is not intended as a standalone system. Use it for confluence alongside: VWAP (institutional positioning) Price action (support/resistance) Options flow (institutional direction) Volume analysis (conviction confirmation) Signal Interpretation Prime Signals: Wait for these for highest-probability entries - mean reversion may take hours to days Manual Entries: Don't wait for dots - trade the ±2 SD zones directly using your own confirmation Options Strategy: Prime sell signals at +2 SD make excellent short call setups; prime buy signals at -2 SD for long calls Timeframe Guidance Lower Timeframes (1M-5M): Higher noise - require additional confluence Higher Timeframes (1H-1D): More reliable signals - suitable for options and swing trades Best Results: Multi-timeframe analysis (check 1H and 4H alignment on 5M entries) 🔔 Alert System Master Alert Enable customisable alerts via the Master Alert System: Toggle individual signal types (Prime Buy/Sell, SD Crosses, Leader, Histogram) Receives bespoke messages with ticker, timeframe, and price One alert condition handles all selected signals Individual Alerts Separate alert conditions available for Prime and Regular signals if preferred. 📈 Backtesting Notes Important: Backtest results are date-sensitive and should not be the primary focus. Instead: Dial in settings visually on your chosen asset Aim for signals near actual tops and bottoms Test different normalisation methods for your specific instrument Optimise for signal quality, not backtest ROI Asset Testing: Primarily developed using SPY, QQQ, and IWM as main assets to trade. Other instruments may require parameter adjustment - mess around! Backtest Engine Entry/Exit modes (All Signals, Prime Only, Early Signals) Position sizing (percentage-based) Slippage and fill method (candle close recommended) Date range selection ⚠️ Best Practices Always use confluence - never trade on MR signals alone Start with Institutional Hybrid normalisation - most adaptive to market conditions Focus on Prime signals for quality over quantity Test on your specific asset - optimal settings vary by instrument Longer timeframes = higher reliability - 1H+ for best results Enable Time Filter on intraday charts to avoid volatile periods Use Dynamic SD in highly volatile markets (earnings, FOMC, etc.) 🛠️ Troubleshooting Too many signals: Increase Prime Thresholds or enable Volume Filter Too few signals: Decrease Prime Thresholds or reduce Dot Filters False signals: Enable Time of Day Filter and Dynamic SD Signals don't align with tops/bottoms: Try different normalisation method 📝 Feedback & Development Bug Reports: Please report any issues via TradingView comments or direct message. Strategy Sharing: I'd love to hear how you're using this indicator and what strategies you've developed. Open Source: Feel free to fork and modify this indicator. If you create an improved version, please share it with the community! 🙏 Acknowledgements Developed through AI-assisted collaboration. Special thanks to Lazy Bear for his open source MACD histogram (volume based). Open source forever - use freely, modify, and share. Happy Trading! Remember: Past performance does not guarantee future results. Always manage risk appropriately. Pandas rock \m/
Индикатор Pine Script®
от simipanda
RSI [Hash Capital Research]RSI is a visually enhanced momentum indicator built on the classic Relative Strength Index. This version expands RSI into a more flexible analytical tool through smoothing options, adaptive zone-based coloring, optional signal line overlays, and divergence detection. It is designed as a context-building indicator, not a standalone entry system. What This Indicator Does This script calculates a smoothed RSI using user-defined parameters and then provides multiple optional enhancements: 1. Adaptive RSI Visualization The core RSI is plotted with: Zone-based color changes (neutral, oversold, overbought) Optional glow effects to emphasize extreme conditions User-defined color intensity and midline visibility The goal is to provide clearer visual segmentation of trend strength and momentum behavior. 2. Custom Smoothing & Signal Line Options The indicator allows: Multi-layer smoothing for RSI stability An optional signal line using the trader’s preferred moving-average method (SMA, EMA, SMMA/RMA, WMA, VWMA) This helps operators examine whether momentum is accelerating or stabilizing relative to its mean. 3. Overbought/Oversold Tools User-defined thresholds determine: Highlighted zones Optional markers for extreme reversals (based on RSI + momentum + velocity criteria) Midline (50) cross highlights for trend-bias transitions These features help contextualize where the RSI sits relative to broader momentum regimes. 4. Divergence Detection (Optional) When enabled, the script scans for regular bullish and bearish divergences using pivot-based structure. It compares: Price making lower lows vs RSI making higher lows (bullish) Price making higher highs vs RSI making lower highs (bearish) Detected divergences are plotted on the RSI panel with visual labels. This detection uses pivot lookbacks and range limits defined by the user. 5. Alerts The indicator provides optional alerts for: Extreme reversals Overbought/oversold momentum shifts Midline (50) crossovers Bullish / bearish divergences Alerts are intended for monitoring, not for automated execution. How to Use It This RSI modification is intended to support broader analysis workflows, including: Identifying regime shifts using midline crosses Monitoring momentum structure across trend phases Highlighting oversold or overbought clustering Adding a visual signal line to interpret momentum smoothing Spotting divergence between price and RSI As with all indicators, this tool should be used as one component of a complete analysis framework. What Makes This Version Distinct This script maintains the core behavior of RSI but introduces: A multi-layer smoothing system Adaptive colors calibrated to oversold/neutral/overbought zones Optional glow visualizations A modular signal-line engine with multiple MA types Configurable divergence detection with visual labels Multiple marker placement modes for extreme conditions These features expand RSI’s readability while keeping its underlying logic transparent and consistent with common operator workflows. Important Notes This is an indicator, not a strategy. It does not execute trades or calculate performance metrics. The visual enhancements are designed to improve clarity, not to generate automated “buy” or “sell” systems. Divergence detection is optional because divergence is inherently contextual and may not apply equally across all markets or timeframes.
Индикатор Pine Script®
от Hash_Capital
2
Manus Forex Alpha Pro Indicator (Trend-Momentum Hybrid)ใช้ AI Manus ช่วยผสมผสานให้ ใช้งานง่ายดี น่าจะไม่ต้องอธิบายนะครับ เพราะเป็นพื้นฐานการใช้งาน เพียงแต่มี แดชบอร์ด ช่วยให้อ่านง่ายขึ้น การลงทุนมีความเสี่ยง ไม่มีเครื่องมือใดคาดการณ์ถูกต้อง 100% เรียนรู้ ฝึกฝน มีวินัย ควบคุมความเสี่ยง ด้วยตนเอง Using AI Manus helps integrate it, making it easy to use. I don't think I need to explain this, as it's basic usage. The dashboard simply makes it easier to read. Investing involves risk; no tool is 100% accurate. Learn, practice, be disciplined, and manage your own risk.
Индикатор Pine Script®
от kkk_mooy_in_FB
MACD Colored CandlesMACD Histogram Candle Colors Overview This indicator visualizes MACD momentum directly on your candlesticks by coloring them according to the MACD histogram's state. Instead of looking at a separate MACD panel, you can instantly see momentum changes right on your price chart. How It Works The indicator calculates the standard MACD (Moving Average Convergence Divergence) and applies the histogram's color logic directly to your candles: 🟢 **Teal (#26a69a)** - Bullish momentum increasing (histogram positive and rising) 🟢 **Light Teal (#b2dfdb)** - Bullish momentum weakening (histogram positive but falling) 🔴 **Light Red (#ffcdd2)** - Bearish momentum weakening (histogram negative but rising) 🔴 **Red (#ff5252)** - Bearish momentum increasing (histogram negative and falling) Features - **Pure MACD Logic**: Uses exact MACD histogram color calculations - **Clean Chart**: No additional plots or tables cluttering your view - **Customizable Inputs**: Adjust Fast length (default 12), Slow length (default 26), and Signal length (default 9) - **MA Type Selection**: Choose between EMA or SMA for both oscillator and signal calculations - **Overlay Display**: Works seamlessly with other indicators Settings - **Source**: Price source for MACD calculation (default: close) - **Fast Length**: Period for fast moving average (default: 12) - **Slow Length**: Period for slow moving average (default: 26) - **Signal Length**: Period for signal line (default: 9) - **Oscillator MA Type**: EMA or SMA - **Signal MA Type**: EMA or SMA Best Use Cases - Quick momentum identification without switching between panels - Combining with support/resistance levels for trade entries - Identifying divergences between price action and momentum - Multi-timeframe analysis with color-coded momentum Tips - Use in combination with traditional MACD for confirmation - Color changes often precede significant price movements - Works on all timeframes and instruments - Consider pairing with volume indicators for stronger signals Credits Based on the standard MACD indicator with histogram color visualization applied to candlesticks. --- *This is an open-source script. Feel free to use, modify, and share!*
Индикатор Pine Script®
от theNotecrypto
Intuitive Predictive MACD TargetsThis indicator uses Reverse Engineering math to calculate the exact price the market needs to reach for specific MACD events to happen on the current bar. Standard MACD is a lagging indicator—you usually wait for the candle to close to confirm a signal. This script changes that by drawing "Finish Lines" on your chart, showing you exactly where price must go right now to trigger a Crossover or a Momentum Hook. The "Reverse Engineering" Concept Instead of calculating MACD from Price, we calculate the Required Price from the Target MACD. Q: "At what price will the MACD line cross the Signal line?" A: The script solves this and draws the Green/Red "Crossover" Line. Key Features 1. Three Distinct Targets Crossover Target (PCO/NCO): The exact price needed to trigger a Buy/Sell signal on the current candle. Dynamic Coloring: Turns Green if price needs to go UP to cross, Red if price needs to go DOWN. Settlement Target (The Hook): The exact price where the MACD momentum flattens out (Angle = 0). If price touches this Orange Dashed Line, the trend is likely pausing or preparing to reverse. Zero Cross Target: The price needed for MACD to reclaim the Zero Line. 2. Smart "Staggered" Labels (No Overlap) Unlike other scripts where text piles up and becomes unreadable, this indicator automatically spreads labels horizontally. Crossover info stays near the price. Settlement info is shifted to the right. Zero info is shifted further right. Result: You can read all three targets clearly, even if the prices are almost identical. 3. Full Customization Line Length: Choose "Infinite" to see targets as Support/Resistance levels across the screen, or "Short" to keep your chart background clean. Text Visibility: Option to force text to White or Black for high contrast on Dark/Light themes. Styles: Fully adjustable colors, line widths, and styles (Solid, Dashed, Dotted) for each target type. How to Use The "Finish Line" Strategy: If you are Long, and the Red NCO Line appears just below the current price, be cautious. It means a very small drop will confirm a Bearish Cross. Momentum Checks: Watch the Orange "Settlement" Line. If price is moving away from the Orange line, the trend is accelerating (Safe to hold). If price touches the Orange line, momentum has died (Consider taking profit). Settings Visual Settings: Change Line Length (Infinite/Short) and Text Color. MACD Settings: Standard inputs (Default 12, 26, 9). Toggles: Option to show/hide the Zero Line target.
Индикатор Pine Script®
от PratikKharat1990
BTC Scalping 3m | Supertrend + MACD Squeeze (NY) [v6 FINAL]BTC 3-Minute Scalping Strategy Supertrend Bias + MACD Squeeze (New York Session) This is a fully mechanical BTC scalping strategy designed to capture short momentum bursts that occur when volatility expands in the direction of the higher-timeframe trend. The strategy combines trend confirmation, volatility compression/expansion, and strict session filtering to reduce noise and improve consistency. How It Works Trend Bias Uses a 15-minute Supertrend to define market direction. Trades are taken only in the direction of the higher-timeframe trend. Counter-trend signals are ignored. Timing & Entry Executes on the 3-minute chart. Waits for volatility compression using a LazyBear-style MACD Squeeze. Enters only when the squeeze releases and momentum turns positive. Entry occurs on candle close above the execution-timeframe Supertrend. Session Filter Trades only during the New York session (13:00–21:00 UTC). This avoids low-liquidity periods and reduces false breakouts. Risk & Exits Dynamic stop-loss placed at the execution-timeframe Supertrend. Risk is calculated using the actual filled entry price for accurate R-based exits. Primary profit target is 0.5R, optimized for scalping. Positions are exited immediately if: Price closes against Supertrend Supertrend flips direction Momentum (MACD histogram) turns negative Trades are typically short-lived (1–3 candles), keeping exposure minimal. Key Characteristics Non-repainting logic Fully rule-based (no discretion) High win-rate, low-RR scalping profile Designed for BTC futures/perpetuals Optimized for New York session volatility Usage Notes Run on BTC 3-minute charts Best results during active NY hours Performance will vary by exchange, fees, and slippage This strategy is intended for education and testing, not financial advice Summary This strategy focuses on trading volatility expansion aligned with trend, using Supertrend for structure and MACD Squeeze for timing. By restricting trades to high-liquidity hours and enforcing strict exits, it aims for consistent, repeatable scalps rather than large directional bets.
Стратегия Pine Script®
от blood_doc
Digital MACD Divergences MTF [LUPEN]Digital MACD Divergences MTF V1.0 Overview: Digital MACD Divergences MTF is an advanced momentum oscillator based on digital signal processing techniques. Instead of relying on traditional moving-average smoothing, it applies Finite Impulse Response (FIR) digital filters to extract momentum more cleanly, reducing lag and short-term market noise. The indicator is designed to provide a clear visualization of momentum structure, divergence behavior, and multi-timeframe context, rather than discrete trading signals. Conceptual Architecture At its core, the indicator reinterprets the classic MACD framework through digital convolution logic: FIR filters are used to compute momentum in a more responsive and stable manner than standard EMA-based MACD. The resulting histogram represents momentum intensity and direction as a continuous state rather than binary conditions. A digitally smoothed signal line provides structural reference without introducing excessive delay. This approach emphasizes momentum quality and structure, not signal frequency. Divergence Detection Logic: The script includes automatic divergence detection based on pivot analysis: Regular bullish and bearish divergences are identified using confirmed pivot points. Divergences are visualized with explicit line structures and optional filled areas, highlighting the zone of disagreement between price behavior and momentum. The visualization is designed to remain readable without obscuring price action. Divergences are presented as contextual information, not as mandatory actions. Multi-Timeframe (MTF) Context Digital MACD Divergences MTF supports native multi-timeframe analysis through a dual-pane workflow: A lower-timeframe instance visualizes local momentum dynamics. A higher-timeframe instance visualizes the broader momentum regime within which lower-timeframe fluctuations occur. The higher-timeframe view is not intended as confirmation or filtering logic, but as a contextual background layer that helps interpret short-term momentum behavior inside a larger structural environment. This separation avoids decision compression and keeps each timeframe’s role conceptually distinct. Visual Design Gradient-based histogram fills represent momentum intensity in a continuous manner. Positive and negative momentum regions are clearly differentiated while remaining adaptable to both dark and light chart themes. All visual elements are designed to emphasize state and regime, not discrete events. Reliability No repainting: all divergences and momentum states are confirmed on candle close and remain fixed. Designed for consistency across instruments and timeframes. Customization Options Timeframe selection for MTF mode (leave empty to use the chart’s timeframe). Adjustable signal smoothing parameters. Divergence visibility controls, pivot sensitivity, and optional divergence fill. Fully customizable color palette. Usage Notes This indicator is a visual market analysis tool intended to support momentum interpretation and structural context. It does not provide investment advice, trading signals, or automated decision logic, and should be used as part of a broader analytical framework. Final quotes: "Trading is not about prediction, but about understanding momentum structure. Digital MACD removes noise to make that structure visible."
Индикатор Pine Script®
от Horazio
RSI & BB Oversold Scalper with MACD Confirmation [DotGain]RSI & BB Oversold Scalper with MACD Confirmation The RSI & BB Oversold Scalper is a mean reversion / dip-buying indicator designed for traders who want to combine oversold conditions with momentum confirmation . It uses a multi-step logic: first detect an oversold setup, then wait for a MACD confirmation within a defined time window before issuing a buy signal. --- Core Concept 1. Detect an oversold setup using Bollinger Bands %b, RSI and an optional DSS filter 2. Keep the setup active for a limited number of candles 3. Trigger the entry using a MACD bullish crossover 4. Reset after entry to avoid multiple signals from the same setup --- Buy Signal Logic A buy signal is generated when the following conditions are met: 1. Oversold Setup (filters can be enabled/disabled individually) • Bollinger Bands %b Oversold (Lookback-based) The price has traded below the lower Bollinger Band at least once within the last `lookbackBB` candles. • RSI Oversold (Lookback-based) The RSI has dropped below 30 at least once within the last `lookbackRSI` candles. • DSS (Double Smoothed Stochastic) Reversal Filter A bullish crossover of the DSS line above its signal line while the DSS value is below 20 , indicating a potential momentum reversal from oversold conditions. Note: BB %b and RSI are lookback filters , while the DSS condition is a single-bar crossover event . --- 2. MACD Confirmation (Entry Timing) After the setup becomes active, the indicator waits for a bullish MACD crossover (`MACD line crosses above Signal line`) within a user-defined time window (`validWindow` candles). If the MACD confirmation occurs within this window, a buy signal is printed. If the window expires without confirmation, the setup is discarded automatically. --- Reset Logic • After a buy signal, the setup is reset immediately • Only one signal is allowed per setup • No late entries after the time window expires --- Inputs & Customization • Enable or disable BB, RSI and DSS filters individually • Adjust lookback periods to control how recent oversold conditions must be • Tune the MACD confirmation window to balance early vs. conservative entries Smaller windows = faster, more aggressive entries Larger windows = fewer but more confirmed signals Recommended Markets & Timeframes • Cryptocurrencies, Forex, Indices, liquid stocks • Best suited for 1m – 15m scalping • Also usable on 15m – 1h for slower mean-reversion trades Visuals • Buy signals are displayed as labels below the price candles Important Notes • This indicator is a signal and timing tool , not a complete trading system • Always combine with higher-timeframe trend, support/resistance or volume analysis • Backtesting and paper trading are strongly recommended Disclaimer: This "RSI & BB Oversold Scalper with MACD Confirmation" (Oversold Scalper) indicator is provided for informational and educational purposes only. It does not, and should not be construed as, financial, investment, or trading advice. The signal generated by this tool (Green) is the result of a specific set of algorithmic conditions. They are not a direct recommendation to buy or sell any asset. The indicator's purpose is to highlight possible weakness in the markets, not to provide infallible trade signals. All trading and investing in financial markets involves a substantial risk of loss. You can lose all of your invested capital. Past performance is not indicative of future results. Even an indicator designed to filter out "chop" may produce false, lagging, or losing signals. Markets can remain unpredictable longer than you can remain solvent. The creator DotGain assumes no liability for any financial losses or damages you may incur, directly or indirectly, as a result of using this indicator or the information it provides. You are solely responsible for your own trading and investment decisions. Always conduct your own research (DYOR), validate signals with other methods, and consider your personal risk tolerance before entering any trade.
Индикатор Pine Script®
от DotGain
2
JRockets MACDThis is my favorite indicator, that I use as one of my conformations before entering a trade in the 15M timeframe This MACD is tailor made by me to work efficient, consistent, and effectively. I back tested tons of times, it helps if you're entering too early, late and even get faked out. The MACD is by far my favorite and one and only indicator, and here's why. The MACD contains 2 EMA lines where it gives me a signal on when to buy or sell. If the Blue line crosses the red line on the bottom of the indicator its giving buy signals as long as the blue line stays on top, and when the red line crosses the blue line on top of the indicator its giving sell signals as long as the redline stay on top. Be sure to pay attention to the candle stick patterns as well and has to be around key levels. What makes this a better signal as well, the MACD has a built-in momentum hologram, some see it as overbought/undersold, or volume indicator. By combining the momentum hologram with your buy/sell ema will prevent you from entering a trade in the wrong area. The momentum hologram is almost self-explanatory, when there is buying pressure, the hologram turns blue, the darker the blue the stronger the momentum as well as the length of the hologram, once is start losing momentum it starts to turn to a lighter blue. Eventually a light red to a solid red showing momentum for a strong sell, this works vice versa. Combing all that at once and built instincts it becomes very effective. You can also use the EMA signals as divergence, but I don't really trade with divergence but could possibly give you conformation. Using the MACD is like having 3-4 indicators in one with all of them working fluent together. I have the MACD locked on the 15M timeframe because that's where it works more accurately. You can make the EMA lines a bit thicker to be easier to see. I would change the MACD visible for the 15M timeframe only or 1M to 1H timeframe. I hope this indicator helps you, as it did for me. You can simply click add on your charts on the top left to get this free indicator. Peace out and enjoy! Be sure to share, this indicator with your friends as it may help someone out.
Индикатор Pine Script®
от JRockets
15
RSI + MACD (RSI Divergence) V3.2 RSI + MACD (RSI Divergence) This indicator combines RSI divergence detection with a scaled MACD overlay to help traders visualize momentum structure and divergence more clearly in a single pane. Instead of using RSI and MACD as isolated signals, this script focuses on relative movement, swing structure, and divergence logic, making it especially useful for discretionary traders who analyze momentum behavior rather than fixed indicator levels. ________________________________________ Key Features RSI Divergence Engine • Detects Regular Bullish / Bearish Divergence • Optional Hidden Divergence (for trend continuation) • Uses confirmed pivot logic (left/right lookback) to avoid repainting • Adjustable divergence range to filter weak or overly distant signals RSI is shifted by -50 to center it around zero, allowing better visual alignment with MACD without affecting divergence logic. ________________________________________ Scaled MACD Overlay (Visual Momentum Only) • MACD, Signal, and Histogram are rescaled dynamically to match the RSI oscillator range • Designed for wave structure, phase comparison, and momentum timing • Not intended as a traditional MACD signal generator • Helps identify momentum agreement or disagreement with RSI divergence ________________________________________ Clean & Practical Design • Single pane display (no chart clutter) • Color warnings for RSI overbought / oversold zones • Adjustable scaling lookback for different markets and timeframes • Optimized for smooth performance and non-repainting behavior ________________________________________ How to Use • Best used on indices, crypto, and liquid forex pairs • Combine RSI divergence signals with: o Market structure o Support / resistance o Trend context • Use the MACD overlay to: o Confirm momentum shifts o Spot early loss of strength o Compare oscillator phase alignment This indicator is best suited for analysis and confirmation, not mechanical entry signals. ________________________________________ Notes • MACD values are scaled for visualization only and do not represent real MACD values • Divergence signals are confirmation-based, not predictive • No repainting once pivots are confirmed ________________________________________ Who Is This For? • Swing traders • Momentum & divergence traders • Traders who prefer structure-based confirmation over raw indicator signals • Anyone who wants RSI & MACD behavior in a single, readable oscillator Enjoy and happy trading! DISCLAIMER This script is intended for informational and educational purposes only. It does not constitute financial, investment, or trading advice. All trading decisions made based on its output are solely the responsibility of the user
Индикатор Pine Script®
от MKhoa
RSI & MACD SuiteRSI & MACD Suite A professional combination of two essential momentum indicators - Relative Strength Index (RSI) and Moving Average Convergence Divergence (MACD) - designed to provide comprehensive market analysis in a single, clean interface. OVERVIEW This indicator combines the power of RSI and MACD to help traders identify potential overbought/oversold conditions, momentum shifts, and trend changes. Both indicators are displayed with enhanced visual elements including gradient fills, customizable bands, and clear signal lines. FEATURES RSI (Relative Strength Index) - Customizable Period: Adjustable RSI length (default: 14) - Visual Zones: Overbought zone (above 70) with green gradient, Oversold zone (below 30) with red gradient, Background fill between bands for easy reference - Key Levels: Clear horizontal lines at 30, 50, and 70 - Flexible Source: Choose any price source (close, open, high, low, etc.) MACD (Moving Average Convergence Divergence) - Customizable Parameters: Fast Length (default: 12), Slow Length (default: 26), Signal Length (default: 9) - MA Type Selection: Choose between EMA or SMA for both oscillator and signal line - Color-Coded Histogram: Green for bullish momentum, Red for bearish momentum - Clear Signal Lines: Blue MACD line and orange Signal line for easy identification ALERT CONDITIONS The indicator includes 7 built-in alert conditions: RSI Alerts: 1. RSI Overbought - Triggers when RSI crosses above 70 2. RSI Oversold - Triggers when RSI crosses below 30 3. RSI Midline Cross - Triggers when RSI crosses the 50 level MACD Alerts: 4. MACD Bullish Cross - Triggers when MACD line crosses above Signal line 5. MACD Bearish Cross - Triggers when MACD line crosses below Signal line 6. MACD Histogram Bullish - Triggers when histogram crosses above zero 7. MACD Histogram Bearish - Triggers when histogram crosses below zero CUSTOMIZATION Clean Organization - Inputs Tab: Separate groups for RSI and MACD settings - Style Tab: All visual elements clearly labeled with "RSI -" or "MACD -" prefixes for easy identification - Full Control: Customize colors, line widths, and visibility of all elements Visual Clarity - Professional color scheme optimized for both light and dark themes - Gradient fills for intuitive zone identification - Clear separation between RSI and MACD elements SETTINGS RSI Settings - Length: Lookback period for RSI calculation (default: 14) - Source: Price data to use for calculation (default: close) MACD Settings - Source: Price data to use for calculation (default: close) - Fast Length: Period for fast moving average (default: 12) - Slow Length: Period for slow moving average (default: 26) - Signal Length: Period for signal line (default: 9) - Oscillator MA Type: EMA or SMA for MACD calculation - Signal MA Type: EMA or SMA for signal line TECHNICAL DETAILS - Pine Script Version: v6 - Indicator Type: Oscillator (subplot) - Calculation Method: RSI uses Relative Strength Index with RMA smoothing, MACD uses Fast MA minus Slow MA with configurable MA types - Input Validation: Built-in checks to ensure valid parameter combinations NOTES - Default settings are industry-standard values (RSI: 14, MACD: 12/26/9) - All visual elements can be hidden/shown individually in the Style tab - Alerts must be manually created by users through TradingView's alert system - This indicator does not repaint - all signals are based on closed candles WHO SHOULD USE THIS - Day traders looking for momentum signals - Swing traders identifying trend changes - Technical analysts performing multi-indicator analysis - Traders who want a clean, all-in-one momentum solution DISCLAIMER This indicator is for educational and informational purposes only. It does not constitute financial advice. Always perform your own analysis and risk assessment before making trading decisions. Version: 1.0 Author: aaboomar License: Mozilla Public License 2.0
Индикатор Pine Script®
от aaboomar
Ultimate MACD [captainua]Ultimate MACD - Comprehensive MACD Trading System Overview This indicator combines traditional MACD calculations with advanced features including divergence detection, volume analysis, histogram analysis tools, regression forecasting, strong top/bottom detection, and multi-timeframe confirmation to provide a comprehensive MACD-based trading system. The script calculates MACD using configurable moving average types (EMA, SMA, RMA, WMA) and applies various smoothing methods to reduce noise while maintaining responsiveness. The combination of these features creates a multi-layered confirmation system that reduces false signals by requiring alignment across multiple indicators and timeframes. Core Calculations MACD Calculation: The script calculates MACD using the standard formula: MACD Line = Fast MA - Slow MA, Signal Line = Moving Average of MACD Line, Histogram = MACD Line - Signal Line. The default parameters are Fast=12, Slow=26, Signal=9, matching the traditional MACD settings. The script supports four moving average types: - EMA (Exponential Moving Average): Standard and most responsive, default choice - SMA (Simple Moving Average): Equal weight to all periods - RMA (Wilder's Moving Average): Smoother, less responsive - WMA (Weighted Moving Average): Recent prices weighted more heavily The price source can be configured as Close (standard), Open, High, Low, HL2, HLC3, or OHLC4. Alternative sources provide different sensitivity characteristics for various trading strategies. Configuration Presets: The script includes trading style presets that automatically configure MACD parameters: - Scalping: Fast/Responsive settings (8,18,6 with minimal smoothing) - Day Trading: Balanced settings (10,22,7 with minimal smoothing) - Swing Trading: Standard settings (12,26,9 with moderate smoothing) - Position Trading: Smooth/Conservative settings (15,35,12 with higher smoothing) - Custom: Full manual control over all parameters Histogram Smoothing: The histogram can be smoothed using EMA to reduce noise and filter minor fluctuations. Smoothing length of 1 = raw histogram (no smoothing), higher values (3-5) = smoother histogram. Increased smoothing reduces noise but may delay signals slightly. Percentage Mode: MACD values can be converted to percentage of price (MACD/Close*100) for cross-instrument comparison. This is useful when comparing MACD signals across instruments with different price levels (e.g., BTC vs ETH). The percentage mode normalizes MACD values, making them comparable regardless of instrument price. MACD Scale Factor: A scale factor multiplier (default 1.0) allows adjusting MACD display size for better visibility. Use 0.3-0.5 if MACD appears too compressed, or 2.0-3.0 if too small. Dynamic Overbought/Oversold Levels: Overbought and oversold levels are calculated dynamically based on MACD's mean and standard deviation over a lookback period. The formula: OB = MACD Mean + (StdDev × OB Multiplier), OS = MACD Mean - (StdDev × OS Multiplier). This adapts to current market conditions, widening in volatile markets and narrowing in calm markets. The lookback period (default 20) controls how quickly the levels adapt: longer periods (30-50) = more stable levels, shorter (10-15) = more responsive. OB/OS Background Coloring: Optional background coloring can highlight the entire panel when MACD enters overbought or oversold territory, providing prominent visual indication of extreme conditions. The background colors are drawn on top of the main background to ensure visibility. Divergence Detection Regular Divergence: The script uses the MACD line (not histogram) for divergence detection, which provides more reliable signals. Bullish divergence: Price makes a lower low while MACD line makes a higher low. Bearish divergence: Price makes a higher high while MACD line makes a lower high. Divergences often precede reversals and are powerful reversal signals. Pivot-Based Divergence: The divergence detection uses actual pivot points (pivotlow/pivothigh) instead of simple lowest/highest comparisons. This provides more accurate divergence detection by identifying significant pivot lows/highs in both price and MACD line. The pivot-based method compares two recent pivot points: for bullish divergence, price makes a lower low while MACD makes a higher low at the pivot points. This method reduces false divergences by requiring actual pivot points rather than just any low/high within a period. The pivot lookback parameters (left and right) control how many bars on each side of a pivot are required for confirmation. Higher values = more conservative pivot detection. Hidden Divergence: Continuation patterns that signal trend continuation rather than reversal. Bullish hidden divergence: Price makes a higher low but MACD makes a lower low. Bearish hidden divergence: Price makes a lower high but MACD makes a higher high. These patterns indicate the trend is likely to continue in the current direction. Zero-Line Filter: The "Don't Touch Zero Line" option ensures divergences occur in proper context: for bullish divergence, MACD must stay below zero; for bearish divergence, MACD must stay above zero. This filters out divergences that occur in neutral zones. Range Filtering: Minimum and maximum lookback ranges control the time window between pivots to consider for divergence. This helps filter out divergences that are too close together (noise) or too far apart (less relevant). Volume Confirmation System Volume threshold filtering requires current volume to exceed the volume SMA multiplied by the threshold factor. The formula: Volume Confirmed = Volume > (Volume SMA × Threshold). If the threshold is set to 1.0 or lower, volume confirmation is effectively disabled (always returns true). This allows you to use the indicator without volume filtering if desired. Volume confirmation significantly increases divergence and signal reliability. Volume Climax and Dry-Up Detection: The script can mark bars with extremely high volume (volume climax) or extremely low volume (volume dry-up). Volume climax indicates potential reversal points or strong momentum continuation. Volume dry-up indicates low participation and may produce unreliable signals. These markers use standard deviation multipliers to identify extreme volume conditions. Zero-Line Cross Detection MACD zero-line crosses indicate momentum shifts: above zero = bullish momentum, below zero = bearish momentum. The script includes alert conditions for zero-line crosses with cooldown protection to prevent alert spam. Zero-line crosses can provide early warning signals before MACD crosses the signal line. Histogram Analysis Tools Histogram Moving Average: A moving average applied to the histogram itself helps identify histogram trend direction and acts as a signal line for histogram movements. Supports EMA, SMA, RMA, and WMA types. Useful for identifying when histogram momentum is strengthening or weakening. Histogram Bollinger Bands: Bollinger Bands are applied to the MACD histogram instead of price. The calculation: Basis = SMA(Histogram, Period), StdDev = stdev(Histogram, Period), Upper = Basis + (StdDev × Deviation Multiplier), Lower = Basis - (StdDev × Deviation Multiplier). This creates dynamic zones around the histogram that adapt to histogram volatility. When the histogram touches or exceeds the bands, it indicates extreme conditions relative to recent histogram behavior. Stochastic MACD (StochMACD): Stochastic MACD applies the Stochastic oscillator formula to the MACD histogram instead of price. This normalizes the histogram to a 0-100 scale, making it easier to identify overbought/oversold conditions on the histogram itself. The calculation: %K = ((Histogram - Lowest Histogram) / (Highest Histogram - Lowest Histogram)) × 100. %K is smoothed, and %D is calculated as the moving average of smoothed %K. Standard thresholds are 80 (overbought) and 20 (oversold). Regression Forecasting The script includes advanced regression forecasting that predicts future MACD values using mathematical models. This helps anticipate potential MACD movements and provides forward-looking context for trading decisions. Regression Types: - Linear: Simple trend line (y = mx + b) - fastest, works well for steady trends - Polynomial: Quadratic curve (y = ax² + bx + c) - captures curvature in MACD movement - Exponential Smoothing: Weighted average with more weight on recent values - responsive to recent changes - Moving Average: Uses difference between short and long MA to estimate trend - stable and smooth Forecast Horizon: Number of bars to forecast ahead (default 5, max 50 for linear/MA, max 20 for polynomial due to performance). Longer horizons predict further ahead but may be less accurate. Confidence Bands: Optional upper/lower bands around forecast show prediction uncertainty based on forecast error (standard deviation of prediction vs actual). Wider bands = higher uncertainty. The confidence level multiplier (default 1.5) controls band width. Forecast Display: Forecast appears as dotted lines extending forward from current bar, with optional confidence bands. All forecast values respect percentage mode and scale factor settings. Strong Top/Bottom Signals The script detects strong recovery from extreme MACD levels, generating "sBottom" and "sTop" signals. These identify significant reversal potential when MACD recovers substantially from overbought/oversold extremes. Strong Bottom (sBottom): Triggered when: 1. MACD was at or near its lowest point in the bottom period (default 10 bars) 2. MACD was in or near the oversold zone 3. MACD has recovered by at least the threshold amount (default 0.5) from the lowest point 4. Recovery persists for confirmation bars (default 2 consecutive bars) 5. MACD has moved out of the oversold zone 6. Volume is above average 7. All enabled filters pass 8. Minimum bars have passed since last signal (reset period, default 5 bars) Strong Top (sTop): Triggered when: 1. MACD was at or near its highest point in the top period (default 7 bars) 2. MACD was in or near the overbought zone 3. MACD has declined by at least the threshold amount (default 0.5) from the highest point 4. Decline persists for confirmation bars (default 2 consecutive bars) 5. MACD has moved out of the overbought zone 6. Volume is above average 7. All enabled filters pass 8. Minimum bars have passed since last signal (reset period, default 5 bars) Label Placement: sTop/sBottom labels appear on the historical bar where the actual extreme occurred (not on current bar), showing the exact MACD value at that extreme. Labels respect the unified distance checking system to prevent overlaps with Buy/Sell Strength labels. Signal Strength Calculation The script calculates a composite signal strength score (0-100) based on multiple factors: - MACD distance from signal line (0-50 points): Larger separation indicates stronger signal - Volume confirmation (0-15 points): Volume above average adds points - Secondary timeframe alignment (0-15 points): Higher timeframe agreement adds points - Distance from zero line (0-20 points): Closer to zero can indicate stronger reversal potential Higher scores (70+) indicate stronger, more reliable signals. The signal strength is displayed in the statistics table and can be used as a filter to only accept signals above a threshold. Smart Label Placement System The script includes an advanced label placement system that tracks MACD extremes and places Buy/Sell Strength labels at optimal locations: Label Placement Algorithm: - Labels appear on the current bar at confirmation (not on historical extreme bars), ensuring they're visible when the signal is confirmed - The system tracks pending signals when MACD enters OB/OS zones or crosses the signal line - During tracking, the system continuously searches for the true extreme (lowest MACD for buys, highest MACD for sells) within a configurable historical lookback period - Labels are only finalized when: (1) MACD exits the OB/OS zone, (2) sufficient bars have passed (2x minimum distance), (3) MACD has recovered/declined by a configurable percentage from the extreme (default 15%), and (4) tracking has stopped (no better extreme found) Label Spacing and Overlap Prevention: - Minimum Bars Between Labels: Base distance requirement (default 5 bars) - Label Spacing Multiplier: Scales the base distance (default 1.5x) for better distribution. Higher values = more spacing between labels - Effective distance = Base Distance × Spacing Multiplier (e.g., 5 × 1.5 = 7.5 bars minimum) - Unified distance checking prevents overlaps between all label types (Buy Strength, Sell Strength, sTop, sBottom) Strength-Based Filtering: - Label Strength Minimum (%): Only labels with strength at or above this threshold are displayed (default 75%) - When multiple potential labels are close together, the system automatically compares strengths and keeps only the strongest one - This ensures only the most significant signals are displayed, reducing chart clutter Zero Line Polarity Enforcement: - Enforce Zero Line Polarity (default enabled): Ensures labels follow traditional MACD interpretation - Buy Strength labels only appear when the tracked extreme MACD value was below zero (negative territory) - Sell Strength labels only appear when the tracked extreme MACD value was above zero (positive territory) - This prevents counter-intuitive labels (e.g., Buy labels above zero line) and aligns with standard MACD trading principles Recovery/Decline Confirmation: - Recovery/Decline Confirm (%): Percent move away from the extreme required before finalizing (default 15%) - For Buy labels: MACD must recover by at least this percentage from the tracked bottom - For Sell labels: MACD must decline by at least this percentage from the tracked top - Higher values = more confirmation required, fewer but more reliable labels Historical Lookback: - Historical Lookback for Label Placement: Number of bars to search for true extremes (default 20) - The system searches within this period to find the actual lowest/highest MACD value - Higher values analyze more history but may be slower; lower values are faster but may miss some extremes Cross Quality Score The script calculates a MACD cross quality score (0-100) that rates crossover quality based on: - Cross angle (0-50 points): Steeper crosses = stronger signals - Volume confirmation (0-25 points): Volume above average adds points - Distance from zero line (0-25 points): Crosses near zero line are stronger This score helps identify high-quality crossovers and can be used as a filter to only accept signals meeting minimum quality threshold. Filtering System Histogram Filter: Requires histogram to be above zero for buy signals, below zero for sell signals. Ensures momentum alignment before generating signals. Signal Strength Filter: Requires minimum signal strength score for signals. Higher threshold = only strongest signals pass. This combines multiple confirmation factors into a single filter. Cross Quality Filter: Requires minimum cross quality score for signals. Rates crossover quality based on angle, volume, momentum, and distance from zero. Only signals meeting minimum quality threshold will be generated. All filters use the pattern: filterResult = not filterEnabled OR conditionMet. This means if a filter is disabled, it always passes (returns true). Filters can be combined, and all must pass for a signal to fire. Multi-Timeframe Analysis The script can display MACD from a secondary (higher) timeframe and use it for confirmation. When secondary timeframe confirmation is enabled, signals require the higher timeframe MACD to align (bullish/bearish) with the signal direction. This ensures signals align with the larger trend context, reducing counter-trend trades. Secondary Timeframe MACD: The secondary timeframe MACD uses the same calculation parameters (fast, slow, signal, MA type) as the main MACD but from a higher timeframe. This provides context for the current timeframe's MACD position relative to the larger trend. The secondary MACD lines are displayed on the chart when enabled. Noise Filtering Noise filtering hides small histogram movements below a threshold. This helps focus on significant moves and reduces chart clutter. When enabled, only histogram movements above the threshold are displayed. Typical threshold values are 0.1-0.5 for most instruments, depending on the instrument's price range and volatility. Signal Debounce Signal debounce prevents duplicate MACD cross signals within a short time period. Useful when MACD crosses back and forth quickly, creating multiple signals. Debounce ensures only one signal per period, reducing signal spam during choppy markets. This is separate from alert cooldown, which applies to all alert types. Background Color Modes The script offers three background color modes: - Dynamic: Full MACD heatmap based on OB/OS conditions, confidence, and momentum. Provides rich visual feedback. - Monotone: Soft neutral background but still allows overlays (OB/OS zones). Keeps the chart clean without overpowering candles. - Off: No MACD background (only overlays and plots). Maximum chart cleanliness. When OB/OS background colors are enabled, they are drawn on top of the main background to ensure visibility. Statistics Table A real-time statistics table displays current MACD values, signal strength, distance from zero line, secondary timeframe alignment, volume confirmation status, and all active filter statuses. The table dynamically adjusts to show only enabled features, keeping it clean and relevant. The table position can be configured (Top Left, Top Right, Bottom Left, Bottom Right). Performance Statistics Table An optional performance statistics table shows comprehensive filter diagnostics: - Total buy/sell signals (raw crossover count before filters) - Filtered buy/sell signals (signals that passed all filters) - Overall pass rates (percentage of signals that passed filters) - Rejected signals count - Filter-by-filter rejection diagnostics showing which filters rejected how many signals This table helps optimize filter settings by showing which filters are most restrictive and how they impact signal frequency. The diagnostics format shows rejections as "X B / Y S" (X buy signals rejected, Y sell signals rejected) or "Disabled" if the filter is not active. Alert System The script includes separate alert conditions for each signal type: - MACD Cross: MACD line crosses above/below Signal line (with or without secondary confirmation) - Zero-Line Cross: MACD crosses above/below zero - Divergence: Regular and hidden divergence detections - Secondary Timeframe: Higher timeframe MACD crosses - Histogram MA Cross: Histogram crosses above/below its moving average - Histogram Zero Cross: Histogram crosses above/below zero - StochMACD: StochMACD overbought/oversold entries and %K/%D crosses - Histogram BB: Histogram touches/breaks Bollinger Bands - Volume Events: Volume climax and dry-up detections - OB/OS: MACD entry/exit from overbought/oversold zones - Strong Top/Bottom: sTop and sBottom signal detections Each alert type has its own cooldown system to prevent alert spam. The cooldown requires a minimum number of bars between alerts of the same type, reducing duplicate alerts during volatile periods. Alert types can be filtered to only evaluate specific alert types (All, MACD Cross, Zero Line, Divergence, Secondary Timeframe, Histogram MA, Histogram Zero, StochMACD, Histogram BB, Volume Events, OB/OS, Strong Top/Bottom). How Components Work Together MACD crossovers provide the primary signal when the MACD line crosses the Signal line. Zero-line crosses indicate momentum shifts and can provide early warning signals. Divergences identify potential reversals before they occur. Volume confirmation ensures signals occur with sufficient market participation, filtering out low-volume false breakouts. Histogram analysis tools (MA, Bollinger Bands, StochMACD) provide additional context for signal reliability and identify significant histogram zones. Signal strength combines multiple confirmation factors into a single score, making it easy to filter for only the strongest signals. Cross quality score rates crossover quality to identify high-quality setups. Multi-timeframe confirmation ensures signals align with higher timeframe trends, reducing counter-trend trades. Usage Instructions Getting Started: The default configuration shows MACD(12,26,9) with standard EMA calculations. Start with default settings and observe behavior, then customize settings to match your trading style. You can use configuration presets for quick setup based on your trading style. Customizing MACD Parameters: Adjust Fast Length (default 12), Slow Length (default 26), and Signal Length (default 9) based on your trading timeframe. Shorter periods (8,17,7) for faster signals, longer (15,30,12) for smoother signals. You can change the moving average type: EMA for responsiveness, RMA for smoothness, WMA for recent price emphasis. Price Source Selection: Choose Close (standard), or alternative sources (HL2, HLC3, OHLC4) for different sensitivity. HL2 uses the midpoint of the high-low range, HLC3 and OHLC4 incorporate more price information. Histogram Smoothing: Set smoothing to 1 for raw histogram (no smoothing), or increase (3-5) for smoother histogram that reduces noise. Higher smoothing reduces false signals but may delay signals slightly. Percentage Mode: Enable percentage mode when comparing MACD across instruments with different price levels. This normalizes MACD values, making them directly comparable. Dynamic OB/OS Levels: The dynamic thresholds automatically adapt to volatility. Adjust the multipliers (default 1.5) to fine-tune sensitivity: higher values (2.0-3.0) = more extreme thresholds (fewer signals), lower (1.0-1.5) = more frequent signals. Adjust the lookback period to control how quickly levels adapt. Enable OB/OS background colors for visual indication of extreme conditions. Volume Confirmation: Set volume threshold to 1.0 (default, effectively disabled) or higher (1.2-1.5) for standard confirmation. Higher values require more volume for confirmation. Set to 0.1 to completely disable volume filtering. Filters: Enable filters gradually to find your preferred balance. Start with histogram filter for basic momentum alignment, then add signal strength filter (threshold 50+) for moderate signals, then cross quality filter (threshold 50+) for high-quality crossovers. Combine filters for highest-quality signals but expect fewer signals. Divergence: Enable divergence detection and adjust pivot lookback parameters. Pivot-based divergence provides more accurate detection using actual pivot points. Hidden divergence is useful for trend-following strategies. Adjust range parameters to filter divergences by time window. Zero-Line Crosses: Zero-line cross alerts are automatically available when alerts are enabled. These provide early warning signals for momentum shifts. Histogram Analysis Tools: Enable Histogram Moving Average to see histogram trend direction. Enable Histogram Bollinger Bands to identify extreme histogram zones. Enable Stochastic MACD to normalize histogram to 0-100 scale for overbought/oversold identification. Multi-Timeframe: Enable secondary timeframe MACD to see higher timeframe context. Enable secondary confirmation to require higher timeframe alignment for signals. Signal Strength: Signal strength is automatically calculated and displayed in the statistics table. Use signal strength filter to only accept signals above a threshold (e.g., 50 for moderate, 70+ for strong signals only). Smart Label Placement: Configure label placement settings to control label appearance and quality: - Label Strength Minimum (%): Set threshold (default 75%) to show only strong signals. Higher = fewer, stronger labels - Label Spacing Multiplier: Adjust spacing (default 1.5x) for better distribution. Higher = more spacing between labels - Recovery/Decline Confirm (%): Set confirmation requirement (default 15%). Higher = more confirmation, fewer labels - Enforce Zero Line Polarity: Enable (default) to ensure Buy labels only appear when tracked extreme was below zero, Sell labels only when above zero - Historical Lookback: Adjust search period (default 20 bars) for finding true extremes. Higher = more history analyzed Cross Quality: Cross quality score is automatically calculated for crossovers. Use cross quality filter to only accept high-quality crossovers (threshold 50+ for moderate, 70+ for high quality). Alerts: Set up alerts for your preferred signal types. Enable alert cooldown (default enabled, 5 bars) to prevent alert spam. Use alert type filter to only evaluate specific alert types (All, MACD Cross, Zero Line, Divergence, Secondary Timeframe, Histogram MA, Histogram Zero, StochMACD, Histogram BB, Volume Events, OB/OS, Strong Top/Bottom). Each signal type has its own alert condition, so you can be selective about which signals trigger alerts. Visual Elements and Signal Markers The script uses various visual markers to indicate signals and conditions: - MACD Line: Green when above signal (bullish), red when below (bearish) if dynamic colors enabled. Optional black outline for enhanced visibility - Signal Line: Orange line with optional black outline for enhanced visibility - Histogram: Color-coded based on direction and momentum (green for bullish rising, lime for bullish falling, red for bearish falling, orange for bearish rising) - Zero Line: Horizontal reference line at MACD = 0 - Fill to Zero: Green/red semi-transparent fill between MACD line and zero line showing bullish/bearish territory - Fill Between OB/OS: Blue semi-transparent fill between overbought/oversold thresholds highlighting neutral zone - OB/OS Background Colors: Background coloring when MACD enters overbought/oversold zones - Background Colors: Dynamic or monotone backgrounds indicating MACD state, or custom chart background - Divergence Labels: "🐂" for bullish, "🐻" for bearish, "H Bull" for hidden bullish, "H Bear" for hidden bearish - Divergence Lines: Colored lines connecting pivot points when divergences are detected - Volume Climax Markers: ⚡ symbol for extremely high volume - Volume Dry-Up Markers: 💧 symbol for extremely low volume - Buy/Sell Strength Labels: Show signal strength percentage (e.g., "Buy Strength: 75%") - Strong Top/Bottom Labels: "sTop" and "sBottom" for extreme level recoveries - Secondary MACD Lines: Purple lines showing higher timeframe MACD - Histogram MA: Orange line showing histogram moving average - Histogram BB: Blue bands around histogram showing extreme zones - StochMACD Lines: %K and %D lines with overbought/oversold thresholds - Regression Forecast: Dotted blue lines extending forward with optional confidence bands Signal Priority and Interpretation Signals are generated independently and can occur simultaneously. Higher-priority signals generally indicate stronger setups: 1. MACD Cross with Multiple Filters - Highest priority: Requires MACD crossover plus all enabled filters (histogram, signal strength, cross quality) and secondary timeframe confirmation if enabled. These are the most reliable signals. 2. Zero-Line Cross - High priority: Indicates momentum shift. Can provide early warning signals before MACD crosses the signal line. 3. Divergence Signals - Medium-High priority: Pivot-based divergence is more reliable than simple divergence. Hidden divergence indicates continuation rather than reversal. 4. MACD Cross with Basic Filters - Medium priority: MACD crosses signal line with basic histogram filter. Less reliable alone but useful when combined with other confirmations. Best practice: Wait for multiple confirmations. For example, a MACD crossover combined with divergence, volume confirmation, and secondary timeframe alignment provides the strongest setup. Chart Requirements For proper script functionality and compliance with TradingView requirements, ensure your chart displays: - Symbol name: The trading pair or instrument name should be visible - Timeframe: The chart timeframe should be clearly displayed - Script name: "Ultimate MACD " should be visible in the indicator title These elements help traders understand what they're viewing and ensure proper script identification. The script automatically includes this information in the indicator title and chart labels. Performance Considerations The script is optimized for performance: - Calculations use efficient Pine Script functions (ta.ema, ta.sma, etc.) which are optimized by TradingView - Conditional execution: Features only calculate when enabled - Label management: Old labels are automatically deleted to prevent accumulation - Array management: Divergence label arrays are limited to prevent memory accumulation The script should perform well on all timeframes. On very long historical data with many enabled features, performance may be slightly slower, but it remains usable. Known Limitations and Considerations - Dynamic OB/OS levels can vary significantly based on recent MACD volatility. In very volatile markets, levels may be wider; in calm markets, they may be narrower. - Volume confirmation requires sufficient historical volume data. On new instruments or very short timeframes, volume calculations may be less reliable. - Higher timeframe MACD uses request.security() which may have slight delays on some data feeds. - Stochastic MACD requires the histogram to have sufficient history. Very short periods on new charts may produce less reliable StochMACD values initially. - Divergence detection requires sufficient historical data to identify pivot points. Very short lookback periods may produce false positives. Practical Use Cases The indicator can be configured for different trading styles and timeframes: Swing Trading: Use MACD(12,26,9) with secondary timeframe confirmation. Enable divergence detection. Use signal strength filter (threshold 50+) and cross quality filter (threshold 50+) for higher-quality signals. Enable histogram analysis tools for additional context. Day Trading: Use MACD(8,17,7) or use "Day Trading" preset with minimal histogram smoothing for faster signals. Enable zero-line cross alerts for early signals. Use volume confirmation with threshold 1.2-1.5. Enable histogram MA for momentum tracking. Trend Following: Use MACD(12,26,9) or longer periods (15,30,12) for smoother signals. Enable secondary timeframe confirmation for trend alignment. Hidden divergence signals are useful for trend continuation entries. Use cross quality filter to identify high-quality crossovers. Reversal Trading: Focus on divergence detection (pivot-based for accuracy) combined with zero-line crosses. Enable volume confirmation. Use histogram Bollinger Bands to identify extreme histogram zones. Enable StochMACD for overbought/oversold identification. Multi-Timeframe Analysis: Enable secondary timeframe MACD to see context from larger timeframes. For example, use daily MACD on hourly charts to understand the larger trend context. Enable secondary confirmation to require higher timeframe alignment for signals. Practical Tips and Best Practices Getting Started: Start with default settings and observe MACD behavior. The default configuration (MACD 12,26,9 with EMA) is balanced and works well across different markets. After observing behavior, customize settings to match your trading style. Consider using configuration presets for quick setup. Reducing Repainting: All signals are based on confirmed bars, minimizing repainting. The script uses confirmed bar data for all calculations to ensure backtesting accuracy. Signal Quality: MACD crosses with multiple filters provide the highest-quality signals because they require alignment across multiple indicators. These signals have lower frequency but higher reliability. Use signal strength scores to identify the strongest signals (70+). Use cross quality scores to identify high-quality crossovers (70+). Filter Combinations: Start with histogram filter for basic momentum alignment, then add signal strength filter for moderate signals, then cross quality filter for high-quality crossovers. Combining all filters significantly reduces false signals but also reduces signal frequency. Find your balance based on your risk tolerance. Volume Filtering: Set volume threshold to 1.0 (default, effectively disabled) or lower to effectively disable volume filtering if you trade instruments with unreliable volume data or want to test without volume confirmation. Standard confirmation uses 1.2-1.5 threshold. MACD Period Selection: Standard MACD(12,26,9) provides balanced signals suitable for most trading. Shorter periods (8,17,7) for faster signals, longer (15,30,12) for smoother signals. Adjust based on your timeframe and trading style. Consider using configuration presets for optimized settings. Moving Average Type: EMA provides balanced responsiveness with smoothness. RMA is smoother and less responsive. WMA gives more weight to recent prices. SMA gives equal weight to all periods. Choose based on your preference for responsiveness vs. smoothness. Divergence: Pivot-based divergence is more reliable than simple divergence because it uses actual pivot points. Hidden divergence indicates continuation rather than reversal, useful for trend-following strategies. Adjust pivot lookback parameters to control sensitivity. Dynamic Thresholds: Dynamic OB/OS thresholds automatically adapt to volatility. In volatile markets, thresholds widen; in calm markets, they narrow. Adjust the multipliers to fine-tune sensitivity. Enable OB/OS background colors for visual indication. Zero-Line Crosses: Zero-line crosses indicate momentum shifts and can provide early warning signals before MACD crosses the signal line. Enable alerts for zero-line crosses to catch these early signals. Alert Management: Enable alert cooldown (default enabled, 5 bars) to prevent alert spam. Use alert type filter to only evaluate specific alert types. Signal debounce (default enabled, 3 bars) prevents duplicate MACD cross signals during choppy markets. Technical Specifications - Pine Script Version: v6 - Indicator Type: Non-overlay (displays in separate panel below price chart) - Repainting Behavior: Minimal - all signals are based on confirmed bars, ensuring accurate backtesting results - Performance: Optimized with conditional execution. Features only calculate when enabled. - Compatibility: Works on all timeframes (1 minute to 1 month) and all instruments (stocks, forex, crypto, futures, etc.) - Edge Case Handling: All calculations include safety checks for division by zero, NA values, and boundary conditions. Alert cooldowns and signal debounce handle edge cases where conditions never occurred or values are NA. Technical Notes - All MACD values respect percentage mode conversion when enabled - Volume confirmation uses cached volume SMA for performance - Label arrays (divergence) are automatically limited to prevent memory accumulation - Background coloring: OB/OS backgrounds are drawn on top of main background to ensure visibility - All calculations are optimized with conditional execution - features only calculate when enabled (performance optimization) - Signal strength calculation combines multiple factors into a single score for easy filtering - Cross quality calculation rates crossover quality based on angle, volume, and distance from zero - Secondary timeframe MACD uses request.security() for higher timeframe data access - Histogram analysis features (Bollinger Bands, MA, StochMACD) provide additional context beyond basic MACD signals - Statistics table dynamically adjusts to show only enabled features, keeping it clean and relevant - Divergence detection uses MACD line (not histogram) for more reliable signals - Configuration presets automatically optimize MACD parameters for different trading styles - Smart label placement: Labels appear on current bar at confirmation, using strength from tracked extreme point - Label spacing uses effective distance (base distance × spacing multiplier) for better distribution - Zero line polarity enforcement ensures Buy labels only appear when tracked extreme MACD < 0, Sell labels only when tracked extreme MACD > 0 - Label finalization requires MACD exit from OB/OS zone, sufficient bars passed, and recovery/decline percentage confirmation - Strength-based filtering automatically compares and keeps only the strongest label when multiple signals are close together - Enhanced visualization: Line outlines drawn behind main lines for superior visibility (black default, configurable) - Enhanced visualization: Fill between MACD and zero line provides instant visual feedback (green above, red below) - Enhanced visualization: Fill between OB/OS thresholds highlights neutral zone when dynamic levels are active - Custom chart background overrides background mode when enabled, allowing theme-consistent indicator panels
Индикатор Pine Script®
от captain_ua
2
HaP MACDHaP MACD - Advanced DEMA Assisted Signal Indicator Overview The HaP MACD is an evolution of the classic MACD, designed for traders who demand faster response times and clearer trend visualisations. By integrating DEMA (Double Exponential Moving Average) logic into the standard MACD framework, this indicator filters out noise and highlights momentum shifts with a unique color-coded dot system. How It Works The indicator calculates two types of MACD: a standard one for the main lines and a DEMA-based one for signal generation. This dual approach ensures you stay in the trend while being alerted the moment the momentum starts to fade. Visual Guide & Color Logic The signal dots are placed directly on the MACD line to guide your decisions: 🔵 Blue Dot: The Entry Signal. Appears when DEMA conditions first align for a bullish move. 🟢 Green Dot: Strong Momentum. The trend is active and the MACD value is increasing. 🟠 Orange Dot: Warning Signal. The bullish trend is still active, but the momentum is slowing down (MACD is lower than the previous bar). 🔴 Red Dot: Exit Signal. The bullish condition has ended. It’s time to consider closing the position or tightening stops. Key Features Reduced Lag: DEMA integration provides earlier signals than standard EMA-based MACDs. Trend Monitoring: Easily distinguish between a healthy trend (Green) and a tiring trend (Orange). Customizable: Choose between EMA and SMA for both the oscillator and signal calculations. Crossover Markers: Optional triangle markers for classic MACD crossovers (can be enabled in settings).
Индикатор Pine Script®
от agahakanaga
24
SCOTTGO Advanced MACD🌟 Custom MACD: Enhanced Visuals & Crossover Signals This indicator is a highly customized version of the traditional Moving Average Convergence Divergence (MACD) oscillator, designed to provide clear, immediate visual confirmation of signal line crossovers and zero-line crossings. Core Features: MACD Crossover Shadow Fill: The area between the MACD line and the Signal line is filled with a customizable shadow. This instantly visualizes whether the MACD is above (bullish crossover) or below (bearish crossover) the Signal line. Signal Crossover Markers (Arrows & Dots): Crossover Dot: A small, configurable solid dot is plotted exactly at the point where the MACD and Signal lines intersect, providing pinpoint accuracy for the crossover event. Crossover Arrows: Customizable up (green) and down (red) arrows are plotted using a small numerical offset from the crossover point, ensuring visibility without cluttering the indicator lines. Zero-Line Crossing Markers: Distinct, small markers (circles/diamonds) are used to signal when the MACD line crosses the zero line, indicating a shift in momentum relative to the baseline. Customizable MA Type: The user can select either Exponential Moving Average (EMA) or Simple Moving Average (SMA) for both the MACD oscillator calculation and the signal line calculation. This indicator is ideal for traders who rely on MACD crossovers and require precise, configurable visual feedback directly on the chart.
Индикатор Pine Script®
от SCOTTGO
VWAP-Anchored MACD [BOSWaves]VWAP-Anchored MACD - Volume-Weighted Momentum Mapping With Zero-Line Filtering Overview The VWAP-Anchored MACD delivers a refined momentum model built on volume-weighted price rather than raw closes, giving you a more grounded view of trend strength during sessions, weeks, or months. Instead of tracking two EMAs of price like a standard MACD, this tool reconstructs the MACD engine using anchored VWAP as the core input. The result is a momentum structure that reacts to real liquidity flow, filters out weak crossovers near the zero line, and visualizes acceleration shifts with clear, high-contrast gradients. This indicator acts as a precise momentum map that adapts in real time. You see how weighted price is accelerating, where valid crossovers form, and when trend conviction is strong enough to justify execution. It uses gradient line coloring to show bullish or bearish momentum, histogram shading to highlight energy shifts, cross dots to mark valid crossovers, optional buy/sell diamonds for execution cues, and candle coloring to display trend strength at a glance. Theoretical Foundation Traditional MACD compares the difference between two exponential moving averages of price. This variant replaces price with anchored VWAP, making the calculation sensitive to actual traded volume across your chosen period (Session, Week, or Month). Three principles drive the logic: Anchored VWAP Momentum : Price is weighted by volume and aggregated across the selected anchor. The fast and slow VWAP-EMAs then expose how liquidity-corrected momentum is expanding or contracting. Zero-Line Distance Filtering : Crossover signals that occur too close to the zero line are removed. This eliminates the common MACD problem of generating weak, directionless signals in choppy phases. Directional Visualization : MACD line, signal line, histogram, candle colors, and optional diamond markers all react to shifts in VWAP-momentum, giving you a clean structural read on market pressure. Anchoring VWAP to session, weekly, or monthly resets creates a systematic framework for tracking how capital flow is driving momentum throughout each trading cycle. How It Works The core engine processes momentum through several mapped layers: VWAP Aggregation : Price × volume is accumulated until the anchor resets. This creates a continuous, liquidity-corrected VWAP curve. MACD Construction : Fast and slow VWAP-EMAs define the MACD line, while a smoothed signal line identifies edges where momentum shifts. Zero-Line Distance Filter : MACD and signal must both exceed a threshold distance from zero for a crossover to count as valid. This prevents fake crossovers during compression. Visual Momentum Layers : It uses gradient line coloring to show bullish or bearish momentum, histogram shading to highlight energy shifts, cross dots to mark valid crossovers, optional buy/sell diamonds for execution cues, and candle coloring to display trend strength at a glance. This layered structure ensures you always know whether momentum is strengthening, fading, or transitioning. Interpretation You get a clean, structural understanding of VWAP-based momentum: Bullish Phases : MACD > Signal, histogram expands, candles turn bullish, and crossovers occur above the threshold. Bearish Phases : MACD < Signal, histogram drives lower, candles shift bearish, and downward crossovers trigger below the threshold. Neutral/Compression : Both lines remain near the zero boundary, histogram flattens, and signals are suppressed to avoid noise. This creates a more disciplined version of MACD momentum reading - less noise, more conviction, and better alignment with liquidity. Strategy Integration Trend Continuation : Use VWAP-MACD crossovers that occur far from the zero line as higher-conviction entries. Zero-Line Rejection : Watch for histogram contractions near zero to anticipate flattening momentum and potential reversal setups. Session/Week/Month Anchors : Session anchor works best for intraday flows. Weekly or monthly anchor structures create cleaner macro momentum reads for swing trading. Signal-Only Execution : Optional buy/sell diamonds give you direct points to trigger trades without overanalyzing the chart. This indicator slots cleanly into any momentum-following system and offers higher signal quality than classic MACD variants due to the volume-weighted core. Technical Implementation Details VWAP Reset Logic : Session (D), Week (W), or Month (M) Dynamic Fast/Slow VWAP EMAs : Fully configurable lengths, smoothing and anchor settings MACD/Signal Line Framework : Traditional structure with volume-anchored input Zero-Line Filtering : Adjustable threshold for structural confirmation Dual Visualization Layers : MACD body + histogram + crosses + candle coloring Optimized Performance : Lightweight, fast rendering across all timeframes Optimal Application Parameters Timeframes: 1- 15 min : Short-term momentum scalping and rapid trend shifts 30- 240 min : Balanced momentum mapping with clear structural filtering Daily : Macro VWAP regime identification Suggested Configuration: Fast Length : 12 Slow Length : 26 Signal Length : 9 Zero Threshold : 200 - 500 depending on asset range These suggested parameters should be used as a baseline; their effectiveness depends on the asset volatility, liquidity, and preferred entry frequency, so fine-tuning is expected for optimal performance. Performance Characteristics High Effectiveness: Assets with strong intraday or session-based volume cycles Markets where volume-weighted momentum leads price swings Trend environments with strong acceleration Reduced Effectiveness: Ultra-choppy markets hugging the VWAP axis Sessions with abnormally low volume Ranges where MACD naturally compresses Disclaimer The VWAP-Anchored MACD is a structural momentum tool designed to enhance directional clarity - not a guaranteed predictor. Performance depends on market regime, volatility, and disciplined execution. Use it alongside broader trend, volume, and structural analysis for optimal results.
Индикатор Pine Script®
от BOSWaves
20
Supertrend + MACD + HMAIndicator Description: Supertrend + MACD + HMA General Summary It is a composite technical indicator that combines three analysis tools to generate buy and sell signals in institutional trading. It uses confirmation from multiple indicators to increase the precision of market entries. Components 1. Supertrend (ST) Function: Identifies the main market trend (bullish or bearish) Parameters: ATR Length 10, Factor 3.0 Visualization: Green line = Bullish trend Red line = Bearish trend Semi-transparent green/red background that fills the area according to direction How it works: Uses ATR (Average True Range) to calculate dynamic support and resistance bands 2. MACD (Moving Average Convergence Divergence) Function: Measures price momentum and direction Parameters: Fast 18, Slow 144, Signal Smoothing 9 Components: MACD Line (orange): Difference between two EMAs Signal Line (purple): EMA of the MACD Histogram (green/red columns): Difference between MACD and its signal Green = Positive histogram (bullish momentum) Red = Negative histogram (bearish momentum) 3. HMA 100 (Hull Moving Average) Function: Identifies support/resistance level and price direction Parameters: Length 100 Visualization: Blue thick line Characteristics: Less lag than traditional moving averages Price > HMA = Bullish trend Price < HMA = Bearish trend Signal Logic 🟢 BUY SIGNAL Generated when ANY of these conditions is met: Total Confluence: MACD positive (histogram > 0) Price above HMA 100 Supertrend in Bullish mode Supertrend Change: Supertrend changes from Bearish to Bullish MACD remains positive Price above HMA Price Crossover: Price crosses above HMA (at candle close) Supertrend is in Bullish mode MACD is positive 🔴 SELL SIGNAL Generated when ANY of these conditions is met: Total Confluence: MACD negative (histogram < 0) Price below HMA 100 Supertrend in Bearish mode Supertrend Change: Supertrend changes from Bullish to Bearish MACD remains negative Price Crossover: Price crosses below HMA (at candle close) Supertrend is in Bearish mode MACD is negative Important Features ✅ Single Signal Per Type Once a BUY is generated, no other BUY is generated until a SELL appears Avoids multiple entries in the same direction ✅ Crossover Detection The indicator generates signals at candle close when price crosses HMA Allows capturing quick market moves ✅ Trend Changes Detects when Supertrend changes direction Provides early exits from the market ✅ Automatic Alerts Push notifications when BUY or SELL is generated Ideal for automated trading
Индикатор Pine Script®
от julioperez75955