Mix signal-rileksdevMix Signal Indicator by rileksdev
Indikator ini mengandungi
-3 line bewarna hjau,merah,biru
-1 indikator MACD yang sudah diubahsuai supaya boleh mengesan pergerakan awal harga akan turun atau naik.
-Support & Resistance sudah tersedia pada chart,jadi tidak perlu susah payah cari sendiri
-Buy signal & Sell signal yang keluar apabila harga akan membuat kenaikan atau penurunan
Cara guna:
Line biru: digunakan untuk intraday timetrame 5minit.
Line hijau & merah digunakan untuk Intraday pada timeframe 15minit timeframe 30minit untuk swing short term atau midterm.
MACD MOD untuk mengesan pergerakan awal harga akan turun atau naik.
Garis bintik hijau(Support) & Garis bintik merah (Resistance) yang sudah tersedia pada Chart
Buy signal apabila harga akan membuat kenaikan
Sell signal apabila harga akan membuat penurunan
Multi-timeframe
Multi-Indicator/Multi-Timeframe Panel | Agora AlgoWe strongly believe in order to be a profitable trader you need to understand what is happening on multiple timeframes, not just the timeframe you are trading on. We put together this script to help traders fix that problem and make multi-timeframe analysis as simple as a small "Panel" that you can glimpse at as well as customize. Too often we see traders focusing only on lower or singular timeframes resulting in opening positions at overbought/oversold areas or against the long-term trend. Hopefully with this approach we can help encourage all traders to take the initiative and responsibility to really do that multi-timeframe analysis.
The way it works is very simple but very useful. By default the script is looking for the direction of trend on all timeframes and sending that data to the "Panel". You as the user have the ability to change what the script/"Panel" will look for. Other available analysis methods are detecting RSI oversold and RSI overbought conditions on all of the timeframes as well as detecting Bollinger oversold and overbought conditions on all of the timeframes. You as the user also have the ability to customize all kinds of variables so that you are able to find what best suits your trading style.
Customizable options/variables:
MA Calculation Type
Fast/Short MA Length
Slow/Long MA Length
RSI Length
Bollinger Bands Length
Bollinger Bands Standard Deviation
Reference Manual/Documentation:
For Trend Detection the emoji ⏫ means UPTREND
For RSI Detection the emoji ⏫ means OVERBOUGHT
For Bollinger Detection the emoji ⏫ means OVERBOUGHT
For Trend Detection the emoji ⏬ means DOWNTREND
For RSI Detection the emoji ⏬ means OVERSOLD
For Bollinger Detection the emoji ⏬ means OVERSOLD
The 🔲 emoji means that neither of the above conditions are TRUE which usually when only happen when using RSI or Bollinger Mode.
The 🔲 emoji will also mask any timeframe lower than the timeframe you are currently viewing on the chart. Because security functions are used in this script/indicator we have taken the necessary precautions to follow
Tradingview/Pinescript best practices. With that being said best practices advise not to pull data from lower timeframes as security functions were initially intended for pulling higher timeframe data. Best practices tell us
there is a good chance of data loss when attempting to pull data from lower timeframes so we have removed the ability/chance of that happening.
Bonus Customizations:
You as the user also have the ability to enable a shortened version of the reference manual onto the "Panel" by enabling the option in the settings. If you need to get a quick idea of what the terminology stands for you could
check there and it will be defined for you.
We hope you enjoy what we have created and would appreciate any feedback! Remember guys, RISK MANAGEMENT and DO YOUR MULTI-TIMEFRAME ANALYSIS! Cheers!
Mint 3x Multi Timeframe EMA
Multi Time Frame 3x EMA - adjustable as per preference
Defaults set as 50, 100, 200
Change Time frame in settings as needed
Enjoy x
Profit Accumulator Heat MapHi Everyone
Happy to share this heat map packed full of indicators to make those trading decisions. There are a whole host of indicators including:
Inverse Fischer Transform
Moving Average Slope
EMA50 Crossover
Schaff Trend Cycle
MACD
RSI
Stochastic RSI
Moving Average Cross Over
Quantitative Qualitative Estimation
On Balance Volume
All of the indicators are customisable in the settings so you can adjust them to how you want.
I often find that the combination of MACD and QQE provide good early entry and exit signals.
Any comments or improvements then please feel free to get in touch.
Cheers
Mike
Big thanks go to @everget, @JustUncleL and @LazyBear for the use of their codes.
RSI MTF thresholds with auto adjustmentThe RSI MTF thresholds panel allows for identification of strong trends across multiple timeframes with automatic adjustment for different timeframes by utilising multiples of the chosen resolution. A specific timeframe can be used by entering its multiple in the corresponding Resmult() box.
The panel shows the current timeframe as well as 4 additional timeframes, displaying whether the RSI level is above a high threshold or below a low threshold.
A green or red indication on all timeframes is a strong indication of a trend that has some staying power on the timeframe under examination.
Markets that are ranging with no identifiable trend will show blank spaces.
Failure of the trend to "climb up" the panel shows a weak trend, while repeated signals in the same direction is a strong indication of a trend forming as the RSI level is prevented from cycling to the opposing extreme.
High probability continuations can be identified by a brief loss of signal at the lowest level of the panel only (corresponding to the current timeframe).
Setting the thresholds higher towards the overbought/oversold regions will identify levels that are oversold on multiple timeframes.
Happy to take suggestions or attempt to modify if there is interest.
Multi Timeframe Moving Average [xdecow]This indicator plots a moving average of 4 different timeframes.
The types of averages available are: SMA, EMA, DEMA, VWMA, RMA, WMA.
SRSI/CCI :: ALLinPower v10.0
Everything you see in this indicator has beed designed with purpose to ease your trading with visual technical analysis of the market. It pulls data from 7 different TimeFrames and it can not be more simpler visual representation of its calculations when applied on chart.
When applied on chart, you will see two sets of WAVES. First set is made out of SRSI calculation and the second is made out of CCI calculation. Both of them follows the same rules.
Background GREEN/RED wave is made out of Multiple Timeframes and it represents a TREND. GREEN for LONG, RED for SHORT trend.
Over the background wave there is a wave made of current TimeFrame data and its main purpose is to see when the POWER of certain direction will diminish. The less time little wave stays in current trend the more likely is that it will change the trend based on lack of power the market is getting in certain direction.
HOW TO USE IT?
Rule 1.
TIMEFRAMES
Choose the best TimeFrame for the job. I use: 1min, 2min, 3min, 5min, 8min, 13min, 21min, 34min or 56min (golden ratio). You can also pick a different TF but only to up to 1h TF chart as it does not work well with TF over 1h. Smaller TF is used for SCALPING of DAY TRADING higher TF is used for SWING TRADING. You get the picture?
Rule 2
TO ENTER BUY/LONG POSITION: When big trend wave is below the middle line and coloured in RED and little wave just entered the area and exits it very soon after. Basically when RED straight line gets smaller and smaller (the POWER of SHORT diminishes) it is a sign for LONG.
TO ENTER SELL/SHORT POSITION: When big trend wave is over the middle line and coloured in GREEN and little wave just entered the area and exits it very soon after. Basically when GREEN straight line gets smaller and smaller (the POWER of LONG diminishes) it is a sign for SHORT.
To ease yourself the spotting of this instances just follow the GREEN/RED dots and use ALERTS (choose BUY POWER for LONG signals or choose SELL POWER for SHORT signals) to make yourself free from staring at a computer/mobile all the time and just wait for a signal.
Rule 3
CAUTION
Do not rush to enter a position and try to predict what indicator will do next. It does not end well.
Be aware you are not exiting a position in panic that would be too soon or even worse, you get married to bad trade and you are not exiting even though you should exit by many signals you get.
Use risk management strategy to protect your capital.
Follow the rules and make your trading easier and better.
RSI :: ALLinDivergence v10.0
Everything you see in this indicator has been designed with a single purpose, to ease your trading with simplify visual technical analysis of the market. It pulls data from 7 different TimeFrames and it can not be more simpler visual representation of its calculations when applied on chart.
When applied on chart, you will see GREEN/RED alternating MTF RSI line and its 70 overbought area and its 30 oversold area. There is a gentle purple colour line in the background which represents RSI line of the current TF (it is not crucial but it helps to know why MTF line turns RED or turns GREEN (crossing of those two).
HOW TO USE IT?
Rule 1.
TIMEFRAMES
Choose the best TimeFrame for the job. I use: 1min, 2min, 3min, 5min, 8min, 13min, 21min, 34min or 56min (golden ratio). You can also pick a different TF but only to up to 1h TF chart as it does not work well with TF over 1h. Smaller TF is used for SCALPING of DAY TRADING higher TF is used for SWING TRADING. You get the picture?
Rule 2
TO ENTER BUY/LONG POSITION: search for HigherLows on RSI MTF GREEN/RED LINE when it is coloured RED. To enter a position it should be confirmed with AALERT :: ALLinDivergence v 10.0 that "GREEN" Divergence is emerging.
TO ENTER SELL/SHORT POSITION: search for LowerHighs on RSI MTF GREEN/RED LINE when it is coloured GREEN. To enter a position it should be confirmed with ALERT :: ALLinDivergence v 10.0 that "RED" Divergence is emerging.
Rule 3
EXIT FROM BUY/LONG POSITION: search for HigherLows on RSI MTF GREEN/RED LINE.
EXIT FROM SELL/SHORT POSITION: search for LowerHighs on RSI MTF GREEN/RED LINE.
Rule 4
CAUTION
Do not rush to enter a position and try to predict what indicator will do next. It does not end well.
Be aware you are not exiting a position in panic that would be too soon or even worse, you get married to bad trade and you are not exiting even though you should exit by many signals you get.
Use risk management strategy to protect your capital.
Follow the rules and make your trading easier and better.
ALERTS :: ALLinDivergence v10.0
Everything you see in this indicator has a designated purpose to ease your trading with predefined ALERTS of high quality. It pulls data from 7 different TimeFrames and it can not be more simpler visual representation of its calculations when applied on chart.
When applied on chart, it will colour your chart BARS/CANDLE to the colour PURPLE as that colour is well known colour of Relative Strength Indicator line that indicates overbought or oversold area. RSI is used as a main source of information/data for this indicator.
Second reason of colour PURPLE is that it cancels all the noise that default green/red bars have.
This indicator also has GREEN/RED colouring of BARS/CANDLES and they appear when something crucial is happening in the market. That something needs to be checked ASAP. This green/red coloured bars are just there to remind you that something can happen and it does not mean that market would actually change direction it is just a "friendly warning" you can use when creating alerts.
The best thing about this indicator is those full coloured GREEN/RED LITTLE DOTS.
They represent DIVERGENCES emerging and possible actual change of market direction. To be sure, you need to analyse your chart more in depth any way you prefer to get your needed confirmations. To do that, use your strategy that you have been using when trading up until now or even better, use indicator that I made and is called RSI :: ALLinDivergence v 10.0 -> It is a visual representation of ALERT :: ALLinDivergence v 10.0 indicator signals. Very easy to analyse in minutes.
HOW TO USE IT?
Rule 1.
TIMEFRAMES
Choose the best TimeFrame for the job. I use: 1min, 2min, 3min, 5min, 8min, 13min, 21min, 34min or 56min (golden ratio). You can also pick a different TF but only to up to 1h TF chart as it does not work well with TF over 1h. Smaller TF is used for SCALPING of DAY TRADING higher TF is used for SWING TRADING. You get the picture?
Rule 2
To ENTER A POSITION
Find the best TF that suits your needs. That depends on your trading style (day trading, scalping, swing trading, ect.). To know which TF is the best for you you also need to look for a good quality signals when looking the chart in the past (visual BACKTESTING). Signals from past should yield positive results.
When you wish to trade certain pair, find the best TF and from there you need to "Create Alert". Choose this indicator when creating alerts and from dropdown menu pick "GREEN" for Divergence BUY/LONG signals or "RED" Divergence SELL/SHORT signals. Then choose "Greater Than" and change the value to "1" (that will set off the alarm), choose how you want to be notified and then name the ALERT so you will know how it is made.
Do not forget to do your work and analyse your market situation best way you can and get needed confirmations before doing anything about it.
Rule 3
TO EXIT A POSITION
From the same TF as Divergence alerts are made from (Rule 2), you can make alerts that are just a "friendly warning" that something is happening on the market you are in an opened position. Instead of picking GREEN or RED from dropdown menu when creating alerts, you need to pick GREEN BARS or RED BARS and the rest is the same as with rule 2.
Rule 4
CONFIRMATIONS
Help yourself with any type of analysis you need to get the confirmations you need to enter or exit the position. Use the style you always have up until now. Or find a better one that is quicker and with good yield.
There is a great option that can change your way of thinking about trading and it is called RSI :: ALLinDivergence v 10.0 indicator that is used as a visual representation of ALERTS indicator. It takes literally minutes to do whole analysis - remember it uses data from 7 different TimeFrames and it is really good! Just find LowerHighs of RSI curve for SHORT or HigherLows for LONG.
Machine Learning: kNN-based Strategy (mtf)This is a multi-timeframe version of the kNN-based strategy.
Multitimeframe Pivot HiLoPivot High/Low for multi timeframes.
Could be great entry filter to include multi time frame pivots in trend trading strategies.
PHInkTrade Price FinderHello there, fellow trader!
Welcome to Price Finder indicator for TradingView page.
Please join me as I present you an overview about it.
Before we begin, a few quick notes:
Availability information is presented at the last section of this content. Please check it out to know how to get access.
In addition to this description, there is also an overview video available. Please refer to the last section on this content as well.
With time, some of the functionality described below may change. Please refer to Release Notes for most up-to-date information.
Ok now, let's get started!
What is Price Finder?
Price Finder is a technical analysis indicator (aka "Indi" ), built on a mathematical foundation which recognizes price's fractal, multi-layered nature -- a key aspect, related to the multiple time-frames process different size traders use to make their decisions.
The objective of the indicator, naturally, is to help identify high probability opportunities for successful trades , especially those which can provide a good return : risk ratio (greater than 3:1). This is very important to foster sustainable equity growth over time .
In order to do that, it helps identify new positions of previously successful support and resistance levels , out of both its multi time-frame mathematical approach, and empirical evidence. By mapping these, indicator provides a good way to anticipate next levels with high success probability, as well as to validate or invalidate expectations in relation to what price is more likely to do next.
Last, but not least, it also helps identify price state , in terms of trend and consolidation . Meaning that, if price is trending, we can expect it to go farther -- either higher or lower --, in a more consistent way. Or, if it is consolidating, we can expect it to remain trading inside a range.
Combined, these aspects help you develop an enhanced view of the market , and a better edge for your trades.
Feedbacks from beta phase
Before diving into more details, i'd like to let you know that, besides internal tests, the indicator has gone through a public beta testing phase , having received quite nice feedback from participants . You can find more information about it in the overview video, as mentioned above.
How it works?
As seen on chart below, indicator is composed of:
a Trend Band
two Expansion Threshold Bands and
Bar colors .
Let's get through each of these.
Trend Band
The Trend Band is the one which runs around the middle of the indicator, and helps you assess if you should be leaning bullish or bearish, locally -- considering the time frame you are looking at. Its inflection points , also known as death crosses and golden crosses, are important events to anticipate -- and pay attention to when they happen. There's also a middle line , which helps you evaluate if price is leaning towards crossing the band to the other side.
The following chart shows some examples* of how lines can help identify potential places to have new trades.
* More information about specific trading approaches is available through complementary materials.
So, Trend Band helps us adjust our bias towards a direction. But how far can we expect price to go?
To help answer this question, the indicator also provides two other bands. Let's talk about them, next.
Expansion Threshold Bands
The Expansion Threshold Bands are the ones usually surrounding price (not always, as you'll notice). They are called the Upper Expansion Threshold Band and the Lower Expansion Threshold Band . Their purpose is to help identify potential limits , or places where price is more likely to face a contrarian force , and will probably have to decide whether to continue in the same direction, or to pull back -- end eventually revert.
On the following chart we have an example (Bitcoin, 15 minutes time-frame). It was retracing locally, but once it hit the corresponding Lower Expansion Threshold, it found strong support, making it pull back, and look to test upper structures, next . In fact, as can be seen, this support was tested and respected three times on this chart. Conversely, the Upper Expansion Threshold Band, resistance, was tested and broken twice -- an effect, and validation, of the overall uptrend Bitcoin was in.
Broken Expansion Threshold Bands
Indicator also helps adjust expectations when price breaks an Expansion Threshold . As an example, on the following chart, we see Bitcoin breaking the 15 mins lower band, after having respected it multiple times during the rise. The result was a significant correction.
So, when price breaks an Expansion Threshold Band of a particular time-frame, we can expect it to expand in that same direction for a while. In other words, we can expect it to trend in that direction, until it finds a larger time-frame Expansion Threshold which can hold it.
To help with this aspect, here enters indicator's distinctive multiple time-frame overlays functionality .
Multiple time-frame overlays
Multiple time-frames is a very important aspect to understand and consider when dealing with an asset's price, as different size traders make decisions based on each of them -- and, naturally, this requires us to deal with the combined results of all such decisions.
On the chart below, (again, Bitcoin 15 minutes time-frame), standard indicator deployment is showing where supports are for some of the lows. But there are moments when price stop "mid-air". Why is it so?
Well, this happens due to the influence of another time-frame structure (in this case, a smaller one). To identify which structures are working, it is possible to apply the indicator one or more times to the chart, and perform an empirical research . In this case, bounces were caused by the 10 minute lower threshold band, approximately.
This feature allows you to see, on a single chart, multiple time-frame structures working at once -- which, besides bringing greater clearness, can also help you save time, by skipping the handling of multiple charts.
Note : TradingView recommends using a lower time-frame chart and deploying a higher time-frame overlay. However, within a good margin, the reverse practice has proven itself to work for Price Finder, as indicator's approach is evidence-based. So, whichever smaller time-frame overlay which shows itself as working, even though on a higher time-frame chart, should continue to do so, as calculations remain proportional.
Another example below, now showing 5 minutes working as support multiple times too (besides 10 and 15).
So, by researching which supports and resistances are being repeatedly respected, out of price's multi time-frame / multi layered reality, and finding their current price levels -- both through the means of the indicator --, it is possible to anticipate high probability places for successful trades -- either in favor of the structure, if you believe in a stop-and-reverse move, or against it, if structure gets broken and allows price to start expanding / trending. Always based on both a mathematical foundation, and an empirical observation (evidence / confirmation).
Bar colors
As an additional information to help you understand if price is trending (or starting to develop trend intentions), or if it is consolidating , the indicator provides bar color schemes.
By default, it uses dark green and dark red colors for initial developments of bullish and bearish trends , bright green and bright red colors for developed, stronger trends , and orange for consolidations . Knowing such states help you build more confidence in the movement -- or not.
Color-blind friendly setting
Colors-wise, indicator also offers the possibility to use a second scheme, more friendly to color-blind users. You can change color scheme on settings panel.
Other settings
There are other ways to customize the presentation of the indicator , especially regarding multiple time-frame overlays , as we saw, but also to help you manage and reduce chart clutter , for example, in terms of number of lines being plotted.
It's possible to decide to just plot backgrounds, or some part of the structure, or avoid painting bars, etc.
Sample chart settings, explained
What you see on the chart above:
3 deployments of Price Finder, one for each of the following time frames: 1 hour ('Chart' time-frame), 15 and 4 minutes.
Custom settings:
1 hour: Upper and lower expansion threshold bands plotted in full. Trend band hidden;
15 minutes: Trend band hidden, expansion thresholds with just backgrounds (for better visibility);
4 minutes: likewise.
Price Finder working with other assets
Here are some other examples of the indicator, now working with other assets.
Time-frames used to 'calibrate' readings were observed from previous evidence on the same charts.
Ethereum / US Dollar, 4 hour chart, with 100, 50 and 25 minutes overlays.
S&P 500, 1 hour chart, with 30, 15 and 5 minutes overlays.
Dow Jones Industrial Average, also 1 hour chart, with 4 hours, 15 and 5 minutes overlays.
Gold / US Dollar, 1D chart, with 600 minutes, 4 hours, 140 and 80 minutes overlays.
Euro / US Dollar, 4 days chart, with 1 day, 700 minutes and 4 hours overlays.
Availability and more information
For indicator availability, access instructions, and/or additional information, please use the corresponding link in the external links section below.
Thank you very much for your attention!
Cheers!
PHInkTrade
MTF_HA & CANDLE [by coral1213]Hi traders.
This is a multi-timeframe Heikin-Ashi candle chart script.
There is no repaint.
This is used when you want to see a high time frame Heikin-Ashi candle on the candlestick chart.
1. HTF RESOLUTION = Frame of output candle... 1H=60, 4H=240, 1D=1D, 1W=1W...
2. HTF SOURCE TYPE = Selects the target chart mode for the output candle... Candlestick of HighTimeFrame or Heikin-ashi of HighTimeFrame
3. HTF RESOLUTION HIGHLIGHT = Marks the beginning of the selected resolution.
For better visibility, it is recommended to turn off the optional border color.
Enjoy Trade
Cosmic Multi-timeframe ChannelsThis script creates 3 channels out of common moving average plots, 1 in the user-specified timeframe (densely-colored) and 2 in higher multiples of the user-specified timeframe (progressively weaker-colored).
In this instance, the user-specified timeframe is 1D and shows the 1D channel. As the higher timeframe multiples are by default set to 3 and 9, they show the channels for 3D and 9D timeframes.
Triple RSIThis idea behind this indicator was to show an un cluttered view of the RSI on 3 different timeframes. The RSI for the current chart highlights Lime/Red when it crosses the Overbought and Oversold levels, which are editable in the Inputs tab. RSI 2 defaults to the 1h timeframe and prints a lime dot at the top of the indicator when it's above the 50 level and a Red Dot at the bottom of the indicator when it's below the 50 level. It can also be viewed as a plot line that changes color when it's above or below the 50 level. RSI 3 defaults to the 4h timeframe and prints a blue square at the top of the indicator when it's above the 50 level and an orange square at the bottom of the indicator when it's below the 50 level. It also can be viewed as a plot line that changes color when it's above or below the 50 level.
I've added the indicator multiple times to show a few of the different viewing options, with the default settings at the very bottom.
Asif Multi VwapMulti Time frame Vwap in One Script to identify Trend & identify supports & resistance.
Thanks
piphunter sspiphunter ss the latest indicator in the pip hunter suite its single aim is to combine important trend analysis from multiple time frames and display the estimated direction of price based off that multi-timeframe analysis
the multi-timeframe analysis is done with a series of modified SSL channels taking data from 4 different time frames and then assimilating that with a pair of moving averages periods then through a series of calculations using those 2 moving averages gives you a signal line and what we call the bacd line when they cross it signifies a new trend direction to enable entry and exit points in a lower time frame whilst still respecting the overall trend from higher time frames
things that this displays
- symbol above or below candles when multiple time frames line up in the same direction and confirmed with the integrated maths mentioned above
- recoloured candles when an overbought or oversold condition is met
This is best used with the rest of the pip hunter package for more info on getting access to all indicators in the package. Please message me for more information.
12 multi time frame MA displayed on specific timeframe/複数MTF MAJapanese below. / 日本語説明は下記
——Republishing after issues pointed out by a moderator resolved.—————
This indicator shows 12 sets of multi time frame moving average(MTF MA) from different time frames which is weekly, daily, 4 hour and 1 hour to lower time frames.
Purpose
This indicator has been developed to show higher timeframe’s moving average as they are expected to work as support and resistance .
How is it different from other MTF MA indicators?
Problems with other conventional MTF MA indicators are;
1.If you set higher timeframe MA, it will also be shown on further higher time frames.
e.g. If you set 4hour chart’s MA on 1 hour or lower time frame charts, it will also appear on daily and weekly chart, which is unnecessary and annoys your chart.
2.One indicator displays one MTF MA only which impacts the number of indicators that you can set.
To tackle these problems, this indicator has incorporated functions below.
1. Control time frames where MTF MA is displayed to avoid showing unnecessary information.
2. One indicator contains 12 MTF MA in which 3 MTF MA from weekly chart, 3 MTF MA from daily chart , 3 MTF MA from 4 hour chart and 3 MTF MA from 1 hour chart. Thus, this contributes to save the number of indicators that you can set.
These are the value added on this indicator.
Specification
-This indicator shows weekly MTF MA, daily MTF MA, 4 hour MTF MA and 1 hour MTF MA.
To be clear, daily MTF MA means that moving average created based on daily chart , which can be shown on daily chart and lower timeframes.
-Each MTF MA will be shown as follows based on timeframes that you select.
1. Weekly MTF MA: Shown on weekly, daily, 4hour, 1 hour, 30M, 15M and 5M chart(Monthly chart does not show MTF MA)
2. Daily MTF MA: Shown on daily, 4hour, 1 hour, 30M, 15M and 5M chart(Weekly and Monthly chart does not show MTF MA)
3. 4hour MTF MA: Shown on 4hour, 1 hour, 30M, 15M and 5M chart(Daily, Weekly and Monthly chart does not show MTF MA)
4. 1hour MTF MA: Shown on 1 hour, 30M, 15M and 5M chart(4hour, Daily, Weekly and Monthly chart does not show MTF MA)
-Each MTF MA can be enabled and disabled by ticking checkbox.
Sample chart with the indicator
●Sample parameters setting
2 MA from weekly timeframe and 3 MA from daily timeframe set.
Here is how MAs are displayed.
It does not show anything.
Only 2 MA from weekly timeframe are shown. MA from daily timeframe are not appeared. This is the difference between this indicator and other conventional MTF MA indicators.
You can see 5 MAs, which are 2 MA from weekly timeframe and 3 MA from daily timeframe .
<4hour chart>
<15M chart>
Journey to use indicator
This indicator is paid indicator and invited-only indicator.
Please contact me via private chat or follow links in my signature so that we can initiate the process to access the indicator
--------------------------------------------------------------------------------------------------
週足、日足、4時間足、1時間足という異なる複数のタイムフレームから最大で12本(各タイムフレームから3本ずつ)のマルチタイムフレーム移動平均線を設定できるインジケーターです。
インジケーターの目的
上位足の移動平均線を下位足に表示することで、上位足での目線を持ったまま下位足の分析を行ったり、上位足によるレジサポの判断に使うことを想定しています。
他のマルチタイムフレーム移動平均線との違い
他のマルチタイムフレーム移動平均線インジケーターでは、よく以下の問題に直面します。
・上位足の移動平均線を表示しようとすると、さらに上位足でもその移動平均線が表示され、チャートが見にくくなる。
例: 4時間足の移動平均線を1時間足で表示可能なように設定すると、日足や週足でも4時間足の移動平均線が表示され、チャートがノイズだらけに・・・
・一つのインジケーターでは原則一つの移動平均線のみ表示。異なる時間軸のマルチタイムフレーム移動平均線を表示しようとするとその数だけインジケーターを追加する必要あり。
これらの問題に対応するため、このインジケーターでは、
・マルチタイムフレーム移動平均線を表示する時間軸を制御することで上位足側に不必要な情報を表示させない。これによりチャートをスッキリと見やすくすることができる。
・週足、日足、4時間足、1時間足という4つの異なる時間軸から3つずつ、最大で12本のマルチタイムフレーム移動平均線を設定可能。これによりインジケーター数を節約。
という機能を加えることでこれらの問題を解決しています。
これがこのインジケーターが提供する付加価値だと考えています。
仕様
機能概要
・このインジケーターでは週足、日足、4時間足、1時間足の4つの時間軸のマルチタイムフレーム移動平均線を表示します。
・設定できる移動平均線は週足から3本、日足から3本、4時間足から3本、1時間足から3本の最大12本まで設定可能です。
・それぞれの移動平均線はSMA(単純移動平均線)とEMA(加重移動平均線)を選択することができます。期間の設定も移動平均線ごとに設定可能です。
・各移動平均線は表示しているチャートの時間軸に応じて以下の様に表示されます。
例えば週足の移動平均線を設定すると、その移動平均線は週足、日足、4時間足、1時間足、30分、15分、5分足に表示されます。
・毎回チャートを開くごとにそれぞれの移動平均線の表示・非表示を切り替えることは可能ですが、この移動平均線はこの時間足では常に非表示といった制御は不可能です。
サンプルチャート
週足の移動平均線を2本、日足の移動平均線を3本設定した場合のチャートの例です。
<月足>
月足では週足の移動平均線も日足の移動平均線も表示されません。
<週足>
週足では2本の移動平均線のみが表示されていることがわかります。
日足の移動平均線が上位足である週足に表示されないのが、他のマルチタイムフレーム移動平均線との違いです。
<日足>
日足では週足と日足両方の移動平均線が表示されます。
<4時間足>
<15分足>
インジケーターの使用について
当インジケーターは招待制インジケーター(有料)となっています。
使用を希望される方はプライベートチャットや下記リンクのDMでご連絡ください。
このページのコメント欄はインジケーターそのものに対するコメントやアップデートの記載のためのものとなっております。Tradingviewのハウスルールを守るためにもコメント欄からの連絡はご遠慮ください。
Multi Time Frame Bollinger Bands(Daily/4H/1H)/MTFボリンジャーバンドJapanese below. / 日本語説明は下記
-----Republishing after issues resolved.---------
Summary
This indicator shows 3 multi time frame Bollinger bands (MTF BB) from different time frames which is daily, 4 hour and 1 hour to lower time frames with 3 bands(+-1-3ς).
Example: If you set daily BB, it will be shown on daily, 4hour, 1hour, 30M, 15M, 5M and 1M charts. It will not appear on weekly and monthly charts as it is not necessary to see it on higher time frames.
Purpose
This indicator has been developed to show higher timeframe’s BB as they are expected to work as support and resistance .
How is it different from other BB indicators?
Problems with other conventional BB indicators are;
-If you set higher timeframe BB(MTF BB), it will also be shown on further higher time frames.
i.e. If you set 4hour chart BB on 1 hour or lower time frame charts, it will also appear on daily and weekly chart, which is not necessary.
-One indicator displays one BB only which impacts the number of indicators that you can set(depending on your account plan)
-One indicator displays one band only. If you need 1-3ς, you need to add the same BB indicator.
To tackle these problems, this indicator has incorporated functions below.
-Control timeframes where BB is displayed to eliminate unnecessary information on higher time frames.
-One indicator contains 3 BB with 3 bands(minus 1-3ς & plus 1-3ς) which contributes to save the number of indicators that you can set.
These are the value added on this indicator.
Spec
-This indicator shows daily BB, 4 hour BB and 1 hour BB.
To be clear, daily BB means that BB created based on daily chart , which can be shown on lower timeframes.
-Each BB displays 3 bands(minus 1-3ς & plus 1-3ς) and middle line
-Display of each band can be parameterized to show and not to show
e.g. Showing only plus/minus 2 and 3ς etc.
-The middle line adopts SMA ( simple moving average ) only and you can set period of SMA .
-Each BB will be shown as follows based on timeframes that you select.
Daily BB: Shown on daily, 4hour, 1 hour, 30M, 15M, 5M and 1M chart
(Weekly and Monthly chart does not show BB)
4hour BB: Shown on 4hour, 1 hour, 30M, 15M, 5M and 1M chart
(Daily, Weekly and Monthly chart does not show BB)
1hour BB: Shown on 1 hour, 30M, 15M, 5M and 1M chart
(4hour, Daily, Weekly and Monthly chart does not show BB)
-Each BB can be enabled and disabled by ticking checkbox.
e.g. On 1 hour chart, you can disable 4 hour BB and show daily BB only etc.
Please see the sample chart below.
Sample chart with the indicator
Daily chart
4hour chart showing daily BB and 4H BB
1hour chart showing daily BB, 4H BB and 1H BB
5Mchart showing daily BB, 4H BB and 1H BB
Journey to use indicator
This indicator is paid indicator and invited-only indicator.
Please contact me via private chat or follow links in my signature so that we can initiate the process to access the indicator
--------------------------------------------------------------------------------------------------
日足、4時間足、1時間足の3つのボリンジャーバンド(プラスマイナス1-3シグマのバンド)を下位足含めて表示するマルチタイムフレームボリンジャーバンドのインジケーターです。
インジケーターの目的
上位足のボリンジャーバンドを下位足に表示することで、レジサポの判断に使うことを想定しています。
他のボリンジャーバンドインジケーターとの違い
他のボリンジャーバンドインジケーターでは、よく以下の問題に直面します。
・上位足のボリンジャーバンドを表示しようとすると、さらに上位足でもそのバンドが表示されチャートがみにくくなる。
例: 4時間足のボリンジャーバンドを下位足で表示可能な様に設定すると、日足や週足でも表示され、チャートがノイズだらけに・・・
・一つのインジケーターでは一つのボリンジャーバンドのみ表示。異なる時間軸のボリンジャーバンドを表示しようとするとその数だけインジケーターを追加する必要あり。
・バンドが一つしか設定できず、1-3シグマまで表示しようとするとインジケーターを追加する必要がある。
これらの問題に対して、このインジケーターでは、
・ボリンジャーバンドを表示する時間軸を制御することで上位足側で不必要な情報を表示させない。これによりチャートをスッキリ見やすくすることができる。
・一つのインジケーターで3つの異なる時間軸のボリンジャーバンドを表示し、かつそれぞれでプラスマイナス1-3のバンドを表示することでインジケーター数を節約。
という機能を加えることでこれらの問題を解決しています。
これがこのインジケーターが提供する付加価値だと考えています。
仕様
機能概要
・このインジケーターでは日足、4時間足、1時間足の3つの時間軸のボリンジャーバンドを表示します。
・それぞれのボリンジャーバンドはプラスマイナス1-3シグマまでのバンドと基準線を表示します。
・各バンドは表示・非表示の切り替えが可能です。(例: プラスマイナス2、3シグマのみ表示など)
・各ボリンジャーバンドの基準線（ミドルライン）はSMA（単純移動平均線）です。移動平均線の期間は自由に設定できます。
・各ボリンジャーバンドは表示しているチャートの時間軸に応じて以下の様に表示されます。
日足のボリンジャーバンド : 日足, 4時間足、1時間足、30分足、15分足、5分足、1分足チャートにのみ表示（週足以上では非表示の仕様です。）
4時間足のボリンジャーバンド : 4時間足、1時間足、30分足、15分足、5分足、1分足チャートにのみ表示（日足以上では非表示の仕様です。）
1時間足のボリンジャーバンド : 1時間足、30分足、15分足、5分足、1分足チャートにのみ表示（４時間足以上では非表示の仕様です。）
・各ボリンジャーバンドは表示・非表示のフラグをON/OFFにすることで表示を制御することができます。
例えば1時間足のチャートでは日足のボリンジャーバンドのみを表示し、4時間足のボリンジャーバンドを表示させない、など。
サンプルチャート
日足
日足では日足ボリンジャーバンドしか表示されない設定ですので、4時間足や1時間足の設定が邪魔になりません。
ここが他のボリンジャーバンドインジケーターと違う点です。
4時間足
4時間足に日足と4時間足のボリンジャーバンドを表示した状態です。不要な場面では両方もしくはいずれか一方を非表示にすることができます。
1時間足
1時間足に日足と4時間足と1時間足のボリンジャーバンドを表示した状態です。
5分足
5分足に全てのボリンジャーバンドを表示したチャートです。
短期トレードで上位足ボリンジャーバンドによる反発を狙う時などに活用できるのではないでしょうか。
インジケーターの使用について
当インジケーターは招待制インジケーター(有料)となっています。
使用を希望される方はプライベートチャットや下記リンクのDMでご連絡ください。
このページのコメント欄はインジケーターそのものに対するコメントやアップデートの記載のためのものとなっております。Tradingviewのハウスルールを守るためにもコメント欄からの連絡はご遠慮ください。
Renko MTF - Traditional and ATRSomehow there aren't too many renko bars that have the traditional setting built-in so I put one up. This one has the option to choose between Traditional and ATR, the size number corresponds to the option that was chosen. And just in case if anyone wanted, I put up a multi-time frame option to choose the time frame the bars take place. D is for day, W is for week, flat numbers are in minutes, and leaving it blank looks at the current time frame the chart is in. The calculation comes from how Tradingview handles renko bars.
Renko bars don't paint a color unless the market moves a certain amount based on its settings. When the market moves up it turns green, if it moves down it turns red, simple color changes alone can say a lot. They're a good way to try to find trends somewhat objectively and seem to be a good way to eliminate time and can replace other time-based indicators that can whipsaw or lag. The bars have a tendency to repeat themselves so it's a good way to find trends. There aren't too many settings for the box size, most people either just choose 5, 10, 14, etc where as other indicators have many options that differ on different markets. The numbers can be chosen easily enough to pick a sweet spot with just a single input where other indicators such as MACD have multiple inputs to pick the right number that can make it difficult to choose from(although it won't be as precise as a MACD would sometimes but can be worth the objectiveness and consistency and same setting repeatability in different markets in my opinion). Some example strategies could be to use them as an alternative trailing stop, finding trends, a simple color change for entry and exit on top of other strategies, etc. It can do the job of many in an all in one price action type indicator(although not better all the time, it can come close enough). Despite all this, it does seem to depend on which time-frame it's being looked at, how TV does the calculation for it, and how one can use this with the lack of practical information on it out there.
Moving Averages - 5 Ribbon MTF HeatmapThis is a 5 Ribbon heatmap moving averages indicator where each represents a different time frame, The RED or GREEN color palette is also affected by asset velocity using ATR.
Supports various moving averages including VMA (Default), Zero Lag, TSF (Time Series Forecast).
A single ribbon is set to GREEN when fast MA (moving average) is above the slower MA and RED when fast MA is below the slower MA.
In the settings you can set the ATR length (Average True Range) which will affect the velocity calculation for the colors, higher ATR length will smooth the coloring more (Less color changes), while lower ATR will show more instant changes.
HOW TO USE?
The brighter the GREEN is the stronger the up trend.
The brighter the RED is the stronger the down trend.
A weakening GREEN color can be a sign for a down reversal.
A weakening RED color can be a sign for a up reversal .
Supports alerts when fast moving average crosses slow moving average from all time frames, either way, up or down.
Comments/Suggested/Positive feedbacks are welcome and can make this indicator even better.
Follow for upcoming indicators: www.tradingview.com
MTF VWAP + Fibo Incremental deviationsI made a Fibo variant of my first script "VWAPs + devs" :
This new indicator give you the possibility to plot multi timeframes VWAP (D, W, M, 3M and 12M ) and Fibo deviations for each one.
VWAP is a powerfull indicator which is used by big players to get informations if the price is "overbought" or "oversold". Deviations give the opportunity to have supports and resistances in those "over"-zones.
I searched for better results and found those defaults values :
Fib 1 level : 0.618
Fib 2 level : 0.786
Fib 3 level : 1.000
Fib 4 level : 1.618
Fib 5 level : 2.618
In the thumbnail, we can see that the 1.618 deviation level made a great support on the last uptrend for BTCUSDT .
You can change each values but low ones as 0.382 and 0.5 don't give really interesting supports/resistances.
I made this script as clear and simple as possible with only one menu in the parameters.
Some examples of what you can do :
BTCUSDT (Binance) H4 / D, W, M, 3M ,12M VWAP without devs
BTCUSDT (Binance) M5 / Daily VWAP + Fibo devs
Hope this will be useful for you !
Parabolic SAR (MTF)This is a multi-timeframe Parabolic SAR indicator which uses 1 and 4 hour charts.
Using this indicator is simple, if the LifeTime line is green then buy, if red then sell OR don't trade. So...
Green Line - This strategy is in a buy position
Red Line - This strategy is in a sell position
Any other colour - DON'T TRADE
The traders approach is simple, when all indicators are green or red, then take the trade. As soon as one indicator changes, then re-evaluate using your normal process, such as price action, to determine whether to close the trade or continue.
If you require any further information or script modifications, please message me.
PLEASE CHECK OUT MY OTHER SCRIPTS
