JackFinance:MA 14/25/99/200 BundleThis MA combination (14, 25, 99, 200) is a comprehensive trend-following system designed to synchronize short-term momentum with long-term structural trends. By using these specific periods, you can distinguish between minor "noise" and major market shifts.
Here is the strategic breakdown and usage guide for this setup:
Roles of the Four Moving Averages
The MA14 (Short-Term Momentum) Think of this as your "Front-Line Scout." It is highly sensitive to price action. In a strong trend, the price should stay above (in an uptrend) or below (in a downtrend) this line. If the price breaks the 14, it is the first warning that the immediate momentum is fading.
The MA25 (The Trend Filter) This acts as a buffer for the 14. It filters out "fakeouts." A common rule of thumb is that as long as the 14 remains above the 25, the short-term trend is healthy. It often serves as a psychological support level for traders looking to enter on minor pullbacks.
The MA99 (The Structural Support) This is a medium-to-long-term indicator that represents the "Value Area" for institutional investors. It is often referred to as the "Backbone" of a trend. When price retraces to the 99 and bounces, it confirms that the larger trend is still intact.
The MA200 (The Ultimate Anchor) This is the most significant line in technical analysis, used globally by banks and hedge funds. It defines the "Market Regime." If the price is above the 200, you are in a Bull Regime; if below, you are in a Bear Regime. The slope of the 200 tells you the "macro" direction of the market.
Practical Usage Strategies
1. Trend Alignment (The Fan Effect) The strongest trading opportunities occur when all four lines "fan out" in order.
Bullish Alignment: Price > 14 > 25 > 99 > 200. This indicates a perfect harmony where all timeframes are moving upward. This is a "Buy and Hold" environment.
Bearish Alignment: Price < 14 < 25 < 99 < 200. This indicates a heavy downtrend. In this scenario, every rally should be viewed as a potential selling opportunity.
2. The Pullback Entry Strategy In a confirmed uptrend (where 99 and 200 are pointing up), do not chase the price when it is far above the lines. Instead, wait for a "Mean Reversion." A high-probability entry occurs when the price dips into the zone between the MA25 and MA99. If the price finds support there and prints a bullish candle, it suggests the correction is over and the primary trend is resuming.
3. The Gravity Effect & Mean Reversion Moving averages act like magnets. If the price moves too far away from the MA200 (Extreme Extension), the "Gravity Effect" increases. Eventually, the price will snap back toward the 99 or 200. If you see the 14 and 25 starting to curve back toward the 200, it’s a signal to take profits or tighten stop-losses.
4. The Crossover Warning Watch the interaction between the MA14 and MA25. When the 14 crosses below the 25, it is a "Dead Cross" on a micro-scale, suggesting a deeper correction toward the MA99 is coming. Conversely, when the 14 crosses back above the 25 while above the 200, it is a high-conviction "Buy" signal.
Important Considerations
Timeframe Performance: This specific combination is most effective on Daily (D) and 4-Hour (4H) charts. On lower timeframes like the 1-minute or 5-minute, the 99 and 200 may produce too much lag.
Sideways Markets: During "Choppy" or sideways price action, these lines will flatten out and intertwine. In this scenario, the signals become unreliable. Moving averages are trend-following tools; they require a clear direction to work effectively.
The Golden Rule: Never fight the MA200. If the MA200 is sloping down and the price is below it, any "Buy" signal from the 14 or 25 is high-risk and should be treated as a short-term scalp only.
Индикаторы и стратегии
Pivot Points Standard (Sub Levels) by ysfgnrPivot Points Standard (Sub Levels)
Pivot Points Standard (Sub Levels) is a fully customizable pivot point indicator designed to identify key support and resistance levels across multiple timeframes. It supports all major pivot calculation methodologies and optionally adds Fibonacci-based sub levels between main pivot zones for increased precision.
The indicator is suitable for both intraday and higher-timeframe analysis and is optimized for clean visual output and efficient performance.
Key Features
Multiple pivot calculation types:
Traditional
Fibonacci
Classic
Woodie
DM
Camarilla
Flexible pivot timeframe selection:
Auto
Hourly
4-Hourly
Daily
Weekly
Monthly
Quarterly
Yearly
Biyearly
Triyearly
Quinquennially
Decennially
Standard pivot levels:
Pivot (P)
Resistance levels (R1–R5)
Support levels (S1–S5)
Fibonacci sub levels:
Sub levels are calculated using ratio values (for example 0.236, 0.382, 0.5, 0.618, 0.786)
Each ratio represents the proportional distance between two adjacent main pivot levels
Ratios are applied symmetrically to both resistance and support zones
Each ratio can be individually enabled or disabled
Fully customizable ratio values
Independent line style and color controls for sub levels
Advanced labeling system:
Optional level names
Optional price display
Optional percentage distance from Pivot (P)
Independent control of price and percentage visibility
Left or right label positioning
Line extension control:
Original mode extends lines according to the selected pivot timeframe
Special mode extends the latest pivot levels to the right by a user-defined number of bars
Efficient drawing logic:
Configurable number of historical pivot sets
Automatic cleanup of old lines and labels
Optimized to respect TradingView object limits
Notes
Percentage values represent the absolute distance from the Pivot (P).
Support levels display positive percentage values for consistency.
Sub level ratios define how far a sub level is placed between two main pivot levels.
The indicator adapts automatically to the selected calculation method and timeframe.
TruTrend Market Bias PRO+ (Responsive)TruTrend Pro+ — Advanced Market Bias & Signal System
TruTrend Pro+ is a premium, real-time trading system built to identify market bias, momentum shifts, and high-probability buy/sell opportunities with clarity and precision.
Pro+ analyzes trend structure, momentum strength, volatility, and higher-timeframe alignment to filter out noise and highlight only the most meaningful moves. Signals update live and are designed to appear early enough to capture the move, while still maintaining confirmation to avoid chop.
This is not a repainting indicator.
Signals are generated in real time and adapt as price evolves.
What Pro+ Helps You Do
• Identify bullish vs bearish market bias
• Catch momentum shifts and reversals
• Stay aligned with the dominant trend
• Avoid low-quality, sideways conditions
• Enter with structure instead of emotion
Designed For
• Stocks
• Crypto
• Futures
• Options
• Forex
Works across scalping, day trading, and swing trading on any timeframe.
Access
This script is Public & Invite-Only.
To use Pro+, you must subscribe via the official access link below and enter your TradingView username to receive instant access.
🔐 Subscribe here: whop.com
TruTrend Market Bias FREETruTrend — Market Bias & Signal Indicator (Free)
TruTrend (Free) is a real-time market bias and signal indicator designed to help traders see trend direction and key buy/sell moments with clarity.
This version focuses on core trend structure and momentum shifts, giving you a clean visual read of the market without clutter. Signals update live and are intended to help traders stay on the right side of the move.
TruTrend Free is built to be simple, fast, and easy to use — ideal for traders who want structure without complexity.
What the Free Version Provides
• Market bias (bullish vs bearish)
• Basic buy & sell signals
• Trend structure visualization
• Clean, easy-to-read chart layout
Important Notes
• Signals are real-time and non-repainting
• Designed for general guidance, not trade automation
• Works across all markets and timeframes
Upgrade to Pro / Pro+
For advanced filtering, earlier entries, stronger confirmations, and premium features, check out TruTrend Pro and Pro+.
🔓 Upgrade access: whop.com
CAB + CISD with Zone AltersCAB + CISD with Zone Alerts
Selling and Buying Climax Alters Indicator
⚠️ DEVELOPMENT PHASE - PLEASE READ
This indicator is currently in a Beta / Testing Phase.
Do NOT trade directly based solely on these alerts.
I am publishing this for Community Feedback to refine the logic.
I need your help: Please use this indicator on your charts and let me know in the comments what improvements, filters, or bugs you find. Your feedback is essential to making this tool better for everyone.
IcebergCryptoX - Week Data Gap📊 BTC WEEKEND DATA COLLECTION
This indicator analyzes Bitcoin movements during weekends when traditional US markets are closed.
🎯 DATA COLLECTED:
- Gap from Friday close → Monday open (%)
- Maximum upward/downward movements during the weekend
- Total weekend range
- Mean reversion rate (return to Friday closing price)
- Movement direction (positive/negative/neutral)
- Historical records (biggest gaps and ranges)
📈 FEATURES:
✓ Colored zones to visually identify weekends
✓ Detailed labels on each weekend with key metrics
✓ Real-time statistics table
✓ Tracking of extremes and averages
✓ 100% data collection (no trading signals)
⚙️ PARAMETERS:
- Display weekend zones (on/off)
- Display labels (on/off)
- Statistics table (on/off)
- Significant movement threshold (customizable)
📉 USAGE:
Ideal for analyzing BTC volatility patterns outside US trading hours and identifying recurring opportunities.
Recommended timeframe: 15min to 1H
TruTrend Market Bias PRO+ (Responsive)TruTrend Pro+ — Advanced Market Bias & Signal System
TruTrend Pro+ is a premium, real-time trading system built to identify market bias, momentum shifts, and high-probability buy/sell opportunities with clarity and precision.
Pro+ analyzes trend structure, momentum strength, volatility, and higher-timeframe alignment to filter out noise and highlight only the most meaningful moves. Signals update live and are designed to appear early enough to capture the move, while still maintaining confirmation to avoid chop.
This is not a repainting indicator.
Signals are generated in real time and adapt as price evolves.
What Pro+ Helps You Do
• Identify bullish vs bearish market bias
• Catch momentum shifts and reversals
• Stay aligned with the dominant trend
• Avoid low-quality, sideways conditions
• Enter with structure instead of emotion
Designed For
• Stocks
• Crypto
• Futures
• Options
• Forex
Works across scalping, day trading, and swing trading on any timeframe.
Access
This script is Public & Invite-Only.
To use Pro+, you must subscribe via the official access link below and enter your TradingView username to receive instant access.
🔐 Subscribe here: whop.com
Premarket + Previous Day High/LowPremarket & Previous Day High/Low Indicator for TradingView
This TradingView script displays two essential sets of price levels to help identify key support and resistance zones throughout the trading day:
🔍 What it Does
Premarket High/Low Levels
Tracks the high and low price between 4:00 AM and 9:30 AM EST (premarket session).
Once the market opens, it locks in those levels and plots them across the rest of the trading day for easy reference.
Helps you spot potential breakouts, rejections, or support/resistance around early session extremes.
Previous Day High/Low Levels
Displays the prior day’s high and low using data from the daily timeframe.
Useful for identifying major zones where price might bounce, reverse, or consolidate.
🎯 How Traders Use It
Identify potential gap fills, breakouts, or fakeouts.
Build trading setups using price action around key zones.
Combine with other indicators (RSI, volume, EMA, etc.) for confluence.
Use for risk management or stop loss placement near known levels.
Reversal RadarReversal Radar
Unified exhaustion detection across 5 distinct reversal patterns — see confluence at a glance.
What It Does
Reversal Radar consolidates 5 independent reversal detection algorithms into a single indicator with a stacked diamond visualization. When any detector fires, you see a vertical stack of diamonds — colored diamonds show which specific patterns triggered, ghost (white) diamonds show which didn't.
More colored diamonds = stronger confluence = higher conviction setup.
The 5 Detectors
Diamond Detector What It Finds
🔴 Red Liquidity Trap Pivot reversal with wick rejection, liquidity sweep, and momentum trap (fading trapped traders)
🟠 Orange Structural Divergence Pivot at new extreme with RSI divergence against major structure
🔵 Light Blue Band Rejection Full candle body outside Bollinger Bands with rejection wick
🟢 Green Panic Snap 5-bar waterfall (consecutive lower lows) snapping back during VIX spike — Long only
🟣 Purple Capitulation Engulf Bullish engulfing at lower BB with steep band decline during elevated VIX — Long only
How To Read It
Long Signals (below bar): 5-diamond stack
• Bottom to top: Liquidity Trap → Structural Divergence → Band Rejection → Panic Snap → Capitulation Engulf
Short Signals (above bar): 3-diamond stack
• Bottom to top: Band Rejection → Structural Divergence → Liquidity Trap
Ghost diamonds (faded white) = that detector did NOT fire Colored diamonds = that detector fired
Colors are consistent between long and short — same detector = same color regardless of direction.
Key Features
• Confluence visualization — instantly see how many independent patterns agree
• No parameter tweaking — all detector settings are pre-tuned and hardcoded
• VIX-aware — the two "capitulation" detectors (Panic Snap, Capitulation Engulf) only fire during elevated VIX conditions
• Session filtering — built-in BOD/EOD blocking to avoid noisy open/close periods
• MTF Bias Table — optional multi-timeframe trend bias display (5m/15m/1H/4H/D)
• Detector Legend — on-chart reference showing what each color means (adjustable size and position)
• Bollinger Bands — optional BB overlay display
Settings
Module Toggles — Enable/disable each of the 5 detectors independently:
• Enable Liquidity Trap
• Enable Structural Divergence
• Enable Band Rejection
• Enable Panic Snap (Long Only)
• Enable Capitulation Engulf (Long Only)
Session Blocking — Define trading session and minutes to block at open/close
Display — Toggle Bollinger Bands, MTF Bias Table position
Legend — Toggle detector legend, adjust position and text size (tiny/small/normal)
Best Used For
• Identifying high-probability reversal zones where multiple exhaustion signatures align
• Filtering out weak signals (single detector) vs strong setups (2-3+ detectors)
• Spotting capitulation bottoms during VIX spikes (Panic Snap + Capitulation Engulf)
• Mean reversion plays at Bollinger Band extremes
Notes
• This indicator is designed for intraday reversal trading on liquid instruments (SPY, QQQ, ES, NQ, etc.)
• The VIX-gated detectors (Panic Snap, Capitulation Engulf) are long-only by design — they're specifically tuned for capitulation bottoms
• Works best on 3m-15m timeframes
• All detector parameters are locked to tested values — this is intentional to keep the indicator simple and consistent
"When multiple exhaustion patterns converge, the market is telling you something."
Midnight Open Levels by haze!This indicator automatically plots the midnight open prices for both the New York (00:00 EST) and London (00:00 GMT) trading sessions. These levels are widely recognized in institutional trading frameworks as significant reference points for intraday price action.
What Are Midnight Open Levels?
Midnight open levels represent the price at which each major trading session begins at 00:00 local time. Institutional traders and algorithmic systems often reference these levels when making trading decisions, which can create zones of increased liquidity and potential price reactions.
This indicator is provided for educational purposes. No indicator guarantees profitable trades. Always practice proper risk management, use appropriate position sizing, and conduct your own analysis before making trading decisions.
Band Very Slow Moving Average (supfabio)Supfabio Band Very Slow M.A. is a clean, chart-friendly overlay built to help you **read trend context and price extremes** with a single “slow” baseline and a symmetric volatility-style band around it.
At its core, the script plots a **Very Slow Moving Average (SMA)** and two **percentage bands** (Upper/Lower) that expand/contract based on your chosen offset. The MA and bands **share the same trend color**, so you can instantly see whether the baseline is rising or falling without needing extra indicators.
### What you get on the chart
* **Very Slow MA (SMA)** as the main baseline (right scale).
* **Upper/Lower Bands** at a configurable % distance from the MA.
* Optional **band fill** and **trend background** for faster visual scanning.
* Optional **BUY / SELL labels** when price closes outside the bands (mean-reversion / exhaustion style context).
* Optional **CLOSE reference markers + horizontal target lines** to help you visualize potential “return-to-mean” or reaction levels.
### How the signals work (high level)
This indicator is **not a strategy** and does not “predict” the market. Instead, it highlights **conditions**:
* **BUY label**: when price closes **below the lower band** (potential downside extension).
* **SELL label**: when price closes **above the upper band** (potential upside extension).
* An optional **“Only first candle beyond band (cross)”** mode helps reduce repeated labels by triggering only on the first decisive move beyond the band.
* A **cooldown** option can further reduce repeated same-direction signals.
### CLOSE reference lines (visual guidance, not a promise)
When enabled, the script can draw **horizontal dotted reference lines** derived from the MA’s turning structure (using confirmed swing logic) and manage them to keep the chart readable. As price action evolves, these lines may:
* Extend with time while the “case” is active (dotted),
* Flip to **solid** when a valid touch/confirmation occurs (based on your settings),
* And optionally print a small **CLOSE marker** on the level.
To prevent clutter near the current price, the indicator includes a **“Merge dotted lines within ticks (near price)”** setting that consolidates nearby dotted levels into a cleaner view.
### Inputs you’ll care about
* **MA Length**: controls how “slow” the baseline is.
* **Band offset (%)**: sets the distance of the upper/lower band from the MA.
* **Signals**: toggle labels, cross-only behavior, and cooldown.
* **Close module**: toggle close markers/lines and adjust confirmation behavior.
* **Merge dotted lines (ticks)**: keeps the chart readable when multiple levels form close together.
### Alerts
The script supports alerts for:
* **BUY / SELL**
* **BUY_CLOSE / SELL_CLOSE**
These are meant to help with notifications and workflow automation. Always validate signals in your own process before acting.
### Notes & limitations
* Designed for **standard OHLC candles/bars**. Results may be misleading on non-standard chart types.
* Any swing/turn-based logic can appear **after confirmation**, which means some elements naturally print with a delay.
* This tool is best used as **context** alongside your own confirmation rules (structure, trend, volume, risk management).
**Disclaimer:** This indicator is for educational and informational purposes only and does not constitute financial advice. Trading involves risk; always test settings and use proper risk management.
1st Impulse 1st Impulse — How to Use It
1st Impulse is a rule-based trading indicator built to help you trade fast, clean moves with consistent management. It was designed mainly for the New York session, and it is optimized for the 1-minute chart, especially on NASDAQ and Gold futures.
⸻
Best Markets and Why
This indicator is focused on futures contracts that have strong liquidity, reliable movement, and enough volatility to hit realistic targets during the session windows.
NASDAQ: NQ and MNQ
• NQ (E-mini Nasdaq) and MNQ (Micro E-mini Nasdaq) follow the same chart movement, but with different contract size.
• NASDAQ is popular because it often produces clear impulse bursts—strong pushes followed by pullbacks. That “push + pullback” behavior is exactly what this indicator is built to work with.
• MNQ is 1/10 the size of NQ, which makes it easier to trade smaller risk while still trading the same strategy.
Gold: GC and MGC
• GC (Gold futures) and MGC (Micro Gold) also follow the same chart movement, but with different contract size.
• Gold often moves in clean levels and reactions, and it can trend smoothly during active sessions.
• MGC is 1/10 the size of GC, allowing smaller accounts to trade the same structure without oversizing risk.
Why the “micro” versions matter (MNQ / MGC):
They let you trade the exact same setup with much smaller dollar risk per tick, which is ideal if you want tighter control, smaller drawdowns, or more flexibility with position sizing.
⸻
Best Timeframe and Why (1 Minute)
Recommended timeframe: 1 minute.
This indicator was built around:
• fast impulse sequences,
• quick activation rules,
• short “decision windows” after entry.
On the 1-minute chart:
• You see the impulse behavior in real time.
• Entries and stop placement are more precise.
• The break-even warning logic (after the trade is live) works as intended, because it is based on counting candles after activation.
On higher timeframes (like 5m or 15m):
• the impulse becomes “smoother” but less precise,
• signals happen later,
• stop sizes grow larger,
• and the same rules don’t behave the same way.
So, if you want the indicator to operate the way it was designed, 1 minute is the best choice.
⸻
Sessions
You can choose only one session in settings:
• New York: 09:30–11:30 (New York time) (original design — usually best results)
• Asian: 18:00–20:00
• London: 03:00–05:00
Even though you can switch sessions, New York is the main focus because it typically has the strongest movement and the cleanest impulse behavior on NASDAQ and often Gold.
⸻
Risk Control and Contract Sizing (Simple and Practical)
One of the most useful features is the contract sizing display inside the SL box.
Two display modes
Inside the stop-loss (SL) box you can choose:
• Ticks (classic view): shows the stop distance in ticks
• Contracts (risk view): shows how many contracts to trade based on your risk
How “Contracts” mode works
1. You choose what market type you’re trading:
• NQ / MNQ
• GC / MGC
2. You enter your risk amount in dollars (example: $200).
3. The indicator calculates how many contracts fit your risk:
• It measures the stop distance (in ticks),
• converts that stop distance into dollars for the selected contract,
• then tells you how many contracts you can trade without exceeding your risk.
If the stop is too large for your risk, it will show:
• 0 contracts
Meaning: this trade is not valid for your risk plan.
This is important because it protects you from the biggest mistake traders make:
taking a good setup with the wrong position size.
A setup can be correct, but if size is too large, one loss can damage your account and your mindset.
⸻
Trade Activation and Cancellation
A setup is not automatically a live trade.
• A trade becomes LIVE only when price touches the entry level.
Cancel rule (important)
If price reaches the take-profit level before it ever touches entry first, the setup is canceled.
That means it does not count, and the indicator is free to look for the next opportunity.
⸻
Loss Rules
A loss is counted when:
1. The next candle after the signal candle fully crosses from entry to stop (100% cross).
2. After the trade is live, if price hits stop-loss before take-profit (stop-loss wins ties).
⸻
Take Profit and Risk-Reward
Take profit is calculated automatically using your Risk-Reward (RR) setting:
• If RR is X6, TP is set at 1:6 relative to the stop distance.
• RR is easy to adjust in settings to match your style.
• You can also adjust the SL buffer (ticks) if you want extra room.
⸻
Break-Even Warning (Key Feature)
After a trade becomes live, the indicator checks early follow-through:
• It counts 4 candles after activation
• If the 4th candle closes inside the take-profit box, you get a quick break-even reminder for one candle:
• A highly visible line appears at entry
• A message appears under the stats bar:
“trail SL to BREAK EVEN”
• Both disappear on the next candle
This is designed to help you protect yourself from a common market behavior:
price moves in your favor, then pulls back hard. Trailing to break-even at the right moment can prevent a winning trade from turning into a loss.
⸻
Stats Bar (Top of Screen)
The stats bar gives quick performance feedback:
• TP = number of wins
• SL = number of losses
• LIVE = live trades (only shows when a live trade exists)
• TOTAL = all counted trades
• Win% = win rate
• rr 1:X = your current RR setting
• 𝗥: = simplified score:
• Win = +RR
• Loss = -1
• Live = 0
Stop counting 𝗥 after the first win of the day
There is an option:
“R Result: Stop After First Win Each Day”
When enabled, the 𝗥 score stops adding trades for that day after the first win.
Discipline warning: If you already got one winning trade today, seriously consider stopping. The goal is not to trade more—it’s to protect consistency.
Sri - Bollinger Bands (Custom TF) Sri – Bollinger Bands (Custom Timeframe) is an enhanced Bollinger Bands indicator designed to provide higher-timeframe volatility structure directly on a lower-timeframe chart.
Instead of calculating bands on the chart’s native timeframe, this script allows traders to select an independent custom timeframe (CTF) for Bollinger Band computation, enabling clearer trend context, noise reduction, and multi-timeframe confluence.
This is not a visual mashup. The indicator uses true higher-timeframe statistical calculations via request.security(), ensuring that the basis, deviation, and bands are mathematically derived from the selected timeframe candles, not approximated or resampled.
🔍 How It Works (Conceptual Explanation)
Custom Timeframe Logic
Bollinger Bands are calculated entirely on the user-selected timeframe (e.g., 1H, 4H, Daily), regardless of the chart timeframe.
This allows traders on 5-min or 15-min charts to trade within higher-timeframe volatility envelopes.
Flexible Moving Average Basis
The middle band (basis) supports multiple MA types:
SMA
EMA
SMMA (RMA)
WMA
VWMA
This flexibility lets traders adapt the band behavior to trend-following, mean-reversion, or volume-weighted strategies.
Standard Deviation Envelope
Upper and lower bands are derived using true standard deviation from the selected timeframe’s price data.
The multiplier is user-controlled, allowing tighter or wider volatility envelopes.
Overlay-Friendly Design
Bands are plotted directly on price with optional offset support.
A soft background fill visually highlights the volatility zone without obscuring candles.
🧠 Why This Indicator Is Useful
Eliminates the need to switch charts to view higher-timeframe Bollinger Bands
Helps identify:
HTF support & resistance zones
Volatility expansion and contraction
Mean-reversion opportunities inside HTF structure
Especially effective for:
Intraday traders trading in the direction of HTF bands
Scalpers using HTF volatility boundaries as dynamic targets
Swing traders aligning entries with higher-timeframe compression or breakout zones
⚙️ Inputs Explained
Custom Timeframe – Timeframe used for Bollinger Band calculation
Length – Lookback period for MA and standard deviation
Basis MA Type – Choice of moving average for the middle band
Source – Price source (Close, HL2, etc.)
StdDev Multiplier – Controls band width
Offset – Visual displacement only (does not affect calculations)
📈 Example Use Cases
Trade 5-minute breakouts when price expands beyond the 1-hour upper band
Look for mean-reversion setups when price stretches outside daily Bollinger Bands
Combine with volume, VWAP, or trend filters for confirmation
🛡️ Notes
This script focuses on clarity and structure, not signal repainting or alerts.
Calculations are transparent and consistent with standard Bollinger Band methodology, enhanced through multi-timeframe statistical integrity.
Renko Velocity Meter [Chris Chapman]Here is the comprehensive copy for your Renko Velocity Meter indicator. This is structured to be used in a TradingView description, a manual, or a product listing.
Renko Velocity Meter
What is this Indicator?
The Renko Velocity Meter is a specialized momentum dashboard designed strictly for Renko Charts. Unlike standard oscillators (like RSI or MACD) which often fail on Renko due to the lack of time-based data, this tool uses "Brick Physics" to measure the actual speed and efficiency of price movement.
It answers the most critical question in Renko trading: "Is this a real trend, or just a choppy consolidation?"
Instead of giving you lagging signals, it provides a real-time Velocity Score (0-100) displayed on a dashboard directly on your chart. It automatically filters out "fake" moves and highlights high-probability "TURBO" conditions when the market enters a powerful extension phase.
How It Is Calculated
The Velocity Score is derived from a proprietary blend of three distinct mathematical checks:
1. Trend Efficiency ("The Snake Logic") The script calculates the ratio between the Net Price Move and the Total Distance Traveled over a lookback period.
High Efficiency: Price is moving in a straight line (Strong Trend).
Low Efficiency: Price is winding back and forth (Chop/Range).
2. Momentum Deviation (Auto-Brick Detection) The indicator automatically detects your specific Renko brick size (whether 2 pips, 10 points, or custom) without manual input. It then measures how many "Bricks" the price has pulled away from the baseline Moving Average.
If price is 6+ bricks away from the average, it signals a high-momentum extension.
3. HTF Trend Lock (Multi-Timeframe Filter) It internally checks a Higher Timeframe (default: 15-minute) to ensure you are trading with the dominant trend.
HTF LOCK: The Renko trend and the 15m trend are aligned (Green).
HTF MIX: The trends are conflicting. The score is automatically capped at 60 to prevent false signals.
4. The "Counter-Trend" Penalty To prevent buying tops or selling bottoms, the script instantly penalizes the score if a "Retracement Brick" forms.
Example: If the trend is UP, but a RED brick forms, the score is forced down to the "Yellow/Neutral" zone until the trend resumes.
Requirements
To use this indicator effectively, you must meet the following chart conditions:
Chart Type: Renko (This is mandatory. The math relies on fixed-size bricks).
Timeframe: Works on all timeframes, but optimized for standard scalping setups (e.g., 2-pip fixed bricks on EURUSD/Gold).
Data Feed: High-quality data is recommended. For maximum precision, use a 1-second (1s) interval setting for your Renko box generation if your TradingView plan allows it.
The Inputs (Settings)
You can customize the sensitivity of the meter to fit your specific asset class:
Trend Efficiency Period (Default: 14):
The number of bricks used to calculate how "straight" the trend is. Lower numbers make the score faster; higher numbers make it smoother.
Momentum Baseline (Default: 20):
The length of the internal Moving Average used as the "mean" price.
Max Momentum in Bricks (Default: 6):
How many bricks of extension are required to hit a "100% Score"? Increase this for volatile assets like Gold or Bitcoin.
HTF Support (Default: 15):
The Higher Timeframe used for the Trend Lock filter.
Meter Position:
Choose where the dashboard appears on your screen (Top Right, Bottom Left, etc.).
Dashboard Legend
GREEN (Score > 70): TURBO – Strong trend alignment. High probability of continuation.
YELLOW (Score 50-70): TREND – Active trend, but potentially stalling or retracing.
RED (Score < 50): CHOP – No clear direction or conflicting signals. Stay flat.
POSITION: Shows the current logic state (LONG/SHORT/FLAT).
Week Levels (OHLC, Settlement, CE) [Tradeisto]Weekly Levels (Tradeisto) is a sophisticated tool designed to bring institutional-grade weekly analysis to your chart. It goes beyond simple horizontal lines by combining authoritative Settlement data with pixel-perfect origination times, ensuring your levels are both accurate and contextually precise.
Key Features
Dual Precision Technology:
Price Accuracy: Uses the authoritative Weekly timeframe to capture Settlement
prices,
ensuring your levels match official exchange data (critical for Futures).
Visual Precision: Uses 15-minute timeframe data to pinpoint the exact origination
time of the High and Low. Your lines start exactly when the level was created, not just at the
"start of the week".
Dynamic Current Week:
Live Updates: Watch the "Current Week" Open, High, Low, and CE (50%) develop in
real-time.
Auto-Rename: When the trading week closes (e.g., Friday Settlement), the "Current"
labels automatically switch to "Week Open/High/Low" labels, seamlessly transitioning into
history.
Smart Labeling:
"Prev." Prefix: Automatically distinguishes the immediate previous week (labeled
"Prev.") from older history (labeled "Week").
Settlement Awareness: Automatically labels the Close as "Settlement" for Futures
contracts when enabled, and "Close" for other assets.
Historical Reference: Configurable "Weeks to Show" allows you to keep a clean chart or dig deep into past market structure.
Settings
Settlement as Close: Toggle this to prioritize the Settlement price for the Weekly Close (Standard for Futures analysis).
Weeks to Show: Control how much history remains on your chart.
Current Week Visibility: Toggle individual components for the developing week (Open, High, Low, CE).
Tradeisto delivers a professional, clean, and highly accurate weekly framework for serious market analysis.
[SKU] COT Index - Signal StrategyBrief description:
A professional, invite-only indicator for the weekly chart that combines commercial sentiment (COT data) with price action to generate precise entry and exit signals.
Description (long text):
This indicator is the result of a customized development designed to make optimal use of the CFTC's Commitments of Traders (COT) data. It is aimed at traders who want to work based on the positioning of "big money" (commercials).
Important functions & logic:
COT Index Extreme Zones: Generates signals only when the Commercial Index (26 weeks) reaches extreme values above 75 (bullish) or below 25 (bearish).
Price Action Confirmation: The signal is only triggered when the weekly candle closes in the expected direction (positive candle for long, negative candle for short).
Exact 5-week validity: An active signal runs for exactly 5 weeks (signal candle + 4 subsequent weeks), visualized by a background marking.
Clean chart display: Use labels and boxes to keep the chart free of plotting errors and to scale the Y-axis cleanly.
Note on use:
Only use this script in the weekly (W) chart for futures symbols (e.g., GC1!, CL1!, EURUSD). The COT data is synchronized automatically.
Breakout LegendThis indicator identifies price consolidation zones (“squeeze” areas) and highlights potential breakouts with visually striking candlestick colors and directional arrows. Unlike conventional Bollinger Band or Donchian Breakout tools, this system incorporates probabilistic analysis to estimate the likelihood of breakout success.
Key Features:
Squeeze Detection: Consolidation areas are marked with semi-transparent boxes, giving a clear visual of price compression.
Breakout Highlighting: Breakout bars are colored bright green (up) or red (down) with directional arrows, making trend shifts immediately visible.
Probability Assessment (internal): Behind the scenes, the system evaluates past signals using RSI and ADX-based criteria to estimate how likely a breakout is to occur. This probabilistic approach allows the system to gauge potential strength and avoid false signals common in traditional methods.
Trend Quality Filtering: Optional filters based on ADX and volume help distinguish stronger breakout chances from weaker ones.
Why It’s Different:
Unlike standard squeeze indicators, this system does not only react to the current breakout. It analyzes historical consolidation zones and internal signal patterns to provide a probabilistic measure of breakout potential.
It considers both momentum (RSI) and trend strength (ADX) simultaneously, integrating them into an internal probability model to maximize the chance of catching meaningful moves.
Visuals (candlestick coloring, arrows, boxes) are designed for intuitive understanding without revealing the proprietary calculations behind the probability model.
Usage Note:
The indicator is designed for educational and analytical purposes; it highlights potential breakout areas but does not provide guaranteed trade signals. Users should combine it with their own risk management and market analysis.
Open Interest Spaghetti - Multi ExchangeOpen Interest Spaghetti – Multi Exchange is a structural open-interest flow visualizer designed to expose where and when derivatives positioning is being built or unwound across major futures venues — without collapsing that information into a single, opaque aggregate line.
Instead of smoothing, normalizing, or trend-filtering open interest, this script intentionally preserves exchange-level granularity and plots each venue’s cumulative OI delta from a shared anchor point. The result is a “spaghetti” structure: multiple independent OI paths evolving in parallel, revealing divergence, dominance, and regime shifts in real time.
Core Idea and Originality
Most OI indicators do one of three things:
1) Plot raw open interest (slow, hard to interpret),
2) Plot OI change per bar (noisy, context-less),
3) Aggregate all exchanges into one line (information loss).
This script does none of those.
Instead, it implements an anchored cumulative delta framework applied individually to each exchange, using a common reset reference. This preserves path dependency — you see how positioning evolved since a known structural point, not just what happened on the last candle.
Key differentiators:
- Exchange-segmented OI accumulation
- Explicit anchor-based reset logic
- Optional normalization into percent-of-total OI
- No smoothing, no averages, no trend assumptions
This is not a trend indicator. It is a positioning flow map.
Data Construction and Normalization
Multi-Contract Aggregation (per exchange)
Each exchange’s total open interest is constructed by summing all available perpetual contracts:
- USD-margined
- USDT-margined
- USDC-margined
Where necessary, contract units are converted into a common base-coin representation so that all venues are directly comparable. This prevents distortions caused by mixed margin types.
The result is a true total OI per exchange, not a single contract proxy.
Anchored Cumulative Delta Logic
Let:
- OI(t) = total open interest at time t for a given exchange
- ΔOI(t)=OI(t) - OI(t-1)
For each bar:
- The script accumulates ΔOI forward in time
- This accumulation resets to zero whenever the anchor period changes
The anchor period is user-defined (default: Daily). At each reset:
- All exchange accumulators are cleared
- The current combined OI across all enabled exchanges is stored as the normalization baseline
This makes every plotted value interpretable as:
“Net positioning added or removed since the last anchor reset.”
Display Modes
1. Actual Change (default)
Plots the absolute net change in open interest since the anchor reset.
Interpretation:
- Large positive values → sustained position building
- Large negative values → sustained position unwinding
- Divergence between exchanges → uneven participation or venue-specific positioning
This mode preserves raw scale and is best for structural analysis.
2. Percent Change (normalized mode)
Each exchange’s cumulative delta is divided by the total combined OI at the anchor reset, then expressed as a percentage.
Percent Change = (Exchange Cumulative OI Delta / Total OI at Anchor) * 100
Interpretation:
- Removes absolute size bias between large and small exchanges
- Allows direct comparison of relative contribution
- Makes regime shifts easier to spot across different assets
This mode answers:
“Which exchange is driving the majority of positioning change relative to the market’s size?”
Visual and Structural Aids
- Zero baseline represents the anchor reset point
- Vertical dashed lines mark anchor transitions
- End-of-chart labels identify each exchange without relying on a legend
- All plots are unsmoothed and unfiltered by design
Noise is not removed — it is contextualized.
How Traders Use This
This indicator is most effective for:
- Detecting exchange-specific accumulation or distribution
- Identifying hidden divergence beneath price
- Confirming whether price moves are supported by broad positioning or isolated leverage
- Comparing how different venues react to the same market event
Typical interpretations:
- Price rising while OI spaghetti diverges → short covering or uneven leverage
- One exchange leading OI expansion → localized risk concentration
- Flat price with rising OI across venues → compression and potential expansion setup
What This Is Not
- Not a trend detector
- Not a momentum oscillator
- Not a signal generator
It provides structural context, not trade entries.
Summary
Open Interest Spaghetti – Multi Exchange is a flow-first, structure-aware OI framework that exposes how derivatives positioning evolves across venues from a shared reference point. By preserving exchange independence, anchoring accumulation, and offering optional normalization, it reveals information that aggregate or smoothed OI indicators inherently destroy.
If you trade derivatives and care where risk is building — not just that it is — this tool is designed for that exact purpose.
Risk Reward Table Only UYRisk–Reward Template (UY) — How to Read & Use It
This tool is designed to make position risk and reward fully transparent before you trade.
What You Enter (Inputs)
Account Size ($)
Your total trading capital.
Account Invested ($)
How much capital you are allocating to this position before leverage.
Entry and Exit Prices
How to Use This Tool Properly
If Total Risk % feels uncomfortable, the trade is oversized.
If Stop % is large, If Gain doesn’t justify Risk, skip the trade.
If Leverage inflates risk too much, reduce size
eXquTrading FIB (Auto)eXquTrading FIB (Auto) — EMA144/169 Cloud + 8X Score + Auto Fibonacci (Single Set)
This indicator uses the EMA144/169 Cloud to define the market regime (LONG/SHORT/NEUTRAL), then generates BUY/SELL signals based on an 8-factor scoring system, while automatically drawing one Fibonacci set and extending it to the right so labels remain readable.
Features
Trend Regime (EMA144/169 Cloud):
Above cloud = LONG, below cloud = SHORT, inside cloud = NEUTRAL
8X Score Signals: confirmations from RSI, MACD, Stoch, Momentum, Volume, MFI, CCI, OBV(EMA)
Noise-reduction filters:
ATR-based cloud distance filter (reduces chasing signals)
ATR-based impulse candle filter (blocks oversized candles)
Cooldown (limits back-to-back signals)
Auto Fibonacci (Single Set):
Rebuilds on trend flip / fib invalidation / (optional) when a signal appears and no fib exists
Levels: -1.618, -1, -0.382, 0, 0.382, 0.5, 0.618, 1
Fib lines extend to the right on every bar (labels stay clean)
Settings (Quick tips)
Increase Minimum Confirmations (Score) → fewer but cleaner signals
Tighten ATR filters in choppy markets, loosen slightly in strong trends
Increase Right Pad Bars to keep right-side labels readable
Repaint / Execution Mode
Default: bar close only (more reliable)
Optional “Early Signal (Repaint Risk)” enables intrabar signals (faster, but may repaint)
Alerts
8X SCALP BUY
8X SCALP SELL
Disclaimer
For analysis/educational purposes only. Not financial advice. Always test settings on your own symbols and timeframes.
Timbuktu V - Next Candle ProbabilityThis indicator calculates the probability that the next candle
will be bullish or bearish by integrating multiple technical
and market flow factors:
• Trend (EMA + ADX)
• Relative volume
•Order Flow (proxy)
• Accumulated pressure
• Detection of FVG (Fair Value Gaps)
The result is presented as a probabilistic bias in real time,
with clear visualization on the chart:
• Green/red arrows for FVG
• Bullish and bearish probability lines
• Background shading according to the dominant bias
• Label on the last bar with percentages and total score
This script does not generate direct buy/sell signals,
but provides a quantitative reading of market bias,
useful as an additional filter to confirm setups,
evaluate entries, and strengthen risk management.
Configurable and flexible, it adapts to different assets
and trading styles.
Elite Elliott Wave - Auto Fibonacci Smart Mode: Automatically selects optimal levels
📊 Adaptive: Adjusts based on wave characteristics
🎯 Intelligent: Shows extensions only when Wave 3 is extended
💪 Accurate: Elliott Wave validation with confidence scores
EduVest - IFA-VP Context v3.0 [NEON Edition]📊 IFA-VP Context v3.0
A powerful market context indicator combining Volume Profile analysis with SMA trend detection. Designed with a cyberpunk-inspired NEON color palette for maximum visibility on dark charts.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🎯 WHAT IT DOES
This indicator helps you understand "where you are" in the market by analyzing:
• Volume Profile (POC, VAH, VAL)
• SMA Alignment (20/50/200)
• Context Score (0-100)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
⚡ KEY FEATURES
🔹 NEON Color Palette - Cyan/Pink/Gold colors optimized for dark mode
🔹 Context Score - Visual score bar (████████░░) shows market strength
🔹 Cross Signals - GOLDEN CROSS / DEATH CROSS with HUGE labels
🔹 POC Reaction - Track price interaction with Point of Control
🔹 Status Panel - All-in-one dashboard with trend, zone, and hints
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
📺 THREE DISPLAY MODES
• Impact Mode - Full visual experience with badges, ribbons, and glow effects
• Minimal Mode - Clean SMA lines and VP levels only
• Pro Mode - Complete VP histogram display
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
📈 SIGNALS EXPLAINED
▲ GOLDEN CROSS (20×50) - Short-term bullish momentum
▼ DEATH CROSS (20×50) - Short-term bearish momentum
⭐ MAJOR GOLDEN (50×200) - Long-term bull market signal
💥 MAJOR DEATH (50×200) - Long-term bear market signal
Context Badges:
⚡ SUPER BUY/SELL (Score 80+)
🔥 POWER BUY/SELL (Score 70-79)
💪 STRONG BUY/SELL (Score 60-69)
⏸ WAIT (Score <50)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
⏰ RECOMMENDED TIMEFRAMES
✅ 15min - 4H (Best for day trading & swing)
⚠️ 1min-5min (Noisy, use with caution)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
⚠️ DISCLAIMER
This is NOT a buy/sell signal indicator.
It shows market CONTEXT to help your own trading decisions.
Always use proper risk management and combine with your own analysis.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🏷️ Tags: volume profile, sma, context, trend, neon, dark mode, poc, value area
