Регистрация

Индикаторы и стратегии

Livermore 5-Step Trade Dashboard [t2make]█ OVERVIEW Jesse Livermore — arguably the greatest stock trader of the 20th century — never entered a trade on impulse. In "How to Trade in Stocks" (1940), he outlined a disciplined, top-down checklist that filtered out noise and kept him on the right side of the market. This indicator translates Livermore's 5-step pre-trade test into a real-time, on-chart dashboard that automatically evaluates both LONG and SHORT setups simultaneously and tells you which direction has the stronger case — or tells you to sit on your hands. No manual switching. No guessing. The market speaks, and the dashboard listens. █ THE 5 STEPS ① MARKET TREND — "There is a time to go long, a time to go short, and a time to go fishing." Compares fast/slow EMAs on your chosen market index (default: SPY). If the general market isn't trending in a clear direction, there's no trade. Period. ② SECTOR TREND — "Stocks move in groups. You must know which group your stock belongs to." Checks whether the sector ETF (XLK, XLF, XLE, etc.) is confirming the broader trend. Livermore never fought the group. ③ STOCK ACTION — "The stock must be acting right." The individual stock must be trending (EMA alignment) AND showing above-average volume. Trend without conviction is just drift. ④ PIVOTAL TIMING — "The pivotal point is where the money is made." Price must be at or near a pivot high (for longs) or pivot low (for shorts), confirmed by RSI momentum. This is Livermore's famous "line of least resistance" — enter only when the stock is ready to move. ⑤ RISK MANAGEMENT — "Always define your risk before entering a trade." ATR-based stop-loss, position risk as a percentage, and minimum reward-to-risk ratio. If the math doesn't work, the trade doesn't happen. █ AUTO DIRECTION This is the key differentiator. The script scores all 5 steps for both Long AND Short independently, then: • The side with more passing steps wins • If tied, the side aligned with the market trend (Step 1) takes priority • If neither side scores, the dashboard shows "— NONE" — stay flat The bottom row always displays both scores side by side (e.g., ▲ L 4/5 vs ▼ S 1/5) so you can see the full picture at a glance. █ DASHBOARD SIGNALS ✅ GO TRADE — 5/5 steps pass. This is your green light. ⚠ ALMOST — 4/5 steps pass. One condition away — watch closely. ⏳ WATCH — 3/5 steps pass. Setup is forming but not ready. 🚫 NO TRADE — Below 3/5. Stay out. On-chart markers: 🟢 Green ▲ below bar = Long 5/5 triggered 🔴 Red ▼ above bar = Short 5/5 triggered 🟡 Yellow ◆ = 4/5 (almost ready) Subtle background tint when all 5 pass █ HOW TO USE 1. Add the indicator to any stock or ETF chart 2. In settings, set your Market Index (SPY, QQQ, etc.) and Sector ETF to match your stock's sector 3. The dashboard does the rest — auto-detects direction and scores each step 4. Only trade when you see 5/5 PASS 5. Use the calculated Stop and Target levels as starting points for your trade plan 6. Set alerts for 5/5 and 4/5 triggers to get notified across your watchlist Sector ETF reference: XLK (Tech), XLF (Financials), XLE (Energy), XLV (Healthcare), XLI (Industrials), XLP (Consumer Staples), XLU (Utilities), XLB (Materials), XLRE (Real Estate), XLC (Communications), XLY (Consumer Discretionary) █ SETTINGS Dashboard: Position (4 corners), Size (S/M/L), toggle EMAs and levels on/off Step 1: Market symbol, fast/slow EMA periods Step 2: Sector ETF symbol, EMA period Step 3: Stock fast/slow EMA, volume surge multiplier, volume avg period Step 4: Pivot lookback, RSI toggle, RSI period and OB/OS thresholds Step 5: Max risk %, min R:R ratio, ATR period and multiplier █ LIMITATIONS • This is a checklist tool, not a signal generator — it tells you WHEN conditions align, not WHERE to enter tick-by-tick • Works best on daily timeframe with stocks and ETFs that have reliable volume data • Sector ETF must be set manually to match the stock you're analyzing • Crypto and forex pairs may need adjusted parameters since they lack traditional sector groupings • Past alignment of all 5 steps does not guarantee future results █ NOTES This indicator is inspired by Livermore's principles but is an interpretation, not a literal recreation. Livermore traded in an era before EMAs and RSI existed — he used price action and tape reading. The underlying logic, however, is the same: confirm the market, confirm the group, confirm the stock, wait for the pivot, and define your risk. "It was never my thinking that made the big money for me. It always was my sitting." — Jesse Livermore Follow @t2make on X for updates, new indicators, and trade ideas.
Индикатор Pine Script®
от t2smake
Aroon🎯Overview Aroon → is a beautifully visualized trend detection indicator that measures the strength and direction of market trends using the Aroon oscillator. It provides clear signals for identifying trend beginnings, strength, and potential reversals. Key Features 📊 Dual Component Analysis Aroon Up: Measures time since highest high within the specified period Aroon Down: Measures time since lowest low within the specified period Aroon Average: The difference between Aroon Up and Aroon Down (oscillator) 🎨 Customizable Visualization 5 Color Themes: Choose from Classic, Modern, Robust, Accented, or Monochrome Visual Fill Areas: Color-coded overbought/oversold zones Clear Labels: Direct labeling of both Aroon lines for easy reading 📈 Trend Detection System Cross Signals: Bullish when Aroon Up crosses above Aroon Down Bearish Signals: Bearish when Aroon Up crosses below Aroon Down Trend Strength: The spread between lines indicates trend strength How It Works Indicator Logic Aroon Up = × 100 Aroon Down = × 100 Aroon Average = Aroon Up - Aroon Down (oscillator between -100 and +100) Trend Signals: Generated when the two lines cross Interpretation Guidelines Strong Uptrend: Aroon Up near 100, Aroon Down near 0 Strong Downtrend: Aroon Down near 100, Aroon Up near 0 Consolidation: Both lines moving together below 50 Trend Beginning: Lines diverging after being close together Trend Reversal: Lines crossing each other Display Options Visual Components Aroon Lines (optional): Show individual Up/Down lines Aroon Average (optional): Show the oscillator with fill zones Background Highlights: Color background on crossover signals Summary Table: Large text showing current trend direction Color Themes Classic: Green/Red (traditional) Modern: Teal/Purple (contemporary) Robust: Gold/Burgundy (bold) Accented: Purple/Pink (vibrant) Monochrome: Gray/Charcoal (subdued) Trading Applications Entry Signals Long Entry: Aroon Up crosses above Aroon Down Short Entry: Aroon Up crosses below Aroon Down Trend Confirmation: Use with price action for validation Trend Analysis Trend Strength: Distance between lines indicates momentum Trend Maturity: Line levels show how old the trend is Range Identification: Both lines low indicates consolidation Customization Settings Aroon Configuration Length: Default 6 periods (adjustable) Show Lines: Toggle Aroon Up/Down lines Show Average: Toggle Aroon oscillator display Color Theme: Choose from 5 visual styles Alert System Cross Alerts: Notifications for bullish/bearish crossovers Custom Messages: Includes ticker symbol in alert messages Benefits for Traders 📊 Clear Trend Identification Visual representation of trend strength and direction Easy-to-spot crossovers for potential entries Multiple display options for different trading styles 🎯 Versatile Application Works on all timeframes Suitable for all markets (stocks, forex, crypto) Can be combined with other indicators for confirmation ⚡ Practical Features Real-time alerts for crossovers Clean, uncluttered visualization Customizable to match your chart aesthetics Large trend direction display for quick assessment Perfect for trend-following traders who want a clear, visual indicator that identifies both trend direction and strength without complex calculations. The Aroon indicator is particularly effective at spotting new trends early and identifying when trends are weakening or reversing.
Индикатор Pine Script®
от Tiagorocha1989
Quanticorn - Manual Pro - ForexQUANTICORN | Manual Pro | FOREX edition - Price Inefficiency Detection The official quantitative model for FX Futures. Identify institutional liquidity inefficiencies and high-probability trade setups in real-time. WHAT IT DOES • Detects price inefficiencies on 15min charts • Displays real-time entry, partial exit, and full exit labels directly on your chart • Shows a live Trade Setup Table with entry price, stop-loss, partial TP, full TP, direction, contracts, and risk in USD • Includes a Backtest Stats Table showing recent performance of current p-settings (trades, PnL, win rate, max drawdown, streaks) • Latest parameter p-settings available via Discord BACKTESTED PERFORMANCE Based on the same locked zero-lookahead logic used in our institutional alpha: • NQ 2023-25: 228% CAGR, 2.3 Sharpe • NQ 2020-21 (COVID): 139% CAGR, 1.61 Sharpe • NQ 2008-09 (GFC): 17.2% CAGR, stress-tested • BTCUSDT 2023-25: 37.2% CAGR, 0.6 Sharpe SUPPORTED TIMEFRAMES Currently Optimized for: 15min on 6E1! and 6B1!. Can be used on other timeframes and FOREX markets, but signals are curently calibrated for the above only. CUSTOMIZATION Fine-tune the indicator with adjustable inputs: • P1–P7: Core model parameters (latest presets available in Discord) • Target R: Set your custom risk-reward targets • Partial Settings: Customize your partial exit levels • Risk Per Trade: Define your risk in USD – the indicator automatically calculates contract size COMMUNITY & SUPPORT • Access the official Discord for latest p-settings and support • Real-time updates and parameter tuning guidance • Direct access to the Quanticorn team DISCLAIMER This indicator is for educational purposes. Past performance does not guarantee future results. Trading futures involves substantial risk. Only risk capital you can afford to lose. Key Features ✓ Real-time price inefficiency detection ✓ Entry, partial exit, and full exit labels with tooltips ✓ Live Trade Setup Table (entry, SL, TP, contracts, risk in USD) ✓ Live Backtest Stats Table (trades, PnL, win rate, max DD, streaks) ✓ Automatic contract size calculation based on your risk ✓ Optimized for 15min charts ✓ Supports 6E1! and 6B1! futures ✓ Based on institutional zero-lookahead backtests ✓ Discord community & official p-settings Usage Instructions 1. Add the indicator to your chart (6E1!/6B1! 15min) 2. Set your risk per trade in USD – the indicator will calculate contract size automatically 3. Use the latest p-settings from Discord for optimal performance (parameters are customizable but presets are recommended) 4. Watch for colored labels on the chart (backtest): - Yellow = Potential setup detected (in live trading check Trade Setup Table) - Green = Entry triggered - Blue = Partial profit reached - Orange = Breakeven exit (stop moved to entry after partial) - Red = Full stop-loss hit (-1R) - Dark Green = Full target reached 5. Reference the Trade Setup Table for exact entry, stop-loss, and profit targets 6. Monitor the Backtest Stats Table to see how current p-settings have performed recently CONTACT & SUPPORT Email: indicator@quanticorn.com Discord: discord.gg/Aes2w8qQTt Website: quanticorn.com/indicator
Индикатор Pine Script®
от Quanticorn
DCA Gold BenchmarkOverview The DCA Gold Benchmark indicator provides a relative valuation tool for assessing an asset's price (such as stocks, cryptocurrencies, commodities, bonds, or forex pairs) against gold priced in the chart's quote currency, treating gold as a reference for value preservation. It derives a benchmark from the asset's historical relationship to gold across supported currencies, then scales it to overlay on the price chart for visual comparison to gold-implied fair value. Deviations from this benchmark are emphasized. An envelope, based on historical variability, surrounds the benchmark line to suggest potential overvaluation (price above upper envelope, consider sell) or undervaluation (price below lower envelope, consider buy). Supported quote currencies: USD (XAUUSD), AUD (XAUAUD), EUR (XAUEUR), GBP (XAUGBP), JPY (XAUJPY), CAD (XAUCAD). For unsupported currencies or assets, it defaults to USD gold pricing. How It Works Gold Price Fetch : The indicator automatically detects the chart's quote currency and fetches the corresponding gold price symbol. If unsupported, it falls back to XAUUSD. Asset in Gold Terms: Computes the asset's value relative to gold. Benchmark Calculation : Derives a smoothed benchmark from the asset-in-gold relationship over the lookback period, then scales it for overlay on the price chart. Envelopes: Forms upper and lower bands based on variability in the asset-in-gold data around the benchmark. Deviation Metrics: Computes raw deviation, percentage deviation, and normalized deviation for display in the table. Note: Gold data may have daily resolution, potentially causing slight lag on intraday charts. All calculations use built-in TradingView functions for transparency. Inputs Lookback Period (default: 200): The length for the smoothed benchmark and standard deviation calculations. Longer periods smooth the benchmark for long-term analysis; shorter ones increase sensitivity for trading. Deviation Multiplier for Envelope (default: 1.5): Adjusts the width of the upper/lower envelopes. Higher values widen the bands for fewer signals; lower values tighten them for more frequent touches. Interpretation Benchmark Line (Yellow): Represents the asset's "fair value" based on its historical relationship to gold. Price above suggests potential overvaluation vs. gold; below indicates undervaluation. Upper Envelope (Green): Potential resistance level; price touching or exceeding may signal overextension. Lower Envelope (Red): Potential support level; price dropping to or below may indicate buying opportunities. Envelope Fill (Blue): Visual range highlighting the benchmark channel. Table Metrics (Top-Right):Benchmark: Current scaled fair value. Asset in Gold: Asset's value in ounces of gold. Price Deviation: Raw and percentage difference from benchmark (green for positive, red for negative). Norm Deviation: Standardized deviation (z-score-like); values >1 or <-1 may indicate extremes for mean-reversion trades. Explanation : Quick guide to signals. Positive deviations might suggest selling or hedging; negative ones could favor accumulation, especially in DCA strategies. Always confirm with volume, trends, or fundamentals. Usage Examples Stocks/ETFs: Apply to SPY or individual stocks to gauge inflation-adjusted value vs. gold during economic uncertainty. Cryptocurrencies: On BTCUSD or ETHUSD, identify periods where crypto is "cheap" vs. gold for long-term holds. Forex/Commodities: For pairs like EURUSD, it highlights currency strength relative to gold; for oil (CL1!), assess energy vs. precious metals. Timeframes: Best on daily+ for reliability; intraday may show more noise due to gold data. Combine with other indicators (e.g., RSI for momentum) for a better context. Backtest on historical data to evaluate performance in your strategy. Limitations Relies on gold as a stable benchmark, which may not hold in all markets (gold can be volatile due to supply/demand or speculation). Assumes currency detection accuracy; non-supported currencies default to USD, potentially skewing international assets. Not a predictive tool—deviations can persist in strong trends. No guarantees of accuracy or profitability; use at your own risk. Data availability: Gold symbols may vary by broker; test on your setup. This is for informational purposes; combine with other analysis and do not use as sole trading advice. Tested on: BTCUSD (with USD gold), S&P 500 (SPX or SPY), Nasdaq (NDX or QQQ), Dow Jones (DJI), a variety of stocks (e.g., AAPL, NVDA, TSLA), and forex pairs (e.g., EURUSD with EUR gold, USDJPY with JPY gold) - handles various asset types automatically.
Индикатор Pine Script®
от DCAChampion
Reference TimesOverlay indicator that highlights historical candles at a chosen weekday and time. Shows upper and lower wicks as boxes (discounts/premiums), with optional opposite day/hour, previous day, and dynamic or fixed time. Supports multiple timeframes and timezones. Reference Times marks every candle that matches a specific weekday, hour, and minute over your lookback period. It draws boxes on the wicks of those candles—green on upper wicks (discounts) and red on lower wicks (premiums)—so you can quickly see where price has reacted at that same time in the past. Time mode Fixed: You choose the day of week, hour, and minute to inspect (e.g. Wednesday 15:34). The indicator highlights all matching candles in that timeframe. Dynamic: You set a “minutes offset” from the current bar. The reference time is computed as current time + offset (e.g. “30 minutes ahead”). Positive = ahead, negative = back. Useful for scanning a rolling reference time without changing inputs. Days Standard days: Highlights only the selected weekday (e.g. every Wednesday at 15:00 on 30m). Opposite days: Also marks the “opposite” weekday: Monday↔Wednesday, Tuesday↔Thursday. Friday/Saturday/Sunday have no opposite. Previous day: Marks the most recent occurrence of the weekday before the selected day (e.g. if you select Wednesday, it marks the latest Tuesday; if you select Friday, it marks the latest Monday). Hours Standard hours: Highlights the exact time you chose (aligned to the chart’s candle boundaries, e.g. 15:00 on 30m, 14:30 on 90m when day starts at 01:00). Opposite hours: 12-hour offset (e.g. 15:00 ↔ 03:00). Options: Off, On (all matching opposite-hour candles), or Once (only the most recent opposite-hour bar on the selected weekday). Visuals and filtering Hide upper discounts and lower premiums: Hides upper wicks above current price and lower wicks below current price, so you only see levels that are relevant to where price is now. Nearest highlights only: Restricts highlights to a percentage range around current price (e.g. ±0.7%). You only see wicks within that band. Labels: Optional weekday (e.g. “We”), date (e.g. “03/10”), and time (e.g. “15:00”). You can show any combination or none. Sticky labels: Labels can stay on the right side of the chart and move with new bars so the most recent references stay visible. General Timezone offset: Converts between chart time (e.g. Chicago) and your time (e.g. Israel UTC+3). Example: +8 hours for Jerusalem vs Chicago. Lookback days: How many days back to search (e.g. 365). Limited by TradingView’s ~10,000-bar history for small timeframes. Instance label: Optional label (A, B, C, D) in the status line when you run several instances with different settings. Timeframes Works on any chart timeframe. The script aligns to the candle that contains your chosen time (trading day 01:00–24:00 in your timezone). Supported logic includes 30m, 90m, 6h, and daily. Alerts Built-in alerts for when historical wicks are found and when there are many upper or lower wicks (e.g. potential resistance/support).
Индикатор Pine Script®
от deepkfiz
Accordion Index (Swing-Based) Structural Market Regime AnalysisThe Accordion Index is a multi-dimensional market structure indicator designed to diagnose regime formation, expansion, compression, and transition phases across financial markets. Rather than generating isolated buy/sell signals, it provides contextual insight into how price, structure, and participation interact over time. The indicator is based on a swing-based, multi-leg framework, which reflects how markets naturally alternate between expansion, correction, re-expansion, and resolution phases. These repeating swing sequences form the foundation of both classical cycle analysis and Elliott Wave structures. By quantifying the internal quality of these swing structures, the Accordion Index evaluates whether price movements are structurally aligned, directionally efficient, and institutionally supported. Core Components The indicator consists of three complementary components: 1) Accordion Correlation (Blue Line) Structural Alignment Measures the degree of synchronization between short-term swing behavior and the dominant higher-timeframe regime. Rising values indicate increasing structural coherence. Declining values reflect regime decay and fractal misalignment. This component highlights whether market movements are organized within a broader cycle structure or fragmented across timeframes. 2) Efficiency (Green Line) Directional Progress Measures how much net directional displacement price achieves relative to its internal movement. Rising values indicate clean, trend-supportive movement. Falling values reflect consolidation, churn, or distribution. This component distinguishes productive trends from sideways or internally conflicted phases. 3) Average Swing Speed (Red Line) Participation and Energy Measures the velocity and urgency of swing movements. Rising values indicate strong institutional and speculative engagement. Declining values suggest fading participation or exhaustion. This component reflects whether major capital is actively sponsoring price movement. Regime Thresholds Two reference levels provide structural context: Directional Regime (+0.5, Blue Dashed Line) Identifies mature directional regimes with strong structural coherence, typically associated with sustained trend phases. Strong Accordion (–0.5, Purple Dashed Line) Marks extreme structural dislocation, often occurring during crisis periods, panic phases, or major regime breakdowns. Interpreting the Accordion Index The indicator should be interpreted as a regime and structure filter rather than a standalone signal generator. Typical configurations include: Rising correlation, rising efficiency, rising speed =Trend expansion and regime confirmation Rising correlation, falling efficiency, elevated speed =Compression and accumulation/distribution Falling correlation and efficiency with unstable speed =Regime decay and transition Simultaneous recovery in correlation and efficiency =Structural re-synchronization and trend re-emergence These configurations allow traders to assess whether markets are trending, consolidating, transitioning, or reorganizing internally. Market-Agnostic and Fractal Design The Accordion Index is market-agnostic and fractal in nature. It can be applied to: FX, commodities, indices, equities, and crypto Intraday, swing, and long-term timeframes The underlying swing structure exists in all sufficiently liquid markets. Differences in behavior are reflected through changes in structural coherence, efficiency, and participation rather than through pattern distortion. The indicator therefore adapts naturally to different asset classes and volatility regimes. Integration with Cycle and Wave Analysis The Accordion Index is designed to complement, not replace, existing analytical frameworks. Cycle Analysis It can be used to validate cycle phases by confirming whether internal structure supports expansion, compression, or transition scenarios. Elliott Wave Analysis The indicator aligns naturally with Elliott Wave principles by evaluating the quality of impulsive and corrective phases: Impulsive waves typically show rising correlation, efficiency, and speed. Corrective waves tend to display falling efficiency and structural fragmentation. Wave extensions and failures are often preceded by changes in internal alignment. This makes the Accordion Index a valuable supplemental tool for confirming wave counts and identifying regime exhaustion or re-synchronization. Practical Usage The Accordion Index functions best as a contextual filter: High structural alignment = trust trend structure Low efficiency = expect consolidation Low participation = avoid forcing trades Trades and projections should be executed in alignment with prevailing structural conditions rather than isolated price patterns. Disclaimer This indicator is intended for educational and analytical purposes. It does not constitute financial advice. All trading decisions remain the responsibility of the user. Closing Note The Accordion Index is designed to visualize how markets organize, exhaust, compress, and re-synchronize over time. By integrating structural alignment, directional efficiency, and participation dynamics, it provides a unified framework for understanding market regimes across asset classes and timeframes.
Индикатор Pine Script®
от AMTrader
Risk AlignmentRisk Alignment evaluates whether market conditions favor risk-on or risk-off behavior by assessing the alignment of BTC and the OTHERS index. It uses two independent signals: the direction of the 12/25 EMA stack and price position relative to those EMAs, each classified as bullish, bearish, or neutral. These signals are combined into a six-state regime framework: Bullish, Neutral-Bullish, Conflicting, Neutral-Bearish, Bearish, or No Signal This provides a clear hierarchy of conviction rather than a binary output. It is designed to function as a top-down macro filter, helping traders gate exposure, size risk, and avoid periods of structural disagreement. It is best used as a regime context layer, not as a standalone entry signal.
Индикатор Pine Script®
от Kintsugixyz
Occurrence Scanner | MA Resilience & Breakout LogicThis indicator is designed to quantify the reliability of a Moving Average (MA) as a dynamic Support or Resistance level. Unlike standard crossover indicators that generate signals on every touch, this script employs a rigorous "Zone Tolerance" and "Temporal Confirmation" logic to filter out noise and classify price action into three distinct behaviors: Valid Bounce, Confirmed Breakout, or False Breakout (Trap). It also integrates an optional Volatility Filter (based on TTM Squeeze mechanics) to prevent false signals during low-volatility "chop" regimes. HOW IT WORKS: 1. The "Safe Zone" (Buffer Logic): Standard MAs are thin lines. This script creates a programmable "Road" around the MA (defined by the Zone Tolerance % input). A touch is only considered a potential breakout if the price closes outside this zone. Wicks that pierce the MA but close inside the zone are treated as Bounces (respecting the level). 2. Event Classification (The Decision Engine): Once the price interacts with the MA Zone, a "Sovereignty Window" (Lookahead Timer) is activated to monitor the subsequent candles: ✅ Bounce: Price tests the MA but never closes outside the Safe Zone during the window. The MA held as support/resistance. ❌ Breakout (Breakdown/Breakup): Price closes outside the Safe Zone. A strict "2-Consecutive Close" logic is applied to confirm the trend change immediately, avoiding premature signals. ⚠️ False Break: Price momentarily closes outside the zone but aggressively reverses to the opposite side within the time window. This identifies "Bull/Bear Traps". 3. The Volatility Filter (Anti-Chop): Market consolidation often leads to MA whipsaws. The script calculates Bollinger Bands (2.0 std) vs. Keltner Channels (1.5 ATR). If the Squeeze Filter is enabled in settings, the script forces the scanner to IGNORE any MA touches while volatility is compressed (Squeeze ON). This ensures signals are only generated during active trends. SETTINGS: MA Type & Length: Choose between SMA or EMA and the period (e.g., 20, 50, 200). Zone Tolerance (+/- %): The buffer width. Default is 0.2%. Higher values filter more noise. Lookahead Candles: The confirmation window size. Squeeze Filter: Toggle On/Off to ignore signals during low volatility regimes. INTENDED USE: This tool is intended for Swing Traders and Scalpers looking to statistically validate which Moving Average is being respected by a specific asset. It automates the "visual backtest" process, providing a Dashboard with success rates for Bounces vs. Breaks.
Индикатор Pine Script®
от impressive_Storkj9gr3
ORION: Linear Regression Consolidation SystemDescription: This script is a custom-built technical analysis tool designed to identify high-probability consolidation zones (market equilibrium) and trade their subsequent breakouts in the direction of the established trend. originality & Concept: While many indicators use simple Bollinger Band squeezes, this system employs a multi-factor algorithm to define "Consolidation" mathematically. It synthesizes three core concepts: Volatility Compression (ATR): It compares the current range against the Average True Range (ATR) to ensure price action is compressed. Structural Stationarity (Linear Regression): It calculates the slope of the Linear Regression line over a lookback period. A zone is valid ONLY if the slope is near-zero (< 0.25), ensuring the market is truly flat and not just choppy. Trend Alignment (EMA): To filter out low-probability counter-trend signals, the system utilizes a 150-period Exponential Moving Average (EMA) as a baseline. Breakouts are only valid if they align with the macro trend (Above EMA = Long, Below EMA = Short). How It Works: Zone Detection: The script draws a visual box when the price range is within the ATR multiplier limit AND the Linear Regression slope is flat. Signal Validation: A signal is triggered only on a confirmed candle close outside the box. False Breakout Protection: A volume/body size filter checks if the breakout candle has significant momentum compared to the average of the last 20 bars. Risk Management : The script projects a fixed Risk:Reward setup (default 1:1.8) and includes a "Breakeven" logic that visualizes when a trade has reached 50% of its target, securing the position. Settings: This system is highly customizable to fit different market conditions. Below are the specific parameters used in this setup: 1. Strategy Core (Logic) Lookback Period (15): The algorithm analyzes the most recent 15 candles to detect market equilibrium. On the M5 timeframe, this represents a 75-minute window of stability, which is optimal for scalping setups. Box Width (ATR Multiplier) (3) : Defines the maximum vertical range of the consolidation box. A value of 3 means the box height cannot exceed 3x the Average True Range (ATR). This ensures we are trading tight, compressed zones rather than volatile, expansive ranges. Slope Tolerance (0.4): Controls the strictness of the Linear Regression slope. A value of 0.4 allows for a slight tilt in the consolidation structure, capturing more valid opportunities than a strictly horizontal (0.0) setting without compromising the "flatness" requirement. 2. Risk Management Risk : Reward Ratio (1.8): Sets the profit target relative to the stop loss. For every $1 risked, the system targets $1.8 in profit. This provides a positive mathematical expectancy even with a moderate win rate. Breakeven Trigger (%) (0.5): A capital preservation feature. When the price covers 50% (0.5) of the distance to the Take Profit target, the trade is visually marked as "Breakeven" (Risk-Free). If the price reverses after this point, it is not counted as a loss. 3. Protection & Filters (Insurance) Enable 'Strong Candle' Filter (ON): Filters out weak "creeping" breakouts. The system will only trigger a signal if the breakout candle demonstrates significant momentum. Average Size Period (20): The baseline for momentum is calculated using the average body size of the last 20 candles. Candle Strength Factor (1): The breakout candle must be at least 1x (100%) the size of the average candle. This ensures that real volume and momentum are backing the move, reducing the chance of fakeouts. Disclaimer: This script is intended for educational and analytical purposes to assist traders in identifying market structure.
Индикатор Pine Script®
от ana_gagua
Crypto PCA [LuxAlgo]The Crypto PCA indicator provides a sophisticated, multi-asset sentiment gauge by applying Principal Component Analysis (PCA) to a basket of the top 20 cryptocurrencies. By extracting the primary driver of variance across these assets, the tool offers a "market-wide" oscillator that filters out individual coin noise to highlight the dominant trend and sentiment shifts in the crypto space. In modern quantitative finance, PCA is used to reduce dimensionality and identify the underlying factors that move a group of assets. This indicator brings that institutional-grade approach to the retail trader, condensing the price action of Bitcoin, Ethereum, Solana, and 17 other majors into a single, actionable signal. 🔶 USAGE The script serves as a macro-sentiment oscillator, allowing traders to see the "hidden" force driving the crypto market. It is designed to identify when the market is moving in unison and when that collective movement has reached an extreme. 🔹 Identifying Market Regimes The primary use of the PCA line (PC1) is to determine the current market regime. When the oscillator is above the zero line and colored green, it indicates that the majority of the top 20 assets are experiencing positive variance, signaling a broad bullish regime. Conversely, when the line is below zero and colored red, the market is in a collective bearish state. Traders can use this to align their individual trades with the direction of the total market energy. 🔹 Using Snapshot Mode for Situational Analysis While the continuous mode is ideal for long-term trend following, the Snapshot Mode provides a focused view of market dynamics over the most recent lookback window. This mode isolates the current sentiment cycle, allowing traders to see the specific trajectory and "shape" of the latest move without the influence of older historical data. By enabling Snapshot Mode, you can analyze the immediate internal structure of the market. It is particularly useful for identifying whether a recent pump or dump is a coordinated market-wide event or a more fragmented move. This helps in distinguishing between a broad structural shift and a temporary volatility spike. 🔹 Spotting Overextended Sentiment The indicator includes dashed horizontal lines at +2 and -2, representing standard deviation thresholds. Because the assets are standardized before calculation, these levels mark statistical extremes. Overbought Extremes: When the PCA line exceeds +2, the broad market is significantly overextended to the upside. This often precedes a cooling-off period or a mean-reversion event across the entire sector. Oversold Extremes: When the PCA line drops below -2, it suggests a "panic" or exhausted selling state across the basket. This can signal potential bottoming interest or a relief rally. 🔹 Gauging Relative Strength The faint "ghost" lines in the background represent the individual standardized price paths of the 20 included assets. By comparing these to the main PCA line, traders can identify leaders and laggards. An asset line that stays consistently above the PCA line during a rally is exhibiting relative strength, while an asset trailing below the PCA line is underperforming the market average. 🔶 DETAILS The indicator follows a rigorous mathematical pipeline to ensure the data is statistically significant and comparable across assets with different price scales. 🔹 Standardization (Z-Scores) Before performing PCA, every asset must be on the same scale. The script converts the price of all 20 assets into Z-scores based on the user-defined Lookback Period. A Z-score tells us how many standard deviations a price is from its mean. This allows the movement of a high-priced asset like BTC to be mathematically compared to a lower-priced asset like PEPE. 🔹 The Basket & PCA Approximation The indicator includes the following assets: BTC, ETH, BNB, XRP, SOL, TRX, DOGE, ADA, BCH, WBTC, XLM, LTC, HBAR, LINK, AVAX, PEPE, DOT, UNI, NEAR, and ICP. The script uses a correlation-based approximation to find the First Principal Component. It calculates the correlation of each asset to the equally weighted basket and uses these correlations as "loadings" to compute the PC1. This ensures that assets moving in sync with the general market trend are given higher priority in the final oscillator value. 🔹 Why PCA? Most "Crypto Indices" are simply weighted averages. PCA is superior because it identifies the commonality between assets. If 18 coins are moving up and 2 are moving down, PCA gives more weight to the 18 moving together, as they represent the "Principal Component" of the market's current energy. 🔶 SETTINGS 🔹 Main Settings Lookback Period (N): Determines the window used for Z-score standardization and PCA calculation. A shorter period makes the indicator more reactive, while a longer period identifies macro-cycle shifts. Z-Score Smoothing: Applies a Simple Moving Average (SMA) to the standardized asset values before the PCA calculation. This effectively filters out high-frequency noise and produces a smoother principal component line, which is useful for reducing false regime shifts in volatile markets. Enable Snapshot Mode: Switches the visual output from a continuous rolling line to a static view of the PCA over the most recent lookback window. 🔹 Visual Settings Standardized Assets Color: Controls the color and transparency of the 20 individual asset lines. Bull/Bear Colors: Defines the colors used for positive and negative market sentiment. Disclaimer: This indicator is a statistical tool for sentiment analysis and does not constitute financial advice. The PCA approach measures variance and correlation, not guaranteed future direction.
Индикатор Pine Script®
от LuxAlgo
2
Point & Figure [ARTech]🔸🔸🔸 Point & Figure 🔸🔸🔸 Before jumping into the indicator settings, let’s take a step back and understand the logic behind Point & Figure charts. Unlike time-based charts, Point & Figure focuses purely on meaningful price movement . It filters out minor fluctuations and ignores time completely, helping you see market structure in a much cleaner way — trend, breakouts, and reversals become easier to spot. To build a Point & Figure chart, two key parameters must be defined: Box Size and Reversal Amount . 📌 Box Size Box size determines how much price movement is required to add a new X or O . In this example, the box size is $20 , meaning: Every $20 rise adds one X upward Every $20 drop adds one O downward 📌 Reversal Amount Reversal amount defines how many boxes price must move in the opposite direction to start a new column . In Point & Figure charts: Xs and Os never appear in the same column Each column contains only Xs or only Os In this example: Box size = $20 Reversal amount = 3 boxes So a reversal requires a $60 move in the opposite direction. 📌 Point & Figure Graph (Step-by-Step) Graph A If the current column is an X column and price continues to rise, new Xs are added to the same column as long as the box size rule is met. Graph B When price falls by 3 boxes ($60) , a new column begins to the right. Three Os are placed starting one box below the highest X of the previous column. Graph C If price continues to fall, additional Os are added downward in the same column. Graph D If price then rises by 3 boxes ($60) , another new column starts. Three Xs are placed one box above the lowest O of the previous column. Graph E As long as price continues higher without another 3-box reversal , Xs keep extending in the same column. For a deeper explanation of the theory and plotting rules, you can read my educational article here: 📌 Key Features Below are the main features of the Point & Figure indicator I developed, designed to make P&F charts clearer, more customizable, and easier to use directly on TradingView. • Two Display Modes: This indicator includes two different Point & Figure display styles. Line Mode draws a simplified P&F line based on the active column value, while Classic Mode plots the traditional Point & Figure structure using real X/O columns and reversal logic. • Optional Box Background (Line Mode): In Line Mode, you can enable an optional box-style background. This helps you visually follow each box step and makes reversals easier to spot, while still keeping the chart clean and readable. • Full Point & Figure Engine: The indicator builds Point & Figure columns using Box Size and Reversal Amount rules. A column continues only while price extends in the same direction, and a new column is created only when price reverses by the defined reversal distance. • Price Source Options (Close vs High/Low): You can choose between Close or High/Low as the price source. When High/Low is selected, the algorithm prioritizes continuation in the current trend direction first, and checks the opposite side only if the trend cannot be extended. This creates a more “classic” P&F behavior, especially on volatile candles. • Box Size Methods (Fixed / Percentage / ATR): The indicator supports three box size assignment methods. Fixed uses a constant value, Percentage adjusts box size dynamically based on price level, and ATR adapts box size using volatility. This allows the chart to stay usable across different instruments and market conditions. • ATR Locking for More Stable Columns: When ATR box size is selected, the indicator can lock the box size after each reversal. This means the active column keeps a consistent box size until the next reversal occurs, improving stability and avoiding frequent recalculation during the same swing. • Classic Mode Controls (Offset & Max Boxes): Classic Mode includes additional controls such as horizontal offset and a maximum “last boxes” limit. These options help you place the P&F structure more clearly on the chart and keep performance smooth when drawing many boxes. • Visual Customization: You can customize colors for rising and falling columns, borders, and reversal highlight areas. This makes it easy to match the indicator with your chart theme and improve clarity during live analysis. • Optimized Drawing Behavior: To keep the chart responsive, the Classic X/O box drawing is optimized and focused on the most recent structure. This helps reduce object load and improves usability on lower timeframes. 📌 Why use this indicator? Point & Figure charts are one of the best ways to filter market noise and focus only on meaningful price movement. Instead of printing a new bar just because time passes, this indicator updates only when price moves enough to fill a new box or trigger a reversal. This makes trend direction, breakouts, and key support/resistance levels much easier to read. Another big advantage is accessibility. On TradingView, the built-in Point & Figure chart type is available only for Plus and higher plans . This indicator allows you to use a Point & Figure-style structure directly on your chart, without needing to switch chart types or rely on paid plan access. 🔸🔸🔸 How to Use 🔸🔸🔸 ███████ Chart Type ███████ 📌 Chart Type: Line This mode draws Point & Figure structure as a clean line-based visualization. It’s ideal if you want a minimal look while still keeping the P&F logic. In Line Style , you can customize how the line and its structure looks: Line: Enables/disables the P&F line plotting. Rising (X): Sets the line color when the active column is an X (up) column. Falling (O): Sets the line color when the active column is an O (down) column. You can also enable the background box visualization: Box: [/b ] Shows P&F “step boxes” behind the line, so you can visually track each filled box and reversal structure. Rising (X) and Falling (O) box colors: Sets the main box colors for normal price movement after the reversal zone. In other words, once the reversal area is passed, these colors are used for the regular X (up) and O (down) boxes that continue the column. Reverse Area colors: Colors the reversal zone based on your selected Reversal Box Amount. In other words, it highlights the boxes that represent the reversal distance (example: the 3-box reversal area) with a different color, so you can clearly see where a column change would be triggered. 📌 Chart Type: Classic(X/O Boxes) This mode displays the traditional Point & Figure look using X and O columns, which is the most recognizable and “textbook” P&F style. In Classic (X/O Boxes) Style , you can control the visual layout: Offset: Shifts the whole P&F structure left/right from the last candle, so it doesn’t overlap price action. Max Last Boxes: Limits how many recent boxes are drawn for better performance. X Fill / O Fill: Sets the fill colors for X and O columns. Border: Controls the outline color of the Classic boxes. ███████ Calculation Methods ███████ 📌 Source This defines which price data is used to evaluate box creation and reversals. Close: All decisions - box extensions and reversals - are made using closing prices only. If the close fills a box in the direction of the current column, new Xs or Os are plotted. If the close reaches the reversal amount in the opposite direction, a new column is started. High/Low: Uses the full candle range (High and Low). This makes the chart more responsive because intrabar extremes can trigger new boxes and reversals. The logic is priority-based: If the current column is X (up) , the script checks High first to extend the up column. If it can’t extend, it checks Low for a reversal. If the current column is O (down) , the script checks Low first to extend the down column. If it can’t extend, it checks High for a reversal. 📌 Reversal Box Amount This is the classic Point & Figure reversal rule: how many boxes price must move in the opposite direction to start a new column . Example: If Reversal = 3, price must reverse by 3 boxes to switch from X → O or O → X. Higher reversal values create fewer reversals (smoother structure). Lower values create more frequent reversals (more sensitivity). 📌 Box Size Method Fixed: Box size stays constant at your chosen value. Percentage: Box size scales with price, recalculated dynamically as price moves. Important behavior: In Percentage mode, the box size is not recalculated on every tick. Instead, each new box size is updated step-by-step, using the previous box level as the reference. This means the box size adapts gradually as price progresses: when a new box is confirmed, the next box size is computed based on the last printed box value. ATR: Box size is based on volatility using ATR. ATR mode behavior: ATR mode, the indicator locks the box size for each column. When the chart switches direction (for example from an X column to an O column ), the script takes the ATR value at that reversal moment and uses it as the fixed box size for the entire new column. That box size will not change while the column keeps extending. However, reversal checks are still dynamic: the script monitors whether price has moved far enough to reverse by comparing the move against the latest ATR-based reversal requirement. So, the column’s boxes stay visually consistent, while the reversal decision can still react to current volatility. 📌 Fixed Box Size (only for Fixed method) Sets the constant price movement required to print 1 new box. Higher values = fewer boxes, smoother chart. Lower values = more boxes, more detail. 📌 Percentage (only for Percentage method) Defines the percent used to calculate each new box size. Example: 1 means each new box is approximately 1% of price, rounded to the symbol’s tick size. 📌 ATR Length (only for ATR method) Sets the ATR period used for volatility measurement. 📌 ATR Multiplier (only for ATR method) Final box size is calculated as: Box Size = ATR × Multiplier (rounded to tick size). Higher multiplier = larger boxes, fewer reversals. Lower multiplier = smaller boxes, more reversals.
Индикатор Pine Script®
от ARrowofTime
WT Crossover Strategy Main Chart Indicator# WT Crossover Strategy Main Chart Indicator ## Indicator Overview The WT Crossover Strategy Main Chart Indicator is a trading signal system based on the Wave Trend (WT) indicator, specifically designed for the TradingView platform. This indicator combines WT indicator crossover signals with ATR-based take profit and stop loss calculations, providing traders with clear entry signals and explicit risk management references. ## Core Features ### 1. Trading Signal Identification - WT Indicator Crossover Signals : Identifies potential trend reversals based on golden crosses/death crosses between WT1 and WT2 - EMA Trend Filtering : Optional EMA20 and EMA200 trend filtering to help confirm trend direction - Entry Point Markers : Green triangles mark long entry points, red triangles mark short entry points ### 2. Risk Management Visualization - Fixed-Length SL/TP Lines : Generates 10-bar length dashed lines at entry, marking take profit and stop loss prices - Trigger Status Display : When take profit or stop loss is triggered, dashed lines turn solid and display "Take Profit Triggered" or "Stop Loss Triggered" labels - ATR-Based Calculations : Automatically calculates take profit and stop loss prices using ATR indicator, adapting to different market volatility ### 3. Customizable Parameters - Preset Symbols : Built-in optimized parameters for Gold, Rebar, Fuel Oil, Bitcoin, Ethereum, etc. - Line Length Adjustment : Customizable display length for take profit and stop loss lines - ATR Parameter Adjustment : Adjustable ATR period, stop loss multiplier, and take profit multiplier - Filter Control : Enable or disable zone filtering and trend filtering ## Technical Features - Fixed-Length Lines : Take profit and stop loss lines only display for a fixed length, avoiding chart clutter - Status Change Markers : Intuitively displays take profit/stop loss status through line style changes and labels - Responsive Design : Automatically adapts to different timeframes and symbols - Clear Visual Hierarchy : Reasonable color scheme and marker size ensure clear and readable charts ## Usage Instructions 1. Load the Indicator : Apply the indicator to your chart 2. Select Symbol : Choose your trading symbol from the presets or manually adjust parameters 3. Observe Signals : - Consider going long when green triangles appear - Consider going short when red triangles appear 4. Set Stop Loss : Reference the red dashed line for stop loss placement 5. Set Take Profit : Reference the green dashed line for take profit placement 6. Monitor Status : When dashed lines turn solid and display labels, it indicates take profit or stop loss has been triggered ## Application Scenarios - Trend Trading : Combined with EMA filtering to identify medium-term trends - Swing Trading : Utilizes WT indicator's overbought/oversold characteristics to capture price reversals - Risk Control : Implements scientific risk-reward ratio management through ATR-calculated take profit and stop loss - Strategy Verification : Serves as an independent indicator to verify your trading strategy signals ## Notes - This indicator is for reference only and does not constitute investment advice - It is recommended to use in conjunction with other technical analysis tools - Please thoroughly backtest before live trading to adapt to your trading style - Different symbols may require parameter adjustments for optimal results
Индикатор Pine Script®
от redmagic533
Quantitative Trend and Sector DashboardQuantitative Trend and Sector Dashboard Overview The QTS Dashboard is a visual market context tool that summarizes relative strength, benchmark comparison, volatility normalization, and sector participation in a compact on-chart display. It is designed for analysis and situational awareness rather than trading signals or automated decisions. What makes it different Most relative strength tools compare symbols only to a broad index. This dashboard automatically assigns a relevant sector or industry benchmark based on ticker membership, enabling like-for-like comparison with similar instruments. The result is a multi-factor view of trend participation rather than a single metric. Core components • Benchmark Detection Maps symbols to sector or industry ETFs to improve comparison relevance. • Beta Normalization (252 bars) Beta is calculated using covariance and variance to scale thresholds according to typical volatility. • Dual Range Tracking Measures distance from 52-week highs and lows to show position within the yearly cycle. • Sector Participation Scan Evaluates major SPDR sectors and lists those currently meeting configurable strength criteria. • ATR Extension Quantifies price distance from midpoint using ATR to highlight statistically extended moves. Math summary • Relative Spread = Benchmark %BelowHigh − Symbol %BelowHigh • Beta = Covariance / Variance • Adjusted Threshold = Base × Beta • Extension = (Price − Midpoint) / ATR All calculations use confirmed bars. No intentional repaint logic. Status states • Leader — stronger relative performance • Neutral — in line with benchmark • Lagging — weaker relative performance • Extended — large volatility stretch States describe context only. How to use • Compare Spread and Beta for relative positioning • Monitor sector list for participation breadth • Use extension values to gauge stretch conditions • Adjust timeframe and thresholds to match your workflow • Show, hide, or reposition the dashboard as needed Example charts Disclaimer Educational and informational only. This indicator does not provide buy or sell signals or investment advice. Trading involves risk.
Индикатор Pine Script®
от ibotrade
Std Dev Zones MTFStd Dev Zones MTF Key Features Overview • ⭐ Built using ADR10 (Average Daily Range) logic to measure volatility-based standard deviation zones from timeframe open. • ⚙️ ADR10 STD DEV Zones Pine v6 — MTF support for Daily, H4, H8, H12 timeframes for multi-timeframe volatility analysis. • 📦 Dynamic zones calculated from period open (Daily/H4/H8/H12) using average range = clean, objective volatility structure. • 📊 ±0.5 SD zones = neutral territory — price within normal range from open. • 📈 +0.75 SD & +1.0 SD = OVERBOUGHT zones — price extended above normal range, potential exhaustion or reversal area. • 📉 -0.75 SD & -1.0 SD = OVERSOLD zones — price extended below normal range, potential exhaustion or reversal area. • 🔥 +1.25 SD = MAX OVERBOUGHT — extreme extension above open, highest volatility threshold for exits/profit-taking. • 🧊 -1.25 SD = MAX OVERSOLD — extreme extension below open, highest volatility threshold for exits/profit-taking. • 🧠 Adjustable zone thickness (% of ADR10) so zones scale with market volatility — perfect for Gold, Forex, Crypto swings. • 🎨 Color-coded zones with large labels inside each zone for instant visual clarity — no interpretation lag. • 🧭 Zones extend throughout the trading period so you can track price behavior relative to volatility bands. • 🟩🟪 Dual color system for upper/lower zones + descriptive labels - zero confusion on market extension. • 🧼 Clean overlay display: zones + open line = actionable, minimal, fast volatility assessment. • ⭐ Apply to your M15/M30/H1/H4 TradingView chart — your volatility roadmap for Gold, FX, Crypto, Indices. • 🚀 Use for exit planning & take-profit levels at overbought/oversold extremes — NOT for standalone entry signals. • 📦 Enable/Disable individual zone levels (±0.5, ±0.75, ±1.0, ±1.25) to customize your chart view. • 📦 Too cluttered? Adjust "Periods to Show" or increase zone thickness % from settings. • 🎯 How to use this? Monitor price behavior at overbought/oversold zones for potential reversals or continuations. Use Max Overbought/Oversold levels for aggressive profit-taking. Combine with your entry system for complete trade management. • ⚠️ IMPORTANT NOTICE: This indicator is designed to measure market volatility and identify potential exit/take-profit zones. It should NOT be used as a standalone signal for entering trades. Use it in conjunction with your trading strategy to assess overbought/oversold conditions and plan exits. NQ GBPUSD BTCUSD
Индикатор Pine Script®
от ProjectSyndicate
1
xxmonk. Absolute FractalDescription: Concept This indicator is a specialized Fractal Time Engine designed for high-precision scalping and swing trading (specifically optimized for NQ/Nasdaq). Unlike standard Fibonacci time zones that drift or overlap, this script creates a strictly nested "Vibration" structure across three timeframes simultaneously. It treats time as a fractal, where smaller cycles are mathematically "imprisoned" within larger cycles. How It Works The indicator projects the Fibonacci sequence (1, 3, 5, 8, 13, 21, 34, 55, 89, 144) from a single Master Anchor, but creates a hierarchy of containment: HTF (Higher Timeframe - Red): The Master Cycle (e.g., Daily). These are the hard walls. MDL (Middle Timeframe - Orange): Nested strictly between HTF milestones. The count resets to "1" instantly at every HTF line and cannot exist past the next HTF line. LTF (Lower Timeframe - Yellow): Nested strictly between MDL milestones. The count resets to "1" instantly at every MDL line. Key Features Strict "Prisoner" Logic: A lower timeframe cycle is physically terminated the moment it hits a higher timeframe milestone. This prevents clutter and ensures the "1" always aligns with the momentum injection of the larger trend. The "Rigged" Anchor: The math uses an (n-1) offset, ensuring that Milestone "1" sits exactly on the anchor vertical, removing the visual drift found in standard tools. Dynamic Visibility Engine: To solve TradingView’s 500-label limit, this script uses a smart buffer that only draws labels currently visible on your screen. This ensures that the critical early counts (1, 3, 5) are never deleted to make room for off-screen history. Tiered Visuals: Labels are automatically stacked at different percentage heights (15%, 8%, 2%) above price to prevent overlap. Settings & Customization Master Anchor: Select the exact start time for the cycle. Timeframes: Fully customizable periods for HTF, MDL, and LTF layers. Visuals: Individual control over Color, Line Style (Solid/Dash/Dot), Thickness, and Vertical Height for each tier. How to Use Set the Master Start Anchor to a significant high/low or session open. Look for "Confluence Clusters": Areas where an HTF, MDL, and LTF line all land on the same candle often indicate a high-probability reversal or "Rigged" expansion point. Use the LTF (Yellow) counts for entry timing (1, 3, 5) inside the larger trend direction defined by the HTF (Red) walls.
Индикатор Pine Script®
от xmonkk
1D % Change (Histogram)1D % Change Histogram (Daily-Anchored) Description This indicator plots the 1-day percent change as a histogram above/below the zero line. It includes 3 calculation modes: • Last vs Prev Close: compares the latest available price to the prior daily close (useful for an “in-progress” daily change on intraday charts). • Close vs Prev Close: classic daily close-to-close change (stable per day). • Close vs Open: session move for the day (open-to-close). The logic is anchored to the Daily timeframe, so you can view it on 5m/15m/1H charts while keeping a consistent “1D” reference. How to use: • Want a live-updating read on intraday charts? Use Last vs Prev Close. • Want clean day-by-day comparisons? Use Close vs Prev Close. • Want a session “push” metric? Use Close vs Open. Notes • Green bars when value is ≥ 0, red bars when < 0. • Optional zero line and last-value tag. • Can run on the chart symbol or a user-selected symbol. Limitations • Different data feeds may define “price” differently (last/close/settle), so values can vary across providers. • In Last vs Prev Close mode the value updates intraday (expected behavior). Disclaimer This script is for educational and informational purposes only. It is not financial advice and does not provide buy/sell signals or entry/exit recommendations. Use at your own risk and always verify with your own data.
Индикатор Pine Script®
от Yesid_Correa_Cano