Регистрация

Поиск скриптов по запросу "分享回复展开144条回复瑞丰天"

Ascending Elliot Wave Patterns [theEccentricTrader]█   OVERVIEW This indicator automatically draws ascending Elliot Wave patterns and price projections derived from the ranges that constitute the patterns. █   CONCEPTS Green and Red Candles • A green candle is one that closes with a close price equal to or above the price it opened. • A red candle is one that closes with a close price that is lower than the price it opened. Swing Highs and Swing Lows • A swing high is a green candle or series of consecutive green candles followed by a single red candle to complete the swing and form the peak. • A swing low is a red candle or series of consecutive red candles followed by a single green candle to complete the swing and form the trough. Peak and Trough Prices (Basic) • The peak price of a complete swing high is the high price of either the red candle that completes the swing high or the high price of the preceding green candle, depending on which is higher. • The trough price of a complete swing low is the low price of either the green candle that completes the swing low or the low price of the preceding red candle, depending on which is lower. Historic Peaks and Troughs The current, or most recent, peak and trough occurrences are referred to as occurrence zero. Previous peak and trough occurrences are referred to as historic and ordered numerically from right to left, with the most recent historic peak and trough occurrences being occurrence one. Range The range is simply the difference between the current peak and current trough prices, generally expressed in terms of points or pips. Support and Resistance • Support refers to a price level where the demand for an asset is strong enough to prevent the price from falling further. • Resistance refers to a price level where the supply of an asset is strong enough to prevent the price from rising further. Support and resistance levels are important because they can help traders identify where the price of an asset might pause or reverse its direction, offering potential entry and exit points. For example, a trader might look to buy an asset when it approaches a support level , with the expectation that the price will bounce back up. Alternatively, a trader might look to sell an asset when it approaches a resistance level , with the expectation that the price will drop back down. It's important to note that support and resistance levels are not always relevant, and the price of an asset can also break through these levels and continue moving in the same direction. Upper Trends • A return line uptrend is formed when the current peak price is higher than the preceding peak price. • A downtrend is formed when the current peak price is lower than the preceding peak price. • A double-top is formed when the current peak price is equal to the preceding peak price. Lower Trends • An uptrend is formed when the current trough price is higher than the preceding trough price. • A return line downtrend is formed when the current trough price is lower than the preceding trough price. • A double-bottom is formed when the current trough price is equal to the preceding trough price. Muti-Part Upper and Lower Trends • A multi-part return line uptrend begins with the formation of a new return line uptrend, or higher peak, and continues until a new downtrend, or lower peak, completes the trend. • A multi-part downtrend begins with the formation of a new downtrend, or lower peak, and continues until a new return line uptrend, or higher peak, completes the trend. • A multi-part uptrend begins with the formation of a new uptrend, or higher trough, and continues until a new return line downtrend, or lower trough, completes the trend. • A multi-part return line downtrend begins with the formation of a new return line downtrend, or lower trough, and continues until a new uptrend, or higher trough, completes the trend. Double Trends • A double uptrend is formed when the current trough price is higher than the preceding trough price and the current peak price is higher than the preceding peak price. • A double downtrend is formed when the current peak price is lower than the preceding peak price and the current trough price is lower than the preceding trough price. Muti-Part Double Trends • A multi-part double uptrend begins with the formation of a new uptrend that proceeds a new return line uptrend, and continues until a new downtrend or return line downtrend ends the trend. • A multi-part double downtrend begins with the formation of a new downtrend that proceeds a new return line downtrend, and continues until a new uptrend or return line uptrend ends the trend. Wave Cycles A wave cycle is here defined as a complete two-part move between a swing high and a swing low, or a swing low and a swing high. The first swing high or swing low will set the course for the sequence of wave cycles that follow; for example a chart that begins with a swing low will form its first complete wave cycle upon the formation of the first complete swing high and vice versa. Figure 1. Fibonacci Retracement and Extension Ratios The Fibonacci sequence is a series of numbers in which each number is the sum of the two preceding numbers, starting with 0 and 1. For example 0 + 1 = 1, 1 + 1 = 2, 1 + 2 = 3, and so on. Ultimately, we could go on forever but the first few numbers in the sequence are as follows: 0 , 1, 1, 2, 3, 5, 8, 13, 21, 34, 55, 89, 144. The extension ratios are calculated by dividing each number in the sequence by the number preceding it. For example 0/1 = 0, 1/1 = 1, 2/1 = 2, 3/2 = 1.5, 5/3 = 1.6666..., 8/5 = 1.6, 13/8 = 1.625, 21/13 = 1.6153..., 34/21 = 1.6190..., 55/34 = 1.6176..., 89/55 = 1.6181..., 144/89 = 1.6179..., and so on. The retracement ratios are calculated by inverting this process and dividing each number in the sequence by the number proceeding it. For example 0/1 = 0, 1/1 = 1, 1/2 = 0.5, 2/3 = 0.666..., 3/5 = 0.6, 5/8 = 0.625, 8/13 = 0.6153..., 13/21 = 0.6190..., 21/34 = 0.6176..., 34/55 = 0.6181..., 55/89 = 0.6179..., 89/144 = 0.6180..., and so on. 1.618 is considered to be the 'golden ratio', found in many natural phenomena such as the growth of seashells and the branching of trees. Some now speculate the universe oscillates at a frequency of 0,618 Hz, which could help to explain such phenomena, but this theory has yet to be proven. Traders and analysts use Fibonacci retracement and extension indicators, consisting of horizontal lines representing different Fibonacci ratios, for identifying potential levels of support and resistance. Fibonacci ranges are typically drawn from left to right, with retracement levels representing ratios inside of the current range and extension levels representing ratios extended outside of the current range. If the current wave cycle ends on a swing low, the Fibonacci range is drawn from peak to trough. If the current wave cycle ends on a swing high the Fibonacci range is drawn from trough to peak. Elliot Wave Patterns Ralph Nelson Elliott, authored his book on Elliott wave theory titled "The Wave Principle" in 1938. In this book, Elliott presented his theory of market behaviour, which he believed reflected the natural laws that govern human behaviour. The Elliott Wave Theory is based on the principle that waves have a tendency to unfold in a specific sequence of five waves in the direction of the trend, followed by three waves leading in the opposite direction. This pattern is called a 5-3 wave pattern and is the foundation of Elliott's theory. The five waves in the direction of the trend are labelled 1, 2, 3, 4, and 5, while the three waves in the opposite direction are labelled A, B, and C. Waves 1, 3, and 5 are impulse waves, while waves 2 and 4 are corrective waves. Waves A and C are also corrective waves, while wave B is an impulse wave. According to Elliott, the pattern of waves is fractal in nature, meaning that it occurs on all time frames, from the smallest to the largest. In Elliott Wave Theory, the distance that waves move from each other depends on the specific market conditions and the amplitude of the waves involved. There is no fixed rule or limit for how far waves should move from each other, however, there are several guidelines to help identify and measure wave distances. One of the most common guidelines is the Fibonacci ratios, which can be used to describe the relationships between wave lengths. For example, Elliott identified that wave 3 is typically the strongest and longest wave, and it tends to be 1.618 times the length of wave 1. Meanwhile, wave 2 tends to retrace between 50% and 78.6% of wave 1, and wave 4 tends to retrace between 38.2% and 78.6% of wave 3. In general, the patterns are quite rare and the distances that the waves move in relation to one another is subject to interpretation. For such reasons, I have simply included the ratios of the current ranges as ratios of the preceding ranges in the wave labels and it will, ultimately, be up to the user to decide whether or not the patterns qualify as valid. █   FEATURES Inputs • Show Projections • Pattern Color • Label Color • Extend Current Projection Lines █   LIMITATIONS All green and red candle calculations are based on differences between open and close prices, as such I have made no attempt to account for green candles that gap lower and close below the close price of the preceding candle, or red candles that gap higher and close above the close price of the preceding candle. This may cause some unexpected behaviour on some markets and timeframes. I can only recommend using 24-hour markets, if and where possible, as there are far fewer gaps and, generally, more data to work with.
Индикатор Pine Script®
от theEccentricTrader
Fibonacci Ratios HTF [theEccentricTrader]█   OVERVIEW This indicator automatically draws higher timeframe Fibonacci levels from current peak to current trough or current trough to current peak, depending on where the current wave cycle ends. In the example above I have set the higher timeframe resolution to 1-month and applied it to a daily chart. █   CONCEPTS Green and Red Candles • A green candle is one that closes with a high price equal to or above the price it opened. • A red candle is one that closes with a low price that is lower than the price it opened. Swing Highs and Swing Lows • A swing high is a green candle or series of consecutive green candles followed by a single red candle to complete the swing and form the peak. • A swing low is a red candle or series of consecutive red candles followed by a single green candle to complete the swing and form the trough. Peak and Trough Prices (Basic) • The peak price of a complete swing high is the high price of either the red candle that completes the swing high or the high price of the preceding green candle, depending on which is higher. • The trough price of a complete swing low is the low price of either the green candle that completes the swing low or the low price of the preceding red candle, depending on which is lower. Historic Peaks and Troughs The current, or most recent, peak and trough occurrences are referred to as occurrence zero. Previous peak and trough occurrences are referred to as historic and ordered numerically from right to left, with the most recent historic peak and trough occurrences being occurrence one. Wave Cycles A wave cycle is here defined as a complete two-part move between a swing high and a swing low, or a swing low and a swing high. The first swing high or swing low will set the course for the sequence of wave cycles that follow; for example a chart that begins with a swing low will form its first complete wave cycle upon the formation of the first complete swing high and vice versa. Figure 1. Range The range is simply the difference between the current peak and current trough prices, generally expressed in terms of points or pips. Support and Resistance • Support refers to a price level where the demand for an asset is strong enough to prevent the price from falling further. • Resistance refers to a price level where the supply of an asset is strong enough to prevent the price from rising further. Support and resistance levels are important because they can help traders identify where the price of an asset might pause or reverse its direction, offering potential entry and exit points. For example, a trader might look to buy an asset when it approaches a support level , with the expectation that the price will bounce back up. Alternatively, a trader might look to sell an asset when it approaches a resistance level , with the expectation that the price will drop back down. It's important to note that support and resistance levels are not always relevant, and the price of an asset can also break through these levels and continue moving in the same direction. Fibonacci Retracement and Extension Ratios The Fibonacci sequence is a series of numbers in which each number is the sum of the two preceding numbers, starting with 0 and 1. For example 0 + 1 = 1, 1 + 1 = 2, 1 + 2 = 3, and so on. Ultimately, we could go on forever but the first few numbers in the sequence are as follows: 0 , 1, 1, 2, 3, 5, 8, 13, 21, 34, 55, 89, 144. The extension ratios are calculated by dividing each number in the sequence by the number preceding it. For example 0/1 = 0, 1/1 = 1, 2/1 = 2, 3/2 = 1.5, 5/3 = 1.6666..., 8/5 = 1.6, 13/8 = 1.625, 21/13 = 1.6153..., 34/21 = 1.6190..., 55/34 = 1.6176..., 89/55 = 1.6181..., 144/89 = 1.6179..., and so on. The retracement ratios are calculated by inverting this process and dividing each number in the sequence by the number proceeding it. For example 0/1 = 0, 1/1 = 1, 1/2 = 0.5, 2/3 = 0.666..., 3/5 = 0.6, 5/8 = 0.625, 8/13 = 0.6153..., 13/21 = 0.6190..., 21/34 = 0.6176..., 34/55 = 0.6181..., 55/89 = 0.6179..., 89/144 = 0.6180..., and so on. 1.618 is considered to be the 'golden ratio', found in many natural phenomena such as the growth of seashells and the branching of trees. Some now speculate the universe oscillates at a frequency of 0,618 Hz, which could help to explain such phenomena, but this theory has yet to be proven. Traders and analysts use Fibonacci retracement and extension indicators, consisting of horizontal lines representing different Fibonacci ratios, for identifying potential levels of support and resistance. Fibonacci ranges are typically drawn from left to right, with retracement levels representing ratios inside of the current range and extension levels representing ratios extended outside of the current range. If the current wave cycle ends on a swing low, the Fibonacci range is drawn from peak to trough. If the current wave cycle ends on a swing high the Fibonacci range is drawn from trough to peak. Although there is some contention over which popular levels are and are not actually Fibonacci ratios, such as 50% and 100%, in this script I have based my retracement level calculations on the ratios of 23.6%, 38.2%, 50%, 61.8%, 78.6% and 100%. And my extension level calculations on the ratios of 161.8%, 261.8%, 361.8%, 423.6% and 461.8%. █   FEATURES Inputs • HTF Resolution • Show Fibonacci Extensions • 00.0% Line Color • 23.6% Line Color • 38.2% Line Color • 50.0% Line Color • 61.8% Line Color • 78.6% Line Color • 100.0% Line Color • 161.8% Line Color • 261.8% Line Color • 361.8% Line Color • 423.6% Line Color • 461.8% Line Color • Extend Line Type • Show Labels • Label Colors █   LIMITATIONS All green and red candle calculations are based on differences between open and close prices, as such I have made no attempt to account for green candles that gap lower and close below the close price of the preceding candle, or red candles that gap higher and close above the close price of the preceding candle. This may cause some unexpected behaviour on some markets and timeframes. I can only recommend using 24-hour markets, if and where possible, as there are far fewer gaps and, generally, more data to work with. Similarly, if the current timeframe is not a factor of the higher timeframe there will be occasions when the left hand offset is out by a couple of bars. This is because the calculations are ultimately based on how many lower timeframe bars there are inside a sequence of higher timeframe bars. The indicator will also behave unexpectedly if the higher timeframe resolution is lower than the current timeframe, but that should be expected. If the lines do not draw or you see a study error saying that the script references too many candles in history, this is most likely because the higher timeframe anchor point is not present on the current timeframe. This problem usually occurs when referencing a higher timeframe, such as the 1-month, from a much lower timeframe, such as the 1-minute. How far you can lookback for higher timeframe anchor points on the current timeframe will also be limited by your Trading View subscription plan. Premium users get 20,000 candles worth of data, pro+ and pro users get 10,000, and basic users get 5,000.
Индикатор Pine Script®
от theEccentricTrader
8
Fibonacci Ratios [theEccentricTrader]█   OVERVIEW This indicator automatically draws Fibonacci levels from current peak to current trough or current trough to current peak, depending on where the current wave cycle ends. █   CONCEPTS Green and Red Candles • A green candle is one that closes with a high price equal to or above the price it opened. • A red candle is one that closes with a low price that is lower than the price it opened. Swing Highs and Swing Lows • A swing high is a green candle or series of consecutive green candles followed by a single red candle to complete the swing and form the peak. • A swing low is a red candle or series of consecutive red candles followed by a single green candle to complete the swing and form the trough. Peak and Trough Prices (Basic) • The peak price of a complete swing high is the high price of either the red candle that completes the swing high or the high price of the preceding green candle, depending on which is higher. • The trough price of a complete swing low is the low price of either the green candle that completes the swing low or the low price of the preceding red candle, depending on which is lower. Historic Peaks and Troughs The current, or most recent, peak and trough occurrences are referred to as occurrence zero. Previous peak and trough occurrences are referred to as historic and ordered numerically from right to left, with the most recent historic peak and trough occurrences being occurrence one. Wave Cycles A wave cycle is here defined as a complete two-part move between a swing high and a swing low, or a swing low and a swing high. The first swing high or swing low will set the course for the sequence of wave cycles that follow; for example a chart that begins with a swing low will form its first complete wave cycle upon the formation of the first complete swing high and vice versa. Figure 1. Range The range is simply the difference between the current peak and current trough prices, generally expressed in terms of points or pips. Support and Resistance • Support refers to a price level where the demand for an asset is strong enough to prevent the price from falling further. • Resistance refers to a price level where the supply of an asset is strong enough to prevent the price from rising further. Support and resistance levels are important because they can help traders identify where the price of an asset might pause or reverse its direction, offering potential entry and exit points. For example, a trader might look to buy an asset when it approaches a support level , with the expectation that the price will bounce back up. Alternatively, a trader might look to sell an asset when it approaches a resistance level , with the expectation that the price will drop back down. It's important to note that support and resistance levels are not always relevant, and the price of an asset can also break through these levels and continue moving in the same direction. Fibonacci Retracement and Extension Ratios The Fibonacci sequence is a series of numbers in which each number is the sum of the two preceding numbers, starting with 0 and 1. For example 0 + 1 = 1, 1 + 1 = 2, 1 + 2 = 3, and so on. Ultimately, we could go on forever but the first few numbers in the sequence are as follows: 0 , 1, 1, 2, 3, 5, 8, 13, 21, 34, 55, 89, 144. The extension ratios are calculated by dividing each number in the sequence by the number preceding it. For example 0/1 = 0, 1/1 = 1, 2/1 = 2, 3/2 = 1.5, 5/3 = 1.6666..., 8/5 = 1.6, 13/8 = 1.625, 21/13 = 1.6153..., 34/21 = 1.6190..., 55/34 = 1.6176..., 89/55 = 1.6181..., 144/89 = 1.6179..., and so on. The retracement ratios are calculated by inverting this process and dividing each number in the sequence by the number proceeding it. For example 0/1 = 0, 1/1 = 1, 1/2 = 0.5, 2/3 = 0.666..., 3/5 = 0.6, 5/8 = 0.625, 8/13 = 0.6153..., 13/21 = 0.6190..., 21/34 = 0.6176..., 34/55 = 0.6181..., 55/89 = 0.6179..., 89/144 = 0.6180..., and so on. 1.618 is considered to be the 'golden ratio', found in many natural phenomena such as the growth of seashells and the branching of trees. Some now speculate the universe oscillates at a frequency of 0,618 Hz, which could help to explain such phenomena, but this theory has yet to be proven. Traders and analysts use Fibonacci retracement and extension indicators, consisting of horizontal lines representing different Fibonacci ratios, for identifying potential levels of support and resistance. Fibonacci ranges are typically drawn from left to right, with retracement levels representing ratios inside of the current range and extension levels representing ratios extended outside of the current range. If the current wave cycle ends on a swing low, the Fibonacci range is drawn from peak to trough. If the current wave cycle ends on a swing high the Fibonacci range is drawn from trough to peak. Although there is some contention over which popular levels are and are not actually Fibonacci ratios, such as 50% and 100%, in this script I have based my retracement level calculations on the ratios of 23.6%, 38.2%, 50%, 61.8%, 78.6% and 100%. And my extension level calculations on the ratios of 161.8%, 261.8%, 361.8%, 423.6% and 461.8%. █   FEATURES Inputs • Show Fibonacci Extensions • 00.0% Line Color • 23.6% Line Color • 38.2% Line Color • 50.0% Line Color • 61.8% Line Color • 78.6% Line Color • 100.0% Line Color • 161.8% Line Color • 261.8% Line Color • 361.8% Line Color • 423.6% Line Color • 461.8% Line Color • Extend Line Type • Show Labels • Label Colors █   LIMITATIONS All green and red candle calculations are based on differences between open and close prices, as such I have made no attempt to account for green candles that gap lower and close below the close price of the preceding candle, or red candles that gap higher and close above the close price of the preceding candle. This may cause some unexpected behaviour on some markets and timeframes. I can only recommend using 24-hour markets, if and where possible, as there are far fewer gaps and, generally, more data to work with.
Индикатор Pine Script®
от theEccentricTrader
Fibonacci Moving Averages Input(FibMAI) Fibonacci Moving Averages Input is a strategy based on moving averages cross-over or cross-under signals. The bullish golden cross appears on a chart when a stock's short-term moving average crosses above its long-term moving average. The bearish death cross appears on a chart when a stock’s short-term moving average, crosses below its long-term moving average. The general market consensus values used are the 50-day moving average and the 200-day moving average. With the (FibMAI) Fibonacci Moving Averages Input strategy you can use any value you choose for your bullish or bearish cross. For visual display purposes I have a lot of the Fib Moving Averages 1, 2, 3, 5, 8, 13, 21, 34, 55, 89, 144, 233, 377, 610, 987 shown while hiding the chart candlesticks. But to use this indicator I click on only a couple of MA's to see if there's a notable cross-over or cross-under pattern signal. Then, most importantly, I back test those values into the FibMAI strategy Long or Short settings input. For example, this NQ1! day chart has it's Long or Short settings input as follows: Bullish = FibEMA34 cross-over FibEMA144 Bearish = FibEMA55 cross-under FibSMA144 As you can see you can mix or match 4 different MA's values either Exponential or Simple. Default color settings: Rising value = green color Falling value = red color Default Visual FibMA settings: FibEMA's 1, 2, 3, 5, 8, 13, 21, 34, 55, 89, 144, 233, 377, 610, 987, 1597, 2584, 4181 Default Visual MA settings: SMA's 50, 100, 150, 200 Default Long or Short settings: Bullish = FibEMA34 cross-over FibEMA144 Bearish = FibEMA55 cross-under FibSMA144
Стратегия Pine Script®
от Options360
Kapua Whenua LANDZZ1Kapua Whenua means Earth's Clouds in Maori language, this indicator was created to show impulses and trends of the asset's price movement both up and down. The Indicator was made based on key numbers of the golden ratio: Conversion Line: Kw 17 (Purple Color) Kw 34 - Short Period Fractal (Light Blue Color) Kw 72 - Short/Medium Period Fractal (Orange) Kw 144 - Medium Period Fractal (Yellow Color) Kw 305 - Medium/Long Period Fractal (Dark Blue Color) Kw 610 - Long Period Fractal (Grey) Kw 1292 - Long Period Fractal+ (Black Color) The baseline or also called the conversion line is identified by the Color Purple of value 17. How to read the indicator: Every time the conversion line (Purple Color 17 periods) crosses a Kw value (Kapua Whenua) it will always look for the next KW line above or below the value as support or resistance. For example: If we are in a bull market, and the price crosses below the KW17 conversion line it will go towards KW 34 as support, if the price breaks KW 34 it will go towards the next line below KW 34 as support. Every time the conversion line or the price crosses a higher value of Kapua Whenua (KW) this trend will be stronger, it means, if the conversion line (KW 17) crosses above KW 305 it will indicate more strength than if it had crossed above the KW 72 or 144 for example. So to get better results trading with the trend, always observe if the conversion line and the price are below or above some Medium/Long Period KW. Note also that, in an uptrend, it could be that all KW are below each other. In a downtrend, it could be that all KW are on top of each other. This indicates that the farther the price is from the fractals the stronger the trend is, also, when there is a narrowing of the fractals means that the price will start to go sideways. If the price is between 2 or more Fractals, it will indicate consolidation. A really good trend is considered when the price or the Short/Medium Period Fractals are all above or below at KW 610, which is a long period fractal, meaning a strong uptrend or downtrend. A larger KW can be at the same point as a smaller KW, however, the stronger color will be shown above the weaker one. ***Larger chart timeframes are better to see longer KW fractals that are above or below the price, if your chart timeframe doesn't show a bigger support or resistance fractal, change the chart time to another longer period** Tip - Get used to looking at line colors as your indicators, just like moving averages. You can also take or place any fractal at any time in the configuration menu.
Индикатор Pine Script®
от landzz1
5
Stochastic RSI + WMA + SMA strat// "...an entry signal it's a cross down or up on // the stochastics. if you're in a downtrend // on the hourly time frame you // must also be in a downtrend on the five // minute so the five period has to be below the 144 // as long as the five period is still trading below // the 144 period on both the hourly and the five minutes // we are looking for these short signals crosses down // in the overbought region of the stochastic. Viceversa for longs" // Works well with a wide stop with 20 bars lookback // for the SL level and a 2:1 reward ratio Take Profit . // These parameters can be modified in the Inputs section of the strategy panel.
Стратегия Pine Script®
от tweakerID
1
72s Strat: Backtesting Adaptive HMA+ pt.1This is a follow up to my previous publication of Adaptive HMA+ few months ago, as a mean to provide some kind of initial backtesting tools. Which can be use to explore many possible strategies, optimise its settings to better conform user's pair/tf, and hopefully able to help tweaking your general strategy. If you haven't read the study or use the indicator, kindly go here first to get the overall idea. The first strategy introduce in this backtest is one most basic already described in the study; buy/sell is when movement is there and everything is on the right side; When RSI has turned to other side, we can use it as exit point (if in profit of course, else just let it hit our TP/SL, why would we exit before profit). Also, base on RSI when we make entry, we can further differentiate type of signals. --Please check all comments in code directly where the signals , entries , and exits section are. Second additional strategy to check; is when we also use second faster Adaptive HMA+ for exit. So this is like a double orders on a signal but with different exit-rule (/more on this on snapshots below). Alternatively, you can also work the code so to only use this type of exit. There's also an additional feature which you can enable its visuals, the Distance Zone , is to help measuring price distance to our xHMA+. It's just a simple atr based envelope really, I already put the sample code in study's comment section, but better gonna update it there directly for non-coder too, after this. In this sample I use Lot for order quantity size just because that's what I use on my broker. Also what few friends use while we forward-testing it since the study is published, so we also checked/compared each profit/loss report by real number. To use default or other unit of measurement, change the entry code accordingly. If you change your order size, you should also change the commission in Properties Tab. My broker commission is 5 USD per order/lot, so in there with example order size 0.1 lot I put commission 0.5$ per order (I'll put 2.5$ for 0.5 lot, 10$ for 2 lot, and so on). Crypto usually has higher charge. --It is important that you should fill it base on your broker. SETTINGS I'm trying to keep it short. Please explore it further again. (Beginner should also first get acquaintance with terms use here.) ORDERS: Base Minimum Profit Before Exit: The number is multiplier of ongoing ATR. Means that when basic exit condition is met, algo will check whether you're already in minimum profit or not, if not, let it still run to TP or SL, or until it meets subsequent exit condition, then it will check again. Default Target Profit: Multiplier of ATR at signal. If reached before any eligible exit condition is met, exit TP. Base StopLoss Point: You can change directly in code to use other like ATR Trailing SL, fix percent SL, or whatever. In the sample, 4 options provided. Maximum StopLoss: This is like a safety-net, that if at some point your chosen SL point from input above happens to be exceeding this maximum input that you can tolerate, then this max point is the one will be use as SL. Activate 2nd order...: The additional doubling of certain buy/sell with different exits as described above. If enable, you should also set pyramiding to at least: 2. If not, it does nothing. ADAPTIVE HMA+ PERIOD Many users already have their own settings for these. So in here I only sample the default as first presented in the study. Make it to your adaptive. MARKET MOVEMENT (1) Now you can check in realtime how much slope degree is best to define your specific pair/tf is out of congestion (yellow) area. And (2) also able to check directly what ATR lengths are more suitable defining your pair's volatility. DISTANCE ZONE Distance Multiplier. Each pair/tf has its own best distance zone (in xHMA+ perspective). The zone also determine whether a signal should appear or not. (Or what type of signal, if you wanna go more detail in constructing your strategy) USAGE (Provided you already have your own comfortable settings for minimum-maximum period of Adaptive HMA+. Best if you already have backtested it manually too and/or apply as an add-on to your working strategy) 1. In our experiences, first most important to define is both elements in the Market Movement Settings . These also tend to be persistent for whole season since it's kinda describing that pair/tf overall behaviour. Don't worry if you still get a low Profit Factor here, but by tweaking you should start to see positive changes in one of Max Drawdown and Net Profit, or Percent Profitable. 2. Afterwards, find your pair/tf Distance Zone . When optimising this, what we seek is just a "not to bad" equity curves to start forming. At least Max Drawdown should lessen more. Doesn't have to be great already, but should be better, no red in Net Profit. 3. Then go manage the "Trailing Minimum Profit", TP, SL, and max SL. 4. Repeat 1,2,3. 👻 5. Manage order size, commission, and/or enable double-order (need pyramiding) if you like. Check if your equity can handle max drawdown before margin call. 6. After getting an acceptable backtest result, go to List of Trades tab and find the biggest loss or when many sequencing loss in a row happened. Click on it to go to exact point on chart, observe why the signal failed and get at least general idea how it can be prevented . The rest is yours, you should know your pair/tf more than other. You can also re-explore your minimum-maximum period for both Major and minor xHMA+. Keep in mind that all numbers in Setting are conceptually in a form of range . You don't want to get superb equity curves but actually a "fragile" , means one can easily turn it to disaster just by changing only a fraction in one/two of the setting. --- If you just wanna test the strength of the indicator alone, you can disable "Use StopLoss" temporarily while optimising settings. Using no SL might be tempting in overall result data in some cases, but NOTE: It is not recommended to not using SL, don't forget that we deliberately enter when it's in high volatility. If want to add flexibility or trading for long-term, just maximise your SL. ie.: chose SL Point>ATR only and set it maximum. (Check your max drawdown after this). I think this is quite important specially for beginners, so here's an example; Hypothetically in below scenario, because of some settings, the buy order after the loss sell signal didn't appear. Let's say if our initial capital only 1000$ using leverage and order size 0,5 lot (risky position sizing already), moreover if this happens at the beginning of your trading season, that's half of account gone already in one trade . Your max SL should've made you exit after that pumping bar. The Trailing Minimum Profit is actually look like this. Search in the code if you want to plot it. I just don't like too many lines on chart. To maximise profit we can try enabling double-order. The only added rule coded is: RSI should rising when buy and falling when sell. 2nd signal will appears above or below default buy/sell signal. (Of course it's also prone to double-loss, re-check your max drawdown after. Profit factor play its part in here for a long run). Snapshot in comparison: Two default sell signals on left closed at RSI exit, the additional sell signal closed later on when price crossover minor xHMA+. On buy side, price haven't met our minimum profit when first crossunder minor xHMA+. If later on we hit SL on this "+buy" signal, at least we already profited from default buy signal. You can also consider/treat this as multiple TP points. For longer-term trading, what you need to maximise is the Minimum Profit , so it won't exit whenever an exit condition happened, it can happen several times before reaching minimum profit. Hopefully this snapshot can explain: Notice in comparison default sell and buy signal now close in average after 3 days. What's best is when we also have confirmation from higher TF. It's like targeting higher TF by entering from smaller TF. As also mention in the study, we can still experiment via original HMA by putting same value for minimum-maximum period setting. This is experimental EU 1H with Major xHMA+: 144-144, Flat market 13, Distance multiplier 3.6, with 2nd order activated. Kiwi was a bit surprising for me. It's flat market is effectively below 6, with quite far distance zone of 3.5. Probably because I'm using big numbers in adaptive period. --- The result you see in strategy tester report below for EURUSD 15m is using just default settings you see in code, as follow: 0,1 lot for each order (which is the smallest allowed by my broker). No pyramiding. Commission: 0.5 usd per order. Slippage: 3 Opening position is only using basic strategy #1 (RSI exit). Additional exit not activated. Minimum Profit: 1. TP: 3. SL use: Half-distance zone. Max SL: 4.5. Major xHMA+: 172-233. minor xHMA+: 89-121 Distance Zone Multiplier: 2.7 RSI: Standard 14. (From our forward-testing, the difference we get from net profit is because of the spread, our entry isn't exactly at the close/open price. Not so much though, but not the same. If somebody can direct me to any example where we can code our entry via current bid/ask price, that would be awesome!) It's already a long post (sorry), think I'm gonna pause here. Check out the code :) --- DISCLAIMER: Past performance is no guarantee of future results , and so on.. you know the drill ;) Please read whole description first before using, don't take 1-2 paragraph and claim it's the whole logic, you are responsible of your own actions and understanding.
Стратегия Pine Script®
от io72signals
58
Gann RetracementThe indicator is based on W. D. Gann's method of retracement studies. Gann looked at stock retracement action in terms of Halves (1/2), Thirds (1/3, 2/3), Fifths (1/5, 2/5, 3/5, and 4/5) and more importantly the Eighths (1/8, 2/8, 3/8, 4/8, 5/8, 6/8, and 7/8). Needless to say, {2, 3, 5, 8} are the only Fibonacci numbers between 1 to 10. These ratios can easily be visualized in the form of division of a Circle as follows : Divide the circle in 12 equal parts of 30 degree each to produce the Thirds : 30 x 4 = 120 is 1/3 of 360 30 x 8 = 240 is 2/3 of 360 The 30 degree retracement captures fundamental geometric shapes like a regular Triangle (120-240-360), a Square (90-180-270-360), and a regular Hexagon (60-120-180-240-300-360) inscribed inside of the circle. Now, divide the circle in 10 equal parts of 36 degree each to produce the Fifths : 36 x 2 = 72 is 1/5 of 360 36 x 4 = 144 is 2/5 of 360 36 x 6 = 216 is 3/5 of 360 36 x 8 = 288 is 4/5 of 360 where, (72-144-216-288-360) is a regular Pentagon. Finally, divide the circle in 8 equal parts of 45 degree each to produce the Eighths : 45 x 1 = 45 is 1/8 of 360 45 x 2 = 90 is 2/8 of 360 45 x 3 = 135 is 3/8 of 360 45 x 4 = 180 is 4/8 of 360 45 x 5 = 225 is 5/8 of 360 45 x 6 = 270 is 6/8 of 360 45 x 7 = 315 is 7/8 of 360 where, (45-90-135-180-225-270-315-360) is a regular Octagon. How to Use this indicator ? The indicator generates Gann retracement levels between any two significant price points, such as a high and a low. Input : Swing High (significant high price point, such as a top) Swing Low (significant low price point, such as a bottom) Degree (degree of retracement) Output : Gann retracement levels (color coded as follows) : Swing High and Swing Low (BLUE) 50% retracement (ORANGE) Retracements between Swing Low and 50% level (RED) Retracements between 50% level and Swing High (LIME)
Индикатор Pine Script®
от MoneyNaad
4
trend Screener downtrendthis is in continuation with - previous trend screener i have published, In this code only downtrend screener is there ,This is type of custom screener I searched and made to screen bulk stocks any one can modify it, other may get help out of it. you can change or add new symbol in input section. in my code i have made defined and printed last close price when downtrend was true. 1. downtrend = ema (close,55)< ema (close,144) and ema (close,144)< ema (close,388) and ema (close,388)<ema(close,576) and close<ema(close,388) if the indicator is printing DOWNTREND=TRUE or UPTREND=TRUE then the corresponding stock is in currently in that trend out of the stocks listed in the code in one code only 40 (max) stocks can be called. to add more stocks I copied same code and changed the stocks in the code, now you can screen 80 stocks at a time. This code runs on each bar and checks if the stocks is in uptrend or down trend. you can customize this screener according to your requirement.
Стратегия Pine Script®
от TJalam
17
Aroon Oscillator StrategyThis is simple strategy based on Aroon Oscillator. I have found that using length 144 or 169 on hourly chart shows excellent results. Tested on SPY , QQQ and AAPL. Especially when you look at AAPL results , it has 60% profitable in recent trades. ( Dont assume this will be same for other stocks or ETFs) Aroon Oscillator setting : 169 ( 169 is square root of 13 ... you can also use fib level 144 , which is square root of 12 ) BUY When Aroon Oscillator crosses above zero line Add if Long position is already opened, and current close is less than BUY price and RSI 13 crossing above 30 line Exit when Aroon Oscialltor crosses below zero line Stop Loss default stop loss has been set to 5% Note: I have not plotted RSI to the chart. Please include RSI 13 to see how position gets added ... Also add ema 169 to see how the price is aligned with the Aroon Oscillator Warning For the educational purposes only
Стратегия Pine Script®
от eemani123
9
Welles Wilder MA [MX]The average of 34 periods I observe as a mobile S/R, but I usually observe it more when it is in strong trend, and the average of 72 and 89 as trend dictators, if the asset is above them = Bullish , below = Bearish , and the 144 average as the last moving S/R, and also as an S/R even stronger than all other MAs and when the asset loses that average, I see it as final confirmation of the other previous averages. I give more importance to the average of 89 periods than to 72, because I see it as an extension to the average of 72, as if it were a trend range. for those who prefer to observe the crossing of short and long averages as a way to see the trend, I also left this option, although I do not use ////////////////////////////// A média de 34 periodos eu observo como um S/R móvel, mas eu costumo observar ela mais quando está em forte tendência, estando bem bearish ou jeffish, e a média de 72 e 89 como ditadoras de tendência, se o ativo está acima delas = Bullish , abaixo = Bearish , e a média de 144 como o último S/R móvel, e também como um S/R ainda mais forte que todas as outras MA's e quando o ativo perde essa média, eu vejo como confirmação final das outras médias anteriores. Eu dou mais importância a média de 89 períodos do que a de 72, porque eu vejo ela como uma extensão a média de 72, como se fosse um range de tendência. para quem prefere observar o cruzamento das médias curtas com as longas como forma de ver a tendência, eu deixei também essa opção, embora eu não use
Индикатор Pine Script®
от Marqx
8
Rally SequencesAnother simple indicator that you can use to get to know the major trends and bull markets. It only uses 4 different exponential moving averages. These are (55, 89, 144, 233) The correct alignment you should see on the screen should be from top to bottom and from small to large. Example: 55 should be at the top and 89, 144 and 233 below, respectively. When you see this sequence, it is simple to realize that you are in a major rising trend. Monthly, weekly, daily and 4-hour periods are ideal. Less than 4 hours, deviations are possible.
Индикатор Pine Script®
от trade-istanbul
Phicube EMASAR ( EMA Support and Resistance )Indicator based on the Concept created by Bo Williams. But unlike the original that uses MIMAs, EMAs are used here. Exponential moving averages will be shown according to fractal alignment, in order to show the important support and resistance levels ( SAR ). When the fractals are aligned to become support, we will have the EMA in the graph with a bright color. When the fractals are aligned to become resistance, we will have EMA in the graph with a matte color. Available exponential moving averages: 17,34,72,144,305,610,1292 and 2584 ____________________________________________________//_____________________________________________________________________ Indicador baseado no Conceito criado pelo Bo Williams. Mas diferente do original que utiliza MIMAs, aqui é utilizado EMAs. As médias móveis exponenciais serão mostradas de acordo com o alinhamento dos fractais, com objetivo de mostrar os níveis importantes de suporte e resistência( SAR ). Quando estiver com os fractais alinhados virando suporte, teremos no gráfico a EMA com uma cor em tom brilhante. Quando estiver com os fractais alinhados virando resistência, teremos no gráfico a EMA com uma cor em tom fosco. Médias móveis exponenciais disponíveis: 17,34,72,144,305,610,1292 e 2584
Индикатор Pine Script®
от Coringa
4
Trade System Crypto InvestidorTrade System created to facilitate the visualization of crossing and extensions of the movements with Bollinger bands. Composed by: Moving Averages of 21, 50, 100 and 200. Exponential Moving Averages: 17,34,72,144, 200 and 610. Bollinger bands with standard deviation 2 and 3. How it works? The indicators work together, however there are some important cross-averages that need to be identified. - Crossing the MA21 with 50, 100 and 200 up or down will dictate an up or down trend. - MA200 and EMA200 are excellent indicators of resistance and support zone, if the price is above these averages it will be a great support, if the price is below these averages it will indicate strong resistance. - Another important crossover refers to exponential moving averages of 17 to 72 indicates a possible start of a trend - The crossing of the exponential moving average of 34 with 144 will confirm the crossing mentioned above. - In addition, the exponential moving average of 610 used by Bo Williams is an excellent reference for dictating an upward or downward trend, if the price is above it it will possibly confirm an upward trend and the downside. - To conclude we have bollinger bands with standard deviation 2 and 3, they help to identify the maximum movements.
Индикатор Pine Script®
от CryptoInvestidor
45
Fibonacci Moving Average (EMA/SMA) Bundle //@v1.2 Fibonacci Moving Average (EMA/SMA) Bundle //By Tantamount //Save your TV indicator use counts by using the Fibonacci SMA/EMA all in one indicator! Toggle between Exponetial or Simple moving averages functionality, using Fibonacci the sequence. //Fib moving averages are very good at locating support and resistance zones on multiple time frames. //Customize and or input your very own moving average nomenclature by simply changing the input options from default: SMA (21, 55, 89, 144, 233) or EMA (21, 55, 89, 144, 233) Example: (8,13,21,55,89) Support and Resistance Lines
Индикатор Pine Script®
от tantamount
1
Trend CandlesTrend Candles Overview The Trend Candles indicator is a simple yet effective tool designed to help traders visually identify the prevailing market trend. By combining candle coloring with a trend-based Exponential Moving Average (EMA), it enhances chart readability and makes trend-following strategies easier to apply. Concepts Exponential Moving Average (EMA): The EMA is a moving average that places more weight on recent price data. It reacts faster to price changes compared to a Simple Moving Average (SMA), making it well-suited for trend detection. Trend Determination: - If the EMA is rising (current EMA > previous EMA), the market is considered bullish. - If the EMA is falling (current EMA < previous EMA), the market is considered bearish. - If the EMA is flat (no significant change), no trend color is applied. Candle Coloring: - Green candles = Uptrend - Purple candles = Downtrend - Default candles = Sideways/Flat EMA Features - Trend Visualization: Candles automatically change color based on EMA slope, making it easy to spot bullish and bearish phases. - Customizable EMA Length: The trader can set the EMA period (default is 50), allowing flexibility for short-term or long-term trend analysis. - Overlay EMA Line: An orange EMA line is plotted on the chart for additional confirmation of the trend. - Clean & Minimalist: Focuses on trend clarity without cluttering the chart with unnecessary signals. How to Use 1. Apply the indicator to your chart. 2. Adjust the EMA Length as per your trading style (shorter = faster signals, longer = smoother trend). 3. Follow the candle color: - Green = Favor long entries. - Purple = Favor short entries. - No color = Stay cautious, as trend is unclear. 4. Use with other confirmation tools (support/resistance, volume, or oscillators). 5. Users are encouraged to experiment with different EMA lengths. The default length is 50, but you can explore other values based on your needs. In particular, try Fibonacci numbers such as 13, 21, 34, 55, 89, 144, and 233 to observe how trends behave differently. Disclaimer The information provided by the Trend Candles indicator is for educational purposes only. It should not be considered financial advice. Trading involves substantial risk, and past performance is not necessarily indicative of future results. Always do your own research and use risk management practices.
Индикатор Pine Script®
от moneypots
Vegas Tunnel StrategyVegas Tunnel Strategy is a trend-following breakout system based on exponential moving averages (EMAs). It uses a "tunnel" formed by the 144 EMA and 169 EMA to identify the market's long-term trend direction. Entry signals are generated when a shorter-term EMA (12 EMA) breaks above or below this tunnel, confirming momentum alignment. Long Setup: Price and EMA12 are above the tunnel (EMA144 < EMA169); entry on pullback near the tunnel. Short Setup: Price and EMA12 are below the tunnel (EMA144 > EMA169); entry on rebound near the tunnel. Exit Rules: Fixed stop loss below/above the tunnel or based on ATR; take profit at 1.5–2× the risk. This strategy works best on 4H or daily charts and is suitable for trending assets like FX pairs, gold, oil, or indices.
Стратегия Pine Script®
от xandrea710
The Kyber Cell's – TTM Wave CThe Kyber Cell’s Wave C – TTM Squeeze Macro Bias & Structural Filter ⸻ 1. Introduction Wave C is the strategic compass in the TTM Squeeze Wave system — the final layer that helps you align with the larger trend or macro context. While Wave A delivers momentum bursts and Wave B confirms active trend direction, Wave C filters trades through a broader lens, helping you avoid taking strong intraday setups that go against the dominant structure. Wave C is designed to act as your macro bias validator — filtering out trades that contradict higher-timeframe flows or major moving average slopes. When all three waves line up, you’re no longer just reacting to signals — you’re trading with intention and structure. When in doubt, zoom out and that is what Wave C gives you. ⸻ 2. Core Concept and Calculation Wave C is built to measure high-level trend bias, either on the current chart timeframe or derived from a higher timeframe (HTF). Its logic is based on one or more of the following structural tools: • Long-term EMA slope (e.g., 55, 89, or 200 EMA) • HTF VWAP positioning (price above or below) • Long-period HMA slope (e.g., HMA 144 or HMA 233) • Directional bias from HTF TTM Squeeze or MTF trend engine Unlike Wave A and B, which may fluctuate during normal price swings, Wave C changes more slowly. That’s the point — it gives a “big picture” backdrop against which all lower-level signals should be evaluated. It reduces false positives and helps you wait for trades in the direction of the broader trend. ⸻ 3. Visual Output and Color Logic Wave C uses a simple and deliberate color scheme to communicate macro alignment: • Green: Bullish macro structure • Red: Bearish macro structure • Gray: Neutral, indecisive, or flat macro trend This muted but firm logic encourages patient, structured trading. The goal isn’t to trigger trades directly from Wave C, but to filter out trades that contradict market posture. • When Wave C is Green, you ideally want Wave B to be blue and Wave A to turn cyan before going long. • When Wave C is Red, you look for Wave B to be red and Wave A to turn bright red before shorting. • If Wave C is Gray, it may signal choppy, indecisive structure — use caution or reduce trade size. ⸻ 4. Ideal Use Case Wave C functions as your global bias filter: 1. Set your directional bias for the session or week. 2. Only take trades that agree with Wave C direction. 3. When all waves align, trade with size and confidence. 4. When Wave C disagrees, wait or downshift your trade plan. This makes Wave C especially valuable for swing traders, position traders, or intraday traders who want to anchor their entries within a broader trend. ⸻ 5. Configuration and Customization Wave C is built with advanced users in mind, and its configuration allows multiple structural methods: • EMA Slope Method: Set EMA length and threshold angle • HTF Source Method: Request HTF data for squeeze trend, VWAP, or Wave B analog • HMA Trend Filter: Longer-term smoothing to detect sustained directional flow • Color Preferences: Customize green/red/gray scheme as needed This flexibility allows you to tailor Wave C to your strategy — whether you’re anchoring to a Daily EMA while scalping the 5-minute chart, or aligning swing entries with the Weekly VWAP. ⸻ 6. Alerts and Add-ons Although Wave C isn’t typically used for alerts, it can be incorporated into confluence-based alert stacks. For example: • Alert only when Wave C = Green, Wave B = Blue, and Wave A = Rising • Alert on macro flip (e.g., Green → Red) as a possible regime change • Alert when macro bias agrees with MTF Squeeze Panel bias These setups are more advanced but help automate disciplined trade selection. ⸻ 7. Disclaimer This indicator is for educational and research purposes only. It is not trading advice. Wave C is most effective when used in conjunction with Wave A, Wave B, and other structural context. All trades should be executed with proper risk management and backtested methodology.
Индикатор Pine Script®
от The_Kyber_Cell
The Kyber Cell's – TTM Wave BKyber Cell’s Wave B – TTM Squeeze Trend Confirmation Histogram ⸻ 1. Introduction Wave B acts as the trend validator in the TTM Squeeze suite. While Wave A reveals the heartbeat of momentum, Wave B focuses on the directional stability of price. It answers a critical question for traders: Is the trend in my favor, or am I trading against the dominant force? Built for confirming entries and filtering out low-probability setups, Kyber Cell’s Wave B applies a smoother, more deliberate view of trend structure using configurable moving average logic. This makes it ideal for preventing false starts and improving trade alignment — particularly in combination with Wave A and squeeze-fire signals. ⸻ 2. Core Concept and Calculation Unlike Wave A, which tracks short-term price bursts, Wave B focuses on trend direction and consistency. It typically derives its signal from one of two engines: • EMA-Based Method: Compares short-term EMA (e.g., 8) to a longer EMA (e.g., 21) to determine directional bias. • HMA-Based Method: Measures slope and crossover behavior between fast and slow Hull Moving Averages (e.g., HMA 34 and HMA 144) for a smoother trend read. These calculations produce a histogram that doesn’t fluctuate rapidly like Wave A, but instead stabilizes around sustained trend strength. As such, Wave B excels at confirming whether a move has backing from the broader market structure. ⸻ 3. Visual Output and Color Logic Wave B uses a 3-color histogram to clearly define trend state: • Bright Blue: Bullish trend • Bright Red: Bearish trend • Gray: Neutral or transitioning state (indecision) This simplified color scheme helps traders avoid information overload and focus on whether the market is structurally aligned for long or short entries. • When paired with a squeeze-fire and rising Wave A, a blue Wave B bar signals strong confirmation to go long. • Conversely, a red Wave B bar during a squeeze-fire and falling Wave A confirms bearish setups. • A gray bar typically signals trend conflict, indecision, or transitional environments — and should be treated as a caution flag. ⸻ 4. Ideal Use Case Wave B is best used as a filter and confirmation layer in your trading workflow: 1. Identify a squeeze setup (using Squeeze Pro or dots indicator). 2. Confirm with Wave A: Look for a fresh momentum push (cyan or red bars). 3. Validate with Wave B: • Only take long trades when Wave B is blue. • Only take short trades when Wave B is red. • Avoid or delay trades when Wave B is gray. 4. Ride the trend until Wave B flips or Wave A fades. This reduces emotional decision-making and keeps your trades aligned with the prevailing bias, especially on higher timeframes or in choppy conditions. ⸻ 5. Configuration and Customization Wave B is designed with enough flexibility to adapt to different trading styles while remaining streamlined: • Trend Engine Selection: Choose between EMA-based or HMA-based logic. • Moving Average Lengths: Customize the short- and long-term periods. • Color Customization: Adjust bar colors to match your chart theme or visibility needs. • Bar Thickness and Positioning: Optional visual tweaks depending on your chart layout. The goal is to provide just enough configurability to integrate seamlessly with Wave A and Squeeze Pro, without diluting the core purpose: trend clarity. ⸻ 6. Alerts and Add-ons Wave B can be extended with basic or advanced alerts, depending on your needs: • Alert on trend flips (blue → red or red → blue) • Alert on return to neutral (gray bars) • Combined alerts with squeeze and momentum signals for high-confluence trades When integrated with other components, Wave B becomes an essential part of a multi-layered confirmation system. ⸻ 7. Disclaimer This indicator is provided for educational purposes only and is not financial advice. No trading decision should be made solely on the basis of this tool. All users should test their strategies, assess their own risk tolerance, and consider using Wave B as part of a broader technical framework.
Индикатор Pine Script®
от The_Kyber_Cell
Staccked SMA - Regime Switching & Persistance StatisticsThis indicator is designed to identify the prevailing market regime by analyzing the behavior of a "stack" of Simple Moving Averages (SMAs). It helps you understand whether the market is currently trending, mean-reverting, or moving randomly. Core Concept: SMA Correlation At its heart, the indicator examines the relationship between a set of nine SMAs with different lengths (3, 5, 8, 13, 21, 34, 55, 89, 144) and the lengths themselves. In a strong trending market (either up or down), the SMAs will be neatly "stacked" in order of their length. The shortest SMA will be furthest from the longest SMA, creating a strong, almost linear visual pattern. When we measure the statistical correlation between the SMA values and their corresponding lengths, we get a value close to +1 (perfect uptrend stack) or -1 (perfect downtrend stack). The absolute value of this correlation will be very high (close to 1). In a mean-reverting or sideways market, the SMAs will be tangled and crisscrossing each other. There is no clear order, and the relationship between an SMA's length and its price value is weak. The correlation will be close to 0. This indicator calculates this Pearson correlation on every bar, giving a continuous measure of how ordered or "trendy" the SMAs are. An absolute correlation above 0.8 is considered strongly trending, while a value between 0.4 and 0.8 suggests a mean-reverting character. Below 0.4, the market is likely random or choppy. Regime Classification and Statistics The indicator doesn't just look at the current correlation; it analyzes its behavior over a user-defined lookback window (default is 252 bars) to classify the overall market "regime." It presents its findings in a clear table: 📊 |SMA Correlation| Regime Table: This main table provides a snapshot of the current market character. Median: Shows the median absolute correlation over the lookback period, giving a central tendency of the market's behavior. % > 0.80: The percentage of time the market was in a strong trend during the lookback period. % < 0.80 & > 0.40: The percentage of time the market showed mean-reverting characteristics. 🧠 Regime: The final classification. It's labeled "📈 Trend-Dominant" if the median correlation is high and it has spent a significant portion of the time trending. It's labeled "🔄 Mean-Reverting" if the median is in the middle range and it has spent significant time in that state. Otherwise, it's considered "⚖️ Random/ Choppy". 📐 Regime Significance: This tells you how statistically confident you can be in the current regime classification, using a Z-score to compare its occurrence against random chance. ⭐⭐⭐ indicates high confidence (99%), while "❌ Not Significant" means the pattern could be random. Regime Transition Probabilities Optionally, a second table can be displayed that shows the historical probability of the market transitioning from one regime to another over different time horizons (t+5, t+10, t+15, and t+20 bars). 📈 → 🔄 → ⚖️ Transition Table: This table answers questions like, "If the market is trending now (From: 📈), what is the probability it will be mean-reverting (→ 🔄) in 10 bars?" This provides powerful insights into the market's cyclical nature, helping you anticipate future behavior based on past patterns. For example, you might find that after a period of strong trending, a transition to a choppy state is more likely than a direct switch to a mean-reverting Indicator Settings Lookback Window for Regime Classification: This sets the number of recent bars (default is 252) the script analyzes to determine the current market regime (Trending, Mean-Reverting, or Random). A larger number provides a more stable, long-term view, while a smaller number makes the classification more sensitive to recent price action. Show Regime Transition Table: A simple toggle (on/off) to show or hide the table that displays the probabilities of the market switching from one regime to another. Lookback Offset for Starting Regime: This determines the "starting point" in the past for calculating regime transitions. The default is 20 bars ago. The script looks at the regime at this point and then checks what it became at later points. Step 1, 2, 3, 4 Offset (bars): These define the future time intervals (5, 10, 15, and 20 bars by default) for the transition probability table. For example, the script checks the regime at the "Lookback Offset" and then sees what it transitioned to 5, 10, 15, and 20 bars later. Significance Filter Settings Use Regime Significance Filter: When enabled, this filter ensures that the regime transition statistics only count transitions that were "statistically significant." This helps to filter out noise and focus on more reliable patterns. Min Stars Required (1=90%, 2=95%, 3=99%): This sets the minimum confidence level required for a regime to be included in the transition statistics when the significance filter is on. 1 ⭐: Requires at least 90% confidence. 2 ⭐⭐: Requires at least 95% confidence (default). 3 ⭐⭐⭐: Requires at least 99% confidence.
Индикатор Pine Script®
от federalTacos5392b
7