Регистрация

Поиск скриптов по запросу "30分钟K线图+交易策略"

US 30 Daily Breakout Strategy The US 30 Daily Breakout Strategy (Single Trade Per Breakout/Breakdown) is a trading approach for the US 30 (Dow Jones Industrial Average) that aims to capture breakout or breakdown moves based on the previous day’s high and low levels. The strategy includes mechanisms to take only one trade per breakout (or breakdown) each day and ensures that each trade is executed only when no other trade is open. Entry Conditions: Long Trade (Breakout): The strategy initiates a long position if the current candle closes above the previous day's high, indicating an upward breakout. Only one breakout trade can occur per day, regardless of whether the price remains above the previous high. Short Trade (Breakdown): The strategy initiates a short position if the current candle closes below the previous day's low, indicating a downward breakdown. Similarly, only one breakdown trade can occur per day. Risk Management: Take Profit and Stop Loss: Each trade has a take profit and stop loss of 50 points, aiming to cap profit and limit loss effectively for each position. Daily Reset Mechanism: At the start of each new day (based on New York time), the strategy resets its flags, allowing it to look for new breakout or breakdown trades. This reset ensures that only one trade can be taken per breakout or breakdown level each day. Execution Logic Flags for Trade Limitation: Flags (breakout_traded and breakdown_traded) are used to ensure only one breakout or breakdown trade is taken per day. These flags reset daily. Dynamic Plotting: The previous day’s high and low are plotted on the chart, providing a visual reference for potential breakout or breakdown levels. Overall Objective This strategy is designed to capture single-directional daily moves by identifying significant breakouts or breakdowns beyond the previous day’s range. The fixed profit and loss limits ensure the trades are managed with controlled risk, while the daily reset feature prevents overtrading and limits each trade opportunity to one breakout and one breakdown attempt per day.
Стратегия Pine Script®
от yavanmahur
Gold scalper 1 min or 30 secThis Pine Script code for TradingView is designed to create a trading indicator titled "Gold scalper 1 min or 30 sec." The indicator is primarily used for scalping gold and is focused on short-term timeframes (1 minute or 30 seconds). ### Key Components of the Code: 1. **Inputs:** - **Resolution:** Users can set the timeframe for analysis (default is 240 minutes). - **SMA (Simple Moving Average):** Users can specify the period for the SMA used in the calculations. 2. **Daily Highs and Lows:** - The script calculates the previous day’s high (`yesterdayHigh`) and low (`yesterdayLow`) prices using the `request.security` function. 3. **SMA Calculation:** - An SMA is computed based on the closing prices of the selected timeframe. 4. **Breakout Conditions:** - The script detects breakouts using the SMA in relation to yesterday's high and low: - A breakout upwards occurs when the SMA crosses above the previous day's high. - A breakout downwards occurs when the SMA crosses below the previous day's low. 5. **RSI (Relative Strength Index) Calculations:** - Two RSI values are calculated to assess market momentum: - **Banker RSI:** Used for buy conditions. - **Hot Money RSI:** Used for sell conditions. - These include adjustable sensitivity factors and periods to customize the indicator’s sensitivity. 6. **Trade Direction Selection:** - Users can select whether to trade long, short, or both directions. 7. **Buy and Sell Signals:** - Buy conditions are set when the Retail Moving Average crosses the Banker Moving Average under certain conditions. - Sell conditions are marked when the Banker Moving Average crosses under the specified sell threshold. - These signals are visually represented on the chart with specific shapes (up arrows for buys and down arrows for sells). 8. **Alerts:** - Alerts are generated for buy and sell signals to notify users when certain conditions are met. 9. **Trend Visualization:** - The script visually indicates uptrends and downtrends on the chart by plotting colors based on the relationship between the current price, yesterday's high, and low. ### General Purpose: This indicator is designed to assist traders in identifying potential buying and selling opportunities in the gold market based on short-term price movements and momentum indicators, helping them capitalize on quick price fluctuations that are characteristic of scalping strategies.
Индикатор Pine Script®
от GodeyeThelasthope
4
Stan Weinstein 30-week Moving AverageStan Weinstein's book 'Secrets for Profiting in Bull and Bear Markets' is without doubt one of the classics books traders read. Weinstein said that at any one point in time, a stock (or an index) will be in one of four market "stages": Stage 1 the Basing Area (also known as consolidation or accumulation phase) Stage 2 the Advancing Stage Stage 3 the Top Area (also known as the distribution phase), or Stage 4 the Declining Stage One of the concepts from the book that became classic is the definition of the four stages a stock can be in. These stages basically classify the different periods in the lifetime of a stock. An important thing to understand is that Weinstein uses weekly charts and identifies the current stage based on the direction on the 30 week moving average. This script plots the 30 week moving average and the 150 day moving average.
Индикатор Pine Script®
от marcellagerwerf
6
Multi-Exchange Volume (30 Tickers) by kurtsmock + BV + rVolauthor: kurtsmock Fully Customizable ticker set. Up to 30 Tickers. Bitcoin set as default. -- IMPORTANT NOTE: -- 30 Exchanges are a lot. It can take a while to load. You can fully customize this indicator to your liking. Here's how: 1. Load indicator 2. Open Settings 3. Uncheck the switch box for exchanges you want unincluded 4. At the bottom of the settings menu click "Defaults" and hit "Save as Default" 5. To turn them all back on, hit "Reset Settings" in that same "Defaults" menu and click "Save as Default" again. Also, you don't have to use this with Bitcoin. This works with any asset, just change the ticker in the settings. There's a lot going on with this indicator so the following is descriptions and instructions to help you better understand what's going on here. Thanks! Goal: - To provide a mechanism for assets on multiple exchanges to have their volume evaluated together Edge: - Having better and more complete volume information Notes: - The Default Exchanges for this indicator are highest volume bitcoin exchanges, but may contain "fake volume" - Indicator is set for Bitcoin by default. However, you can change the tickers to reflect any asset you want ////// rVol ////// Goal: - To understand how much volume is being executed relative to the same candle on previous days/periods Edge: - Higher rVol implies higher volatility and market interest. - High rVol = higher than average volume . Markets move on volume so higher than average volume indicates increased market activity/volatility - rVol is an indirect measure of active or anticipated volatility Definitions: - rVol: The volume of a period compared to the Average Volume of that same period in past sessions - Important to note it does NOT add up the last 10 (default) candles, but rather the last 10 candles at session intervals. - Example: -- On a Tuesday, 1h chart it will add up the last ten Tuesday, 9:00 am candles, not including the current, active candle. -- It then averages those lookback candles. -- It then plots the percentage relationship between the most recent candle and the average of the lookback candles -- Avg Vol of Lookback candles = 5000, -- Volume of most recent candle = 4000: Output = rVol = 80: -- Volume of most recent candle was 80% of the average volume in the 9 am time period of the last ten Tuesdays in the 9 am, 1h period Notes: - rVol does not add current candle volume into lookback sum. So, you set lookback to be: (not including the current day) - rVol is on a switch. So, if you want to see rVol instead of volume, hit the switch in the settings - If you want to see both, load 2 instances of the indicator. ////// Better-er Volume ////// Goal: To Identify: - When a candle closes at the highest volume * range relative to the lookback period and close > open - When a candle closes at the highest volume * range relative to the lookback period and close < open - When a candle closes at the highest volume / price relative to the lookback period Edge: - Identifies beginnings of price expansion, climax of price expansion, breakouts, pivots, and take profit points on the volume chart Notes: - Based generally on Barry Taylor's "Better Volume" indicator and ideas from Pascal Willain's book "Value in Time." - Better-er Volume rules are applied to both Total Volume or rVol. -- When rVol is displayed Better-er Volume is applied to rVol -- When Total Volume is displayed Better-er Volume is applied to Total Volume // Plot Key: // Green Triangle Up = Often marks the beginning and/or end of price expansion to the upside Red Triangle Up = Often marks the beginning and/or end of price expansion to the downside Yellow Square = High Volume but Tight Range. Implies a Battle of Bulls and Bears. High Liquidity area. Provided Liquidity is not enough to move price. Thick Limit Order Book. Purple Triangle Up or Down = Implies high market participation. Typically at the end of expansion when very significant s/r is hit category: volume Volatility tags: Volume rVol relativevolume Bitcoin cryptocurrency bettervolume Many More Volume Indicators Coming Out Soon!
Индикатор Pine Script®
от kurtsmock
1
[naoligo] 12x MA DT (5, 15, 30 & 60)This indicator is based on "Generic 8x MA Plotter", by @LazyBear. It is also based on my own indicator "10x MA (H, D, W, M)", which is good for Swing Trading and/or Position. This one is focused in daytrade and it will plot three Moving Averages based on current time interval (under 5 minutes) and nine based on chosen periods by 5, 15, 30 and 60 minutes. You will be able to see where is, for example, a 50 period's SMA of 15 minutes when using a 2 minutes time interval chart. I find it very useful to analyze, in a snap, possible price ranges and enter/exit points. All reference values are from setups known and used by daytraders. you can choose between EMA or SMA (default: SMA) for each time interval, that are distributed in: 3x MA current time interval; 3x MA 5 minutes; 2x MA 15 minutes; 2x MA 30 minutes; 2x MA 60 minutes. I've tried to keep the code as simple as possible, so you can increase the number of MA or modify the type for each time interval. Cons: Use it wisely, because if you choose to plot all the 12 Moving Averages, it will may consume a lot of your navigator resources. Enjoy!
Индикатор Pine Script®
от naoligo
2
NY Session Candle (09:30-16:00 ET, Mon-Fri)This indicator plots one synthetic candle per day that represents the official New York trading session (09:30–16:00 ET). It aggregates the open, high, low, and close across the entire session and draws a single candle on your chart, making it easier to compare session ranges, direction, make studies and volatility. Features: -Aggregates intraday OHLC into one candle per session. -Colors the candle green/red depending on close vs. open. -Excludes weekends (Sat/Sun) automatically. -Adjustable timezone and session window in settings. Use case: Helps traders visually analyze how each New York session behaved without changing chart timeframes. It is a visualization tool only and does not generate trading signals or predictions. Notes: The script does not repaint and does not use lookahead. The candle of the session only shows once the FULL session is closed, it is not a dynamic candle. It is for analysis purposes only, not a trading strategy. Original code and idea; no third-party scripts reused
Индикатор Pine Script®
от sabinaGM
Daily Open Line (9:30-16:00)This indicator automatically plots a horizontal line at each day's opening price during regular trading hours (9:30 AM to 4:00 PM, US Eastern Time). The line starts exactly at the opening bar of the day and ends at the close (16:00). Each day, a new line is drawn, making it easy to visualize and reference the daily open price throughout the session. Useful for intraday traders to identify key support/resistance and monitor price action relative to the open. You can customize the color, line width, and whether to display the open price label.
Индикатор Pine Script®
от ziaZNZ
Previous Day Close and Average VWAP value, Current Day 30 min HLThe code provided is a TradingView Pine Script that creates a combined indicator consisting of two separate components: Indicator 1: Plot Lines with VWAP This component plots lines on the chart using two different colors and widths. It uses a custom function f_newLine to create a new line object with a specified color and width. It uses another custom function f_moveLine to move a line to a specific location on the chart. The line_close line is moved to a specific date and closing price. The line_vwap line represents the VWAP (Volume Weighted Average Price) and is plotted using the line.new function. The VWAP calculation is performed using the typical price (average of high, low, and close) and volume. The VWAP is plotted on the chart using the plot function. The previous day's VWAP is also plotted and connected to the current day's VWAP with a line. Indicator 2: 30 Min high and low breakout This component identifies a specific time range ("0915-0945") within each trading day. It uses the ta.valuewhen function to find the highest and lowest prices during that time range. The highest price is stored in the high_thirtymin variable, and the lowest price is stored in the low_thirtymin variable. These prices are plotted on the chart as circles, with green representing the high and red representing the low. The indicator combines these two components to provide visual information about the VWAP and the high/low breakout within a specific time range. The code also includes some additional logic to handle barstate and ensure correct calculations and plotting.
Индикатор Pine Script®
от siddarthshrikhande
5