Регистрация

Поиск скриптов по запросу "entry"

GAURs Polynomial Regression ChannelsThanks to The Sweet Lord , here is the Gaur's Polynomial Regression Channel. Its a Polynomial Regression Channel but applied a little differently. Wont go into technical details much. Overview of options is as follows- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Channel Options - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1. Degree of Polynomial: 1/2/3 Default = 3 Defines the degree of polynomials - 1,2,3. Note here, degree 1 will not be a straight line since its applied differently. Try different degrees for different fits and market conditions. 2. Channel Length: Default 30 (candles) You can go beyond 100 or 200 candle lengths but smaller is the usual preference of Poly-Reg-channel traders. It all depends on market conditions and your style of trading. Do your research. I am usually comfortable with a range of 20-50 (in crypto markets). 3. Basis of Channel height/boundries: ATR/Manual Default: ATR ATR provides a dynamically adjusted entry/exit bounds of the channels. As ATR changes, the channel bounds also changes its height. It can also be fixed manually. Manual heights wont change automatically. 4. Basis of Y-Value: open/close/ sma / ema / wma /hilow Default: close Y- value is the y value of the (x,y) coordinates used while calculating the regression coefficients. Dont worry about it, its nothing serious. 5. Apply channel smoothning using sma?: Yes/No Default: Yes Without smoothning, the channel does not "look" good. 6. Shaded Area Height Percentage: Its the extra margin for the channel. Its in percentage of the total height (defined 3 above) of channels. The shaded area provides an extra allowance for your entries or exits beyond the ATR or manual heights. 7. Plot RSI?: Yes/No Default: Yes Plots RSI (orange line in between the channel - its different from the dotted center line) considering the downbound of channels as 0 (oversold) and upbound of channels as 100 (overbought) 8. Plot 200 sma?: Yes/No Default: Yes It plots a 200 period fast (green) and 225 period slow (red) sma . I usually use two MAs. Its visually very easy to understand. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Sample Strategy - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - You can develop your own strategy with the channels. But following is just one of the ways you can trade. Best Application: Ranging markets. But can be happily used in volatile conditions, with a little experience. 1. SMA: -- (this condition is optional really) If green (200) is above red (225) go only long. If red is above green go only short. Defines long term trend of the market. 2. Channel slope: -- (this stuff needs practice/experience) Depending on the channel slope, like if its tending to go up or down, you can choose to take only short or long trades. It defines short term momentum of the market. 3. ATR based heights: Since its ATR based, the channel height are our natural entry and exit points. Long: When price touches lower shaded area, consider possible long entry. Exit on price entering the upper shaded area. Short: Enter on upper bound shaded area, exit on lower. 4. RSI: For additional conformations. Again note, the RSI considers the lower bound of channel as 0 and upper as 100. But since, the channel moves up and down, the RSI will also move not only as RSI but also with the channel. Meaning, say if the RSI is valued at 50, then it will be near the center of the channel but since the center changes as time and price changes, the RSI valued at 50 at different times will not be at the same horizontal level respect to the graph, although it will be at the same level (center) respect to the channel. 5. PRC Channel Percentage label: This label is at the lower side a bit ahead of the current candle. Provides you info on what is the channel percentage. This is especially helpful in crypto markets to gauge your possible percentage profit where profits can be much higher than forex or other instruments. It can also helps you select a suitable market/instrument if the channels are based on ATR. 6. Extra indicators: I usually use stochastic along with this setup for extra conformations. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Donate - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Use freely and donate generously if you find value. Your help will really help. I had earlier provided BTC addresses for donations but it seems to violate TV House rules. Hope they make TV coins redeemable in future. - Pranav Joshi - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Extra Info - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - // © cpranavjoshi // special thanks to the "Trading View" people for providing this great platform for free // ------------------------ // MATH // ------------------------ // special thanks to an article on the web that provided layman friendly explanation of the maths // unfortunately i wont be able to provide the link to that article owing to TV restrictions, though i sincerely would have liked to credit the author. // Google search this phrase, and you should be able to get it in one of the first results - "polynomialregression Mathematics of Polynomial Regression" // my regression math calculation is a further resolution upon the generalized matrix formula given in the that article. // the generalized matrix looks scary but in fact its much simpler than one may assume // the summation sign things are just float numbers that can be easily found out // so we get a matrix with number of equations equal to the number of unknowns. // e.g. if its a 3rd degree poly, it has 4 unknowns (c0,c1,c2,c3) with 4 equations as in the generalized matrix // it can be resolved by simple algebra // Note: the results have been verified with excel using same input data points. // pine was difficult for me so i coded it in python first to verify // ------------------------ // WHY // ------------------------ // this script was coded because Pranav badly needed Polynomial channels (had used them in mt4 earlier) // and at the time of this coding, i could not find any readily available script in the trading view public library ( tnx public) // the complex math was probably the hurdle // i m not good in maths, but by the Will of the Lord, i could resolve the issue with simple algebra and logic // ------------------------ // PINE // ------------------------ // i am just an average (even poor probably) programmer and pine script is not my language // this is a humble attempt to write my first pine with whatever i could do quickly // experts - feel free to develop if needed. have used some workarounds in drawings/plottings. rectify them if possible // // // - Pranav Joshi
Индикатор Pine Script®
от cpranavjoshi
2
Ichimoku Cloud LONG and SHORT indicatorsThis simple script uses 4 rules from Ichimoku Cloud indicator to marks position entry points. The idea is that by entering a long position just when these 4 criteria are met, you can capture a 2-3% plus move within the next few days: 1. The conversion line is above the base line 2. The price is above the clouds 3. The lagging span is above the clouds 4. The rightmost cloud is green The same 4 criteria but inverted will indicate a short entry. In order to avoid 'stale' entries which can lead to chasing, we want the price and conversion line crossovers to be recent, within the past few days. Ideally we want to enter before close on the day the entry signal is given so that we can capture any potential gap up (or down if short). Often the price will make a nice move the next day or day after. If any of the criteria become invalidated, or if after 4-5 days there hasn't been significant movement, then it was a false alarm. This script will show the basic Ichimoku Cloud indicators, plus labels for bearish and bullish price and conversion line crossovers as well as LONG and SHOT indicators to show when the entry criteria have been met.
Индикатор Pine Script®
от ragnarok628
14
Growth Producer Applicable to FTX:ETHPERP 15 min Relative volatility index (RVI) that will determine the entry and exit points only when the volatility will start to increase and Money Flow index as an additional point for entry. IMPORTANT • Input Partial take profits in your Bot settings • This is a trend strategy and works better in the trending market • We added the trend identifier using the EMA and SMA interaction • We added Take profit and stop loss levels • We added inputs for the period selection, so you could see how the strategy is performing on a monthly basis. • RVI for the entry conditions • MFI was added for the additional entries. • Partial Take-profits
Стратегия Pine Script®
от Wunderbit
8
Percent Calculator OverlayFirst and foremost: I'm inspired to publish my scripts by the other member's who publish quality, detailed scripts -a token of my appreciation and support, Thank You. The percent calculator overlay is an extension of my Percent Calculator indicator that allows one to visualize the percent metrics they're interested in trading: it''s function is to simply output the target price from either the close or ones trade-entry based on a desired percent return on investment (R.O.I.) then plots it on top of the chart as an area plot and notes anytime in the past the desired conditions were met with a {flag "Success"}. Say you want to profit 15% from your entry: open the settings and plug in your entry value and the number 15 into the appropriate settings and the indicator displays what the target price should be (rounded to two decimal places) right on the chart with the area as well as the horizontal line which is enabled by the "track price" setting. The percent calculator overlay also goes one step further by finding the average percent return on investment over a desired interval of time (the default is 20 candles) as well as allows one to adjust the size of the price move the average percent return on investment is being calculated for which is displayed on the chart as circles and also displays a horizontal line for the most current value with the enabled "track price" setting. NOTE: unlike the Percent Calculator the Percent Calculator Overlay creates a visual record of the number of success' the programmed parameters have achieved (based on the closing prices) which self adjusts when the "size of the move" is changed. Say you want to find the average percent return on investment for a 3 candle swing over a 200 candle interval of time: open the settings and plug the number 200 into the interval setting and the number 3 into the price-move setting and the indicator displays what the average 3 candle swing returns on investment and plots what the target price would be to achieve the average return given the current close (or entry price) with the gray circles and the horizontal line enabled with the "track price" setting. Practical Application: comparing ones desired return on investment to the average return on investment can help determine how realistic ones goals are... it's unlikely to achieve 100% return on investment if the average is only around 10% (given the parameters one is working within) but on the other hand achieving 5% return on investment is highly likely. By visualizing roughly how often the given parameters have achieved success on the chart one can become a lot more comfortable, confident, and accurate with their goals. Forward Looking Statement: I believe in the not too distant future plug and play automated trading systems will be made available to the general public. Over the past 4 years we have seen brokers offer free charting software, commission free trading, and now fractional shares; I don't think it will be much longer before we can simply click a few buttons and tell the computer to enter when the stochastic is overbought/sold and exit with a predefined percent gain (and to repeat that process indefinitely). -Imagine the data moving 2-3-4 times a second, the liquidity flowing like Niagara falls, and 95% of the working population not only starting to invest but gains the extra cash flow they desperately need. Beta testing: please comment or send me a message if you happen to stumble over any bugs or have any suggestions for improvement.
Индикатор Pine Script®
от UnknownUnicorn6941191
Percent Calculator (Return On Investment Target Price)First and foremost: I was inspired to publish my first script after reading some of the other member's scripts -a token of my appreciation and support, Thank You. The percent calculator is a very simple and basic indicator to use, it''s function is to simply output the target price from either the close or ones trade-entry based on a desired percent return on investment (R.O.I.). Say you want to profit 15% from your entry: simply plug in your entry value and the number 15 into the appropriate settings and the indicator displays what the target price should be (rounded to two decimal places). The percent calculator also goes one step further by finding the average percent return on investment over a desired interval of time (the default is 20 candles) as well as allows one to adjust the size of the price move the average percent return on investment is being calculated for. Say you want to find the average percent return on investment for a 3 candle swing over a 200 candle interval of time: simply plug the number 200 into the interval setting and the number 3 into the price-move setting and the indicator displays what the average 3 candle swing returns on investment. Practical Application: comparing ones desired return on investment to the average return on investment can help determine how realistic ones goals are... it's unlikely to achieve 100% return on investment if the average is only around 10% (given the parameters one is working within) but on the other hand achieving 5% return on investment is highly likely.
Индикатор Pine Script®
от UnknownUnicorn6941191
1
Short in Bollinger Band Down trend (Weekly and Daily) // © PlanTradePlanMM // 6/14/2020 // --------------------------------------------------- // Name: Short in Bollinger Band Down trend (Weekly and Daily) // --------------------------------------------------- // Key Points in this study: // 1. Short in BB Lower band, probability of price going down is more than 50% // 2. Short at the top 1/4 of Lower band (EMA - Lower line), Stop is EMA, tartget is Lower line; it matches risk:/reward=1:3 naturally // // Draw Lines: // BB Lower : is the Target (Black line) // BB EMA : is the initial Stop (Black line) // ShortLine : EMA - 1/4 of (Stop-target), which matches risk:/reward=1:3 // Prepare Zone : between EMA and ShortLine // shortPrice : Blue dot line only showing when has Short position, Which shows entry price. // StopPrice : Black dot line only showing when has Short position, Which shows updated stop price. // // Add SMA50 to filter the trend. Price <= SMA, allow to short // // What (Condition): in BB down trend band // When (Price action): Price cross below ShortLine; // How (Trading Plan): Short at ShortLine; // Initial Stop is EMA; // Initial Target is BB Lower Line; // FollowUp: if price moves down first, and EMA is below Short Price. Move stop to EMA, At least "make even" in this trade; // if Price touched Short Line again and goes down, new EMA will be the updated stop // // Exit: 1. Initial stop -- "Stop" when down first, Close above stop // 2. Target reached -- "TR" when down quickly, Target reached // 3. make even -- "ME" when small down and up, Exit at Entry Price // 4. Small Winner -- "SM" when EMA below Entry price, Exit when Close above EMA // // -------------- // Because there are too many flags in up trend study already, I created this down trend script separately. // Uptrend study is good for SPY, QQQ, and strong stocks. // Downtrend Study is good for weak ETF, stock, and (-2x, -3x) ETFs, such as FAZ, UVXY, USO, XOP, AAL, CCL // ----------------------------------------------------------------------------------------------------------------- // Back test Weekly and daily chart for SPY, QQQ, XOP, AAL, BA, MMM, FAZ, UVXY // The best sample is FAZ Weekly chart. // When SPY and QQQ are good in long term up trend, these (-2x, -3x) ETFs are always going down in long term. // Some of them are not allowed to short. I used option Put/Put spread for the short entry. //
Индикатор Pine Script®
от PlanTradePlanMM
1
SSL Crossover + MA choiceThis indicator builds on the SSL channel code by ErwinBeckers @ I have added options for diff MA's to be used in the SSL channel and crossover indicators for buy/sell signals default MA is set to Arnaud Legaux, but you can set it to whatever you like - original was a Simple Moving Average by ErwinBeckers The indicator will not repaint as the signals are drawn after close of crossover candles Let me know if you have any suggestions - happy to add more functionality
Индикатор Pine Script®
от Monduras
24
inwCoin Martingale Strategy ( for Bitcoin )** Same as my previous martingale script but this version = opensource ** inwCoin Martingale Strategy is the proof of concept strategy that in the end, anyone who using martingale strategy will kaboom their portfolio. For those who don't know what is "martingale".. it's a simple double down strategy in the hope to cover the loss in previous entry. Example In the game that if you win, you'll get 100% of your bet money back. 1st loss = 1$ 2nd loss = bet 2$ : if win, get 2$ / real profit = 1$ ( 2-1 ) 3rd loss = bet 4$ : if win, get 4$ / real profit = 1$ ( 4 - ( 2+1) ) 4th loss = bet 8$ : if win, get 8$ / real profit = 1$ ( 8 - ( 4+2+1 ) ) ... ... 10th loss = bet 512$ : if win, get 512$ / real profit = 1$ ( 512 - ( 256+128+64+32+16+8+4+2+1) ) as you can see, the next bet will be first bet x 2^(n-1) and the profit will equal to your first bet. ================== In trading and forex EA ( Expert Advisor or bot ) people use this strategy to fool newbies that their martingale system will generate steady income for eternity. But in reality, this strategy will destroy your whole portfolio eventually some time in the future. Because there will be some "Blackswan event" in market at some point in time. And one who ignore this fact, will lose everything. But, if you using low risk strategy and generate some profit from your low-risk portfolio. You can take small chunk of that profit and put it in riskier strategy like this martingale, to accerelate your profit snowball. =================== Parameter Explaination ==================== Price = datasource for indicator calculation Fixed position size option = if uncheck, the "Start position size" parameter will be % of your initial capital. If checked, it will fixed position size ( like 1 BTC ) Start Position Logic = condition to enter first trade - MACD singal > 0 : Self explanatory, default macd value - Stochastic RSI cross up : enter when sto line cross up from bottom ( 20 ) - ATR channel : enter trade if price cross above 2.3 ATR Take Profit Percent = take profit target % from average entry Start martingale ..= if price compare to average position entry less than this %, it will start to double down ( martingale ) Martingale Multiplier = you can specific how big you'll double down, default is 2 Trade Direction = long only for now Use date rang = self explanatory ** make sure to setup your initial capital in properties tab ** On chart ======= White Line = Average position price Orange Line = your current equity If equity less than 0, it will close any remaining positions ( It's mean your position got liquidated ) If price > equity line for "take profit percent" it will close any remaining positions. ======= As you can see, this strategy survive 2018 drop and pump profit to 1000+% ( Check in the strategy tester tab > list of trades ) But in May 2020 -50% drop in just 3 days, your whole portfolio got liquidated. Actually, after some digging in profit and backtest result. This strategy, when it can survive a shape drop, can generate a lot of profit. So, if you want to use martingale. Make sure to use only small chunk of your profit from "low-risk" strategy to accelerate your profit generation ( aka degen port ) DO NOT greedy and use all of your initial capital or borrowed money to use with this strategy!
Стратегия Pine Script®
от Real_inwCoin
11
Generalized SSL by Vts// Generalized SSL: // This is the very first time the SSL indicator, whose acronym I ignore, is on Tradingview. // It is based on moving averages of the highs and lows. // Similar channel indicators can be found, whereas // this one implements the persistency inside the channel, which is rather tricky. // The green line is the base line which decides entries and exits, possibly with trailing stops. // With respect to the original version, here one can play with different moving averages. // The default settings are (10,SMA) // // Vitelot/Yanez/Vts March 2019
Индикатор Pine Script®
от vitelot
11
Waddah Attar Explosion and WaveTrend Oscillator combinedWaddah Attar Explosion by LazyBear and WaveTrend Oscillator by Krypt. All credits goes to LazyBear and Krypt, i have only done some combining with the two indicators, barcolors and BG colors to clarify entrys and exits. Combine with CM_Williams Vix_Fix, Super Guppy R1.0 by JustUncleL and you have a powerful tool. Barcolors to look for Aggressive Buy 1 = Lime Agressive Buy 2 = Aqua Buy = Green Sell 1 = Orange Sell 2 = Red This is my first try, so be nice to me :-)
Индикатор Pine Script®
от gtfalmi
7
Daily ATR%If You are using a percentage of the Daily Average True Range in determining your stop placement, this quick indicator is for You. excerpt from investopedia.com/articles/trading/06/stopplacement.asp ATR % Stop Method The ATR% stop method can be used by any type of trader because the width of the stop is determined by the percentage of average true range (ATR). ATR is a measure of volatility over a specified period of time. The most common length is 14, which is also a common length for oscillators such as the relative strength index (RSI) and stochastics. A higher ATR indicates a more volatile market, while a lower ATR indicates a less volatile market. By using a certain percentage of ATR, you ensure that your stop is dynamic and changes appropriately with market conditions. For example, for the first four months of 2006, the GBP/USD average daily range was around 110 to 140 pips. A day trader may want to use a 10% ATR stop - meaning that the stop is placed 10% x ATR pips from the entry price.In this instance, the stop would be anywhere from 11 to 14 pips from your entry price. A swing trader might use 50% or 100% of ATR as a stop. In May and June of 2006, daily ATR was anywhere from 150 to 180 pips. As such, the day trader with the 10% stop would have stops from entry of 15 to 18 pips while the swing trader with 50% stops would have stops of 75 to 90 pips from entry.
Индикатор Pine Script®
от netixen
1
Fib OscillatorWhat is Fib Oscillator and How to Use it? 🔶 1. Conceptual Overview The Fib Oscillator is a Fibonacci-based relative position oscillator. Instead of measuring momentum (like RSI or MACD), it measures where price currently sits between the recent swing high and swing low, expressed as a percentage within the Fibonacci range. In other words: It answers: “Where is price right now within its most recent dynamic range?” It visualizes retracement and extension zones numerically, providing continuous feedback between 0% and 100% (and beyond if extended). 🔶 2. What the Script Does The indicator: Automatically detects recent high and low levels using an adaptive lookback window, which depends on ATR volatility. Calculates the current price’s position between those levels as a percentage (0–100). Plots that percentage as an oscillator — showing visually whether price is near the top, middle, or bottom of its recent range. Overlays Fibonacci retracement levels (23.6%, 38.2%, 50%, 61.8%, 78.6%) as reference zones. Generates alerts when the oscillator crosses key Fib thresholds — which can signal retracement completion, breakout potential, or pullback exhaustion. 🔶 3. Technical Flow Breakdown (a) Inputs Input Description Default Notes atrLength ATR period used for volatility estimation 14 Used to dynamically tune lookback sensitivity minLookback Minimum lookback window (candles) 20 Ensures stability even in low volatility maxLookback Maximum lookback window 100 Limits over-expansion during high volatility isInverse Inverts chart orientation false Useful for inverse markets (e.g. shorts or inverse BTC view) (b) Volatility-Adaptive Lookback Instead of using a fixed lookback, it calculates: lookback = SMA(ATR,10) / SMA(Close,10) × 500 lookback=SMA(ATR,10)/SMA(Close,10)×500 Then it clamps this between minLookback and maxLookback. This makes the oscillator: More reactive during high volatility (shorter lookback) More stable during calm markets (longer lookback) Essentially, it self-adjusts to market rhythm — you don’t have to constantly tweak lookback manually. (c) High-Low Reference Points It takes the highest and lowest points within the dynamic lookback window. If isInverse = true, it flips the candle logic (useful if viewing inverse instruments like stablecoin pairs or when analyzing bearish setups invertedly). (d) Oscillator Core The main oscillator line: osc = ( close − low ) ( high − low ) × 100 osc= (high−low) (close−low) ​ ×100 0% = Price is at the lookback low. 100% = Price is at the lookback high. 50% = Midpoint (balanced). Between Fibonacci percentages (23.6%, 38.2%, 61.8%, etc.), the oscillator indicates retracement stages. (e) Fibonacci Levels as Reference It overlays horizontal reference lines at: 0%, 23.6%, 38.2%, 50%, 61.8%, 78.6%, 100% These act as support/resistance bands in oscillator space. You can read it similar to how traders use Fibonacci retracements on charts, but compressed into a single line oscillator. (f) Alerts The script includes built-in alert conditions for crossovers at each major Fibonacci level. You can set TradingView alerts such as: “Oscillator crossed above 61.8%” → possible bullish continuation or breakout. “Oscillator crossed below 38.2%” → possible pullback or correction starting. This allows automated monitoring of fib retracement completions without manually drawing fib levels. 🔶 4. How to Use It 🔸 Visual Interpretation Oscillator Value Zone Market Context 0–23.6% Deep Retracement Potential exhaustion of a down-move / early reversal 23.6–38.2% Shallow retracement zone Possible continuation phase 38.2–50% Mid retracement Neutral or indecisive structure 50–61.8% Key pivot region Common trend resumption zone 61.8–78.6% Late retracement Often “last pullback” area 78.6–100% Near high range Possible overextension / profit-taking >100% Range breakout New leg formation / expansion 🔸 Practical Application Steps Load the indicator on your chart (set overlay = false, so it’s below the main price chart). Observe oscillator position relative to fib bands: Use it to determine retracement depth. Combine with structure tools: Trend lines, swing points, or HTF market structure. Use crossovers for timing: Crossing above 61.8% in an uptrend often confirms breakout continuation. Crossing below 38.2% in a downtrend signals renewed downside momentum. For range markets, oscillator swings between 23.6% and 78.6% can define accumulation/distribution boundaries. 🔶 5. When to Use It During Retracements: To gauge how deep the pullback has gone. During Range Markets: To identify relative overbought/oversold positions. Before Breakouts: Crossovers of 61.8% or 78.6% often precede impulsive moves. In Multi-Timeframe Contexts: LTF (15M–1H): Detect intraday retracement exhaustion. HTF (4H–1D): Confirm major range expansions or key reversal zones. 🔶 6. Ideal Companion Indicators The Fib Oscillator works best when contextualized with structure, volatility, and trend bias indicators. Below are optimal pairings: Companion Indicator Purpose Integration Insight Market Structure MTF Tool Identify active trend direction Use Fib Oscillator only in trend direction for cleaner signals EMA Ribbon / Supertrend Trend confirmation Align oscillator crossovers with EMA bias ATR Bands / Volatility Envelope Validate breakout strength If oscillator >78.6% & ATR rising → valid breakout Volume Oscillator Confirm retracement strength Volume contraction + oscillator under 38.2% → potential reversal HTF Fib Retracement Tool Combine LTF oscillator with HTF fib confluence Powerful multi-timeframe setups RSI or Stochastic Measure momentum relative to position RSI divergence while oscillator near 78.6% → exhaustion clue 🔶 7. Understanding the Settings Setting Function Practical Impact ATR Period (14) Controls volatility sampling Higher = smoother lookback adaptation Min Lookback (20) Smallest window allowed Lower = more reactive but noisier Max Lookback (100) Largest window allowed Higher = smoother but slower to react Inverse Candle Chart Flips oscillator vertically Useful when analyzing bearish or inverse scenarios (e.g. short-side fib mapping) Recommended Configs: For scalping/intraday: ATR 10–14, lookback 20–50 For swing/position trading: ATR 14–21, lookback 50–100 🔶 8. Example Trade Logic (Practical Use) Scenario: Uptrend on 4H chart Oscillator drops to below 38.2% → retracement zone Price consolidates → oscillator stabilizes Oscillator crosses above 50% → pullback ending Entry: Long when oscillator crosses above 61.8% Exit: Near 78.6–100% zone or upon divergence with RSI For Short Bias (Inverse Setup): Enable isInverse = true to visually flip the oscillator (so lows become highs). Use the same thresholds inversely. 🔶 9. Strengths & Limitations ✅ Strengths Dynamic, self-adapting to volatility Quantifies Fib retracement as a continuous function Compact oscillator view (no clutter on chart) Works well across all timeframes Compatible with both trending and ranging markets ⚠️ Limitations Doesn’t define trend direction — must be used with structure filters Can whipsaw during choppy consolidations The “lookback auto-adjust” may lag in sudden volatility shifts Shouldn’t be used standalone for entries without structural confluence 🔶 10. Summary The “Fib Oscillator” is a dynamic Fibonacci-relative positioning tool that merges retracement theory with adaptive volatility logic. It gives traders an intuitive, quantified view of where price sits within its recent fib range, allowing anticipation of pullbacks, reversals, or breakout momentum. Think of it as a "Fibonacci RSI", but instead of momentum strength, it shows positional depth — the vibrational location of price within its natural swing cycle.
Индикатор Pine Script®
от TradeMing
DAMMU AUTOMATICAL AI ENRTY AND TARGET AND EXITMain Components Supertrend System – Detects market trend direction (Buy/Sell zones). → Green = Uptrend (Buy) → Red = Downtrend (Sell) SMA Filter – Uses 50 & 200 moving averages to confirm overall trend. → Price above both → Bullish → Price below both → Bearish Buy/Sell Signals – Generated when Supertrend flips direction and SMA confirms. → Triangle up = Buy → Triangle down = Sell Take Profit / Stop Loss Levels – Automatically calculated after Buy/Sell entry. → TP1, TP2, SL shown on chart ADX (Sideways Zone Filter) – If ADX < 25 → Market sideways → Avoid trades Shows “No Trade Zone” area Smart Money Concepts (SMC) Tools – 🔹 Market structure (HH, HL, LH, LL) 🔹 Order blocks (OB) 🔹 Equal highs/lows 🔹 Fair Value Gaps (FVG) 🔹 Premium & Discount zones Helps find institutional entry points Visual Display – Color-coded background (trend zones) Labels for buy/sell/structure Optional FVG and order block boxes Risk Management – Input-based position sizing, SL & TP management (to calculate profit levels and minimize loss)
Индикатор Pine Script®
от dammucool
saodisengxiaoyu-lianghua-2.1- This indicator is a modular, signal-building framework designed to generate long and short signals by combining a chosen leading indicator with selectable confirmation filters. It runs on Pine Script version 5, overlays directly on price, and is built to be highly configurable so traders can tailor the signal logic to their market, timeframe, and trading style. It includes a dashboard to visualize which conditions are active and whether they validate a signal, and it outputs clear buy/sell labels and alert conditions so you can automate or monitor trades with confidence. Core Design - Leading Indicator: You choose one primary signal generator from a broad list (for example, Range Filter, Supertrend, MACD, RSI, Ichimoku, and many others). This serves as the anchor of the system and determines when a preliminary long or short setup exists. - Confirmation Filters: You can enable additional filters that validate the leading signal before it becomes actionable. Each “respect…” input toggles a filter on or off. These filters include popular tools like EMA, 2/3 EMA crosses, RQK (Nadaraya Watson), ADX/DMI, Bollinger-based oscillators, MACD variations, QQE, Hull, VWAP, Choppiness Index, Damiani Volatility, and more. - Signal Expiry: To avoid waiting indefinitely for confirmations, the indicator counts how many consecutive bars the leading condition holds. If confirmations do not align within a defined number of bars, the setup expires. This controls latency and helps reduce late or stale entries. - Alternating Signals: An optional mode enforces alternation (long must follow short and vice versa), helping avoid repeated entries in the same direction without a meaningful reset. - Aggregation Logic: The final long/short conditions are formed by combining the leading condition with all selected confirmation filters through logical conjunction. Only if all enabled filters validate the signal (within expiry constraints) does the indicator consider it a confirmed long or short. - Visualization and Alerts: The script plots buy/sell labels at signal points, provides alert conditions for automation, and displays a compact dashboard summarizing the leading indicator’s status and each confirmation’s pass/fail result using checkmarks. Leading Indicator Options - The indicator includes a very large menu of leading tools, each with its own logic to determine uptrend or downtrend impulses. Highlights include: - Range Filter: Uses a dynamic centerline and bands computed via conditional EMA/SMA and range sizing to define directional movement. It can operate in a default mode or an alternative “DW” mode. - Rational Quadratic Kernel (RQK): Applies a kernel smoothing model (Nadaraya Watson) to detect uptrends and downtrends with a focus on noise reduction. - Supertrend, Half Trend, SSL Channel: Classic trend-following tools that derive direction from ATR-based bands or moving average channels. - Ichimoku Cloud and SuperIchi: Multi-component systems validating trend via cloud position, conversion/base line relationships, projected cloud, and lagging span. - TSI (True Strength Index), DPO (Detrended Price Oscillator), AO (Awesome Oscillator), MACD, STC (Schaff Trend Cycle), QQE Mod: Momentum and cycle tools that parse direction from crossovers, zero-line behavior, and momentum shifts. - Donchian Trend Ribbon, Chandelier Exit: Trend and exit tools that can validate breakouts or sustained trend strength. - ADX/DMI: Measures trend strength and directional movement via +DI/-DI relationships and minimum ADX thresholds. - RSI and Stochastic: Use crossovers, level exits, or threshold filters to gate entries based on overbought/oversold dynamics or relative strength trends. - Vortex, Chaikin Money Flow, VWAP, Bull Bear Power, ROC, Wolfpack Id, Hull Suite: A diverse set of directional, momentum, and volume-based indicators to suit different markets and styles. - Trendline Breakout and Range Detector: Price-behavior filters that confirm signals during breakouts or within defined ranges. Confirmation Filters - Each filter is optional. When enabled, it must validate the leading condition for a signal to pass. Examples: - EMA Filter: Requires price to be above a specified EMA for longs and below for shorts, filtering signals that contradict broader trend or baseline levels. - 2 EMA Cross and 3 EMA Cross: Enforce moving average cross conditions (fast above slow for long, the reverse for short) or a three-line stacking logic for more stringent trend alignment. - RQK, Supertrend, Half Trend, Donchian, QQE, Hull, MACD (crossover vs. zero-line), AO (zero line or AC momentum variants), SSL: Each adds its characteristic validation pattern. - RSI family (MA cross, exits OB/OS zones, threshold levels) plus RSI MA direction and RSI/RSI MA limits: Multiple ways to constrain signals via relative strength behavior and trajectories. - Choppiness Index and Damiani Volatility: Prevent entries during ranging conditions or insufficient volatility; choppiness thresholds and volatility states gate the trade. - VWAP, Volume modes (above MA, simple up/down, delta), Chaikin Money Flow: Volume and flow conditions that ensure signals happen in supportive liquidity or accumulation/distribution contexts. - ADX/DMI thresholds: Demand a minimum trend strength and directional DI alignment to reduce whipsaw trades. - Trendline Breakout and Range Detector: Confirm that the price is breaking structure or remains within active range consistent with the leading setup. - By combining several filters you can create strict, conservative entries or looser setups depending on your goals. Range Filter Engine - A core building block, the Range Filter uses conditional EMA and SMA functions to compute adaptive bands around a dynamic centerline. It supports two types: - Type 1: The centerline updates when price exceeds the band thresholds; bands define acceptable drift ranges. - Type 2: Uses quantized steps (via floor operations) relative to the previous centerline to handle larger moves in discrete increments. - The engine offers smoothing for range values using a secondary EMA and can switch between raw and averaged outputs. Its hi/lo bands and centerline compose a corridor that defines directional movement and potential breakout confirmation. Signal Construction - The script computes: - leadinglongcond and leadingshortcond : The primary directional signals from the chosen leading indicator. - longCond and shortCond : Final signals formed by combining the leading conditions with all enabled confirmations. Each confirmation contributes a boolean gate. If a filter is disabled, it contributes a neutral pass-through, keeping the logic intact without enforcing that condition. - Expiry Logic: The code counts consecutive bars where the leading condition remains true. If confirmations do not line up within the user-defined “Signal Expiry Candle Count,” the setup is abandoned and the signal does not trigger. - Alternation: An optional state ensures that long and short signals alternate. This can reduce repeated entries in the same direction without a clear reset. - Finally, longCondition and shortCondition represent the actionable signals after expiry and alternation logic. These drive the label plotting and alert conditions. Visualization - Buy and Sell Labels: When longCondition or shortCondition confirm, the script plots annotated labels directly on the chart, making entries easy to see at a glance. The labels use color coding and clear text tags (“long” vs. “short”). - Dashboard: A table summarizes the status of the leading indicator and all confirmations. Each row shows the indicator label and whether it passed (✔️) or failed (❌) on the current bar. This intensely practical UI helps you diagnose why a signal did or did not trigger, empowering faster strategy iteration and parameter tuning. - Failed Confirmation Markers: If a setup expires (count exceeds the limit) and confirmations failed to align, the script can mark the chart with a small label and provide a tooltip listing which confirmations did not pass. It’s a helpful audit trail to understand missed trades or prevent “chasing” invalid signals. - Data Window Values: The script outputs signal states to the data window, which can be useful for debugging or building composite conditions in multi-indicator templates. Inputs and Parameters - You control the indicator from a comprehensive input panel: - Setup: Signal expiry count, whether to enforce alternating signals, and whether to display labels and the dashboard (including position and size). - Leading Indicator: Choose the primary signal generator from the large list. - Per-Filter Toggles: For each confirmation, a respect... toggle enables or disables it. Many include sub-options (like MACD type, Stochastic mode, RSI mode, ADX variants, thresholds for choppiness/volatility, etc.) to fine-tune behavior. - Range Filter Settings: Choose type and behavior; select default vs. DW mode and smoothing. The underlying functions adjust band sizes using ATR, average change, standard deviation, or user-defined scales. - Because everything is customizable, you can adapt the indicator to different assets, volatility regimes, and timeframes. Alerts and Automation - The script defines alert conditions tied to longCondition and shortCondition . You can set these alerts in your chart to trigger notifications or webhook calls for automated execution in external bots. The alert text is simple, and you can configure your own message template when creating alerts in the chart, including JSON payloads for algorithmic integration. Typical Workflow - Select a Leading Indicator aligned with your style. For trend following, Supertrend or SSL may be appropriate; for momentum, MACD or TSI; for range/trend-change detection, Range Filter, RQK, or Donchian. - Add a few key Confirmation Filters that complement the leading signal. For example: - Pair Supertrend with EMA Filter and RSI MA Direction to ensure trend alignment and positive momentum. - Combine MACD Crossover with ADX/DMI and Volume Above MA to avoid signals in low-trend or low-liquidity conditions. - Use RQK with Choppiness Index and Damiani Volatility to only act when the market is trending and volatile enough. - Set a sensible Signal Expiry Candle Count. Shorter expiry keeps entries timely and reduces lag; longer expiry captures setups that mature slowly. - Observe the Dashboard during live markets to see which filters pass or fail, then iterate. Tighten or loosen thresholds and filter combinations as needed. - For automation, turn on alerts for the final conditions and use webhook payloads to notify your trading robot. Strengths and Practical Notes - Flexibility: The indicator is a toolkit rather than a single rigid model. It lets you test different combinations rapidly and visualize outcomes immediately. - Clarity: Labels, dashboard, and failed-confirmation markers make it easy to audit behavior and refine settings without digging into code. - Robustness: The expiry and alternation options add discipline, avoiding the temptation to enter late or repeatedly in one direction without a reset. - Modular Design: The logical gates (“respect…”) make the behavior transparent: if a filter is on, it must pass; if it’s off, the signal ignores it. This keeps reasoning clean. - Avoiding Overfitting: Because you can stack many filters, it’s tempting to over-constrain signals. Start simple (one leading indicator and one or two confirmations). Add complexity only if it demonstrably improves your edge across varied market regimes. Limitations and Recommendations - No single configuration is universally optimal. Markets change; tune filters for the instrument and timeframe you trade and revisit settings periodically. - Trend filters can underperform in choppy markets; likewise, momentum filters can false-trigger in quiet periods. Consider using Choppiness Index or Damiani to gate signals by regime. - Use expiry wisely. Too short may miss good setups that need a few bars to confirm; too long may cause late entries. Balance responsiveness and accuracy. - Always consider risk management externally (position sizing, stops, profit targets). The indicator focuses on signal quality; combining it with robust trade management methods will improve results. Example Configurations - Trend-Following Setup: - Leading: Supertrend uptrend for longs and downtrend for shorts. - Confirmations: EMA Filter (price above 200 EMA for long, below for short), ADX/DMI (trend strength above threshold with +DI/-DI alignment), Volume Above MA. - Expiry: 3–4 bars to keep entries timely. - Result: Strong bias toward sustained moves while avoiding weak trends and thin liquidity. - Mean-Reversion to Momentum Crossover: - Leading: RSI exits from OB/OS zones (e.g., RSI leaves oversold for long and leaves overbought for short). - Confirmations: 2 EMA Cross (fast crossing slow in the same direction), MACD zero-line behavior for added momentum validation. - Expiry: 2–3 bars for responsive re-entry. - Result: Captures momentum transitions after short-term extremes, with extra confirmation to reduce head-fakes. - Range Breakout Focus: - Leading: Range Filter Type 2 or Donchian Trend Ribbon to detect breakouts. - Confirmations: Damiani Volatility (avoid low-volatility false breaks), Choppiness Index (prefer trend-ready states), ROC positive/negative threshold. - Expiry: 1–3 bars to act on breakout windows. - Result: Better alignment to breakout dynamics, gating trades by volatility and regime. Conclusion - This indicator is a comprehensive, configurable framework that merges a chosen leading signal with an array of corroborating filters, disciplined expiry handling, and intuitive visualization. It’s designed to help you build high-quality entry signals tailored to your approach, whether that’s trend-following, breakout trading, momentum capturing, or a hybrid. By surfacing pass/fail states in a dashboard and allowing alert-based automation, it bridges the gap between discretionary analysis and systematic execution. With sensible parameter tuning and thoughtful filter selection, it can serve as a robust backbone for signal generation across diverse instruments and timeframes.
Стратегия Pine Script®
от saodisengSeven
Moving Average Trend Strategy V4.1 — Revised Version (Selectable✅ **Version Notes (V4.0)** | Feature | Description | | --------------------------------------- | -------------------------------------------------------- | | 🧠 **Moving Average Type Options** | Choose from EMA / SMA / HMA / WMA | | 🧱 **Take-Profit / Stop-Loss Switches** | Can be enabled or disabled independently | | ⚙️ **Add Position Function** | Can be enabled or disabled independently | | 🔁 **Add Position Signal Source** | Selectable between MA Crossover / MACD / RCI / RSI | | 💹 **Adjustable Parameters** | All periods and percentages are customizable in settings | --- ✅ **Update Summary:** | Function | Description | | -------------------------------------- | --------------------------------------------------------------------- | | **MA Type Selection** | Choose EMA / SMA / HMA / WMA in chart settings | | **Take-Profit / Stop-Loss Percentage** | Configurable in the “Take-Profit & Stop-Loss” group | | **Add / Reduce Position Percentage** | Adjustable separately in the “Add/Reduce Position” group | | **MA Periods** | Customizable in the “Moving Average Parameters” section | | **Code Structure** | Logic unchanged — only parameterization and selection functions added | --- ### **Strategy Recommendations:** * **Trending Market:** Prefer EMA trend tracking or SAR indicators * **Range-Bound Market:** Use ATR-based volatility stop-loss * **Before Major Events:** Consider option hedging * **Algorithmic Trading:** Recommend ATR + partial take-profit combination strategy --- ### **Key Parameter Optimization Logic:** * Backtest different **ATR multipliers** (2–3× ATR) * Test **EMA periods** (10–50 periods) * Optimize **partial take-profit ratios** * Adjust **maximum drawdown tolerance** (typically 30–50% of profit) --- ### **Risk Control Tips:** * Avoid overly tight stop-losses that trigger too frequently * During strong trends, consider widening take-profit targets * Confirm trend continuation with **volume analysis** * Adjust parameters based on **timeframe** (e.g., Daily vs Hourly) --- ### **Practical Example (Forex: EUR/USD):** * **Entry:** Go long on breakout above 1.1200 * **Initial Stop-Loss:** 1.1150 (50 pips) * **When profit reaches 1.1300:** * Close 50% of position * Move stop-loss to 1.1250 (lock in 50 pips profit) * **When price rises to 1.1350:** * Move stop-loss to 1.1300 (lock in 100 pips profit) * **Final Outcome:** * Price retraces to 1.1300, triggering take-profit This method secured over **80% of trend profits** during the 2023 EUR rebound, capturing **23% more profit** compared to fixed take-profit strategies (based on backtest results).
Стратегия Pine Script®
от shuan789
Premarket Power Bar StrategyStep 1: Mark Your Levels Before the Open When: Between 9:00–9:25 AM ET Premarket High – the highest price before 9:30 AM Premarket Low – the lowest price before 9:30 AM
Use extended hours view on your chart platform. These levels act as magnets and turning points once the market opens. They form the foundation for your first trade of the day. Step 2: Let Price Come to the Level Do not chase early price action.
Wait for price to approach either the premarket high or low during regular market hours.
Look for a pause, hesitation, or test near the level. This keeps you from overtrading and forces you to wait for structure to form. Step 3: Watch for the Power Bar A power bar is a large-bodied candle with strong momentum and little to no wick on the opposite side.
It should form directly at the premarket level—not near it, not after a breakout. At the premarket low, a bullish power bar is your buy trigger. At the premarket high, a bearish power bar signals a short opportunity. No power bar? No trade. The level and the candle must come together to create the edge. (BONUS: As you identify specific patterns, eg, double bottoms, double tops, etc. look for those patterns near the premarket high or low) Step 4: Entry, Stop, and Target Entry: For longs: place your order just above the high of the bullish power bar For shorts: enter just below the low of the bearish power bar Stop: Long trade: just under the low of the power bar Short trade: just above the high of the power bar Profit Target Options: VWAP Prior day’s close Key support/resistance levels Keep your trade logic mechanical and consistent. Execution Guidelines Only trade when price reacts at your marked level Wait for the power bar to fully form before entering Do not jump in early or chase candles that form away from your levels
Индикатор Pine Script®
от elivgorelick
Yon Hybrid Momentum + Breakout Scanner with BB SqueezeThis Pine Script indicator is a comprehensive momentum and breakout scanner that combines multiple technical analysis tools to identify high-probability trading setups. Here's what it does: Core Features: 1. Trend Identification (EMA System) Uses two EMAs (9-period fast, 20-period slow) to determine trend direction Colors the chart background: teal = uptrend, red = downtrend An uptrend is confirmed when the fast EMA crosses above the slow EMA 2. Volume Analysis Monitors volume spikes (when current volume exceeds 2x the 20-period average) Volume spikes often indicate strong institutional interest or breakout momentum Critical for confirming the validity of price movements 3. Momentum Indicators MACD (12, 26, 9): Shows bullish/bearish crossovers with triangle markers RSI (7-period): Identifies overbought (>70) and oversold (<30) conditions VWAP: Shows the volume-weighted average price (purple line) - helps identify whether price is trading at fair value 4. Bollinger Bands & Squeeze Detection Displays Bollinger Bands (20-period, 2 standard deviations) BB Squeeze: Detects when volatility contracts to its lowest level in 20 bars Squeezes often precede explosive breakout moves (like a coiled spring) Orange squares appear at the bottom when a squeeze is detected 5. Breakout Detection The script identifies breakouts using TWO methods: Price breakout: Close above the recent 20-bar high BB breakout: Close above the upper Bollinger Band Confirmed breakout: Must have uptrend + volume spike + one of the above conditions Shows a green "BREAKOUT" label when all conditions align 6. Live Status Label A label in the top-right displays real-time market conditions: Current trend (UPTREND/DOWNTREND) Volume status (VOL SPIKE/Normal Vol) RSI condition (HOT/COOL/Neutral) Squeeze status (if active) 7. Alerts Two automated alerts: Breakout Alert: Triggers when a confirmed breakout occurs Squeeze Alert: Triggers when Bollinger Bands enter a squeeze Trading Use Cases: This indicator is ideal for: Swing traders looking for momentum setups with strong volume confirmation Breakout traders who want to catch explosive moves after consolidation Day traders monitoring multiple timeframes for high-probability entries Watchlist scanning to quickly identify which stocks/cryptos are showing momentum How to Use It: Setup Phase: Look for BB squeeze markers (orange squares) - these signal compression Confirmation: Wait for volume spike + uptrend + MACD bullish crossover Entry: When "BREAKOUT" label appears with all confirmations Validation: Price should be above VWAP and RSI not extremely overbought The script essentially automates the process of finding stocks that are "coiling up" and ready to make a big move, then confirms when that move actually happens with volume.
Индикатор Pine Script®
от ykm4evr
Momentum Variance OscillatorWhat MVO measures: -PV (Price-Volume) Oscillator – how far price is from a volatility-scaled basis, then weighted by relative volume. - > 0 = bullish pressure; < 0 = bearish pressure. -|PV| larger ⇒ stronger momentum. -Signal line (EMA of PV) – a smoother track of PV; crossings flag momentum shifts. -Zero line gradient – instantly shows direction (greenish bull / reddish bear) and strength (paler → stronger). -Extreme bands (±obLevel) – “hot zone” thresholds; being beyond them = exceptional push. -Variance histogram – MACD-like view (PV minus slower PV-EMA) to see thrust building vs. fading. -(Optional) Bar coloring & background tint – paints price bars and/or the panel on key events so you can read the regime at a glance. -Auto-Tune – searches a grid of (obLevel, weakLvl) pairs and (optionally) auto-applies the best, ranked by CAGR vs. drawdown. Core signals & how to trade them: 1) Define the regime: -Bullish regime: PV above 0 and/or PV above Signal; zero line is in bull gradient. -Bearish regime: PV below 0 and/or PV below Signal; zero line is in bear gradient. -Action: Prefer trades with the regime (avoid fading strong color/strength unless you have a clear reversal setup). 2) Entries: Momentum entry: -Long: PV crosses above Signal while PV > 0. -Short: PV crosses below Signal while PV < 0. Breakout/acceleration: -Long add-on: PV crosses above +obLevel (extreme top) and holds. -Short add-on: PV crosses below −obLevel (extreme bottom) and holds. -Histogram confirm: Growing bars in your direction = thrust improving; shrinking/flip = thrust stalling. 3) Exits / risk: -Soft exit / tighten stops: PV loses the extreme and re-enters inside, or histogram fades/turns against you. -Hard exit / reverse: Opposite PV↔Signal crossover and PV crosses the zero line. -Weak zone filter: If |PV| < weakLvl, treat signals as lower quality (smaller size or skip). 4) Practical setup - Suggested defaults (good starting point): -Signal length: 26 -Volume power: 0.50 -obLevel (extreme): 2.00 -weakLvl: 0.75 -Show histogram & dots: On -Auto-Tune (recommended) -Turn Auto-Select Best ON. MVO will scan obLevel 1.50→3.00 (step 0.05) and weakLvl 0.50→1.00 (step 0.05), then use the top-ranked pair (CAGR/(1+MDD)). -If you want to see the top combos, enable the Optimizer Table (Top-3). 5) Visual options -Bar Colors: Regime+Strength – bars follow the zero-line gradient (great for quick read). -Extremes – paint only when beyond ±obLevel. -Cross Signals – paint only on the bar that crosses an extreme. -Background on breach: A one-bar tint when PV crosses an extreme. 6) Example playbook: Long setup: -Zero line shows bull gradient and PV > 0. -PV crosses above Signal (entry). -If PV drives above +obLevel, consider add-on; trail under the last minor swing or use ATR. -Exit/trim on PV crossing below Signal or histogram turning negative; flatten on a drop through 0. Short setup mirrors the above on the bear side. 7) Tips to avoid common traps: -Don’t fade strong extremes without clear confirmation (e.g., PV re-entering inside + histogram flip). -Respect the weak zone: if |PV| < weakLvl, signals are fragile—size down or wait. -Align with structure: higher-timeframe trend and SR improve expectancy. -Instrument personality matters: use Auto-Tune or re-calibrate obLevel/weakLvl across assets/timeframes. 8) Alerts you can set: -Bull Signal X – PV crossed above Signal -Bear Signal X – PV crossed below Signal -Bull Baseline X – PV crossed above 0 -Bear Baseline X – PV crossed below 0
Индикатор Pine Script®
от s3raphic333