Регистрация

Поиск скриптов по запросу "heatmap"

RSI Analytic Volume Matrix [RAVM] Overview RSI Analytic Volume Matrix is an overlay indicator that turns classic RSI into a multi-layered market-reading engine. Instead of treating RSI 30 and 70 as simple buy/sell lines, RAVM combines RSI geometry (angle and acceleration), statistical volume analysis, and a 5×5 VSA-inspired matrix to describe what is really happening inside each candle. The script is designed as an educational and analytical tool. It does not generate trading signals. Instead, it helps you read the market context, understand where the pressure is coming from (buyers vs. sellers), and see how price, momentum, and volume interact in real time. Concept & Philosophy RAVM is built around a hierarchical logic and a few core ideas: • Hierarchical State Machine: First, RSI defines a context (where we are in the 0–100 range). Then the geometric engine evaluates the angle-of-turn of RSI using a Z-Score. Only after a meaningful geometric event is detected does the system promote a bar to a potential setup (warning vs. confirmed). • Geometric Primacy: The angle and acceleration of RSI (RSI geometry) are more important than the raw RSI level itself. RAVM uses a geometric veto: if the geometric trigger is not confirmed, the confidence score is capped below 50%, even if volume looks interesting. • RSI Beyond 30 and 70: Being above 70 or below 30 is not treated as an automatic overbought/oversold signal. RAVM treats those zones as contextual factors that contribute only a partial portion of the final score, alongside geometry, total volume expansion, buy/sell balance, and delta power. • Volume Decomposition: Volume is decomposed into total, buy-side, sell-side, and delta components. Each of these is normalized with a Z-Score over a shared statistical window, so RSI geometry and volume live in the same statistical context. • Educational Scoring Pipeline: RAVM builds a 0–100 "Quantum Score" for each detected setup. The score expresses how strong the story is across four dimensions: geometry (RSI angle-of-turn), total volume expansion, which side is driving that volume (buyers vs. sellers), and the power of delta. The score is designed for learning and weighting, not for mechanical trade entries. • VSA Matrix Engine: A 5×5 matrix combines momentum states and volume dynamics. Each cell corresponds to an interpreted VSA-style scenario (Absorption, Distribution, No Demand, Stopping Volume, Strong Reversal, etc.), shown both as text and as a heatmap dashboard on the chart. How RAVM Works 1. RSI Context & Geometry RAVM starts with a classic RSI, but it does not stop at simple level checks. It computes the velocity and acceleration of RSI and normalizes them via a Z-Score to produce an Angle-of-Turn metric (Z-AoT). This Z-AoT is then mapped into a 0–1 intensity value called MSI (Momentum Shift Intensity). The script monitors both classic RSI zones (around 30 and 70) and geometric triggers. Entering the lower or upper zone is treated as a contextual event only. A setup becomes "confirmed" when a significant geometric turn is detected (based on Z-AoT thresholds). Otherwise, the bar is at most a warning. 2. Volume & Statistical Engine The volume engine can work in two modes: a geometric approximation (based on candle structure) or a more precise intrabar mode using up/down volume requests. In both cases, RAVM builds a volume packet consisting of: • Total volume • Buy-side volume • Sell-side volume • Delta (buy – sell) Each of these series is normalized using a Z-Score over the same statistical window that is used for RSI geometry. This allows RAVM to answer questions such as: Is total volume exceptional on this bar? Is the expansion mostly coming from buyers or from sellers? Is delta unusually strong or weak compared to recent history? 3. Scoring System (Quantum Score) For each bar where a setup is active, RAVM computes a 0–100 score intended as an educational confidence measure. The scoring pipeline follows this sequence: A. RSI Geometry (MSI): Measures the strength of the RSI angle-of-turn via Z-AoT. This has geometric primacy over simple level checks. B. RSI Zone Context: Being below 30 or above 70 contributes only a partial bonus to the score, reflecting the idea that these zones are context, not automatic signals. Mildly supportive zones (e.g., RSI below 50 for bullish contexts) can also contribute with lower weight. C. Total Volume Expansion: A normalized Volume Power term expresses how exceptional the total volume is relative to its recent distribution. If there is no meaningful volume expansion, the score remains modest even if RSI geometry looks interesting. D. Which Side Is Driving the Volume: RAVM then checks whether the expansion is primarily on the buy side or the sell side, using Z-Score statistics for buy and sell volume separately. This stage does not yet rely on delta as a power metric; it simply answers the question: "Is this expansion mostly driven by buyers, sellers, or both?" E. Delta as Final Power: Only at the final stage does the script bring in delta and its Z-Score as a measure of how one-sided the pressure really is. A strong negative delta during a bullish context, for example, can highlight absorption, while a strong positive delta against a bearish context can highlight distribution or a buying climax. If a setup is not geometrically confirmed (for example, a simple entry into RSI 30/70 without a strong geometric turn), RAVM caps the final score below 50%. This "Geometric Veto" enforces the idea that RSI geometry must confirm before a scenario can be considered high-confidence. 4. Overlay UI & Smart Labels RAVM is an overlay indicator: all information is drawn directly on the price chart, not in a separate pane. When a setup is active, a smart label is attached to the bar, together with a vertical connector line. Each label shows: • Direction of the setup (bullish or bearish) • Trigger type (classic OS/OB vs. geometric/hidden) • Status (warning vs. confirmed) • Quantum Score as a percentage Confirmed setups use stronger colors and solid connectors, while warnings use softer colors and dotted connectors. The script also manages label placement to avoid overlap, keeping the chart clean and readable. In addition to labels, a dashboard table is drawn on the chart. It displays the currently active matrix scenario, the dominant bias, a short textual interpretation, the full 5×5 heatmap, and summary metrics such as RSI, MSI, and Volume Power. RSI Is Not Just 30 and 70 One of the central design decisions in RAVM is to treat RSI 30 and 70 as context, not as fixed buy/sell buttons. Many traders mechanically assume that RSI below 30 means "buy" and RSI above 70 means "sell". RAVM explicitly rejects this simplification. Instead, the script asks a series of deeper questions: How sharp is the angle-of-turn of RSI right now? Is total volume expanding or contracting? Is that expansion dominated by buyers or sellers? Is delta confirming the move, or is there a hidden absorption or distribution taking place? In the scoring logic, being in a lower or upper RSI zone contributes only part of the final score. Geometry, volume expansion, the buy/sell split, and delta power all have to align before a high-confidence scenario emerges. This makes RAVM much closer to a structured market-reading tool than a classic overbought/oversold indicator. Matrix User Manual – Reading the 5×5 Grid The heart of RAVM is its 5×5 matrix, where the vertical axis represents momentum states (M1–M5) and the horizontal axis represents volume dynamics (V1–V5). Each cell in this grid corresponds to a VSA-style scenario. The dashboard highlights the currently active cell and prints a textual description so you can read the story at a glance. 1. Confirmation Scenarios These scenarios occur when momentum direction and volume expansion are aligned: • Bullish Confirmation / Strong Reversal: Momentum is shifting strongly upward (often from a depressed RSI context), and expanded volume is driven mainly by buyers. Often seen as a strong bullish reversal or continuation signal from a VSA perspective. • Bearish Confirmation / Strong Drop: Momentum is turning decisively downward, and expanded volume is driven mainly by sellers. This maps to strong bearish continuation or sharp reversal patterns. 2. Absorption & Stopping Volume • Absorption: Total volume expands, but the dominant flow is opposite to the recent price move or the geometric bias. For example, heavy selling volume while the geometric context is bullish. This can indicate smart money quietly absorbing orders from the crowd. • Stopping Volume: Exceptionally high volume appears near the end of an extended move, while momentum begins to decelerate. Price may still print new extremes, but the effort vs. result relationship signals potential exhaustion and the possibility of a turn. 3. Distribution & Buying Climax • Distribution: Heavy buying volume appears within a bearish or topping context. Rather than healthy accumulation, this often represents larger players offloading inventory to late buyers. The matrix will typically flag this as a bearish-leaning scenario despite strong upside prints. • Buying Climax: A surge of buy-side volume near the end of a strong uptrend, with momentum starting to weaken. From a VSA point of view, this is often the last push where retail aggressively buys what smart money is selling. 4. No Demand & No Supply • No Demand: Price attempts to rise but does so on low, non-expansive volume. The market is not interested in following the move, and the lack of participation often precedes weakness or sideways action. • No Supply: Price tries to push lower on thin volume. Selling pressure is limited, and the lack of supply can precede stabilization or recovery if buyers step back in. 5. Trend Exhaustion • Uptrend Exhaustion: Momentum remains nominally bullish, but the quality of volume deteriorates (e.g., more effort, less net result). The matrix marks this as an uptrend losing internal strength, often after a series of aggressive moves. • Downtrend Exhaustion: Similar logic in the opposite direction: strong prior downtrend, but increasingly inefficient downside progress relative to the volume invested. This can precede accumulation or a relief rally. 6. Effort vs. Result Scenarios • Bullish Effort, Little Result: Buyers invest notable volume, but price progress is limited. This may reveal hidden selling into strength or a lack of follow-through from the broader market. • Bearish Effort, Little Result: Sellers push volume, but price does not decline proportionally. This can indicate absorption of selling pressure and potential underlying demand. 7. Neutral, Churn & Thin Markets • Neutral / Thin Market: Momentum and volume both remain muted. RAVM marks these as neutral cells where aggressive decision-making is usually less attractive and observing the broader structure is more important. • High Volume Churn / Volatility: Both sides are active with high volume but limited directional progress. This can correspond to battle zones, local ranges, or high volatility rotations where the main message is conflict rather than clear trend. Inputs & Options RAVM includes several input groups to adapt the tool to your preferences: • Localization: Multiple language options for all labels and dashboard text (e.g., English, Farsi, Turkish, Russian). • RSI Core Settings: RSI length, source, and upper/lower contextual zones (typically around 30 and 70). • Geometric Engine: Z-AoT sigma thresholds, confirmation ratios, and normalization window multiplier. These control how sensitive the script is to RSI angle-of-turn events. • Volume Engine: Choice between geometric approximation and intrabar up/down volume, Z-Score thresholds for volume expansion, and related parameters. • Visual Interface: Toggles for smart labels, dashboard table, font sizes, dashboard position, and color themes for bullish, bearish, and warning states. Disclaimer RSI Analytic Volume Matrix is provided for educational and research purposes only. It does not constitute financial advice and is not a signal generator. Any trading decisions you make based on this tool, or any other, are entirely your own responsibility. Always consider your own risk management rules and conduct your own analysis.
Индикатор Pine Script®
от ata_sabanci
4
Bollinger Bands Delta Matrix Analytics [BDMA] Bollinger Bands Delta Matrix Analytics (BDMA) v7.0 Deep Kinetic Engine – 5x8 Volatility & Delta Decision Matrix 1. Introduction & Concept Bollinger Bands Delta Matrix Analytics (BDMA) v7.0 is an analytical framework that merges: - Spatial analysis via Bollinger Bands (%B location), - with a 4-factor Deep Kinetic Engine based on: • Total Volume • Buy Volume • Sell Volume • Delta (Buy – Sell) Z-Scores and converts them into an expanded 5×8 decision matrix that continuously tracks where price is trading and how the underlying orderflow is behaving. BDMA is not a trading system or strategy. It does not generate entry/exit signals. Instead, it provides a structured contextual map of volatility, volume, and delta so traders can: - identify climactic extensions vs. fakeouts, - distinguish strong initiative moves vs. passive absorption, - and detect squeezes, traps, and liquidity voids with a unified visual dashboard. 2. Spatial Engine – Bollinger S-States (S1–S5) The spatial dimension of BDMA comes from classic Bollinger Bands. Price location is expressed as Percent B (%B) and mapped into 5 spatial states (S-States): S1 – Hyper Extension (Above Upper Band) Price has pushed beyond the upper Bollinger Band. Often associated with parabolic or blow-off behavior, late-stage momentum, and elevated reversal risk. S2 – Resistance Test (Upper Zone) Price trades in the upper Bollinger region but remains inside the bands. Represents a sustained test of resistance, typically within an established or emerging uptrend. S3 – Neutral Zone (Middle) Price hovers around the mid-band. This is the mean reversion gravity field where the market often consolidates or transitions between regimes. S4 – Support Test (Lower Zone) Price trades in the lower Bollinger region but inside the bands. Represents a sustained test of support within range or downtrend structures. S5 – Hyper Drop (Below Lower Band) Price extends below the lower Bollinger Band. Often aligned with panic, forced liquidations, or capitulation-type behavior, with increased snap-back risk. These 5 S-States define the vertical axis (rows) of the BDMA matrix. 3. Deep Kinetic Engine – 4-Factor Z-Score & D-States (D1–D8) The Deep Kinetic Engine transforms raw volume and delta into standardized Z-Scores to measure how abnormal current activity is relative to its recent history. For each bar: - Raw Buy Volume is estimated from the candle’s position within its range - Raw Sell Volume is complementary to buy volume - Raw Delta = Buy Volume – Sell Volume - Total Volume = Buy Volume + Sell Volume These 4 series are then normalized using a unified Z-Score lookback to produce: 1. Z_Vol_Total – overall activity and liquidity intensity 2. Z_Vol_Buy – aggression from buyers (attack) 3. Z_Vol_Sell – aggression from sellers (defense or attack) 4. Z_Delta – net victory of one side over the other Thresholds for Extreme, Significant, and Neutral Z-Score levels are fully configurable, allowing you to tune the sensitivity of the kinetic states. Using Z_Vol_Total and Z_Delta (plus threshold logic), BDMA assigns one of 8 Deep Kinetic states (D-States): D1 – Climax Buy Extreme Total Volume + Extreme Positive Delta → Buying climax or blow-off behavior. D2 – Strong Buy High Volume + High Positive Delta → Confirmed bullish initiative activity. D3 – Weak Buy / Fakeout Low Volume + High Positive Delta → Bullish delta without commitment, low-liquidity breakout risk. D4 – Absorption / Conflict High Volume + Neutral Delta → Aggressive two-way trade, strong absorption, war zone behavior. D5 – Neutral Low Volume + Neutral Delta → Low-energy environment with low conviction. D6 – Weak Sell / Fakeout Low Volume + High Negative Delta → Bearish delta without commitment, low-liquidity breakdown risk. D7 – Strong Sell High Volume + High Negative Delta → Confirmed bearish initiative activity. D8 – Capitulation Extreme Volume + Extreme Negative Delta → Panic selling or capitulation regime. These 8 D-States define the horizontal axis (columns) of the BDMA matrix. 4. The 5×8 BDMA Decision Matrix The core of BDMA is a 5×8 matrix where: - Rows (1–5) = Spatial S-States (S1…S5) - Columns (1–8) = Kinetic D-States (D1…D8) Each of the 40 possible combinations (SxDy) is pre-computed and mapped to: - a Status or Regime Title (for example: Climax Breakout, Bear Trap Spring, Capitulation Breakdown), - a Bias (Climactic Bull, Neutral, Strong Bear, Conflict or Reversal Risk, and similar labels), - and a Strategic Signal or Consideration (for example: High reversal risk, Wait for confirmation, Low probability zone – avoid). Internally, BDMA resolves all 40 regimes so the current state can be displayed on the dashboard without performance overhead. 5. Key Regime Families (How to Read the Matrix) 5.1. Breakouts and Breakdowns Climax Breakout (Top-side) Spatial S1 with Kinetic D1 or D2 Bias: Explosive or Extreme Bull Signal: - Strong or climactic upside extension with abnormal bullish orderflow. - Trend continuation is possible, but reversal risk is extremely high after blow-off phases. Low-Conviction Breakout (Fakeout Risk) S1 with D3 (Weak Buy, low liquidity) Bias: Weak Bull – Caution Signal: - Breakout not supported by volume. - Elevated risk of failed auction or bull trap. Capitulation Breakdown (Bottom-side) Spatial S5 with Kinetic D8 Bias: Climactic Bear (panic) Signal: - Capitulation-type selling or forced liquidations. - Trend can still proceed, but snap-back or violent short-covering risk is high. Initiative Breakdown vs. Weak Breakdown - Strong, high-volume breakdown typically corresponds to D7 (Strong Sell). - Low-volume breakdown often corresponds to D6 (Weak Sell or Fakeout) with potential for failure. 5.2. Absorption, Traps and Springs Absorption at Resistance (Top-side conflict) S1 or S2 with D4 (Absorption or Conflict) Bias: Conflict – Extreme Tension Signal: - Heavy two-way trade near resistance. - Potential distribution or reversal if sellers begin to dominate. Bull Trap or Failed Auction Typically S1 with D6 (Weak Sell breakdown behavior after a top-side attempt) Indicates a breakout attempt that fails and reverses, often after poor liquidity structure. Absorption at Support and Bear Trap (Spring) S4 or S5 with D4 or D3 Bias: Conflict or Weak Bear – Reversal Risk Signal: - Aggressive buying into lows (spring or shakeout behavior). - Potential bear trap if price reclaims lost territory. 5.3. Trend Phases Strong Uptrend Phases Typically seen when S2–S3 combine with strong bullish kinetic behavior. Bias: Strong or Extreme Bull Signal: - Pullbacks into S3 or S4 with supportive kinetic states often act as trend continuation zones. Strong Downtrend Phases Typically seen when S3–S4 combine with strong bearish kinetic behavior. Bias: Strong or Extreme Bear Signal: - Rallies into resistance with strong bearish kinetic backing may act as continuation sell zones. 5.4. Neutral, Exhaustion and Squeeze Exhaustion or Liquidity Void S1 or S5 with D5 (Neutral kinetics) Bias: Neutral or Exhaustion Signal: - Spatial extremes without kinetic confirmation. - Often marks the end of a move, with poor follow-through. Choppy, Low-Activity Range S3 with D5 Bias: Neutral Signal: - Low volume, low conviction market. - Typically a low-probability environment where standing aside can be logical. Squeeze or High-Tension Zone S3 with D4 or tightly clustered kinetic values Bias: Conflict or High Tension Signal: - Hidden battle inside a volatility contraction. - Often precedes large directionally-biased moves. 6. Dashboard Layout & Reading Guide When Show Dashboard is enabled, BDMA displays: 1. Title and Status Line Name of the current regime (for example: Climax Breakout, Bear Trap Spring, Mean Reversion). 2. Bias Line Plain-language summary of directional context such as Climactic Bull, Strong Bear, Neutral, or Conflict and Reversal Risk. 3. Signal or Strategic Notes Concise guidance focused on risk and context, not entries. For example: - High reversal risk – aggressive traders only - Wait for confirmation (break or rejection) - Low probability zone – avoid taking new positions 4. Kinetic Profile (4-Factor Z-Score) Shows the current Z-Scores for Total Volume (Activity), Buy Volume (Attack), Sell Volume (Defense), and Delta (Net Result). 5. Matrix Heatmap (5×8) Visual representation of S-State vs. D-State with color coding: - Bullish clusters in a green spectrum - Bearish clusters in a red spectrum - Conflict or exhaustion zones in yellow, amber, or neutral tones The dashboard can be repositioned (top right, middle right, or bottom right) and its size can be adjusted (Tiny, Small, Normal, or Large) to fit different layouts. 7. Inputs & Customization 7.1. Core Parameters (Bollinger and Z-Score) - Bollinger Length and Standard Deviation define the spatial engine. - Z-Score Lookback (All Factors) defines how many bars are used to normalize volume and delta. 7.2. Deep Kinetic Thresholds - Extreme Threshold defines what is considered climactic (D1 or D8). - Significant Threshold distinguishes strong initiative vs. weak or fakeout behavior. - Neutral Threshold is the band within which delta is treated as neutral. These thresholds allow you to tune the sensitivity of the kinetic classification to fit different timeframes or instruments. 7.3. Calculation Method (Volume Delta) Geometry (Approx) - Fast, non-repainting approach based on candle geometry. - Suitable for most users and real-time decision-making. Intrabar (Precise) - Uses lower-timeframe data for more precise volume delta estimation. - Intrabar mode can repaint and requires compatible data and plan support on the platform. - Best used for post-analysis or research, not blind automation. 7.4. Visuals and Interface - Toggle Bollinger Bands visibility on or off. - Switch between Dark and Light color themes. - Configure dashboard visibility, matrix heatmap display, position, and size. 8. Multi-Language Semantic Engine (Asia and Middle East Focus) BDMA v7.0 includes a fully integrated multi-language layer, targeting a wide geographic user base. Supported Languages: English, Türkçe, Русский, 简体中文, हिन्दी, العربية, فارسی, עברית All dashboard labels, regime titles, bias descriptions, and signal texts are dynamically translated via an internal dictionary, while semantic meaning is kept consistent across languages. This makes BDMA suitable for multi-language communities, study groups, and educational content across different regions. However, due to the heavy computational load of the Deep Kinetic Engine and TradingView’s strict Pine Script execution limits, it was not possible to expand support to additional languages. Adding more translation layers would significantly increase memory usage and exceed runtime constraints. For this reason, the current language set represents the maximum optimized configuration achievable without compromising performance or stability. 9. Practical Usage Notes BDMA is most powerful when used as a contextual overlay on top of market structure (HH, HL, LH, LL), higher-timeframe trend, key levels, and your own execution framework. Recommended usage: - Identify the current regime (Status and Bias). - Check whether price location (S-State) and kinetic behavior (D-State) agree with your trade idea. - Be especially cautious in climactic and absorption or conflict zones, where volatility and risk can be elevated. Avoid treating BDMA as an automatic green equals buy, red equals sell tool. The real edge comes from understanding where you are in the volatility or kinetic spectrum, not from forcing signals out of the matrix. 10. Limitations & Important Warnings BDMA does not predict the future. It organizes current and recent data into a structured context. Volume data quality depends on the underlying symbol, exchange, and broker feed. Forex, crypto, indices, and stocks may all behave differently. Intrabar mode can repaint and is sensitive to lower-timeframe data availability and your plan type. Use it with extra caution and primarily for research. No indicator can remove the need for clear trading rules, disciplined risk management, and psychological control. 11. Disclaimer This script is provided strictly for educational and analytical purposes. It is not a trading system, signal service, financial product, or investment advice. Nothing in this indicator or its description should be interpreted as a recommendation to buy or sell any asset. Past behavior of any indicator or market pattern does not guarantee future results. Trading and investing involve significant risk, including the risk of losing more than your initial capital in leveraged products. You are solely responsible for your own decisions, risk management, and results. By using this script, you acknowledge that you understand these risks and agree that the author or authors and publisher or publishers are not liable for any loss or damage arising from its use.
Индикатор Pine Script®
от ata_sabanci
2
Orderbook Table1. Indicator Name Orderbook Table This is an order book style trading volume map that upgraded the price from my first script to label 2. One-line Introduction A visual heatmap-style orderbook simulator that displays volume and delta clustering across price levels. 3. Overall Description Orderbook Table is a powerful visual tool designed to replicate an on-chart approximation of a traditional order book. It scans historical candles within a specified lookback window and accumulates traded volume into price "bins" or levels. Each level is color-coded based on total volume and directional bias (delta), offering a layered view of where market interest was concentrated. The indicator approximates order flow by analyzing each candle's directional volume, separating bullish and bearish volume. With adjustable parameters such as level depth, price bin density, delta sensitivity, and opacity, it provides a highly customizable visualization. Displayed directly on the chart, each level shows the volume at that price zone, along with a price label, offset to the right of the current bar. Traders can use this tool to detect high liquidity zones, support/resistance clusters, and volume imbalances that may precede future price movements. 4. Key Benefits (Title + Description) ✅ On-Chart Volume Heatmap Shows volume distribution across price levels in real-time directly on the price chart, creating a live “orderbook” view. ✅ Delta-Based Bias Coloring Color changes based on net buying/selling pressure (delta), making aggressive demand/supply zones easy to spot. ✅ High Customizability Users can adjust lookback bars, price bins, opacity levels, and delta usage to fit any market condition or asset class. ✅ Lightweight Simulation Approximates orderbook depth using candle data without needing L2 feed access—works on all assets and timeframes. ✅ Clear Visual Anchoring Volume quantities and price levels are offset to the right for easy viewing without cluttering the active chart area. ✅ Fast Market Context Recognition Quickly identify price levels where volume concentrated historically, improving decision-making for entries/exits. 5. Indicator User Guide 📌 Basic Concept Orderbook Table analyzes a configurable number of past bars and distributes traded volume into price "bins." Each bin shows how much volume occurred around that price level, optionally adjusted for bullish/bearish candle direction. ⚙️ Settings Overview Lookback Bars: Number of candles to scan for volume history Levels (Total): Number of price levels to display around the current price Price Bins: Granularity of price segmentation for volume distribution Shift Right: How far to offset labels to the right of the current bar Max/Min Opacity: Controls visual strength of volume coloring Use Candle Delta Approx.: If enabled, colors the volume based on candle direction (green for up, red for down) 📈 Example Timing Look for green clusters (bullish bias) below current price → possible strong demand zones Price enters a high-volume level with previously aggressive buyers (green), suggesting support 📉 Example Timing Red clusters (bearish bias) above current price can act as resistance or supply zones Price stalling at a red-heavy volume band may indicate exhaustion or reversal opportunity 🧪 Recommended Use Use as a support/resistance mapping tool in ranging and trending markets Pair with candlestick analysis or momentum indicators for refined entry/exit points Combine with VWAP or volume profile for multi-dimensional volume insight 🔒 Cautions This is an approximation, not a true L2 orderbook—volume is based on historical candles, not actual limit order data In low-volume markets or higher timeframes, bin granularity may be too coarse—adjust "Price Bins" accordingly Delta calculation is based on open-close direction and does not reflect true buy/sell volume splits Avoid overinterpreting low-opacity (light color) zones—they may indicate low interest rather than true resistance/support +++
Индикатор Pine Script®
от c9indicator
Ultimate Multi-Asset Correlation System by able eiei Ultimate Multi-Asset Correlation System - User Guide Overview This advanced TradingView indicator combines WaveTrend oscillator analysis with comprehensive multi-asset correlation tracking. It helps traders understand market relationships, identify regime changes, and spot high-probability trading opportunities across different asset classes. Key Features 1. WaveTrend Oscillator Main Signal Lines: WT1 (blue) and WT2 (red) plot momentum and its moving average Overbought/Oversold Zones: Default levels at +60/-60 Cross Signals: 🟢 Bullish: WT1 crosses above WT2 in oversold territory 🔴 Bearish: WT1 crosses below WT2 in overbought territory Higher Timeframe (HTF) Analysis: Shows WT1 from 4H, Daily, and Weekly timeframes for trend confirmation 2. Multi-Asset Correlation Tracking Monitors relationships between: Major Assets: Gold (XAUUSD), Dollar Index (DXY), US 10-Year Yield, S&P 500 Crypto Assets: Bitcoin, Ethereum, Solana, BNB Cross-Asset Analysis: Correlation between traditional markets and crypto 3. Market Regime Detection Automatically identifies market conditions: Risk-On: High correlation + positive sentiment (🟢 Green background) Risk-Off: High correlation + negative sentiment (🔴 Red background) Crypto-Risk-On: Strong crypto correlations (🟠 Orange background) Low-Correlation: Divergent market behavior (⚪ Gray background) Neutral: Mixed signals (🟡 Yellow background) How to Use Basic Setup Add to Chart: Apply the indicator to any chart (works on all timeframes) Choose Display Mode (Display Options): All: Shows everything (recommended for comprehensive analysis) WaveTrend Only: Focus on momentum signals Correlation Only: View market relationships Heatmap Only: Simplified correlation view Enable Asset Groups: ✅ Major Assets: Traditional markets (stocks, bonds, commodities) ✅ Crypto Assets: Digital currencies Mix and match based on your trading focus Reading the Charts WaveTrend Section (Bottom Panel) Above 0 = Bullish momentum Below 0 = Bearish momentum Above +60 = Overbought (potential reversal) Below -60 = Oversold (potential bounce) Lighter lines = Higher timeframe trends Correlation Histogram (Colored Bars) Blue bars: Major asset correlations Orange bars: Crypto correlations Purple bars: Cross-asset correlations Bar height: Correlation strength (-50 to +50 scale) Background Color Intensity reflects correlation strength Color shows market regime Dashboard Elements 🎯 Market Regime Analysis (Top Left) Current Regime: Overall market condition Average Correlation: Strength of relationships (0-1 scale) Risk Sentiment: -100% (risk-off) to +100% (risk-on) HTF Alignment: Multi-timeframe trend agreement Signal Quality: Confidence level for current signals 📊 Correlation Matrix (Top Right) Shows correlation values between asset pairs: 1.00: Perfect positive correlation 0.75+: Strong correlation (🟢 Green) 0.50+: Medium correlation (🟡 Yellow) 0.25+: Weak correlation (🟠 Orange) Below 0.25: Negative/no correlation (🔴 Red) 🔥 Correlation Heatmap (Bottom Right) Visual matrix showing: Gold vs. DXY, BTC, ETH DXY vs. BTC, ETH BTC vs. ETH Color-coded strength 📈 Performance Tracker (Bottom Left) Tracks individual asset momentum: WT1 Values: Current momentum reading Status: OB (overbought) / OS (oversold) / Normal Trading Strategies 1. High-Probability Trend Following ✅ Entry Conditions: WaveTrend bullish/bearish cross HTF Alignment matches signal direction Signal Quality > 70% Correlation supports direction 2. Regime Change Trading 🎯 Watch for regime shifts: Risk-Off → Risk-On = Consider long positions High correlation → Low correlation = Reduce position size Crypto-Risk-On = Focus on crypto longs 3. Divergence Trading 🔍 Look for: Strong correlation breakdown = Potential volatility Cross-asset correlation surge = Follow the leader Volume-price correlation extremes = Trend confirmation 4. Overbought/Oversold Reversals ⚡ Trade reversals when: WT crosses in extreme zones (-60/+60) HTF alignment shows opposite trend weakening Correlation confirms mean reversion setup Customization Tips Fine-Tuning Parameters WaveTrend Core: Channel Length (10): Lower = more sensitive, Higher = smoother Average Length (21): Adjust for your timeframe Correlation Settings: Length (50): Longer = more stable, Shorter = more responsive Smoothing (5): Reduce noise in correlation readings Market Regime: Risk-On Threshold (0.6): Lower = earlier regime signals High Correlation Threshold (0.75): Adjust sensitivity Custom Asset Selection Replace default symbols with your preferred markets: Major Assets: Any forex, indices, bonds Crypto: Any digital currencies Must use correct exchange prefix (e.g., BINANCE:BTCUSDT) Alert System Enable "Advanced Alerts" to receive notifications for: ✅ Market regime changes ✅ Correlation breakdowns/surges ✅ Strong signals with high correlation ✅ Extreme volume-price correlation ✅ Complete HTF alignment Correlation Interpretation Guide ValueMeaningTrading Implication+0.75 to +1.0Strong positiveAssets move together+0.5 to +0.75Moderate positiveGenerally aligned+0.25 to +0.5Weak positiveLoose relationship-0.25 to +0.25No correlationIndependent movements-0.5 to -0.25Weak negativeSlight inverse relationship-0.75 to -0.5Moderate negativeTend to move opposite-1.0 to -0.75Strong negativeStrongly inversely correlated Best Practices Use Multiple Timeframes: Check HTF alignment before trading Confirm with Correlation: Strong signals work best with supportive correlations Watch Regime Changes: Adjust strategy based on market conditions Volume Matters: Enable volume-price correlation for confirmation Quality Over Quantity: Trade only high-quality setups (>70% signal quality) Common Patterns to Watch 🔵 Risk-On Environment: Gold-BTC positive correlation DXY negative correlation with risk assets High crypto correlations 🔴 Risk-Off Environment: Flight to safety (Gold up, stocks down) DXY strength Correlation breakdowns 🟡 Transition Periods: Low correlation across assets Mixed HTF signals Use caution, reduce position sizes Technical Notes Calculation Period: Uses HLC3 (average of high, low, close) Correlation Window: Rolling correlation over specified length HTF Data: Accurately calculated using security() function Performance: Optimized for real-time calculation on all timeframes Support For optimal performance: Use on 15-minute to daily timeframes Enable only needed asset groups Adjust correlation length based on trading style Combine with your existing strategy for confirmation Enjoy comprehensive multi-asset analysis! 🚀
Индикатор Pine Script®
от Able-terminal
2
Bifurcation Zone - CAEBifurcation Zone — Cognitive Adversarial Engine (BZ-CAE) Bifurcation Zone — CAE (BZ-CAE) is a next-generation divergence detection system enhanced by a Cognitive Adversarial Engine that evaluates both sides of every potential trade before presenting signals. Unlike traditional divergence indicators that show every price-oscillator disagreement regardless of context, BZ-CAE applies comprehensive market-state intelligence to identify only the divergences that occur in favorable conditions with genuine probability edges. The system identifies structural bifurcation points — critical junctures where price and momentum disagree, signaling potential reversals or continuations — then validates these opportunities through five interconnected intelligence layers: Trend Conviction Scoring , Directional Momentum Alignment , Multi-Factor Exhaustion Modeling , Adversarial Validation , and Confidence Scoring . The result is a selective, context-aware signal system that filters noise and highlights high-probability setups. This is not a "buy the arrow" indicator. It's a decision support framework that teaches you how to read market state, evaluate divergence quality, and make informed trading decisions based on quantified intelligence rather than hope. What Sets BZ-CAE Apart: Technical Architecture The Problem With Traditional Divergence Indicators Most divergence indicators operate on a simple rule: if price makes a higher high and RSI makes a lower high, show a bearish signal. If price makes a lower low and RSI makes a higher low, show a bullish signal. This creates several critical problems: Context Blindness : They show counter-trend signals in powerful trends that rarely reverse, leading to repeated losses as you fade momentum. Signal Spam : Every minor price-oscillator disagreement generates an alert, overwhelming you with low-quality setups and creating analysis paralysis. No Quality Ranking : All signals are treated identically. A marginal divergence in choppy conditions receives the same visual treatment as a high-conviction setup at a major exhaustion point. Single-Sided Evaluation : They ask "Is this a good long?" without checking if the short case is overwhelmingly stronger, leading you into obvious bad trades. Static Configuration : You manually choose RSI 14 or Stochastic 14 and hope it works, with no systematic way to validate if that's optimal for your instrument. BZ-CAE's Solution: Cognitive Adversarial Intelligence BZ-CAE solves these problems through an integrated five-layer intelligence architecture: 1. Trend Conviction Score (TCS) — 0 to 1 Scale Most indicators check if ADX is above 25 to determine "trending" conditions. This binary approach misses nuance. TCS is a weighted composite metric: Formula : 0.35 × normalize(ADX, 10, 35) + 0.35 × structural_strength + 0.30 × htf_alignment Structural Strength : 10-bar SMA of consecutive directional bars. Captures persistence — are bulls or bears consistently winning? HTF Alignment : Multi-timeframe EMA stacking (20/50/100/200). When all EMAs align in the same direction, you're in institutional trend territory. Purpose : Quantifies how "locked in" the trend is. When TCS exceeds your threshold (default 0.80), the system knows to avoid counter-trend trades unless other factors override. Interpretation : TCS > 0.85: Very strong trend — counter-trading is extremely high risk TCS 0.70-0.85: Strong trend — favor continuation, require exhaustion for reversals TCS 0.50-0.70: Moderate trend — context matters, both directions viable TCS < 0.50: Weak/choppy — reversals more viable, range-bound conditions 2. Directional Momentum Alignment (DMA) — ATR-Normalized Formula : (EMA21 - EMA55) / ATR14 This isn't just "price above EMA" — it's a regime-aware momentum gauge. The same $100 price movement reads completely differently in high-volatility crypto versus low-volatility forex. By normalizing with ATR, DMA adapts its interpretation to current market conditions. Purpose : Quantifies the directional "force" behind current price action. Positive = bullish push, negative = bearish push. Magnitude = strength. Interpretation : DMA > 0.7: Strong bullish momentum — bearish divergences risky DMA 0.3 to 0.7: Moderate bullish bias DMA -0.3 to 0.3: Balanced/choppy conditions DMA -0.7 to -0.3: Moderate bearish bias DMA < -0.7: Strong bearish momentum — bullish divergences risky 3. Multi-Factor Exhaustion Modeling — 0 to 1 Probability Single-metric exhaustion detection (like "RSI > 80") misses complex market states. BZ-CAE aggregates five independent exhaustion signals: Volume Spikes : Current volume versus 50-bar average 2.5x average: 0.25 weight 2.0x average: 0.15 weight 1.5x average: 0.10 weight Divergence Present : The fact that a divergence exists contributes 0.30 weight — structural momentum disagreement is itself an exhaustion signal. RSI Extremes : Captures oscillator climax zones RSI > 80 or < 20: 0.25 weight RSI > 75 or < 25: 0.15 weight Pin Bar Detection : Identifies rejection candles (2:1 wick-to-body ratio, indicating failed breakout attempts): 0.15 weight Extended Runs : Consecutive bars above/below EMA20 without pullback 30+ bars: 0.15 weight (market hasn't paused to consolidate) Total exhaustion score is the sum of all applicable weights, capped at 1.0. Purpose : Detects when strong trends become vulnerable to reversal. High exhaustion can override trend filters, allowing counter-trend trades at genuine turning points that basic indicators would miss. Interpretation : Exhaustion > 0.75: High probability of climax — yellow background shading alerts you visually Exhaustion 0.50-0.75: Moderate overextension — watch for confirmation Exhaustion < 0.50: Fresh move — trend can continue, counter-trend trades higher risk 4. Adversarial Validation — Game Theory Applied to Trading This is BZ-CAE's signature innovation. Before approving any signal, the engine quantifies BOTH sides of the trade simultaneously: For Bullish Divergences , it calculates: Bull Case Score (0-1+) : Distance below EMA20 (pullback quality): up to 0.25 Bullish EMA alignment (close > EMA20 > EMA50): 0.25 Oversold RSI (< 40): 0.25 Volume confirmation (> 1.2x average): 0.25 Bear Case Score (0-1+) : Price below EMA50 (structural weakness): 0.30 Very oversold RSI (< 30, indicating knife-catching): 0.20 Differential = Bull Case - Bear Case If differential < -0.10 (default threshold), the bear case is dominating — signal is BLOCKED or ANNOTATED. For Bearish Divergences , the logic inverts (Bear Case vs Bull Case). Purpose : Prevents trades where you're fighting obvious strength in the opposite direction. This is institutional-grade risk management — don't just evaluate your trade, evaluate the counter-trade simultaneously. Why This Matters : You might see a bullish divergence at a local low, but if price is deeply below major support EMAs with strong bearish momentum, you're catching a falling knife. The adversarial check catches this and blocks the signal. 5. Confidence Scoring — 0 to 1 Quality Assessment Every signal that passes initial filters receives a comprehensive quality score: Formula : 0.30 × normalize(TCS) // Trend context + 0.25 × normalize(|DMA|) // Momentum magnitude + 0.20 × pullback_quality // Entry distance from EMA20 + 0.15 × state_quality // ADX + alignment + structure + 0.10 × divergence_strength // Slope separation magnitude + adversarial_bonus (0-0.30) // Your side's advantage Purpose : Ranks setup quality for filtering and position sizing decisions. You can set a minimum confidence threshold (default 0.35) to ensure only quality setups reach your chart. Interpretation : Confidence > 0.70: Premium setup — consider increased position size Confidence 0.50-0.70: Good quality — standard size Confidence 0.35-0.50: Acceptable — reduced size or skip if conservative Confidence < 0.35: Marginal — blocked in Filtering mode, annotated in Advisory mode CAE Operating Modes: Learning vs Enforcement Off : Disables all CAE logic. Raw divergence pipeline only. Use for baseline comparison. Advisory : Shows ALL signals regardless of CAE evaluation, but annotates signals that WOULD be blocked with specific warnings (e.g., "Bull: strong downtrend (TCS=0.87)" or "Adversarial bearish"). This is your learning mode — see CAE's decision logic in action without missing educational opportunities. Filtering : Actively blocks low-quality signals. Only setups that pass all enabled gates (Trend Filter, Adversarial Validation, Confidence Gating) reach your chart. This is your live trading mode — trust the system to enforce discipline. CAE Filter Gates: Three-Layer Protection When CAE is enabled, signals must pass through three independent gates (each can be toggled on/off): Gate 1: Strong Trend Filter If TCS ≥ tcs_threshold (default 0.80) And signal is counter-trend (bullish in downtrend or bearish in uptrend) And exhaustion < exhaustion_required (default 0.50) Then: BLOCK signal Logic: Don't fade strong trends unless the move is clearly overextended Gate 2: Adversarial Validation Calculate both bull case and bear case scores If opposing case dominates by more than adv_threshold (default 0.10) Then: BLOCK signal Logic: Avoid trades where you're fighting obvious strength in the opposite direction Gate 3: Confidence Gating Calculate composite confidence score (0-1) If confidence < min_confidence (default 0.35) Then: In Filtering mode, BLOCK signal; in Advisory mode, ANNOTATE with warning Logic: Only take setups with minimum quality threshold All three gates work together. A signal must pass ALL enabled gates to fire. Visual Intelligence System Bifurcation Zones (Supply/Demand Blocks) When a divergence signal fires, BZ-CAE draws a semi-transparent box extending 15 bars forward from the signal pivot: Demand Zones (Bullish) : Theme-colored box (cyan in Cyberpunk, blue in Professional, etc.) labeled "Demand" — marks where smart money likely placed buy orders as price diverged at the low. Supply Zones (Bearish) : Theme-colored box (magenta in Cyberpunk, orange in Professional) labeled "Supply" — marks where smart money likely placed sell orders as price diverged at the high. Theory : Divergences represent institutional disagreement with the crowd. The crowd pushed price to an extreme (new high or low), but momentum (oscillator) is waning, indicating smart money is taking the opposite side. These zones mark order placement areas that become future support/resistance. Use Cases : Exit targets: Take profit when price returns to opposite-side zone Re-entry levels: If price returns to your entry zone, consider adding Stop placement: Place stops just beyond your zone (below demand, above supply) Auto-Cleanup : System keeps the last 20 zones to prevent chart clutter. Adversarial Bar Coloring — Real-Time Market Debate Heatmap Each bar is colored based on the Bull Case vs Bear Case differential: Strong Bull Advantage (diff > 0.3): Full theme bull color (e.g., cyan) Moderate Bull Advantage (diff > 0.1): 50% transparency bull Neutral (diff -0.1 to 0.1): Gray/neutral theme Moderate Bear Advantage (diff < -0.1): 50% transparency bear Strong Bear Advantage (diff < -0.3): Full theme bear color (e.g., magenta) This creates a real-time visual heatmap showing which side is "winning" the market debate. When bars flip from cyan to magenta (or vice versa), you're witnessing a shift in adversarial advantage — a leading indicator of potential momentum changes. Exhaustion Shading When exhaustion score exceeds 0.75, the chart background displays a semi-transparent yellow highlight. This immediate visual warning alerts you that the current move is at high risk of reversal, even if trend indicators remain strong. Visual Themes — Six Aesthetic Options Cyberpunk : Cyan/Magenta/Yellow — High contrast, neon aesthetic, excellent for dark-themed trading environments Professional : Blue/Orange/Green — Corporate color palette, suitable for presentations and professional documentation Ocean : Teal/Red/Cyan — Aquatic palette, calming for extended monitoring sessions Fire : Orange/Red/Coral — Warm aggressive colors, high energy Matrix : Green/Red/Lime — Code aesthetic, homage to classic hacker visuals Monochrome : White/Gray — Minimal distraction, maximum focus on price action All visual elements (signal markers, zones, bar colors, dashboard) adapt to your selected theme. Divergence Engine — Core Detection System What Are Divergences? Divergences occur when price action and momentum indicators disagree, creating structural tension that often resolves in a change of direction: Regular Divergence (Reversal Signal) : Bearish Regular : Price makes higher high, oscillator makes lower high → Potential trend reversal down Bullish Regular : Price makes lower low, oscillator makes higher low → Potential trend reversal up Hidden Divergence (Continuation Signal) : Bearish Hidden : Price makes lower high, oscillator makes higher high → Downtrend continuation Bullish Hidden : Price makes higher low, oscillator makes lower low → Uptrend continuation Both types can be enabled/disabled independently in settings. Pivot Detection Methods BZ-CAE uses symmetric pivot detection with separate lookback and lookforward periods (default 5/5): Pivot High : Bar where high > all highs within lookback range AND high > all highs within lookforward range Pivot Low : Bar where low < all lows within lookback range AND low < all lows within lookforward range This ensures structural validity — the pivot must be a clear local extreme, not just a minor wiggle. Divergence Validation Requirements For a divergence to be confirmed, it must satisfy: Slope Disagreement : Price slope and oscillator slope must move in opposite directions (for regular divs) or same direction with inverted highs/lows (for hidden divs) Minimum Slope Change : |osc_slope| > min_slope_change / 100 (default 1.0) — filters weak, marginal divergences Maximum Lookback Range : Pivots must be within max_lookback bars (default 60) — prevents ancient, irrelevant divergences ATR-Normalized Strength : Divergence strength = min(|price_slope| × |osc_slope| × 10, 1.0) — quantifies the magnitude of disagreement in volatility context Regular divergences receive 1.0× weight; hidden divergences receive 0.8× weight (slightly less reliable historically). Oscillator Options — Five Professional Indicators RSI (Relative Strength Index) : Classic overbought/oversold momentum indicator. Best for: General purpose divergence detection across all instruments. Stochastic : Range-bound %K momentum comparing close to high-low range. Best for: Mean reversion strategies and range-bound markets. CCI (Commodity Channel Index) : Measures deviation from statistical mean, auto-normalized to 0-100 scale. Best for: Cyclical instruments and commodities. MFI (Money Flow Index) : Volume-weighted RSI incorporating money flow. Best for: Volume-driven markets like stocks and crypto. Williams %R : Inverse stochastic looking back over period, auto-adjusted to 0-100. Best for: Reversal detection at extremes. Each oscillator has adjustable length (2-200, default 14) and smoothing (1-20, default 1). You also set overbought (50-100, default 70) and oversold (0-50, default 30) thresholds. Signal Timing Modes — Understanding Repainting BZ-CAE offers two timing policies with complete transparency about repainting behavior: Realtime (1-bar, peak-anchored) How It Works : Detects peaks 1 bar ago using pattern: high > high AND high > high Signal prints on the NEXT bar after peak detection (bar_index) Visual marker anchors to the actual PEAK bar (bar_index - 1, offset -1) Signal locks in when bar CONFIRMS (closes) Repainting Behavior : On the FORMING bar (before close), the peak condition may change as new prices arrive Once bar CLOSES (barstate.isconfirmed), signal is locked permanently This is preview/early warning behavior by design Best For : Active monitoring and immediate alerts Learning the system (seeing signals develop in real-time) Responsive entry if you're watching the chart live Confirmed (lookforward) How It Works : Uses Pine Script's built-in ta.pivothigh() and ta.pivotlow() functions Requires full pivot validation period (lookback + lookforward bars) Signal prints pivot_lookforward bars after the actual peak (default 5-bar delay) Visual marker anchors to the actual peak bar (offset -pivot_lookforward) No Repainting Behavior Best For : Backtesting and historical analysis Conservative entries requiring full confirmation Automated trading systems Swing trading with larger timeframes Tradeoff : Delayed entry by pivot_lookforward bars (typically 5 bars) On a 5-minute chart, this is a 25-minute delay On a 4-hour chart, this is a 20-hour delay Recommendation : Use Confirmed for backtesting to verify system performance honestly. Use Realtime for live monitoring only if you're actively watching the chart and understand pre-confirmation repainting behavior. Signal Spacing System — Anti-Spam Architecture Even after CAE filtering, raw divergences can cluster. The spacing system enforces separation: Three Independent Filters 1. Min Bars Between ANY Signals (default 12): Prevents rapid-fire clustering across both directions If last signal (bull or bear) was within N bars, block new signal Ensures breathing room between all setups 2. Min Bars Between SAME-SIDE Signals (default 24, optional enforcement): Prevents bull-bull or bear-bear spam Separate tracking for bullish and bearish signal timelines Toggle enforcement on/off 3. Min ATR Distance From Last Signal (default 0, optional): Requires price to move N × ATR from last signal location Ensures meaningful price movement between setups 0 = disabled, 0.5-2.0 = typical range for enabled All three filters work independently. A signal must pass ALL enabled filters to proceed. Practical Guidance : Scalping (1-5m) : Any 6-10, Same-side 12-20, ATR 0-0.5 Day Trading (15m-1H) : Any 12, Same-side 24, ATR 0-1.0 Swing Trading (4H-D) : Any 20-30, Same-side 40-60, ATR 1.0-2.0 Dashboard — Real-Time Control Center The dashboard (toggleable, four corner positions, three sizes) provides comprehensive system intelligence: Oscillator Section Current oscillator type and value State: OVERBOUGHT / OVERSOLD / NEUTRAL (color-coded) Length parameter Cognitive Engine Section TCS (Trend Conviction Score) : Current value with emoji state indicator 🔥 = Strong trend (>0.75) 📊 = Moderate trend (0.50-0.75) 〰️ = Weak/choppy (<0.50) Color: Red if above threshold (trend filter active), yellow if moderate, green if weak DMA (Directional Momentum Alignment) : Current value with emoji direction indicator 🐂 = Bullish momentum (>0.5) ⚖️ = Balanced (-0.5 to 0.5) 🐻 = Bearish momentum (<-0.5) Color: Green if bullish, red if bearish Exhaustion : Current value with emoji warning indicator ⚠️ = High exhaustion (>0.75) 🟡 = Moderate (0.50-0.75) ✓ = Low (<0.50) Color: Red if high, yellow if moderate, green if low Pullback : Quality of current distance from EMA20 Values >0.6 are ideal entry zones (not too close, not too far) Bull Case / Bear Case (if Adversarial enabled): Current scores for both sides of the market debate Differential with emoji indicator: 📈 = Bull advantage (>0.2) ➡️ = Balanced (-0.2 to 0.2) 📉 = Bear advantage (<-0.2) Last Signal Metrics Section (New Feature) When a signal fires, this section captures and displays: Signal type (BULL or BEAR) Bars elapsed since signal Confidence % at time of signal TCS value at signal time DMA value at signal time Purpose : Provides a historical reference for learning. You can see what the market state looked like when the last signal fired, helping you correlate outcomes with conditions. Statistics Section Total Signals : Lifetime count across session Blocked Signals : Count and percentage (filter effectiveness metric) Bull Signals : Total bullish divergences Bear Signals : Total bearish divergences Purpose : System health monitoring. If blocked % is very high (>60%), filters may be too strict. If very low (<10%), filters may be too loose. Advisory Annotations When CAE Mode = Advisory, this section displays warnings for signals that would be blocked in Filtering mode: Examples: "Bull spacing: wait 8 bars" "Bear: strong uptrend (TCS=0.87)" "Adversarial bearish" "Low confidence 32%" Multiple warnings can stack, separated by " | ". This teaches you CAE's decision logic transparently. How to Use BZ-CAE — Complete Workflow Phase 1: Initial Setup (First Session) Apply BZ-CAE to your chart Select your preferred Visual Theme (Cyberpunk recommended for visibility) Set Signal Timing to "Confirmed (lookforward)" for learning Choose your Oscillator Type (RSI recommended for general use, length 14) Set Overbought/Oversold to 70/30 (standard) Enable both Regular Divergence and Hidden Divergence Set Pivot Lookback/Lookforward to 5/5 (balanced structure) Enable CAE Intelligence Set CAE Mode to "Advisory" (learning mode) Enable all three CAE filters: Strong Trend Filter , Adversarial Validation , Confidence Gating Enable Show Dashboard , position Top Right, size Normal Enable Draw Bifurcation Zones and Adversarial Bar Coloring Phase 2: Learning Period (Weeks 1-2) Goal : Understand how CAE evaluates market state and filters signals. Activities : Watch the dashboard during signals : Note TCS values when counter-trend signals fail — this teaches you the trend strength threshold for your instrument Observe exhaustion patterns at actual turning points — learn when overextension truly matters Study adversarial differential at signal times — see when opposing cases dominate Review blocked signals (orange X-crosses): In Advisory mode, you see everything — signals that would pass AND signals that would be blocked Check the advisory annotations to understand why CAE would block Track outcomes: Were the blocks correct? Did those signals fail? Use Last Signal Metrics : After each signal, check the dashboard capture of confidence, TCS, and DMA Journal these values alongside trade outcomes Identify patterns: Do confidence >0.70 signals work better? Does your instrument respect TCS >0.85? Understand your instrument's "personality" : Trending instruments (indices, major forex) may need TCS threshold 0.85-0.90 Choppy instruments (low-cap stocks, exotic pairs) may work best with TCS 0.70-0.75 High-volatility instruments (crypto) may need wider spacing Low-volatility instruments may need tighter spacing Phase 3: Calibration (Weeks 3-4) Goal : Optimize settings for your specific instrument, timeframe, and style. Calibration Checklist : Min Confidence Threshold : Review confidence distribution in your signal journal Identify the confidence level below which signals consistently fail Set min_confidence slightly above that level Day trading : 0.35-0.45 Swing trading : 0.40-0.55 Scalping : 0.30-0.40 TCS Threshold : Find the TCS level where counter-trend signals consistently get stopped out Set tcs_threshold at or slightly below that level Trending instruments : 0.85-0.90 Mixed instruments : 0.80-0.85 Choppy instruments : 0.75-0.80 Exhaustion Override Level : Identify exhaustion readings that marked genuine reversals Set exhaustion_required just below the average Typical range : 0.45-0.55 Adversarial Threshold : Default 0.10 works for most instruments If you find CAE is too conservative (blocking good trades), raise to 0.15-0.20 If signals are still getting caught in opposing momentum, lower to 0.07-0.09 Spacing Parameters : Count bars between quality signals in your journal Set min bars ANY to ~60% of that average Set min bars SAME-SIDE to ~120% of that average Scalping : Any 6-10, Same 12-20 Day trading : Any 12, Same 24 Swing : Any 20-30, Same 40-60 Oscillator Selection : Try different oscillators for 1-2 weeks each Track win rate and average winner/loser by oscillator type RSI : Best for general use, clear OB/OS Stochastic : Best for range-bound, mean reversion MFI : Best for volume-driven markets CCI : Best for cyclical instruments Williams %R : Best for reversal detection Phase 4: Live Deployment Goal : Disciplined execution with proven, calibrated system. Settings Changes : Switch CAE Mode from Advisory to Filtering System now actively blocks low-quality signals Only setups passing all gates reach your chart Keep Signal Timing on Confirmed for conservative entries OR switch to Realtime if you're actively monitoring and want faster entries (accept pre-confirmation repaint risk) Use your calibrated thresholds from Phase 3 Enable high-confidence alerts: "⭐ High Confidence Bullish/Bearish" (>0.70) Trading Discipline Rules : Respect Blocked Signals : If CAE blocks a trade you wanted to take, TRUST THE SYSTEM Don't manually override — if you consistently disagree, return to Phase 2/3 calibration The block exists because market state failed intelligence checks Confidence-Based Position Sizing : Confidence >0.70: Standard or increased size (e.g., 1.5-2.0% risk) Confidence 0.50-0.70: Standard size (e.g., 1.0% risk) Confidence 0.35-0.50: Reduced size (e.g., 0.5% risk) or skip if conservative TCS-Based Management : High TCS + counter-trend signal: Use tight stops, quick exits (you're fading momentum) Low TCS + reversal signal: Use wider stops, trail aggressively (genuine reversal potential) Exhaustion Awareness : Exhaustion >0.75 (yellow shading): Market is overextended, reversal risk is elevated — consider early exit or tighter trailing stops even on winning trades Exhaustion <0.30: Continuation bias — hold for larger move, wide trailing stops Adversarial Context : Strong differential against you (e.g., bullish signal with bear diff <-0.2): Use very tight stops, consider skipping Strong differential with you (e.g., bullish signal with bull diff >0.2): Trail aggressively, this is your tailwind Practical Settings by Timeframe & Style Scalping (1-5 Minute Charts) Objective : High frequency, tight stops, quick reversals in fast-moving markets. Oscillator : Type: RSI or Stochastic (fast response to quick moves) Length: 9-11 (more responsive than standard 14) Smoothing: 1 (no lag) OB/OS: 65/35 (looser thresholds ensure frequent crossings in fast conditions) Divergence : Pivot Lookback/Lookforward: 3/3 (tight structure, catch small swings) Max Lookback: 40-50 bars (recent structure only) Min Slope Change: 0.8-1.0 (don't be overly strict) CAE : Mode: Advisory first (learn), then Filtering Min Confidence: 0.30-0.35 (lower bar for speed, accept more signals) TCS Threshold: 0.70-0.75 (allow more counter-trend opportunities) Exhaustion Required: 0.45-0.50 (moderate override) Strong Trend Filter: ON (still respect major intraday trends) Adversarial: ON (critical for scalping protection — catches bad entries quickly) Spacing : Min Bars ANY: 6-10 (fast pace, many setups) Min Bars SAME-SIDE: 12-20 (prevent clustering) Min ATR Distance: 0 or 0.5 (loose) Timing : Realtime (speed over precision, but understand repaint risk) Visuals : Signal Size: Tiny (chart clarity in busy conditions) Show Zones: Optional (can clutter on low timeframes) Bar Coloring: ON (helps read momentum shifts quickly) Dashboard: Small size (corner reference, not main focus) Key Consideration : Scalping generates noise. Even with CAE, expect lower win rate (45-55%) but aim for favorable R:R (2:1 or better). Size conservatively. Day Trading (15-Minute to 1-Hour Charts) Objective : Balance quality and frequency. Standard divergence trading approach. Oscillator : Type: RSI or MFI (proven reliability, volume confirmation with MFI) Length: 14 (industry standard, well-studied) Smoothing: 1-2 OB/OS: 70/30 (classic levels) Divergence : Pivot Lookback/Lookforward: 5/5 (balanced structure) Max Lookback: 60 bars Min Slope Change: 1.0 (standard strictness) CAE : Mode: Filtering (enforce discipline from the start after brief Advisory learning) Min Confidence: 0.35-0.45 (quality filter without being too restrictive) TCS Threshold: 0.80-0.85 (respect strong trends) Exhaustion Required: 0.50 (balanced override threshold) Strong Trend Filter: ON Adversarial: ON Confidence Gating: ON (all three filters active) Spacing : Min Bars ANY: 12 (breathing room between all setups) Min Bars SAME-SIDE: 24 (prevent bull/bear clusters) Min ATR Distance: 0-1.0 (optional refinement, typically 0.5-1.0) Timing : Confirmed (1-bar delay for reliability, no repainting) Visuals : Signal Size: Tiny or Small Show Zones: ON (useful reference for exits/re-entries) Bar Coloring: ON (context awareness) Dashboard: Normal size (full visibility) Key Consideration : This is the "sweet spot" timeframe for BZ-CAE. Market structure is clear, CAE has sufficient data, and signal frequency is manageable. Expect 55-65% win rate with proper execution. Swing Trading (4-Hour to Daily Charts) Objective : Quality over quantity. High conviction only. Larger stops and targets. Oscillator : Type: RSI or CCI (robust on higher timeframes, smooth longer waves) Length: 14-21 (capture larger momentum swings) Smoothing: 1-3 OB/OS: 70/30 or 75/25 (strict extremes) Divergence : Pivot Lookback/Lookforward: 5/5 or 7/7 (structural purity, major swings only) Max Lookback: 80-100 bars (broader historical context) Min Slope Change: 1.2-1.5 (require strong, undeniable divergence) CAE : Mode: Filtering (strict enforcement, premium setups only) Min Confidence: 0.40-0.55 (high bar for entry) TCS Threshold: 0.85-0.95 (very strong trend protection — don't fade established HTF trends) Exhaustion Required: 0.50-0.60 (higher bar for override — only extreme exhaustion justifies counter-trend) Strong Trend Filter: ON (critical on HTF) Adversarial: ON (avoid obvious bad trades) Confidence Gating: ON (quality gate essential) Spacing : Min Bars ANY: 20-30 (substantial separation) Min Bars SAME-SIDE: 40-60 (significant breathing room) Min ATR Distance: 1.0-2.0 (require meaningful price movement) Timing : Confirmed (purity over speed, zero repaint for swing accuracy) Visuals : Signal Size: Small or Normal (clear markers on zoomed-out view) Show Zones: ON (important HTF levels) Bar Coloring: ON (long-term trend awareness) Dashboard: Normal or Large (comprehensive analysis) Key Consideration : Swing signals are rare but powerful. Expect 2-5 signals per month per instrument. Win rate should be 60-70%+ due to stringent filtering. Position size can be larger given confidence. Dashboard Interpretation Reference TCS (Trend Conviction Score) States 0.00-0.50: Weak/Choppy Emoji: 〰️ Color: Green/cyan Meaning: No established trend. Range-bound or consolidating. Both reversal and continuation signals viable. Action: Reversals (regular divs) are safer. Use wider profit targets (market has room to move). Consider mean reversion strategies. 0.50-0.75: Moderate Trend Emoji: 📊 Color: Yellow/neutral Meaning: Developing trend but not locked in. Context matters significantly. Action: Check DMA and exhaustion. If DMA confirms trend and exhaustion is low, favor continuation (hidden divs). If exhaustion is high, reversals are viable. 0.75-0.85: Strong Trend Emoji: 🔥 Color: Orange/warning Meaning: Well-established trend with persistence. Counter-trend is high risk. Action: Require exhaustion >0.50 for counter-trend entries. Favor continuation signals. Use tight stops on counter-trend attempts. 0.85-1.00: Very Strong Trend Emoji: 🔥🔥 Color: Red/danger (if counter-trading) Meaning: Locked-in institutional trend. Extremely high risk to fade. Action: Avoid counter-trend unless exhaustion >0.75 (yellow shading). Focus exclusively on continuation opportunities. Momentum is king here. DMA (Directional Momentum Alignment) Zones -2.0 to -1.0: Strong Bearish Momentum Emoji: 🐻🐻 Color: Dark red Meaning: Powerful downside force. Sellers are in control. Action: Bullish divergences are counter-momentum (high risk). Bearish divergences are with-momentum (lower risk). Size down on longs. -0.5 to 0.5: Neutral/Balanced Emoji: ⚖️ Color: Gray/neutral Meaning: No strong directional bias. Choppy or consolidating. Action: Both directions have similar probability. Focus on confidence score and adversarial differential for edge. 1.0 to 2.0: Strong Bullish Momentum Emoji: 🐂🐂 Color: Bright green/cyan Meaning: Powerful upside force. Buyers are in control. Action: Bearish divergences are counter-momentum (high risk). Bullish divergences are with-momentum (lower risk). Size down on shorts. Exhaustion States 0.00-0.50: Fresh Move Emoji: ✓ Color: Green Meaning: Trend is healthy, not overextended. Room to run. Action: Counter-trend trades are premature. Favor continuation. Hold winners for larger moves. Avoid early exits. 0.50-0.75: Mature Move Emoji: 🟡 Color: Yellow Meaning: Move is aging. Watch for signs of climax. Action: Tighten trailing stops on winning trades. Be ready for reversals. Don't add to positions aggressively. 0.75-0.85: High Exhaustion Emoji: ⚠️ Color: Orange Background: Yellow shading appears Meaning: Move is overextended. Reversal risk elevated significantly. Action: Counter-trend reversals are higher probability. Consider early exits on with-trend positions. Size up on reversal divergences (if CAE allows). 0.85-1.00: Critical Exhaustion Emoji: ⚠️⚠️ Color: Red Background: Yellow shading intensifies Meaning: Climax conditions. Reversal imminent or underway. Action: Aggressive reversal trades justified. Exit all with-trend positions. This is where major turns occur. Confidence Score Tiers 0.00-0.30: Low Quality Color: Red Status: Blocked in Filtering mode Action: Skip entirely. Setup lacks fundamental quality across multiple factors. 0.30-0.50: Moderate Quality Color: Yellow/orange Status: Marginal — passes in Filtering only if >min_confidence Action: Reduced position size (0.5-0.75% risk). Tight stops. Conservative profit targets. Skip if you're selective. 0.50-0.70: High Quality Color: Green/cyan Status: Good setup across most quality factors Action: Standard position size (1.0-1.5% risk). Normal stops and targets. This is your bread-and-butter trade. 0.70-1.00: Premium Quality Color: Bright green/gold Status: Exceptional setup — all factors aligned Visual: Double confidence ring appears Action: Consider increased position size (1.5-2.0% risk, maximum). Wider stops. Larger targets. High probability of success. These are rare — capitalize when they appear. Adversarial Differential Interpretation Bull Differential > 0.3 : Visual: Strong cyan/green bar colors Meaning: Bull case strongly dominates. Buyers have clear advantage. Action: Bullish divergences favored (with-advantage). Bearish divergences face headwind (reduce size or skip). Momentum is bullish. Bull Differential 0.1 to 0.3 : Visual: Moderate cyan/green transparency Meaning: Moderate bull advantage. Buyers have edge but not overwhelming. Action: Both directions viable. Slight bias toward longs. Differential -0.1 to 0.1 : Visual: Gray/neutral bars Meaning: Balanced debate. No clear advantage either side. Action: Rely on other factors (confidence, TCS, exhaustion) for direction. Adversarial is neutral. Bear Differential -0.3 to -0.1 : Visual: Moderate red/magenta transparency Meaning: Moderate bear advantage. Sellers have edge but not overwhelming. Action: Both directions viable. Slight bias toward shorts. Bear Differential < -0.3 : Visual: Strong red/magenta bar colors Meaning: Bear case strongly dominates. Sellers have clear advantage. Action: Bearish divergences favored (with-advantage). Bullish divergences face headwind (reduce size or skip). Momentum is bearish. Last Signal Metrics — Post-Trade Analysis After a signal fires, dashboard captures: Type : BULL or BEAR Bars Ago : How long since signal (updates every bar) Confidence : What was the quality score at signal time TCS : What was trend conviction at signal time DMA : What was momentum alignment at signal time Use Case : Post-trade journaling and learning. Example: "BULL signal 12 bars ago. Confidence: 68%, TCS: 0.42, DMA: -0.85" Analysis : This was a bullish reversal (regular div) with good confidence, weak trend (TCS), but strong bearish momentum (DMA). The bet was that momentum would reverse — a counter-momentum play requiring exhaustion confirmation. Check if exhaustion was high at that time to justify the entry. Track patterns: Do your best trades have confidence >0.65? Do low-TCS signals (<0.50) work better for you? Are you more successful with-momentum (DMA aligned with signal) or counter-momentum? Troubleshooting Guide Problem: No Signals Appearing Symptoms : Chart loads, dashboard shows metrics, but no divergence signals fire. Diagnosis Checklist : Check dashboard oscillator value : Is it crossing OB/OS levels (70/30)? If oscillator stays in 40-60 range constantly, it can't reach extremes needed for divergence detection. Are pivots forming? : Look for local swing highs/lows on your chart. If price is in tight consolidation, pivots may not meet lookback/lookforward requirements. Is spacing too tight? : Check "Last Signal" metrics — how many bars since last signal? If <12 and your min_bars_ANY is 12, spacing filter is blocking. Is CAE blocking everything? : Check dashboard Statistics section — what's the blocked signal count? High blocks indicate overly strict filters. Solutions : Loosen OB/OS Temporarily : Try 65/35 to verify divergence detection works If signals appear, the issue was threshold strictness Gradually tighten back to 67/33, then 70/30 as appropriate Lower Min Confidence : Try 0.25-0.30 (diagnostic level) If signals appear, filter was too strict Raise gradually to find sweet spot (0.35-0.45 typical) Disable Strong Trend Filter Temporarily : Turn off in CAE settings If signals appear, TCS threshold was blocking everything Re-enable and lower TCS_threshold to 0.70-0.75 Reduce Min Slope Change : Try 0.7-0.8 (from default 1.0) Allows weaker divergences through Helpful on low-volatility instruments Widen Spacing : Set min_bars_ANY to 6-8 Set min_bars_SAME_SIDE to 12-16 Reduces time between allowed signals Check Timing Mode : If using Confirmed, remember there's a pivot_lookforward delay (5+ bars) Switch to Realtime temporarily to verify system is working Realtime has no delay but repaints Verify Oscillator Settings : Length 14 is standard but might not fit all instruments Try length 9-11 for faster response Try length 18-21 for slower, smoother response Problem: Too Many Signals (Signal Spam) Symptoms : Dashboard shows 50+ signals in Statistics, confidence scores mostly <0.40, signals clustering close together. Solutions : Raise Min Confidence : Try 0.40-0.50 (quality filter) Blocks bottom-tier setups Targets top 50-60% of divergences only Tighten OB/OS : Use 70/30 or 75/25 Requires more extreme oscillator readings Reduces false divergences in mid-range Increase Min Slope Change : Try 1.2-1.5 (from default 1.0) Requires stronger, more obvious divergences Filters marginal slope disagreements Raise TCS Threshold : Try 0.85-0.90 (from default 0.80) Stricter trend filter blocks more counter-trend attempts Favors only strongest trend alignment Enable ALL CAE Gates : Turn on Trend Filter + Adversarial + Confidence Triple-layer protection Blocks aggressively — expect 20-40% reduction in signals Widen Spacing : min_bars_ANY: 15-20 (from 12) min_bars_SAME_SIDE: 30-40 (from 24) Creates substantial breathing room Switch to Confirmed Timing : Removes realtime preview noise Ensures full pivot validation 5-bar delay filters many false starts Problem: Signals in Strong Trends Get Stopped Out Symptoms : You take a bullish divergence in a downtrend (or bearish in uptrend), and it immediately fails. Dashboard showed high TCS at the time. Analysis : This is INTENDED behavior — CAE is protecting you from low-probability counter-trend trades. Understanding : Check Last Signal Metrics in dashboard — what was TCS when signal fired? If TCS was >0.85 and signal was counter-trend, CAE correctly identified it as high risk Strong trends rarely reverse cleanly without major exhaustion Your losses here are the system working as designed (blocking bad odds) If You Want to Override (Not Recommended) : Lower TCS_threshold to 0.70-0.75 (allows more counter-trend) Lower exhaustion_required to 0.40 (easier override) Disable Strong Trend Filter entirely (very risky) Better Approach : TRUST THE FILTER — it's preventing costly mistakes Wait for exhaustion >0.75 (yellow shading) before counter-trending strong TCS Focus on continuation signals (hidden divs) in high-TCS environments Use Advisory mode to see what CAE is blocking and learn from outcomes Problem: Adversarial Blocking Seems Wrong Symptoms : You see a divergence that "looks good" visually, but CAE blocks with "Adversarial bearish/bullish" warning. Diagnosis : Check dashboard Bull Case and Bear Case scores at that moment Look at Differential value Check adversarial bar colors — was there strong coloring against your intended direction? Understanding : Adversarial catches "obvious" opposing momentum that's easy to miss Example: Bullish divergence at a local low, BUT price is deeply below EMA50, bearish momentum is strong, and RSI shows knife-catching conditions Bull Case might be 0.20 while Bear Case is 0.55 Differential = -0.35, far beyond threshold Block is CORRECT — you'd be fighting overwhelming opposing flow If You Disagree Consistently Review blocked signals on chart — scroll back and check outcomes Did those blocked signals actually work, or did they fail as adversarial predicted? Raise adv_threshold to 0.15-0.20 (more permissive, allows closer battles) Disable Adversarial Validation temporarily (diagnostic) to isolate its effect Use Advisory mode to learn adversarial patterns over 50-100 signals Remember : Adversarial is conservative BY DESIGN. It prevents "obvious" bad trades where you're fighting strong strength the other way. Problem: Dashboard Not Showing or Incomplete Solutions : Toggle "Show Dashboard" to ON in settings Try different dashboard sizes (Small/Normal/Large) Try different positions (Top Left/Right, Bottom Left/Right) — might be off-screen Some sections require CAE Enable = ON (Cognitive Engine section won't appear if CAE is disabled) Statistics section requires at least 1 lifetime signal to populate Check that visual theme is set (dashboard colors adapt to theme) Problem: Performance Lag, Chart Freezing Symptoms : Chart loading is slow, indicator calculations cause delays, pinch-to-zoom lags. Diagnosis : Visual features are computationally expensive, especially adversarial bar coloring (recalculates every bar). Solutions (In Order of Impact) : Disable Adversarial Bar Coloring (MOST EXPENSIVE): Turn OFF "Adversarial Bar Coloring" in settings This is the single biggest performance drain Immediate improvement Reduce Vertical Lines : Lower "Keep last N vertical lines" to 20-30 Or set to 0 to disable entirely Moderate improvement Disable Bifurcation Zones : Turn OFF "Draw Bifurcation Zones" Reduces box drawing calculations Moderate improvement Set Dashboard Size to Small : Smaller dashboard = fewer cells = less rendering Minor improvement Use Shorter Max Lookback : Reduce max_lookback to 40-50 (from 60+) Fewer bars to scan for divergences Minor improvement Disable Exhaustion Shading : Turn OFF "Show Market State" Removes background coloring calculations Minor improvement Extreme Performance Mode : Disable ALL visual enhancements Keep only triangle markers Dashboard Small or OFF Use Minimal theme if available Problem: Realtime Signals Repainting Symptoms : You see a signal appear, but on next bar it disappears or moves. Explanation : Realtime mode detects peaks 1 bar ago: high > high AND high > high On the FORMING bar (before close), this condition can change as new prices arrive Example: At 10:05, high (10:04 bar) was 100, current high is 99 → peak detected At 10:05:30, new high of 101 arrives → peak condition breaks → signal disappears At 10:06 (bar close), final high is 101 → no peak at 10:04 anymore → signal gone permanently This is expected behavior for realtime responsiveness. You get preview/early warning, but it's not locked until bar confirms. Solutions : Use Confirmed Timing : Switch to "Confirmed (lookforward)" mode ZERO repainting — pivot must be fully validated 5-bar delay (pivot_lookforward) What you see in history is exactly what would have appeared live Accept Realtime Repaint as Tradeoff : Keep Realtime mode for speed and alerts Understand that pre-confirmation signals may vanish Only trade signals that CONFIRM at bar close (check barstate.isconfirmed) Use for live monitoring, NOT for backtesting Trade Only After Confirmation : In Realtime mode, wait 1 full bar after signal appears before entering If signal survives that bar close, it's locked This adds 1-bar delay but removes repaint risk Recommendation : Use Confirmed for backtesting and conservative trading. Use Realtime only for active monitoring with full understanding of preview behavior. Risk Management Integration BZ-CAE is a signal generation system, not a complete trading strategy. You must integrate proper risk management: Position Sizing by Confidence Confidence 0.70-1.00 (Premium) : Risk: 1.5-2.0% of account (MAXIMUM) Reasoning: High-quality setup across all factors Still cap at 2% — even premium setups can fail Confidence 0.50-0.70 (High Quality) : Risk: 1.0-1.5% of account Reasoning: Standard good setup Your bread-and-butter risk level Confidence 0.35-0.50 (Moderate Quality) : Risk: 0.5-1.0% of account Reasoning: Marginal setup, passes minimum threshold Reduce size or skip if you're selective Confidence <0.35 (Low Quality) : Risk: 0% (blocked in Filtering mode) Reasoning: Insufficient quality factors System protects you by not showing these Stop Placement Strategies For Reversal Signals (Regular Divergences) : Place stop beyond the divergence pivot plus buffer Bullish : Stop below the divergence low - 1.0-1.5 × ATR Bearish : Stop above the divergence high + 1.0-1.5 × ATR Reasoning: If price breaks the pivot, divergence structure is invalidated For Continuation Signals (Hidden Divergences) : Place stop beyond recent swing in opposite direction Bullish continuation : Stop below recent swing low (not the divergence pivot itself) Bearish continuation : Stop above recent swing high Reasoning: You're trading with trend, allow more breathing room ATR-Based Stops : 1.5-2.0 × ATR is standard Scale by timeframe: Scalping (1-5m): 1.0-1.5 × ATR (tight) Day trading (15m-1H): 1.5-2.0 × ATR (balanced) Swing (4H-D): 2.0-3.0 × ATR (wide) Never Use Fixed Dollar/Pip Stops : Markets have different volatility 50-pip stop on EUR/USD ≠ 50-pip stop on GBP/JPY Always normalize by ATR or pivot structure Profit Targets and Scaling Primary Target : 2-3 × ATR from entry (minimum 2:1 reward-risk) Example : Entry at 100, ATR = 2, stop at 97 (1.5 × ATR) → target at 106 (3 × ATR) = 2:1 R:R Scaling Out Strategy : Take 50% off at 1.5 × ATR (secure partial profit) Move stop to breakeven Trail remaining 50% with 1.0 × ATR trailing stop Let winners run if trend persists Targets by Confidence : High Confidence (>0.70) : Aggressive targets (3-4 × ATR), trail wider (1.5 × ATR) Standard Confidence (0.50-0.70) : Normal targets (2-3 × ATR), standard trail (1.0 × ATR) Low Confidence (0.35-0.50) : Conservative targets (1.5-2 × ATR), tight trail (0.75 × ATR) Use Bifurcation Zones : If opposite-side zone is visible on chart (from previous signal), use it as target Example : Bullish signal at 100, prior supply zone at 110 → use 110 as target Zones mark institutional resistance/support Exhaustion-Based Exits : If you're in a trade and exhaustion >0.75 develops (yellow shading), consider early exit Market is overextended — reversal risk is high Take profit even if target not reached Trade Management by TCS High TCS + Counter-Trend Trade (Risky) : Use very tight stops (1.0-1.5 × ATR) Conservative targets (1.5-2 × ATR) Quick exit if trade doesn't work immediately You're fading momentum — respect it Low TCS + Reversal Trade (Safer) : Use wider stops (2.0-2.5 × ATR) Aggressive targets (3-4 × ATR) Trail with patience Genuine reversal potential in weak trend High TCS + Continuation Trade (Safest) : Standard stops (1.5-2.0 × ATR) Very aggressive targets (4-5 × ATR) Trail wide (1.5-2.0 × ATR) You're with institutional momentum — let it run Educational Value — Learning Machine Intelligence BZ-CAE is designed as a learning platform, not just a tool: Advisory Mode as Teacher Most indicators are binary: signal or no signal. You don't learn WHY certain setups are better. BZ-CAE's Advisory mode shows you EVERY potential divergence, then annotates the ones that would be blocked in Filtering mode with specific reasons: "Bull: strong downtrend (TCS=0.87)" teaches you that TCS >0.85 makes counter-trend very risky "Adversarial bearish" teaches you that the opposing case was dominating "Low confidence 32%" teaches you that the setup lacked quality across multiple factors "Bull spacing: wait 8 bars" teaches you that signals need breathing room After 50-100 signals in Advisory mode, you internalize the CAE's decision logic. You start seeing these factors yourself BEFORE the indicator does. Dashboard Transparency Most "intelligent" indicators are black boxes — you don't know how they make decisions. BZ-CAE shows you ALL metrics in real-time: TCS tells you trend strength DMA tells you momentum alignment Exhaustion tells you overextension Adversarial shows both sides of the debate Confidence shows composite quality You learn to interpret market state holistically, a skill applicable to ANY trading system beyond this indicator. Divergence Quality Education Not all divergences are equal. BZ-CAE teaches you which conditions produce high-probability setups: Quality divergence : Regular bullish div at a low, TCS <0.50 (weak trend), exhaustion >0.75 (overextended), positive adversarial differential, confidence >0.70 Low-quality divergence : Regular bearish div at a high, TCS >0.85 (strong uptrend), exhaustion <0.30 (not overextended), negative adversarial differential, confidence <0.40 After using the system, you can evaluate divergences manually with similar intelligence. Risk Management Discipline Confidence-based position sizing teaches you to adjust risk based on setup quality, not emotions: Beginners often size all trades identically Or worse, size UP on marginal setups to "make up" for losses BZ-CAE forces systematic sizing: premium setups get larger size, marginal setups get smaller size This creates a probabilistic approach where your edge compounds over time. What This Indicator Is NOT Complete transparency about limitations and positioning: Not a Prediction System BZ-CAE does not predict future prices. It identifies structural divergences (price-momentum disagreements) and assesses current market state (trend, exhaustion, adversarial conditions). It tells you WHEN conditions favor a potential reversal or continuation, not WHAT WILL HAPPEN. Markets are probabilistic. Even premium-confidence setups fail ~30-40% of the time. The system improves your probability distribution over many trades — it doesn't eliminate risk. Not Fully Automated This is a decision support tool, not a trading robot. You must: Execute trades manually based on signals Manage positions (stops, targets, trailing) Apply discretionary judgment (news events, liquidity, context) Integrate with your broader strategy and risk rules The confidence scores guide position sizing, but YOU determine final risk allocation based on your account size, risk tolerance, and portfolio context. Not Beginner-Friendly BZ-CAE requires understanding of: Divergence trading concepts (regular vs hidden, reversal vs continuation) Market state interpretation (trend vs range, momentum, exhaustion) Basic technical analysis (pivots, support/resistance, EMAs) Risk management fundamentals (position sizing, stops, R:R) This is designed for intermediate to advanced traders willing to invest time learning the system. If you want "buy the arrow" simplicity, this isn't the tool. Not a Holy Grail There is no perfect indicator. BZ-CAE filters noise and improves signal quality significantly, but: Losing trades are inevitable (even at 70% win rate, 30% still fail) Market conditions change rapidly (yesterday's strong trend becomes today's chop) Black swan events occur (fundamentals override technicals) Execution matters (slippage, fees, emotional discipline) The system provides an EDGE, not a guarantee. Your job is to execute that edge consistently with proper risk management over hundreds of trades. Not Financial Advice BZ-CAE is an educational and analytical tool. All trading decisions are your responsibility. Past performance (backtested or live) does not guarantee future results. Only risk capital you can afford to lose. Consult a licensed financial advisor for investment advice specific to your situation. Ideal Market Conditions Best Performance Characteristics Liquid Instruments : Major forex pairs (EUR/USD, GBP/USD, USD/JPY) Large-cap stocks and index ETFs (SPY, QQQ, AAPL, MSFT) High-volume crypto (BTC, ETH) Major commodities (Gold, Oil, Natural Gas) Reasoning: Clean price structure, clear pivots, meaningful oscillator behavior Trending with Consolidations : Markets that trend for 20-40 bars, then consolidate 10-20 bars, repeat Creates divergences at consolidation boundaries (reversals) and within trends (continuations) Both regular and hidden divs find opportunities 5-Minute to Daily Timeframes : Below 5m: too much noise, false pivots, CAE metrics unstable Above daily: too few signals, edge diminishes (fundamentals dominate) Sweet spot: 15m to 4H for most traders Consistent Volume and Participation : Regular trading sessions (not holidays or thin markets) Predictable volatility patterns Avoid instruments with sudden gaps or circuit breakers Challenging Conditions Extremely Low Liquidity : Penny stocks, exotic forex pairs, low-volume crypto Erratic pivots, unreliable oscillator readings CAE metrics can't assess market state properly Very Low Timeframes (1-Minute or Below) : Dominated by market microstructure noise Divergences are everywhere but meaningless CAE filtering helps but still unreliable Extended Sideways Consolidation : 100+ bars of tight range with no clear pivots Oscillator hugs midpoint (45-55 range) No divergences to detect Fundamentally-Driven Gap Markets : Earnings releases, economic data, geopolitical events Price gaps over stops and targets Technical structure breaks down Recommendation: Disable trading around known events Calculation Methodology — Technical Depth For users who want to understand the math: Oscillator Computation Each oscillator type calculates differently, but all normalize to 0-100: RSI : ta.rsi(close, length) — Standard Relative Strength Index Stochastic : ta.stoch(high, low, close, length) — %K calculation CCI : (ta.cci(hlc3, length) + 100) / 2 — Normalized from -100/+100 to 0-100 MFI : ta.mfi(hlc3, length) — Volume-weighted RSI equivalent Williams %R : ta.wpr(length) + 100 — Inverted stochastic adjusted to 0-100 Smoothing: If smoothing > 1, apply ta.sma(oscillator, smoothing) Divergence Detection Algorithm Identify Pivots : Price high pivot: ta.pivothigh(high, lookback, lookforward) Price low pivot: ta.pivotlow(low, lookback, lookforward) Oscillator high pivot: ta.pivothigh(osc, lookback, lookforward) Oscillator low pivot: ta.pivotlow(osc, lookback, lookforward) Store Recent Pivots : Maintain arrays of last 10 pivots with bar indices When new pivot confirmed, unshift to array, pop oldest if >10 Scan for Slope Disagreements : Loop through last 5 pivots For each pair (current pivot, historical pivot): Check if within max_lookback bars Calculate slopes: (current - historical) / bars_between Regular bearish: price_slope > 0, osc_slope < 0, |osc_slope| > min_threshold Regular bullish: price_slope < 0, osc_slope > 0, |osc_slope| > min_threshold Hidden bearish: price_slope < 0, osc_slope > 0, osc_slope > min_threshold Hidden bullish: price_slope > 0, osc_slope < 0, |osc_slope| > min_threshold Important Disclaimers and Terms Performance Disclosure Past performance, whether backtested or live-traded, does not guarantee future results. Markets change. What works today may not work tomorrow. Hypothetical or simulated performance results have inherent limitations and do not represent actual trading. Risk of Loss Trading involves substantial risk of loss. Only trade with risk capital you can afford to lose entirely. The high degree of leverage often available in trading can work against you as well as for you. Leveraged trading may result in losses exceeding your initial deposit. Not Financial Advice BZ-CAE is an educational and analytical tool for technical analysis. It is not financial advice, investment advice, or a recommendation to buy or sell any security or instrument. All trading decisions are your sole responsibility. Consult a licensed financial advisor for advice specific to your circumstances. Technical Indicator Limitations BZ-CAE is a technical analysis tool based on price and volume data. It does not account for: Fundamental analysis (earnings, economic data, financial health) Market sentiment and positioning Geopolitical events and news Liquidity conditions and market microstructure changes Regulatory changes or exchange rules Integrate with broader analysis and strategy. Do not rely solely on technical indicators for trading decisions. Repainting Acknowledgment As disclosed throughout this documentation: Realtime mode may repaint on forming bars before confirmation (by design for preview functionality) Confirmed mode has zero repainting (fully validated pivots only) Choose timing mode appropriate for your use case. Understand the tradeoffs. Testing Recommendation ALWAYS test on demo/paper accounts before committing real capital. Validate the indicator's behavior on your specific instruments and timeframes. Learn the system thoroughly in Advisory mode before using Filtering mode. Learning Resources : In-indicator tooltips (hover over setting names for detailed explanations) This comprehensive publishing statement (save for reference) User guide in script comments (top of code) Final Word — Philosophy of BZ-CAE BZ-CAE is not designed to replace your judgment — it's designed to enhance it. The indicator identifies structural inflection points (bifurcations) where price and momentum disagree. The Cognitive Engine evaluates market state to determine if this disagreement is meaningful or noise. The Adversarial model debates both sides of the trade to catch obvious bad setups. The Confidence system ranks quality so you can choose your risk appetite. But YOU still execute. YOU still manage risk. YOU still learn from outcomes. This is intelligence amplification, not intelligence replacement. Use Advisory mode to learn how expert traders evaluate market state. Use Filtering mode to enforce discipline when emotions run high. Use the dashboard to develop a systematic approach to reading markets. Use confidence scores to size positions probabilistically. The system provides an edge. Your job is to execute that edge with discipline, patience, and proper risk management over hundreds of trades. Markets are probabilistic. No system wins every trade. But a systematic edge + disciplined execution + proper risk management compounds over time. That's the path to consistent profitability. BZ-CAE gives you the edge. The discipline and risk management are on you. Taking you to school. — Dskyz, Trade with insight. Trade with anticipation.
Индикатор Pine Script®
от DskyzInvestments
Holographic Market Microstructure | AlphaNattHolographic Market Microstructure | AlphaNatt A multidimensional, holographically-rendered framework designed to expose the invisible forces shaping every candle — liquidity voids, smart money footprints, order flow imbalances, and structural evolution — in real time. --- 📘 Overview The Holographic Market Microstructure (HMS) is not a traditional indicator. It’s a visual architecture built to interpret the true anatomy of the market — a living data structure that fuses price, volume, and liquidity into one coherent holographic layer. Instead of reacting to candles, HMS visualizes the market’s underlying micro-dynamics : where liquidity hides, where volume flows, and how structure morphs as smart money accumulates or distributes. Designed for system-based traders, volume analysts, and liquidity theorists who demand to see the unseen — the invisible grid driving every price movement. --- 🔬 Core Analytical Modules Microstructure Analysis Deconstructs each bar’s internal composition to identify imbalance between aggressive buying and selling. Using a configurable Imbalance Ratio and Liquidity Threshold , the algorithm marks low-liquidity zones and price inefficiencies as “liquidity voids.” • Detects hidden supply/demand gaps. • Quantifies micro-level absorption and exhaustion. • Reveals flow compression and expansion phases. Smart Money Tracking Applies advanced volume-rate-of-change and price momentum relationships to map institutional activity. • Accumulation Zones – Where price rises on expanding volume. • Distribution Zones – Where price declines on rising volume. • Automatically visualized as glowing boxes, layered through time to simulate footprint persistence. Fractal Structure Mapping Reveals the recursive nature of price formation. HMS detects fractal highs/lows, then connects them into an evolving structure. • Defines nested market structure across multiple scales. • Maps trend progression and transition points. • Renders with adaptive glow lines to reflect depth and strength. Volume Heat Map Transforms historical volume data into a 3D holographic heat projection. • Each band represents a volume-weighted price level. • Gradient brightness = relative participation intensity. • Helps identify volume nodes, voids, and liquidity corridors. HUD Display System Real-time analytical dashboard summarizing the system’s internal metrics directly on the chart. • Flow, Structure, Smart$, Liquidity, and Divergence — all live. • Designed for both scalpers and swing traders to assess micro-context instantly. --- 🧠 Smart Money Intelligence Layer The Smart Money Index dynamically evaluates the harmony (or conflict) between price momentum and volume acceleration. When institutions accumulate or distribute discreetly, volume surges ahead of price. HMS detects this divergence and overlays it as glowing smart money zones. ◈ ACCUM → Institutional absorption, early uptrend formation. ◈ DISTRIB → Distribution and top-heavy conditions. ○ IDLE → Neutral flow equilibrium. Divergences between price and volume are signaled using holographic alerts ( ⚠ ALERT ) to highlight exhaustion or trap conditions — often precursors to structural reversals. --- 🌀 Fractal Market Structure Engine The fractal subsystem recursively identifies local pivot symmetry, connecting micro-structural highs and lows into a holographic skeleton. • Bullish Structure — Higher highs & higher lows align (▲ BULLISH). • Bearish Structure — Lower highs & lower lows dominate (▼ BEARISH). • Ranging — Fractal symmetry balance (◆ RANGING). Each transition is visually represented through adaptive glow intensity, producing a living contour of market evolution . --- 🔥 Volume Heat Map Projection The heatmap acts as a volumetric X-ray of the recent 100–300 bars. Each horizontal segment reflects liquidity density, rendered with gradient opacity from cold (inactive) to hot (highly active). • Detects hidden accumulation shelves and distribution ridges. • Identifies imbalanced liquidity corridors (voids). • Reveals the invisible scaffolding of the order book. When combined with smart money zones and structure lines, it creates a multi-layered holographic perspective — allowing traders to see liquidity clusters and their interaction with evolving structure in real time. --- 💎 Holographic Visual Engine Every element of HMS is dynamically color-mapped to its visual theme . Each theme carries a distinct personality: Aeon — Neon blue plasma aesthetic; futuristic and fluid. Cyber — High-contrast digital energy; circuit-like clarity. Quantum — Deep space gradients; reflective of non-linear flow. Neural — Organic transitions; biological intelligence simulation. Plasma — Vapor-bright gradients; high-energy reactive feedback. Crystal — Minimalist, transparent geometry; pristine data visibility. Optional Glow Effects and Pulse Animations create a living hologram that responds to real-time market conditions. --- 🧭 HUD Analytics Table A live data matrix placed anywhere on-screen (top, middle, or side). It summarizes five critical systems: Flow: Order flow bias — ▲ BUYING / ▼ SELLING / ◆ NEUTRAL. Struct: Microstructure direction — ▲ BULLISH / ▼ BEARISH / ◆ RANGING. Smart$: Institutional behavior — ◈ ACCUM / ◈ DISTRIB / ○ IDLE. Liquid: Market efficiency — ⚡ VOID / ● NORMAL. Diverg: Price/Volume correlation — ⚠ ALERT / ✓ CLEAR. Each metric’s color dynamically adjusts according to live readings, effectively serving as a neural HUD layer for rapid interpretation. --- 🚨 Alert Conditions Stay informed in real time with built-in alerts that trigger under specific structural or liquidity conditions. Liquidity Void Detected — Market inefficiency or thin volume region identified. Strong Order Flow Detected — Aggressive buying or selling momentum shift. Smart Money Activity — Institutional accumulation or distribution underway. Price/Volume Divergence — Volume fails to confirm price trend. Market Structure Shift — Fractal structure flips directional bias. --- ⚙️ Customization Parameters Adjustable Microstructure Depth (20–200 bars). Configurable Imbalance Ratio and Liquidity Threshold . Adaptive Smart Money Sensitivity via Accumulation Threshold (%). Multiple Fractal Depth Layers for precise structural analysis. Scalable Heatmap Resolution (5–20 levels) and opacity control. Selectable HUD Position to suit personal layout preferences. Each parameter adjusts the balance between visual clarity and data density , ensuring optimal performance across intraday and macro timeframes alike. --- 🧩 Trading Application Identify early signs of institutional activity before breakouts. Track structure transitions with fractal precision. Locate hidden liquidity voids and high-value areas. Confirm strength of trends using order-flow bias. Detect volume-based divergences that often precede reversals. HMS is designed not just for observation — but for contextual understanding . Its purpose is to help traders anchor strategies in liquidity and flow dynamics rather than surface-level price action. --- 🪞 Philosophy Markets are holographic. Each candle contains a reflection of every other candle — a fractal within a fractal, a structure within a structure. The HMS is built to reveal that reflection, allowing traders to see through the market’s multidimensional fabric. --- Developed by: AlphaNatt Version: v6 Category: Market Microstructure | Volume Intelligence Framework: PineScript v6 | Holographic Visualization System Not financial advice
Индикатор Pine Script®
от AlphaNatt
12
ATR x Trend x Volume SignalsATR x Trend x Volume Signals is a multi-factor indicator that combines volatility, trend, and volume analysis into one adaptive framework. It is designed for traders who use technical confluence and prefer clear, rule-based setups. 🎯 Purpose This tool identifies high-probability market moments when volatility structure (ATR), momentum direction (CCI-based trend logic), and volume expansion all align. It helps filter out noise and focus on clean, actionable trade conditions. ⚙️ Structure The indicator consists of three main analytical layers: 1️⃣ ATR Trailing Stop – calculates two adaptive ATR lines (fast and slow) that define volatility context, trend bias, and potential reversal points. 2️⃣ Trend Indicator (CCI + ATR) – uses a CCI-based logic combined with ATR smoothing to determine the dominant trend direction and reduce false flips. 3️⃣ Volume Analysis – evaluates volume deviations from their historical average using standard deviation. Bars are highlighted as medium, high, or extra-high volume depending on intensity. 💡 Signal Logic A Buy Signal (green) appears when all of the following are true: • The ATR (slow) line is green. • The Trend Indicator is blue. • A bullish candle closes above both the ATR (slow) and the Trend Indicator. • The candle shows medium, high, or extra-high volume. A Sell Signal (red) appears when: • The ATR (slow) line is red. • The Trend Indicator is red. • A bearish candle closes below both the ATR (slow) and the Trend Indicator. • The candle shows medium, high, or extra-high volume. Only one signal can appear per ATR trend phase. A new signal is generated only after the ATR direction changes. ❌ Exit Logic Exit markers are shown when price crosses the slow ATR line. This behavior simulates a trailing stop exit. The exit is triggered one bar after entry to prevent same-bar exits. ⏰ Session Filter Signals are generated only between the user-defined session start and end times (default: 14:00–18:00 chart time). This allows the trader to limit signal generation to active trading hours. 💬 Practical Use It is recommended to trade with a fixed risk-reward ratio such as 1 : 1.5. Stop-loss placement should be beyond the slow ATR line and adjusted gradually as the trade develops. For better confirmation, the Trend Indicator timeframe should be higher than the chart timeframe (for example: trading on 1 min → set Trend Indicator timeframe to 15 min; trading on 5 min → set to 1 hour). 🧠 Main Features • Dual ATR volatility structure (fast and slow) • CCI-based trend direction filtering • Volume deviation heatmap logic • Time-restricted signal generation • Dynamic trailing-stop exit system • Non-repainting logic • Fully optimized for Pine Script v6 📊 Usage Tip Best results are achieved when combining this indicator with additional technical context such as support-resistance, higher-timeframe confirmation, or market structure analysis. 📈 Credits Inspired by: • ATR Trailing Stop by Ceyhun • Trend Magic by Kivanc Ozbilgic • Heatmap Volume by xdecow
Индикатор Pine Script®
от shevtsov360
Matt Market EfficiencyThis is a custom Pine Script v5 indicator for TradingView that creates a Market Efficiency Heatmap as a background overlay on your chart. It visualizes how "efficient" the market's price movement is over a specified period—essentially measuring how much of the total price volatility (wiggle room) resulted in net directional progress, weighted with volume activity. High efficiency (stronger, less transparent color) indicates a clean trend with minimal wasted movement (e.g., a strong uptrend or downtrend). Low efficiency (fainter color) suggests choppy, inefficient price action (e.g., ranging or noisy market). Color coding: Teal for bullish (net price up), Purple for bearish (net price down). The heatmap intensity scales from 1% opacity (very low efficiency) to 25% opacity (high efficiency), making it subtle yet informative without overwhelming the chart.
Индикатор Pine Script®
от mattlanders
DeltaFlow Volume Profile [BigBeluga]🔵 OVERVIEW The DeltaFlow Volume Profile builds a compact volume profile next to price and enriches every bin with flow context : bullish vs. bearish participation (%), a per-bin Delta % , an optional Delta Heat Map , and a PoC band with the bin’s absolute volume. This lets you see not just where volume clustered, but who (buyers or sellers) dominated inside each price slice. 🔵 CONCEPTS Binned Volume Profile : Price range over a user-defined LookBack is split into Bins ; each bin aggregates traded volume. Bull/Bear Split : Within every bin, volume is separated by candle direction into Bull Volume and Bear Volume , then normalized to % of the bin’s displayed size. Delta % : The difference between Bull % and Bear % for the bin. Positive = buyer dominance; negative = seller dominance. Delta Heat Map : Bin background shading that scales with both total volume strength and delta bias. PoC (Point of Control) : The most significant bin gets a PoC band and a label with its absolute volume. 🔵 FEATURES Profile with Flow : A clean horizontal volume bar per bin plus stacked Bull % and Bear % . Per-Bin Delta Label : A readable “Δ xx%” tag at the start of each bin shows dominance at a glance. Delta Heat Map : Optional gradient that intensifies with higher volume and stronger delta. PoC Highlight : Optional PoC band colored separately, labeled with absolute volume (e.g., “1.23M”). Configurable Inputs : LookBack, number of Bins (10–100), toggles for Delta, Heat Map, Volume Bars, and PoC color. Readable Colors : Separate inputs for bullish (volume +) and bearish (volume –) hues. 🔵 HOW TO USE Set the window : Choose LookBack and Bins to balance detail vs. performance (more bins = finer resolution). Enable “Volume Bars” to display the bull/bear split as two stacked percent bars inside each bin. High Bull % near support → constructive demand. High Bear % near resistance → active supply. Use Δ labels (toggle “Delta”) to quickly spot bins with clear buyer/seller control; combine with price position for confluence. Turn on Delta Heat Map to prioritize areas with both large volume and strong imbalance. Watch the PoC : The PoC band marks the most traded (and often magnet) level; its label shows absolute size for context. Trade ideas : Breakout continuation when Δ stays positive across consecutive upper bins. Reversion risk when price enters a large bearish-Δ cluster below. Manage risk around the PoC; reactions there can be sharp. 🔵 CONCLUSION DeltaFlow Volume Profile upgrades a classic profile with flow intelligence. The bull/bear split, explicit Δ %, heat-weighted backdrop, and PoC volume label make dominant participation and key price shelves obvious. Use it to filter levels, time entries with imbalance, and validate breakouts or fades with objective volume-flow evidence.
Индикатор Pine Script®
от BigBeluga
18
SMT Oscillator: Smarter Money Divergence Detector [PhenLabs]📊Phenlabs - SMT Oscillator: Smarter Money Divergence Detector Version: PineScript™v6 📌Description The SMT Oscillator is a sophisticated tool designed to identify smart money divergence between two correlated assets. By analyzing the momentum and volume-weighted price action of a primary and secondary symbol, traders can spot subtle shifts in market dynamics that often precede significant price movements. This indicator is built to provide a clearer, more filtered view of inter-market relationships, solving the common problem of false signals and market noise. Its primary purpose is to equip traders with a quantifiable edge in detecting potential reversals or continuations that are not obvious on a standard price chart. 🚀Points of Innovation Dual-Symbol Divergence Core: Directly compares momentum (RSI or MACD) between two user-selected symbols to pinpoint true SMT divergence. Volume-Weighted Analysis: Integrates volume delta into the divergence calculation, giving more weight to moves backed by significant market participation. Entropy Filter for Noise Reduction: Employs an entropy calculation to filter out low-quality signals during choppy or consolidating market conditions. Predictive Forecast Line: Utilizes a linear regression model to project the oscillator’s future trajectory, offering a forward-looking glimpse of potential momentum shifts. Customizable Signal Sensitivity: Allows fine-tuning of overbought and oversold levels to adapt to different market volatilities and trading styles. Integrated Signal Alerts: Provides built-in alerts for bullish/bearish zero crosses and overbought/oversold conditions. 🔧Core Components Momentum Engine: The user can select either RSI or MACD as the underlying engine for the divergence calculation, allowing for flexibility in analysis. Normalization Function: Price data from both symbols is normalized using percentage change to ensure a true “apples-to-apples” comparison, regardless of their nominal price differences. Divergence Calculator: The core algorithm that subtracts the secondary symbol’s momentum from the primary’s and normalizes the result using the combined standard deviation. Smoothing Mechanism: An Exponential Moving Average (EMA) is applied to the raw oscillator output to reduce choppiness and provide a clearer signal line. 🔥Key Features Multi-Asset Comparison: Go beyond single-asset analysis by comparing correlated pairs like ES/NQ or BTC/ETH to uncover hidden trading opportunities. Heatmap Visualization: An optional heatmap mode provides an intuitive visual representation of divergence strength, making it easier to gauge market sentiment at a glance. Configurable Lookback and Timeframe: Adjust the lookback period and analysis timeframe to suit your specific strategy, from short-term scalping to long-term trend analysis. Signal Markers: Visual markers are plotted directly on the chart for bullish and bearish zero-line crossovers, providing clear entry and exit signals. 🎨Visualization SMT Oscillator Line: The primary visual element, colored blue for bullish (positive) divergence and orange for bearish (negative) divergence. Zero Line: A solid horizontal line at the zero level, indicating the equilibrium point between the two assets. Crossovers of this line signal a shift in relative strength. Overbought/Oversold Zones: Dotted lines at the +80 and -80 levels (customizable) that highlight extreme divergence readings, often indicating potential exhaustion points. Forecast Line: A predictive line that plots the anticipated path of the oscillator, giving traders an advanced warning of potential changes in momentum. 📖Usage Guidelines Setting Categories Primary Symbol Default: (Chart Symbol) Description: The main asset you are analyzing. Leave blank to use the symbol currently on your chart. Secondary Symbol Default: CME_MINI:ES1! (used with NASDAQ futures due to inherent heavy correlation Description: The asset to compare against the primary symbol. Lookback Period Default: 14 Range: 8-100 Description: Controls the calculation window for momentum (RSI/MACD). Higher values result in a smoother, less sensitive oscillator. Divergence Type Default: RSI Options: RSI, MACD Description: Choose the momentum indicator to use for the divergence calculation. Enable Volume Weighting Default: true Description: When enabled, gives more weight to divergence signals that are accompanied by significant volume. ✅Best Use Cases Identifying high-probability reversal points by spotting divergence in overbought or oversold territory. Confirming the strength of a trend by observing sustained positive or negative divergence. Pairs trading by taking a long position on the outperforming asset and a short position on the underperforming one during a divergence. Risk management by recognizing when a current trend is losing its underlying momentum. ⚠️Limitations Requires Correlated Assets: The indicator’s effectiveness is highly dependent on the selection of two assets with a known correlation (e.g., ES and NQ). Not a Standalone System: Divergence signals should be used in conjunction with other forms of analysis (price action, market structure) and not as a complete trading system. Lagging by Nature: As it is based on moving averages and past price data, the oscillator is inherently lagging and may not capture all rapid price changes. 💡What Makes This Unique Combined Momentum & Volume: Unlike standard oscillators, it fuses momentum with volume delta for a more robust “Smart Money” perspective. Noise-Filtering Mechanism: The proprietary entropy filter is a unique feature designed to weed out insignificant market chatter and focus on high-conviction signals. 🔬How It Works Data Normalization: The script first normalizes the price data of the two selected symbols into percentage changes. This ensures that the comparison is fair, regardless of the difference in their price scales. Momentum Calculation: It then calculates the chosen momentum value (either RSI or MACD histogram) for each of the normalized price series. Divergence Computation: The core of the indicator lies in subtracting the momentum of the secondary symbol from the primary one. This raw divergence is then optionally weighted by volume and filtered for market noise (entropy) to produce the final oscillator value. 💡Note: For best results, use this indicator on adequate timeframes to filter out market noise. Always confirm signals with price action analysis before entering a trade.
Индикатор Pine Script®
от PhenLabs
Momentum ScopeOverview Momentum Scope is a Pine Script™ v6 study that renders a –1 to +1 momentum heatmap across up to 32 lookback periods in its own pane. Using an Augmented Relative Momentum Index (ARMI) and color shading, it highlights where momentum strengthens, weakens, or stays flat over time—across any asset and timeframe. Key Features Full-Spectrum Momentum Map : Computes ARMI for 1–32 lookbacks, indexed from –1 (strong bearish) to +1 (strong bullish). Flexible Scale Gradation : Choose Linear or Exponential spacing, with adjustable expansion ratio and maximum depth. Trending Bias Control : Apply a contrast-style curve transform to emphasize trending vs. mean-reverting behavior. Duotone & Tritone Palettes : Select between two vivid color styles, with user-definable hues for bearish, bullish, and neutral momentum. Compact, Overlay-Free Display : Renders solely in its own pane—keeping your price chart clean. Inputs & Customization Scale Gradation : Linear or Exponential spacing of intervals Scale Expansion : Ratio governing step-size between successive lookbacks Scale Maximum : Maximum lookback period (and highest interval) Trending Bias : Curve-transform bias to tilt the –1 … +1 grid Color Style : Duotone or Tritone rendering modes Reducing / Increasing / Neutral Colors : Pick your own hues for bearish, bullish, and flat zones How to Use Add to Chart : Apply “Momentum Scope” as a separate indicator. Adjust Scale : For exponential spacing, switch your indicator Y-axis to Logarithmic . Set Bias & Colors : Tweak Trending Bias and choose a palette that stands out on your layout. Interpret the Heatmap : Red tones = weakening/bearish momentum Green tones = strengthening/bullish momentum Neutral hues = indecision or flat momentum Copyright © 2025 MVPMC. Licensed under MIT. For full license see opensource.org
Индикатор Pine Script®
от MVPMC
Volume Intelligence Suite (VIS) v2📊 Volume Intelligence Suite – Smart Volume, Smart Trading The Volume Intelligence Suite is a powerful, all-in-one TradingView indicator designed to give traders deeper insight into market activity by visualizing volume behavior with price action context. Whether you're a scalper, day trader, or swing trader, this tool helps uncover hidden momentum, institutional activity, and potential reversals with precision. 🔍 Key Features: Dynamic Volume Zones – Highlights high and low volume areas to spot accumulation/distribution ranges. Volume Spikes Detector – Automatically marks abnormal volume bars signaling potential breakout or trap setups. Smart Delta Highlighting – Compares bullish vs bearish volume in real time to reveal buyer/seller strength shifts. Session-Based Volume Profiling – Breaks volume into key trading sessions (e.g., London, New York) for clearer context. Volume Heatmap Overlay – Optional heatmap to show intensity and velocity of volume flow per candle. Custom Alerts – Built-in alerts for volume surges, divergences, and exhaustion signals. Optimized for Kill Zone Analysis – Pairs perfectly with ICT-style session strategies and Waqar Asim’s trading methods. 🧠 Why Use Volume Intelligence? Most traders overlook the story behind each candle. Volume Intelligence Suite helps you "see the why behind the move" — exposing key areas of interest where smart money may be active. Instead of reacting late, this tool puts you in position to anticipate. Use it to: Validate breakouts Detect fakeouts and liquidity grabs Confirm bias during kill zones Analyze volume divergence with price swings ⚙️ Fully Customizable: From volume thresholds to visual styles and session timings, everything is user-adjustable to fit your market, timeframe, and strategy. ✅ Best For: ICT/Smart Money Concepts (SMC) traders Breakout & reversal traders Kill zone session scalpers Institutional footprint followers
Индикатор Pine Script®
от Rishabh_btc
Bitcoin Cycle [BigBeluga]Bitcoin Cycle Indicator is designed exclusively for analyzing Bitcoin’s long-term market cycles, working only on the 1D BTC chart . This indicator provides an in-depth view of potential cycle tops and bottoms, assisting traders in identifying key phases in Bitcoin’s market evolution. 🔵 Key Features: Heatmap Cycle Phases: The indicator colors each cycle from blue to red , reflecting Bitcoin’s market cycle progression. Cooler colors (blue/green) signal potential accumulation or early growth phases, while warmer colors (yellow/red) indicate maturation and potential top regions. All-Time High (ATH) and Future ATH Projection: Tracks the current ATH in real-time, while applying a linear regression model to project a possible new ATH in the future. This projection aims to provide insights into the next major cycle peak for long-term strategy. Dashboard Overview: Displays the current ATH, potential new ATH, and the percentage distance between them. This helps users assess how far the current price is from the projected target. Top & Bottom Cycle Signals: Red down arrows mark significant price peaks, potentially indicating cycle tops. Up arrows, numbered sequentially (inside each cycle), denote possible bottom signals for strategic DCA (Dollar Cost Averaging) entries. 1D BTC Chart Only: Built solely for the 1D BTC timeframe. Switching to any other timeframe or asset will trigger a warning message: " BTC 1D Only ." This ensures accuracy in analyzing Bitcoin’s unique cyclical behavior. 🔵 When to Use: Ideal for long-term Bitcoin investors and cycle analysts, the Bitcoin Cycle Indicator empowers users to: Identify key accumulation and distribution phases. Track Bitcoin’s cyclical highs and lows with visual heatmap cues. Estimate future potential highs based on historical patterns. Strategize long-term positions by monitoring cycle tops and possible accumulation zones. By visualizing Bitcoin’s cycles with color-coded clarity and top/bottom markers, this indicator is an essential tool for any BTC analyst aiming to navigate market cycles effectively.
Индикатор Pine Script®
от BigBeluga
IQ Zones [TradingIQ]Hey Traders! Introducing "IQ Zones". "IQ Zones" is an indicator that combines support and resistance identification with volume, the "value area" of a candlestick to be exact. IQ Zones identifies turning points in the market; however, the candlestick high or low that formed the key turning point is not necessarily distinguished as the support/resistance area. Instead, the script looks into the bar at lower timeframes and calculates the value area of the candlestick that formed the support or resistance level. Therefore, any lines protruding from a candlestick reflect the value area of that candlestick. These levels (value area high and value area low) are marked on the candlestick as a support/resistance level. If the level formed on high volume it's marked as an "IQ Zone". Additionally, IQ Zones presents a heat map to show volume intensity at nearby price areas. The heatmap is a product of the Volume Profile (IQ Profile) located on the right of the chart. The IQ Profile is a segmented volume profile. Recent price is split into fifths (customizable), and individual volume profiles are calculated for all segmented price areas. Price is split into more than one segment to avoid a situation where volume in a ranging price zone far surpasses all other recent price areas - creating an "unusable" volume profile that doesn't offer helpful insights. If desired, you can set the segmenting option to "1" to calculate one unified volume profile for the entire price range. The image above shows IQ Zones in action! Core Features of IQ Zones Value Area Support and Resistance Levels Segmented volume profile for the recent trading period Volume intensity heatmap Support and resistance levels in high volume intensity may be more significant as price stoppers The image above explains the labels marked along the y-axis of the IQ Profile. The "more green" a price area/label is, the higher the volume intensity at the marked support/resistance area. The image above further explains line lines protruding from the IQ Profile. For this example, the value area of the candlestick (where most trading action occurred) is quite far from the high price of the candlestick that formed a resistance level! Using the value area of a candlestick that marks a key turning point to draw support/resistance offers insight into where the majority of trading action took place when the support/resistance level was forming! Additionally, you can hover your mouse over the IQ Zone labels (triangles pointing up or down) to see the prices of the value area for the support/resistance level, including the total buying volume and total selling volume at the price area! The image above further explains the IQ Profile! You can segment the recent price area anywhere from 1 - 15 times. The image above further explains IQ Zones and the IQ Profile! That will be all for this indicator - a fun project to share with the community. Thank you!
Индикатор Pine Script®
от Trading-IQ
5
Linear Regression ChannelLinear Regression Channel Indicator Overview: The Linear Regression Channel Indicator is a versatile tool designed for TradingView to help traders visualize price trends and potential reversal points. By calculating and plotting linear regression channels, bands, and future projections, this indicator provides comprehensive insights into market dynamics. It can highlight overbought and oversold conditions, identify trend direction, and offer visual cues for future price movements. Key Features: Linear Regression Bands: Input: Plot Linear Regression Bands Description: Draws bands based on linear regression calculations, representing overbought and oversold levels. Customizable Parameters: Length: Defines the look-back period for the regression calculation. Deviation: Determines the width of the bands based on standard deviations. Linear Regression Channel: Input: Plot Linear Regression Channel Description: Plots a channel using linear regression to visualize the main trend. Customizable Parameters: Channel Length: Defines the look-back period for the channel calculation. Deviation: Determines the channel's width. Future Projection Channel: Input: Plot Future Projection of Linear Regression Description: Projects a linear regression channel into the future, aiding in forecasting potential price movements. Customizable Parameters: Length: Defines the look-back period for the projection calculation. Deviation: Determines the width of the projected channel. Arrow Direction Indicator: Input: Plot Arrow Direction Description: Displays directional arrows based on future projection, indicating expected price movement direction. Color-Coded Price Bars: Description: Colors the price bars based on their position within the regression bands or channel, providing a heatmap-like visualization. Dynamic Visualization: Colors: Uses a gradient color scheme to highlight different conditions, such as uptrend, downtrend, and mid-levels. Labels and Markers: Plots visual markers for significant price levels and conditions, enhancing interpretability. Usage Notes Setting the Length: Adjust the look-back period (Length) to suit the timeframe you are analyzing. Shorter lengths are responsive to recent price changes, while longer lengths provide a broader view of the trend. Interpreting Bands and Channels: The bands and channels help identify overbought and oversold conditions. Price moving above the upper band or channel suggests overbought conditions, while moving below the lower band or channel indicates oversold conditions. Using the Future Projection: Enable the future projection channel to anticipate potential price movements. This can be particularly useful for setting target prices or stop-loss levels based on expected trends. Arrow Direction Indicator: Use the arrow direction indicator to quickly grasp the expected price movement direction. An upward arrow indicates a potential uptrend, while a downward arrow suggests a potential downtrend. Color-Coded Price Bars: The color of the price bars changes based on their relative position within the regression bands or channel. This heatmap visualization helps quickly identify bullish, bearish, and neutral conditions. Dynamic Adjustments: The indicator dynamically adjusts its visual elements based on user settings and market conditions, ensuring that the most relevant information is always displayed. Visual Alerts: Pay attention to the labels and markers on the chart indicating significant events, such as crossovers and breakouts. These visual alerts help in making informed trading decisions. The Linear Regression Channel Indicator is a powerful tool for traders looking to enhance their technical analysis. By offering multiple regression-based visualizations and customizable parameters, it helps identify key market conditions, trends, and potential reversal points. Whether you are a day trader or a long-term investor, this indicator can provide valuable insights to improve your trading strategy.
Индикатор Pine Script®
от ChartPrime
31
TechniTrend: Dynamic Pair CorrelationTechniTrend: Dynamic Pair Correlation Description: The TechniTrend: Dynamic Pair Correlation is a powerful and versatile indicator designed to track the correlation between two assets—whether cryptocurrencies, indices, or other financial instruments—across multiple timeframes. Understanding correlations can provide deep insights into market behavior, helping traders make informed decisions based on how two assets move in relation to each other. Key Features: Customizable Pair Selection: Compare any two assets (e.g., Bitcoin and DXY, Ethereum and SP500) to study how their price movements relate over time. Multi-Timeframe Analysis: Simultaneously track correlations across different timeframes—standard, lower, and higher—providing a comprehensive view of market dynamics. Dynamic Color Coding for Correlation Strength: Instantly spot correlations with visually intuitive colors—green for strong positive correlation, red for strong negative correlation, and yellow for neutral. Heatmap Background: An easy-to-read background color heatmap highlights when correlations hit extreme levels, adding another layer of insight to your charts. Real-Time Alerts: Get notified when correlations exceed your custom thresholds, signaling opportunities for potential breakouts, reversals, or divergences. Divergence Detection: Automatically highlight moments when asset prices diverge, offering potential entry/exit points for smart trading decisions. How to Use: Asset Pair Comparison: Select two symbols to analyze their price correlation, such as BTC/USDT and DXY, or any other pair that fits your strategy. Set Your Timeframes: Customize your standard, lower, and higher timeframes to monitor correlations at different intervals, allowing you to capture both short-term and long-term relationships. Track Correlation Strength: Use dynamic color coding to quickly see how closely two assets are moving together. Strong correlations (positive or negative) could signal potential opportunities, while low correlations may indicate the absence of a strong trend. Utilize Alerts: Receive real-time alerts when correlations cross your predefined thresholds, helping you take action when the market presents strong alignment or divergence. Divergence Signals: Watch for divergence between the assets on multiple timeframes, which could indicate a potential trend reversal or a shift in market behavior. Why It’s Essential: Understanding the relationship between two assets can be a game changer for traders. Whether you're comparing Bitcoin to DXY, tracking the correlation between Ethereum and major indices, or evaluating two cryptocurrencies, this indicator gives you the tools to visualize and respond to market conditions with precision. Perfect For: Crypto traders looking to optimize strategies by monitoring the relationship between major cryptocurrencies and other assets. Arbitrageurs seeking to capitalize on temporary pricing anomalies between correlated pairs. Trend-followers aiming to catch large movements by detecting alignment or divergence between asset classes. Portfolio managers monitoring how different asset classes impact each other to hedge or diversify investments. By leveraging the TechniTrend: Dynamic Pair Correlation indicator, traders can gain deeper insights into market trends, correlations, and divergences, giving them an edge in fast-moving markets.
Индикатор Pine Script®
от itsKraken
j trader ModelAn indicator designed to trade indices using the jtrader model and ICT concepts. jtrader Model: Below are the key points to trade this model: Power of 3 is the key element of this model. Accumulation during pre NY open.NY Open represents 9:30am opening of NY Stock Exchange. Manipulation(JUDA) immediately after NY open. Juda is a manipulated move by the indices after the session open. Distribution as a reversal with BOS ,Heatmap preferably during Macros. Distribution is market phase where it moves towards its original expansion during macros. Macros are 20 minute time windows where indices give moves with strong force. Heatmap represent kis point of interests for the trade. Indicator Features: Creates a complete window of trading with key elements needed to trade The jtrader Model. Identify and marks key points of interests (POIs). Identify and highlights key swing points of Sessions, Days, Weeks, True open etc. Highlights the NY Open. Highlights the Macros. Indicator Settings: Enable/Disable any POI marking. Adjust session time ranges. Adjust enabling of model poi marking time window. Choose color of choice for highlighting the POI. Enable/Disable Macros. This indicator will gradually updated with new features to trade the jtrader model. Your feedback will help us improve and enhance this indicator.
Индикатор Pine Script®
от nauman_shahid
2
Liquidation Ranges + Volume/OI Dots [Kioseff Trading]Hello! Introducing a multi-faceted indicator "Liquidation Ranges + Volume Dots" - this indicator replicates the volume dot tools found on various charting platforms and populates a liquidation range on crypto assets! Features Volume/OI dots populated according to user settings Size of volume/OI dots corresponds to degree of abnormality Naked level volume dots Fixed range capabilities for volume/OI dots Visible time range capabilities for volume/OI dots Lower timeframe data used to discover iceberg orders (estimated using 1-minute data) S/R lines drawn at high volume/OI areas Liquidation ranges for crypto assets (10x - 100x) Liquidation ranges are calculated using a popular crypto exchange's method # of violations of liquidation ranges are recorded and presented in table Pertinent high volume/OI price areas are recorded and presented in table Personalized coloring for volume/OI dots Net shorts / net long for the price range recorded Lines shows reflecting net short & net long increases/decreases Configurable volume/OI heatmap (displayed between liquidation ranges) And some more (: Liquidation Range The liquidation range component of the indicator uses a popular crypto exchange's calculation (for liquidation ranges) to populate the chart for where 10x - 100x leverage orders are stopped out. The image above depicts features corresponding to net shorts and net longs. The image above shows features corresponding to liquidation zones for the underlying coin. The image above shows the option to display volume/oi delta at the time the corresponding grid was traded at. The image above shows an instance of using the "fixed range" feature for the script. *The average price of the range is calculated to project liquidation zones. *Heatmap is calculated using OI (or volume) delta. Huge thank you to Pine Wizard @DonovanWall for his range filter code! Price ranges are automatically detected using his calculation (: Volume / OI Dots Similar to other charting platforms, the volume/OI dots component of the indicator distinguishes "abnormal" changes in volume/OI; the detected price area is subsequently identified on the chart. The detection method uses percent rank and calculates on the last bar of the chart. The "agelessness" of detection is contingent on user settings. The image above shows volume dots in action; the size of each volume dot corresponds to the amount of volume at the price area. Smaller dots = lower volume Larger dots = higher volume The image above exemplifies the highest aggression setting for volume/OI dot detection. The table oriented top-right shows the highest volume areas (discovered on the 1-minute chart) for the calculated period. The open interest change and corresponding price level are also shown. Results are listed in descending order but can also be listed in order of occurrence (most relevant). Additionally, you can use the visible time range feature to detect volume dots. The feature shows and explains how the visible range feature works. You select how many levels you want to detect and the script will detect the selected number of levels. For instance, if I select to show 20 levels, the script will find the 20 highest volume/OI change price areas and distinguish them. The image above shows a narrower price range. The image above shows the same price range; however, the script is detecting the highest OI change price areas instead of volume. * You can also set a fixed range with this feature * Naked levels can be used Additionally, you can select for the script to show only the highest volume/ OI change price area for each bar. When active, the script will successively identify the highest volume / OI change price area for the most recent bars. Naked Levels The image above shows and explains how naked levels can be detected when using the script. And that's pretty much it! Of course, there're a few more features you can check out when you use the script that haven't been explained here (: Thank you again to @DonovanWall Thank you to @Trendoscope for his binary insertion sort library (: Thank you to @PineCoders for their time library Thank you for checking this out!
Индикатор Pine Script®
от KioseffTrading
61
Trap Longs - Hamza NaveedTrap Longs – Hamza Naveed is an advanced Open Interest–based indicator that analyzes net longs, net shorts, delta, and ratio across multiple exchanges (Binance, BitMEX, Kraken). It visualizes institutional positioning using candles, lines, or columns, with optional VWMA/EMA smoothing, RSI strength, volume heatmaps, statistical tables, and divergence detection. Designed to identify traps, absorption, and exhaustion, this tool helps traders understand positioning shifts, liquidity behavior, and potential trend reversals beyond price action alone.
Индикатор Pine Script®
от Hamza_Alee
1
Liquidation Map [Alpha Extract]A sophisticated liquidity distribution visualization system that identifies potential liquidation zones through pivot-based detection and renders them as an interactive histogram with cumulative distance-to-liquidation curves. Utilizing multi-exchange volume aggregation and ATR-scaled pocket detection, this indicator delivers institutional-grade liquidity mapping with real-time histogram display showing relative concentration of long and short liquidation levels across configurable price ranges. The system's box-based rendering architecture combined with cumulative distribution overlays provides comprehensive visual assessment of asymmetric liquidity positioning for strategic trade planning. 🔶 Advanced Multi-Exchange Aggregation Framework Implements intelligent ticker detection and multi-source volume aggregation across major exchanges including Binance, Bybit, KuCoin, OKX, and MEXC for accurate liquidity weight calculations. The system automatically identifies base currency (BTC, ETH, SOL) from chart ticker, retrieves volume data from matching perpetual contracts across multiple venues, and aggregates into composite volume metric for enhanced pocket weighting accuracy. 🔶 Pivot-Based Liquidation Pocket Detection Features sophisticated swing point identification using configurable pivot width with ATR-scaled vertical zone construction for volatility-adaptive pocket sizing. The system detects pivot highs for short liquidation zones (placed above swing) and pivot lows for long liquidation zones (placed below swing), applying 200-period ATR with percentage multipliers to determine pocket heights that adjust to market volatility conditions. 🔶 Interactive Histogram Visualization Engine Provides real-time box-based histogram rendering in indicator pane with configurable bin counts (up to 400 columns) and adjustable height, displaying liquidity concentration across fixed percentage range above and below current price. The system calculates bin sizes from view range, accumulates pocket weights into price bins, and renders vertical bars with gradient color intensity reflecting relative liquidity concentration at each price level. 🔶 Cumulative Distance Overlay System Implements innovative cumulative distribution curves showing aggregate liquidity distance from current price for both long (left) and short (right) positions. The system calculates running totals of pocket weights from current price outward in both directions, normalizes against maximum span, and overlays line segments showing how much total liquidity exists at various distances, enabling instant assessment of liquidation cascade potential. 🔶 Dynamic Price Range Adaptation Features fixed percentage-based view window that maintains consistent price range visualization across all timeframes and instruments, automatically centering histogram on current price with configurable +/- percentage bounds. The system recalculates histogram bins and pocket distributions on each bar close, ensuring visualization adapts to price movement while maintaining interpretable scale regardless of volatility regime. 🔶 Touch Detection and Weight Adjustment Provides intelligent pocket state tracking that identifies when price trades through liquidation zones and applies configurable weight multipliers to touched pockets for historical context. The system monitors price interaction with pocket midpoints, marks pockets as "hit" when violated, and optionally increases their visual weight (default 5x) to emphasize historical liquidation levels while distinguishing from untouched future zones. 🔶 Gradient Intensity Color System Implements sophisticated color gradient engine that modulates bar opacity from transparent to opaque based on relative liquidity concentration within each bin. The system normalizes bin values against maximum liquidity, applies color interpolation from faded to vivid hues, and distinguishes long liquidation zones (cyan) from short liquidation zones (yellow/gold) with current price column highlighted in red for instant orientation. 🔶 Performance-Optimized Rendering Architecture Utilizes efficient box and line object management with dynamic allocation based on histogram configuration, implementing intelligent cleanup and reuse to maintain smooth performance. The system includes adaptive line budget calculations that adjust segment density for cumulative curves based on available object limits, ensuring consistent operation even with maximum histogram resolution settings. 🔶 Asymmetric Distribution Analysis Calculates separate cumulative distributions for long and short liquidation zones split at current price, enabling identification of imbalanced liquidity positioning. The system normalizes distributions against respective maximums and overlays both curves on single histogram, allowing traders to instantly assess whether more liquidation risk exists above (shorts vulnerable) or below (longs vulnerable) current price levels. 🔶 Configurable Label and Scale System Provides price axis labeling with adjustable frequency to reduce clutter while maintaining reference points, displaying price values at regular column intervals with configurable offset positioning. The system includes current price label showing exact value and percentile position within view range, offering both absolute price reference and relative positioning context for distribution interpretation. 🔶 Historical Pocket Persistence Framework Maintains rolling window of liquidation pockets up to 3000 bars with automatic expiration management and optional preservation of touched zones for historical analysis. The system tracks pocket creation time, monitors age against lookback limits, and manages array cleanup to prevent memory overflow while retaining relevant historical liquidation levels for pattern recognition and support/resistance validation. This indicator delivers sophisticated liquidity distribution analysis through histogram visualization and cumulative distance curves that reveal asymmetric positioning of potential liquidation levels. Unlike simple liquidation heatmaps that show absolute levels, the Liquidation Map's cumulative distribution overlays instantly communicate how much total liquidity exists at various distances from current price, enabling assessment of cascade potential. The system's multi-exchange volume aggregation, touch-weighted historical zones, and fixed-range visualization make it essential for traders seeking strategic positioning around institutional liquidity clusters in cryptocurrency futures markets. The histogram format enables instant identification of price levels where concentrated liquidations may trigger significant volatility or reversal events, while the asymmetric distribution curves reveal whether market structure favors upside or downside cascades.
Индикатор Pine Script®
от AlphaExtract
2
Hour/Day/Month Optimizer [CHE] Hour/Day/Month Optimizer — Bucketed seasonality ranking for hours, weekdays, and months with additive or compounded returns, win rate, simple Sharpe proxy, and trade counts Summary This indicator profiles time-of-day, day-of-week, and month-of-year behavior by assigning every bar to a bucket and accumulating its return into that bucket. It reports per-bucket score (additive or compounded), win rate, a dispersion-aware return proxy, and trade counts, then ranks buckets and highlights the current one if it is best or worst. A compact on-chart table shows the top buckets or the full ranking; a last-bar label summarizes best and worst. Optional hour filtering and UTC shifting let you align buckets with your trading session rather than exchange time. Motivation: Why this design? Traders often see repetitive timing effects but struggle to separate genuine seasonality from noise. Static averages are easily distorted by sample size, compounding, or volatility spikes. The core idea here is simple, explicit bucket aggregation with user-controlled accumulation (sum or compound) and transparent quality metrics (win rate, a dispersion-aware proxy, and counts). The result is a practical, legible seasonality surface that can be used for scheduling and filtering rather than prediction. What’s different vs. standard approaches? Reference baseline: Simple heatmaps or average-return tables that ignore compounding, dispersion, or sample size. Architecture differences: Dual aggregation modes: additive sum of bar returns or compounded factor. Per-bucket win rate and trade count to expose sample support. A simple dispersion-aware return proxy to penalize unstable averages. UTC offset and optional custom hour window. Deterministic, closed-bar rendering via a lightweight on-chart table. Practical effect: You see not only which buckets look strong but also whether the observation is supported by enough bars and whether stability is acceptable. The background tint and last-bar label give immediate context for the current bucket. How it works (technical) Each bar is assigned to a bucket based on the selected dimension (hour one to twenty-four, weekday one to seven, or month one to twelve) after applying the UTC shift. An optional hour filter can exclude bars outside a chosen window. For each bucket the script accumulates either the sum of simple returns or the compounded product of bar factors. It also counts bars and wins, where a win is any bar with a non-negative return. From these, it derives: Score: additive total or compounded total minus the neutral baseline. Win rate: wins as a percentage of bars in the bucket. Dispersion-aware proxy (“Sharpe” column): a crude ratio that rises when average return improves and falls when variability increases. Buckets are sorted by a user-selected key (score, win rate, dispersion proxy, or trade count). The current bar’s bucket is tinted if it matches the global best or worst. At the last bar, a table is drawn with headers, an optional info row, and either the top three or all rows, using zebra backgrounds and color-coding (lime for best, red for worst). Rendering is last-bar only; no higher-timeframe data is requested, and no future data is referenced. Parameter Guide UTC Offset (hours) — Shifts bucket assignment relative to exchange time. Default: zero. Tip: Align to your local or desk session. Use Custom Hours — Enables a local session window. Default: off. Trade-off: Reduces noise outside your active hours but lowers sample size. Start / End — Inclusive hour window one to twenty-four. Defaults: eight to seventeen. Tip: Widen if rankings look unstable. Aggregation — “Additive” sums bar returns; “Multiplicative” compounds them. Default: Additive. Tip: Use compounded for long-horizon bias checks. Dimension — Bucket by Hour, Day, or Month. Default: Hour. Tip: Start Hour for intraday planning; switch to Day or Month for scheduling. Show — “Top Three” or “All”. Default: Top Three. Trade-off: Clarity vs. completeness. Sort By — Score, Win Rate, Sharpe, or Trades. Default: Score. Tip: Use Trades to surface stable buckets; use Win Rate for skew awareness. X / Y — Table anchor. Defaults: right / top. Tip: Move away from price clusters. Text — Table text size. Default: normal. Light Mode — Light palette for bright charts. Default: off. Show Parameters Row — Info header with dimension and span. Default: on. Highlight Current Bucket if Best/Worst — Background tint when current bucket matches extremes. Default: on. Best/Worst Barcolor — Tint colors. Defaults: lime / red. Mark Best/Worst on Last Bar — Summary label on the last bar. Default: on. Reading & Interpretation Score column: Higher suggests stronger cumulative behavior for the chosen aggregation. Compounded mode emphasizes persistence; additive mode treats all bars equally. Win Rate: Stability signal; very high with very low trades is unreliable. “Sharpe” column: A quick stability proxy; use it to down-rank buckets that look good on score but fluctuate heavily. Trades: Sample size. Prefer buckets with adequate counts for your timeframe and asset. Tinting: If the current bucket is globally best, expect a lime background; if worst, red. This is context, not a trade signal. Practical Workflows & Combinations Trend following: Use Hour or Day to avoid initiating trades during historically weak buckets; require structure confirmation such as higher highs and higher lows, plus a momentum or volatility filter. Mean reversion: Prefer buckets with moderate scores but acceptable win rate and dispersion proxy; combine with deviation bands or volume normalization. Exits/Stops: Tighten exits during historically weak buckets; relax slightly during strong ones, but keep absolute risk controls independent of the table. Multi-asset/Multi-TF: Start with Hour on liquid intraday assets; for swing, use Day. On monthly seasonality, require larger lookbacks to avoid overfitting. Behavior, Constraints & Performance Repaint/confirmation: Calculations use completed bars only; table and label are drawn on the last bar and can update intrabar until close. security()/HTF: None used; repaint risk limited to normal live-bar updates. Resources: Arrays per dimension, light loops for metric building and sorting, `max_bars_back` two thousand, and capped label/table counts. Known limits: Sensitive to sample size and regime shifts; ignores costs and slippage; bar-based wins can mislead on assets with frequent gaps; compounded mode can over-weight streaks. Sensible Defaults & Quick Tuning Start: Hour dimension, Additive, Top Three, Sort by Score, default session window off. Too many flips: Switch to Sort by Trades or raise sample by widening hours or timeframe. Too sluggish/over-smoothed: Switch to Additive (if on compounded) or shorten your chart timeframe while keeping the same dimension. Overfit risk: Prefer “All” view to verify that top buckets are not isolated with tiny counts; use Day or Month only with long histories. What this indicator is—and isn’t This is a seasonality and scheduling layer that ranks time buckets using transparent arithmetic and simple stability checks. It is not a predictive model, not a complete trading system, and it does not manage risk. Use it to plan when to engage, then rely on structure, confirmation, and independent risk management for entries and exits. Disclaimer The content provided, including all code and materials, is strictly for educational and informational purposes only. It is not intended as, and should not be interpreted as, financial advice, a recommendation to buy or sell any financial instrument, or an offer of any financial product or service. All strategies, tools, and examples discussed are provided for illustrative purposes to demonstrate coding techniques and the functionality of Pine Script within a trading context. Any results from strategies or tools provided are hypothetical, and past performance is not indicative of future results. Trading and investing involve high risk, including the potential loss of principal, and may not be suitable for all individuals. Before making any trading decisions, please consult with a qualified financial professional to understand the risks involved. By using this script, you acknowledge and agree that any trading decisions are made solely at your discretion and risk. Do not use this indicator on Heikin-Ashi, Renko, Kagi, Point-and-Figure, or Range charts, as these chart types can produce unrealistic results for signal markers and alerts. Best regards and happy trading Chervolino
Индикатор Pine Script®
от chervolino
RT + TL v12This is a script to populate gamma/vanna/charm levels from option greeks heatmaps in Vexly. Heavy levels indicate levels with highest confluence. TLU and TLL are upper and lower levels. The levels are posted everyday on their discord server. Range Trader another tool in Vexly, the levels from which can be plotted as well. Just copy the headline from range trader into "RT Range" and the modes into "RT mode" Example: RT Mode will take this string as input and plot the levels: upper_mode 6049.037 mp_mode 6035.407 lower_mode 6021.776 RT Range will take this string as input and plot the levels: 6044.893 - 6017.652 Hope this helps
Индикатор Pine Script®
от sreenicam
1
Polynomial Regression Keltner Channel [ChartPrime]Polynomial Regression Keltner Channel ⯁ OVERVIEW The Polynomial Regression Keltner Channel [ ChartPrime ] indicator is an advanced technical analysis tool that combines polynomial regression with dynamic Keltner Channels. This indicator provides traders with a sophisticated method for trend analysis, volatility assessment, and identifying potential overbought and oversold conditions. ◆ KEY FEATURES Polynomial Regression: Uses polynomial regression for trend analysis and channel basis calculation. Dynamic Keltner Channels: Implements Keltner Channels with adaptive volatility-based bands. Overbought/Oversold Detection: Provides visual cues for potential overbought and oversold market conditions. Trend Identification: Offers clear trend direction signals and change indicators. Multiple Band Levels: Displays four levels of upper and lower bands for detailed market structure analysis. Customizable Visualization: Allows toggling of additional indicator lines and signals for enhanced chart analysis. ◆ FUNCTIONALITY DETAILS ⬥ Polynomial Regression Calculation: Implements a custom polynomial regression function for trend analysis. Serves as the basis for the Keltner Channel, providing a smoothed centerline. //@function Calculates polynomial regression //@param src (series float) Source price series //@param length (int) Lookback period //@returns (float) Polynomial regression value for the current bar polynomial_regression(src, length) => sumX = 0.0 sumY = 0.0 sumXY = 0.0 sumX2 = 0.0 sumX3 = 0.0 sumX4 = 0.0 sumX2Y = 0.0 n = float(length) for i = 0 to n - 1 x = float(i) y = src sumX += x sumY += y sumXY += x * y sumX2 += x * x sumX3 += x * x * x sumX4 += x * x * x * x sumX2Y += x * x * y slope = (n * sumXY - sumX * sumY) / (n * sumX2 - sumX * sumX) intercept = (sumY - slope * sumX) / n n - 1 * slope + intercept ⬥ Dynamic Keltner Channel Bands: Calculates ATR-based volatility for dynamic band width adjustment. Uses a base multiplier and adaptive volatility factor for flexible band calculation. Generates four levels of upper and lower bands for detailed market structure analysis. atr = ta.atr(length) atr_sma = ta.sma(atr, 10) // Calculate Keltner Channel Bands dynamicMultiplier = (1 + (atr / atr_sma)) * baseATRMultiplier volatility_basis = (1 + (atr / atr_sma)) * dynamicMultiplier * atr ⬥ Overbought/Oversold Indicator line and Trend Line: Calculates an OB/OS value based on the price position relative to the innermost bands. Provides visual representation through color gradients and optional signal markers. Determines trend direction based on the polynomial regression line movement. Generates signals for trend changes, overbought/oversold conditions, and band crossovers. ◆ USAGE Trend Analysis: Use the color and direction of the basis line to identify overall trend direction. Volatility Assessment: The width and expansion/contraction of the bands indicate market volatility. Support/Resistance Levels: Multiple band levels can serve as potential support and resistance areas. Overbought/Oversold Trading: Utilize OB/OS signals for potential reversal or pullback trades. Breakout Detection: Monitor price crossovers of the outermost bands for potential breakout trades. ⯁ USER INPUTS Length: Sets the lookback period for calculations (default: 100). Source: Defines the price data used for calculations (default: HLC3). Base ATR Multiplier: Adjusts the base width of the Keltner Channels (default: 0.1). Indicator Lines: Toggle to show additional indicator lines and signals (default: false). ⯁ TECHNICAL NOTES Implements a custom polynomial regression function for efficient trend calculation. Uses dynamic ATR-based volatility adjustment for adaptive channel width. Employs color gradients and opacity levels for intuitive visual representation of market conditions. Utilizes Pine Script's plotchar function for efficient rendering of signals and heatmaps. The Polynomial Regression Keltner Channel indicator offers traders a sophisticated tool for trend analysis, volatility assessment, and trade signal generation. By combining polynomial regression with dynamic Keltner Channels, it provides a comprehensive view of market structure and potential trading opportunities. The indicator's adaptability to different market conditions and its customizable nature make it suitable for various trading styles and timeframes.
Индикатор Pine Script®
от ChartPrime
7