Регистрация

Чудесный осциллятор Билла Вильямса (AO)

CREA Composite MA v3Here's a clean description you can use as the indicator's published description on TradingView: CREA Composite MA v3 — Multi-Layer Confluence Indicator CREA Composite MA is a momentum and trend confluence engine disguised as a moving average. Rather than plotting a single indicator, it combines seven sub-indicators into one normalised 0–100 composite score, then runs that score through three layers of confirmation before generating a signal. The seven components: EMA Bias (EMA10/20 stack and price position) MFI (Money Flow Index) ADX with +DI/−DI directional spread Volatility (inverse ATR%, environment-adjusted) Delta (candle body direction and size) Volume (Z-score, directionally weighted) Momentum (Rate of Change, normalised) Each component is independently normalised to 0–100. Scores above 50 are bullish, below 50 are bearish. All weights are fully adjustable. Three confirmation layers: Layer 1 — Component agreement: counts how many of the 7 sub-indicators individually agree with the direction. A composite score of 65 built on 6/7 components is treated differently from one built on 2 components spiking hard. Layer 2 — HTF filter: rebuilds the full composite on a user-selected higher timeframe (default 15m) and gates signals accordingly. Bull signals are suppressed when the HTF composite is bearish, and vice versa. The HTF line is plotted directly on the pane so both timeframes are visible simultaneously. Layer 3 — Score velocity: measures the 3-bar rate of change of the composite itself. A rising score carries more weight than a flat one at the same level. Two-tier signal system: EARLY (yellow) — fires on signal line crossover when ≥4/7 components agree and HTF is aligned. Appears before the threshold is reached, giving advance warning of a potential confirmed signal. CONFIRMED (green/red) — fires on threshold cross when ≥5/7 components agree and HTF is aligned. Labelled with confidence tier (HIGH / MED / LOW) and agreement count (e.g. BULL HIGH 6/7). BLOCKED (gray) — threshold was crossed but confirmation gates rejected it. Useful for auditing filter performance. Confidence tiers: HIGH — 6–7 components agree + velocity moving in signal direction MED — 5+ components agree LOW — 4+ components agree HUD table (bottom-right) shows all seven component scores in real time, color-coded by strength, alongside the composite score, HTF score and bias, confidence tier, and velocity direction. 7 alert conditions included: Early Bull/Bear, Confirmed Bull/Bear, Blocked Bull/Bear, and HIGH Confidence. All lengths, weights, thresholds, and filter settings are fully configurable via the settings panel.
Индикатор Pine Script®
от ionutz666bzz
SQZ Pro JS [MTF + ADX + Divergencias + Giros]El ecosistema definitivo del Squeeze Momentum. Basado en la estrategia clásica del Squeeze, este indicador ha sido reconstruido desde cero para traders exigentes que buscan precisión matemática y gráficos extremadamente limpios. Hemos eliminado el "ruido" y las señales falsas para centrarnos en lo que realmente importa: la fuerza de la tendencia, la alineación de temporalidades y las divergencias estructurales. 🎯 CARACTERÍSTICAS PRINCIPALES: 1. Motor de Divergencias PRO (Lógica de Olas) Olvídate de las divergencias falsas causadas por pequeños baches en el precio. Este indicador utiliza un rastreador de "Olas" (Wave Tracker) que identifica el pico absoluto de la fuerza compradora/vendedora y lo compara estrictamente con la ola anterior. Regla de Cero Estricta: Las divergencias alcistas solo se calculan en la zona roja (valles) y las bajistas en la zona verde (picos). Trazado limpio "de palo a palo". 2. Panel Dinámico Multi-Timeframe (MTF) Un monitor lateral que te permite escanear el mercado desde 5 Minutos hasta Mensual. La tabla es inteligente: su tamaño se adapta dinámicamente según las temporalidades que actives. Para cada temporalidad, el panel analiza simultáneamente: La dirección del Squeeze. La fuerza de la tendencia (Filtro ADX y cruces DI+/DI- integrados matemáticamente). Eventos en tiempo real (Giros de color y cruces de la línea cero). 3. Señales Verticales de Precisión (Sin ensuciar el gráfico) El indicador traza líneas verticales directamente en tu gráfico solo en la temporalidad en la que te encuentras, marcando los momentos críticos: Giro Buy / Sell: Cuando el momentum cambia de dirección perdiendo fuerza. Cruce 0 UP / DN: Cuando el momentum cruza la línea cero confirmando el cambio de bando. Totalmente personalizables: Elige el grosor, color y estilo (línea sólida, punteada o discontinua) para adaptar el gráfico a tu estilo visual. 4. Estética "Clean Chart" (Cero distracciones) Diseñado para no estorbar. El Momentum se muestra en formato de columnas limpias (Verde oscuro para fuerza creciente, Rojo para fuerza decreciente). Elementos secundarios como el ADX, las líneas DI o los puntos del Squeeze (dots) vienen ocultos de fábrica para mantener el gráfico puro, aunque su matemática sigue trabajando en segundo plano para la tabla MTF. Las etiquetas molestas de la escala de precios han sido desactivadas por defecto. 💡 CÓMO UTILIZARLO: El Panel (El Bosque): Utiliza la tabla MTF para confirmar que las temporalidades mayores (ej. Diario y 4H) están alineadas en la misma dirección (Fuerza + ADX). El Histograma (El Árbol): Busca entradas en tu temporalidad operativa cuando el histograma confirme un "Giro" a favor de la tendencia mayor, o cuando detecte una Divergencia Pro confirmada. ⚙️ CONFIGURACIÓN DE FÁBRICA: El indicador viene pre-configurado para operar "Out of the box" con colores intuitivos y sensibilidad profesional, pero ofrece control absoluto en sus ajustes para activar temporalidades menores (5m, 15m, 30m), mostrar las líneas del ADX o ajustar los periodos del canal de Keltner y las Bandas de Bollinger. (Descargo de responsabilidad: Este indicador es una herramienta de análisis técnico y no constituye asesoramiento financiero. Úsalo en confluencia con tu propia gestión de riesgo).
Индикатор Pine Script®
от FxJorgeSanchez
RatSignal Flow - Composite Momentum Scanner Short Description: Multi-layer momentum oscillator: Fisher Transform + WaveTrend + signal detection. Free from ratsignal.com — premium indicators coming soon. Find more details: ratsignal.com Full Description: 🐀 RatSignal Flow — Composite Momentum Scanner Professional multi-layer oscillator combining three independent momentum engines into one panel. Built by the RatSignal team — the same core signals powering our live 24/7 trading bots on crypto markets. Recommended timeframe: 15 minutes (works on all timeframes, optimized for 15m–4H). ━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPONENTS ▸ Fisher Transform (cyan/orange line with neon glow) Ehlers' Fisher Transform scaled to oscillator range. Statistically detects price reversals earlier than RSI or Stochastic. Toggle glow effect on/off in settings. ▸ WaveTrend Oscillator (blue/orange dual line) Momentum system with dynamic fill between WT1 and WT2. Captures trend shifts with high sensitivity. Neon glow included. ▸ RSI+MFI Histogram (green/red bars) Volume-weighted momentum histogram. Green = buying pressure, Red = selling pressure. ▸ WaveTrend Cross Dots Large circles appear at WT1/WT2 crossover points for quick visual scanning. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━ SIGNALS 🟢 Green Dot — Bullish EMA cross (EMA11 above EMA34) 🟡 Yellow X — Oversold reversal candidate (multi-factor: WaveTrend + RSI + MFI confluence) 🔴 Red X — Bearish EMA warning (EMA5 below EMA11) 🔵 Blue Triangle — Short-term momentum shift 🐀 Green Rat — LONG entry signal (zone-filtered composite — only fires from oversold) 🐀 Red Rat — SHORT entry signal (zone-filtered composite — only fires from overbought) Rat signals are strict and zone-filtered: LONG only triggers when momentum recovers from oversold territory, SHORT only from overbought. This dramatically reduces noise compared to standard crossover signals. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━ HOW TO USE 1. Watch for 🐀 Rat signals as primary entry triggers 2. Confirm direction with WaveTrend position (above/below zero line) 3. Check Fisher Transform color for trend bias (cyan = bullish, orange = bearish) 4. Use the rsiMFI histogram for volume confirmation 5. Green/Yellow/Red markers add extra confluence layers 6. Overbought (60) and Oversold (-60) zones highlight when momentum is extended Works on all crypto pairs — BTC, ETH, SOL, and beyond. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━ FREE — FOR NOW This indicator is 100% free. We're releasing it as a preview of the RatSignal suite. Premium indicators with advanced pattern detection, AI-powered signal filtering, and multi-timeframe confluence analysis are coming to ratsignal.com in the next few months. Follow @ratsignalcrypto here on TradingView and visit ratsignal.com to get early access. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚠️ This is not financial advice. Past performance does not guarantee future results. Always use proper risk management.
Индикатор Pine Script®
от ratsignalcrypto
Trend Momentum Confirmation EngineTrend Momentum Confirmation Engine Trend Momentum Confirmation Engine is a multi-factor technical indicator designed to detect potential market direction by combining several widely used technical analysis methods into a unified confirmation framework. The indicator integrates three different analytical components: • Supertrend – used to determine the prevailing market trend. • Awesome Oscillator (AO) – used to measure momentum shifts and detect early changes in market dynamics. • ADX with DI filters – used to measure the strength of the trend and confirm directional bias. Instead of relying on a single signal source, the script evaluates market conditions using multiple independent modules. Signals are produced when the enabled modules confirm the same directional bias within a defined number of bars. This design helps reduce noise and false signals that can occur when indicators are used individually. Core Logic The indicator operates through three independent modules. Trend Module (Supertrend) The Trend module uses the Supertrend algorithm based on the Average True Range (ATR). It identifies changes in the primary trend direction and provides a structural market bias. Momentum Module (Awesome Oscillator) The momentum module uses the Awesome Oscillator to detect changes in market momentum. Signals are generated when: • the oscillator crosses the zero line • or when a three-bar reversal structure toward the zero line is detected. Trend Strength Module (ADX) The ADX module measures the strength of the current market trend. Directional filters based on DI+ and DI− can optionally be used to ensure that signals align with the dominant directional pressure. Multi-Module Confirmation The script allows traders to enable or disable individual modules. Signals are generated based on the following logic: • If one module is enabled, signals follow that module. • If two modules are enabled, both must confirm direction within the defined confirmation window. • If three modules are enabled, all three must confirm the same directional bias. The confirmation does not need to occur on the same bar. Signals can appear within the configurable confirmation window, allowing slight delays between indicators. Visual Output The indicator provides visual feedback through: • Background highlighting representing the current directional bias • Optional trend guide lines derived from the Supertrend level • Directional arrows marking confirmed signals These visual elements reflect the combined output of the enabled modules. Open-Source Components and Credits This script uses concepts and calculation methods derived from publicly known technical indicators including: • Supertrend • Awesome Oscillator (Bill Williams) • Average Directional Index (ADX) Portions of the implementation are based on open-source Pine Script examples and public indicator concepts available in the TradingView community and documentation. All reused concepts are used as building blocks within a new combined confirmation framework. Usage The indicator can be applied to any market or timeframe. It may be useful for traders who want to evaluate market direction using a combination of trend, momentum, and trend strength. Typical use cases include: • trend continuation setups • filtering momentum signals • reducing false signals in ranging markets. Disclaimer This script is provided for educational and informational purposes only. It does not constitute financial or investment advice. Traders should always perform their own analysis and risk management.
Индикатор Pine Script®
от andriimelnykovenftw
Pro RSI + Stoch + ATR Dashboard (MASTER) by AliMulti-Timeframe Momentum + Volatility Alignment System Trend Filtered MASTER Signals Designed for Structured, Discipline-Based Trading Pro RSI + Stoch + ATR Dashboard (MASTER) by Ali Full Mathematical Logic & Professional Usage Guide This indicator is a multi-timeframe momentum and volatility dashboard designed to combine: RSI (Trend & Strength) Stochastic (Timing & Trigger) ATR & ATR% (Volatility & Risk Control) Alignment Scoring (Market Structure Confirmation) MASTER Signal Logic (Filtered Trade Execution) The goal is simple: Reduce overtrading. Eliminate counter-trend entries. Trade only when momentum alignment confirms structure. 1️⃣ Core Indicators & Mathematical Foundation 🔹 RSI (Relative Strength Index) RSI measures the ratio between average gains and average losses over a defined period. Formula: RSI = 100 − RS = Average Gain / Average Loss Default Length: 14 Key Level: RSI ≥ 50 → bullish momentum bias RSI < 50 → bearish momentum bias In this system, RSI 50 is used as: Trend filter Alignment scoring basis 🔹 Stochastic (K & D) Stochastic measures where price closes relative to its recent range. K line = smoothed momentum line D line = signal line (smoothed K) Default: Length = 14 K smoothing = 3 D smoothing = 3 Trigger logic: K crossing above D → bullish short-term trigger K crossing below D → bearish short-term trigger ⚠ Stochastic alone does NOT generate signals. It only acts as a timing mechanism inside MASTER logic. 🔹 ATR (Average True Range) ATR measures market volatility. True Range (TR) = max(High−Low, |High−PrevClose|, |Low−PrevClose|) ATR = Moving average of TR over N periods Default Length: 14 ATR% = (ATR / Close) × 100 Why ATR% matters: Higher ATR% → wider stops required Lower ATR% → tighter structure, breakout potential 2️⃣ Multi-Timeframe Structure (MTF Logic) The dashboard evaluates 4 timeframes simultaneously: 15m → Entry & Timing 1H → Short-term bias 4H → Structural trend 1D → Market regime Each timeframe displays: RSI Stoch K/D ATR Status This allows structured decision making instead of single-timeframe guessing. 3️⃣ MASTER Logic (Trend + Alignment + Trigger) A MASTER signal is generated ONLY when all three layers align: 🔹 1) Trend Filter (RSI 50 on selected TF) User selects Trend TF (1H / 4H / 1D) If RSI ≥ 50 → LONG ONLY If RSI < 50 → SHORT ONLY This prevents counter-trend trading. tr.tradingview.com 🔹 2) Alignment Score (MTF Confirmation) Alignment counts how many timeframes have RSI ≥ 50. bullCount = sum of bullish RSI conditions (0–4) Score% = (bullCount / 4) × 100 Example: 4/4 (100%) → Full bullish alignment 2/4 (50%) → Mixed / chop conditions 0/4 (0%) → Full bearish regime This prevents trading in unstable market environments. tr.tradingview.com 🔹 3) Trigger (15m Stoch Cross) Entry confirmation uses: 15m K crossing above D → bullish trigger 15m K crossing below D → bearish trigger 4️⃣ MASTER BUY / SELL Conditions MASTER BUY: Trend = LONG ONLY bullCount ≥ Min Bull TF setting 15m Stoch bullish cross MASTER SELL: Trend = SHORT ONLY bullCount ≤ Max Bull TF setting 15m Stoch bearish cross This ensures: Trend + Structure + Timing = One controlled signal. 5️⃣ Reading the Dashboard Table Columns: TIME → timeframe RSI → momentum strength K / D → stochastic timing ATR → volatility STATUS → simplified momentum state STATUS is informational only. It does NOT replace MASTER logic. 6️⃣ Center Info Label Explained Displays: TREND → Active direction filter ALIGN → MTF momentum strength ATR% → Volatility intensity across TFs Professional usage: ALIGN ≥ 75% → Strong trend continuation ALIGN ≤ 50% → Chop / mean reversion zone High ATR% → Adjust risk and position size Low ATR% → Breakout probability increases 7️⃣ Recommended Settings by Trader Type 🔹 General / Balanced: Trend TF: 4H Min Bull BUY: 3 Max Bull SELL: 1 🔹 Intraday: Trend TF: 1H or 4H Min Bull BUY: 2–3 Max Bull SELL: 1–2 🔹 Scalper: Trend TF: 1H Min Bull BUY: 2 Max Bull SELL: 2 🔹 Swing: Trend TF: 1D Min Bull BUY: 3 Max Bull SELL: 1 8️⃣ Professional Trade Workflow Check TREND first Confirm ALIGN strength Wait for 15m trigger Enter with structure-based stop Adjust position size using ATR% This indicator is a structured decision framework, not a random signal generator. Built for traders who value structure over impulse. ⚠ Risk Disclaimer This tool enhances structure and discipline. It does not predict markets. Best performance occurs in aligned trending environments.
Индикатор Pine Script®
от dokuyucuali006
Nico Trend Change Indicator + 2 TP TargetsThe Trend Change Indicator (TCI) is a trend-following momentum tool designed to identify clear trade entries and exits based on the relationship between two moving averages and volatility-adjusted margins. Here is a breakdown of how the indicator works and how to interpret its components: 1. The Core Ribbon (Momentum & Trend) The heart of the indicator is the "Ribbon," formed by a Fast and a Slow-moving average. Green Ribbon (Bullish): This occurs when the Fast length is significantly above the Slow length, indicating strong upward momentum. This serves as your Long Entry signal. Red Ribbon (Bearish): This occurs when the Fast length is significantly below the Slow length, indicating strong downward momentum. This serves as your Put / Short Entry signal. White Ribbon (Neutral/Chop): When the difference between the two averages is smaller than the volatility-based margin (determined by the ATR), the ribbon turns white. This is a No Trade Zone or a Take Profit (TP) Zone. 2. Volatility Filtering (ATR Margin) Unlike a standard moving average crossover, the TCI uses an ATR (Average True Range) Margin. The trend only changes to Bullish or Bearish if the gap between the Fast and Slow lines is larger than a specific percentage of the market's current volatility. This helps filter out "fakeouts" or "noise" during sideways markets where moving averages might cross frequently without a real trend starting. 3. Support/Resistance & Forecast Dots SMA Line: The thick white line is a long-term Simple Moving Average (defaulting to 140 periods). It acts as the primary "baseline." If the price is above this line, the overall bias is bullish; below it, the bias is bearish. Forecast Dots: The white dots appearing ahead of the price are SMA Forecasts. They project where the SMA will likely be in the future based on current price action, helping you visualize potential dynamic support or resistance levels before the price reaches them. 4. Higher Timeframe (HTF) Analysis The indicator includes a built-in "Security" function that looks at a higher timeframe (like the 4H or 12H) regardless of what chart you are currently viewing. The dashboard table uses this to show you if the "Big Trend" (HTF) matches the "Current Trend" (Chart TF). Trading in the direction of both timeframes (e.g., both are Green) typically increases the probability of a successful trade. Summary of Trade Signals
Индикатор Pine Script®
от nio1101
Bullish Divergent Bar DCA Strategy [Skyrexio]Overview Bullish Divergent Bar DCA Strategy is a long-only, multi-layer Dollar-Cost Averaging (DCA) strategy that builds positions around bullish divergent bars formed below the Williams Alligator. It detects potential local bottoms and then scales into the move using up to four pyramiding entries, each with its own size and price threshold. The strategy optionally incorporates Market Facilitation Index (MFI) and Awesome Oscillator (AO) momentum to strengthen reversal confirmation and uses ATR-based take profit on the averaged entry price. Unique Features Layered DCA entries with equity-based sizing . It supports up to four DCA layers, where each additional layer is opened only after a configurable percentage drawdown from the first entry and position size is computed as a fraction of current equity via a geometric weighting scheme. Optional AO and MFI confirmation . Users can require Awesome Oscillator momentum divergence, MFI/volume “squat” bars, or both to confirm that the reversal bar is accompanied by capitulation and weakening downside momentum. ATR-based dynamic take profit . Take profit is defined as a multiple of ATR added to the current average entry price, automatically adjusting exits to prevailing volatility. Built-in DCA visualization . The script can plot the initial entry level and all DCA thresholds to make the averaging structure and risk visually transparent on the chart. Methodology The core entry logic starts from a bullish divergent bar definition: the bar must close above its midpoint (close > hl2) and be the lowest low within the user-defined lookback window, flagging a local swing low. On top of this, the bar must form entirely below all three Alligator lines, ensuring that the pattern appears after a sustained downside move rather than inside noise. If enabled, AO adds a momentum filter by requiring the Awesome Oscillator difference to be negative (descending bar on AO histogram), signaling fading downside momentum at the potential bottom. If the MFI filter is enabled, the bar (or one of the last two bars) must be a “squat” bar where spread narrows while volume increases, approximating effort vs. result exhaustion. ​ Once a valid bullish reversal bar is detected and the time is within the configured trading window, the strategy opens the first DCA layer using a stop entry at the bar’s high (confirmation level), only entering if price actually breaks the bar high. Additional layers (second, third, and fourth entries) are only allowed if price trades below percentage thresholds from the first entry price and a new valid bullish reversal bar forms, thereby averaging down into deep pullbacks while still requiring fresh reversal evidence. While any DCA position is open, the strategy continuously recalculates the take profit as the current volume-weighted average entry price plus ATR multiplied by a user-defined factor. All individual entries share the same take profit level through separate strategy exit calls, so the entire stacked position exits together once price has moved sufficiently above the averaged entry. Strategy settings In the inputs window, users can configure the following strategy settings: sourceUuid / secretToken: Identifiers used to format JSON alerts for automated execution through webhooks. Trade Start Date/Time: Beginning of the backtest/live-trading window. Trade Stop Date/Time: End of the backtest/live-trading window. Show DCA Levels (default = false): Toggles plotting of the initial entry level and all three DCA thresholds on the chart. Enable MFI (default = false): Enables the MFI-style volume/spread filter. Enable AO (default = false): Enables Awesome Oscillator confirmation. Number Of Bar For Lowest Bar (default = 7): Lookback window used to identify the lowest low bar for the bullish reversal bar condition. Layer 2 Threshold Percent (default = 4.0): Percentage drop from the first layer price that must be reached to allow the second DCA entry. Layer 3 Threshold Percent (default = 10.0): Percentage drop from the first layer price required to unlock the third DCA layer. Layer 4 Threshold Percent (default = 22.0): Percentage drop from the first layer price required to unlock the fourth DCA layer. Position Size Multiplier (default = 2.0): Multiplier used in the geometric weighting scheme to determine how much equity is allocated to each additional DCA layer. Number Of ATR For Take Profit (default = 2.0): ATR multiple added to the current average entry price to calculate the shared take profit for all open layers. Users can refine these parameters during backtesting to fit the volatility profile and structure of the specific asset and timeframe. Justification of Methodology Before understanding why this particular combination of indicator has been chosen let's briefly explain what is Williams Alligator, MFI and AO. let’s start with the Williams Alligator. Developed by Bill Williams, the Alligator is a technical indicator that identifies trends and potential market reversals. It consists of three smoothed moving averages: Jaw (Blue Line): The slowest of the three, based on a 13-period smoothed moving average shifted 8 bars ahead. Teeth (Red Line): The medium-speed line, derived from an 8-period smoothed moving average shifted 5 bars forward. Lips (Green Line): The fastest line, calculated using a 5-period smoothed moving average shifted 3 bars forward. When the lines diverge and align in order, the "Alligator" is "awake," signaling a strong trend. When the lines overlap or intertwine, the "Alligator" is "asleep," indicating a range-bound or sideways market. This indicator helps traders determine when to enter or avoid trades. The Awesome Oscillator (AO), developed by Bill Williams, is a momentum indicator designed to measure market momentum by contrasting recent price movements with a longer-term historical perspective. It helps traders detect potential trend reversals and assess the strength of ongoing trends. The formula for AO is as follows: AO = SMA5(Median Price) − SMA34(Median Price) where: Median Price = (High + Low) / 2 SMA5 = 5-period Simple Moving Average of the Median Price SMA 34 = 34-period Simple Moving Average of the Median Price The Market Facilitation Index (MFI) is a technical indicator that measures the price movement per unit of volume, helping traders gauge the efficiency of price movement in relation to trading volume. Here's how you can calculate it: MFI = (High−Low)/Volume MFI can be used in combination with volume, so we can divide 4 states. Bill Williams introduced these to help traders interpret the interaction between volume and price movement. Here’s a quick summary: Green Window (Increased MFI & Increased Volume): Indicates strong momentum with both price and volume increasing. Often a sign of trend continuation, as both buying and selling interest are rising. Fake Window (Increased MFI & Decreased Volume): Shows that price is moving but with lower volume, suggesting weak support for the trend. This can signal a potential end of the current trend. Squat Window (Decreased MFI & Increased Volume): Shows high volume but little price movement, indicating a tug-of-war between buyers and sellers. This often precedes a breakout as the pressure builds. Fade Window (Decreased MFI & Decreased Volume): Indicates a lack of interest from both buyers and sellers, leading to lower momentum. This typically happens in range-bound markets and may signal consolidation before a new move. For our purposes we are interested in squat bars. This is the sign that volume cannot move the price easily. This type of bar increases the probability of trend reversal. In this indicator we added to enable the MFI filter of reversal bars. If potential divergent bar or two preceding bars have squat state this bar can be interpret as a reversal one. The strategy intentionally focuses on bullish divergent bars forming at local lows and below the Alligator to catch potential exhaustion points in downtrends where risk/reward becomes asymmetric. The Alligator (Jaw, Teeth, Lips) acts as a dynamic structure filter: requiring price to be below all three lines before reversal helps avoid chasing minor pullbacks inside an ongoing uptrend and instead concentrates entries on deeper corrections where mean reversion potential is higher. The custom bullish divergent bar rule (close above midpoint and being the lowest low over N bars) approximates a local capitulation candle, which often precedes short squeezes or at least strong reactions. By combining this with AO and MFI-style filters, the strategy further increases the likelihood that the pattern coincides with downside momentum(as a confirmation that current trend is downward, AO difference < 0) and effort vs. result anomalies (squat bars), which is common signatures of trend exhaustion. The DCA structure is designed to deploy capital progressively rather than all at once: the first entry is triggered only if price confirms the reversal by breaking above the bar’s high, while subsequent layers require both a deeper discount relative to the initial entry and a new bullish reversal signal. Percentage thresholds from the first entry ensure that each additional allocation is made at meaningfully better prices, improving the blended entry level and reducing the break-even distance. Finally, using ATR as the basis for take profit aligns exits with current volatility. A fixed-percentage target can be too tight in volatile regimes or too loose in quiet markets, whereas ATR-based targets scale with average bar range. Applying ATR to the evolving average entry price of all open layers keeps the risk/reward framework consistent across different volatility regimes and DCA configurations. Backtest Results Operating window: Date range of backtests is 2025.01.01 - 2026.01.01. It is chosen to let the strategy to close all opened positions. Commission and Slippage: Includes a standard Binance commission of 0.1% and accounts for possible slippage over 5 ticks. Initial capital: 10000 USDT Maximum Single Position Loss: -6.56% Maximum Single Profit: +4.92% Net Profit: +934.08 USDT (+9.34%) Total Trades: 121 (82.64% win rate) Profit Factor: 2.948 Maximum Accumulated Loss: 624.72 USDT (-6.15%) Average Profit per Trade: 7.72 USDT (+0.37%) Average Trade Duration: 60 hours These results are obtained with realistic parameters representing trading conditions observed at major exchanges such as Binance and with realistic trading portfolio usage parameters. You should run your own backtests on the target asset and timeframe (for example, BTC/USDT on intraday charts) and adjust threshold percentages, layer sizing, and ATR take profit factor to match your risk tolerance and market conditions. How to Use Add the script to favorites for easy access. Apply to the desired timeframe and chart. Configure settings using the dropdown choice list in the built-in menu. Set up alerts to automate strategy positions through web hook with the text: {{strategy.order.alert_message}} Disclaimer: Educational and informational tool reflecting Skyrex commitment to informed trading. Past performance does not guarantee future results. Test strategies in a simulated environment before live implementation
Стратегия Pine Script®
от Skyrexio
AI Oversold Swing - Screener//@version=5 indicator("AI Oversold Swing - Screener", overlay=false) // ───────────────────────── // USER INPUTS // ───────────────────────── maxPrice = input.float(75.0, "Max Price ($)") rsiLen = input.int(14, "RSI Length") rsiOversold = input.float(35.0, "RSI Oversold Level") bbLen = input.int(20, "BB Length") bbMult = input.float(2.0, "BB StdDev") supportLen = input.int(20, "Support Lookback (days)") nearSupportPct = input.float(1.5, "Near Support %") undercutPct = input.float(0.5, "Allowed Undercut %") atrLen = input.int(14, "ATR Length") maxATRfromSup = input.float(1.0, "Max ATR From Support") minDollarVol = input.float(75000000.0, "Min Dollar Volume", step=1000000) requireTrigger = input.bool(false, "Require Reversal Trigger") // ───────────────────────── // DAILY DATA (screener uses indicator outputs) // ───────────────────────── dClose = request.security(syminfo.tickerid, "D", close) dLow = request.security(syminfo.tickerid, "D", low) dVol = request.security(syminfo.tickerid, "D", volume) dPrevC = request.security(syminfo.tickerid, "D", close ) // ───────────────────────── // INDICATORS // ───────────────────────── rsi = ta.rsi(dClose, rsiLen) basis = ta.sma(dClose, bbLen) dev = bbMult * ta.stdev(dClose, bbLen) bbLow = basis - dev atr = request.security(syminfo.tickerid, "D", ta.atr(atrLen)) support = ta.lowest(dLow, supportLen) distPct = support > 0 ? (dClose - support) / support * 100.0 : na distATR = atr > 0 ? (dClose - support) / atr : na dollarVol = dClose * dVol // ───────────────────────── // CONDITIONS // ───────────────────────── priceOK = dClose > 0 and dClose <= maxPrice liqOK = dollarVol >= minDollarVol oversold = (rsi <= rsiOversold) and (dClose <= bbLow) nearSup = support > 0 and dClose <= support * (1 + nearSupportPct / 100.0) and dClose >= support * (1 - undercutPct / 100.0) and distATR <= maxATRfromSup setup = priceOK and liqOK and oversold and nearSup // Optional reversal confirmation rsiReversal = ta.crossover(rsi, rsiOversold) greenCandle = dClose > dPrevC trigger = rsiReversal or greenCandle signal = requireTrigger ? (setup and trigger) : setup // ───────────────────────── // SCREENER OUTPUTS // ───────────────────────── plot(signal ? 1 : 0, title="Signal (1 = YES)") plot(rsi, title="RSI (Daily)") plot(distPct, title="Dist to Support % (Daily)") plot(distATR, title="Dist to Support ATR (Daily)") plot(dollarVol, title="Dollar Volume (Daily)")
Индикатор Pine Script®
от reconranger227
FluidFlow OscillatorFluidFlow Oscillator: Study Material for Traders Overview The FluidFlow Oscillator is a custom technical indicator designed to measure price momentum and market flow dynamics by simulating fluid motion concepts such as velocity, viscosity, and turbulence. It helps traders identify potential buy and sell signals along with trend strength, momentum direction, and volatility conditions. This study explains the underlying calculation concepts, signal logic, visual cues, and how to interpret the professional dashboard table that summarizes key indicator readings. ________________________________________ How the FluidFlow Oscillator Works Core Mechanisms 1. Price Flow Velocity o Measures the rate of change of price over a specified flow length (default 40 bars). o Calculated as a percentage change of closing price: roc=close−closelen_flowcloselen_flow×100\text{roc} = \frac{\text{close} - \text{close}_{len\_flow}}{\text{close}_{len\_flow}} \times 100roc=closelen_flowclose−closelen_flow×100 o Smoothed by an EMA (Exponential Moving Average) to reduce noise, generating a "flow velocity" value. 2. Viscosity Factor o Analogous to fluid viscosity, it adjusts the flow velocity based on recent price volatility. o Volatility is computed as the standard deviation of close prices over the flow length. o The viscosity acts as a damping factor to slow down the flow velocity in highly volatile conditions. o This results in a "flow with viscosity" value, that smooths out the velocity considering market turbulence. 3. Turbulence Burst o Captures sudden changes or bursts in the flow by measuring changes between successive viscosity-adjusted flows. o The turbulence value is a smoothed absolute change in flow. o A burst boost factor is added to the oscillator to incorporate this rapid change component, amplifying signals during sudden shifts. 4. Oscillator Calculation o The raw oscillator value is the sum of flow with viscosity plus burst boost, scaled by 10. o Clamped between -100 and +100 to limit extremes. o Finally, smoothed again by EMA for cleaner visualization. ________________________________________ Signal Logic The oscillator works with complementary components to produce actionable signals: • Signal Line: An EMA-smoothed version of the oscillator for generating crossover-based signals. • Momentum: The rate of change of the oscillator itself, smoothed by EMA. • Trend: Uses fast (21-period EMA) and slow (50-period EMA) moving averages of price to identify market trend direction (uptrend, downtrend, or sideways). Signal Conditions • Bullish Signal (Buy): Oscillator crosses above the oversold threshold with positive momentum. • Bearish Signal (Sell): Oscillator crosses below the overbought threshold with negative momentum. Statuses The oscillator provides descriptive market states based on level and momentum: • Overbought • Oversold • Buy Signal • Sell Signal • Bullish / Bearish (momentum-driven) • Neutral (no clear trend) ________________________________________ Color System and Visualization The oscillator uses a sophisticated HSV color model adapting hues according to: • Oscillator value magnitude and sign (positive or negative) • Acceleration of oscillator changes • Smooth color gradients to facilitate intuitive understanding of trend strength and momentum shifts Background colors highlight overbought (red tint) and oversold (green tint) zones with transparency. ________________________________________ How to Understand the Professional Dashboard Table The FluidFlow Oscillator offers an integrated table at the bottom center of the chart. This dashboard summarizes critical indicator readings in 8 columns across 3 rows: Column Description SIGNAL Current signal status (e.g., Buy, Sell, Overbought) with color coding OSCILLATOR Current oscillator value (-100 to +100) with color reflecting intensity and direction MOMENTUM Momentum bias indicating strength/direction of oscillator changes (Strong Up, Up, Sideways, Down, Strong Down) TREND Current trend status based on EMAs (Strong Uptrend, Uptrend, Sideways, Downtrend, Strong Downtrend) VOLATILITY Volatility percentage relative to average, indicating market activity level FLOW Flow velocity value describing price momentum magnitude and direction TURBULENCE Turbulence level indicating sudden bursts or spikes in price movement PROGRESS Oscillator's position mapped as a percentage (0% to 100%) showing proximity to extreme levels Rows Explained • Row 1 (Header): Labels for each metric. • Row 2 (Values): Current numerical or descriptive values color-coded along a professional scheme: o Green or lime tones indicate positive or bullish conditions. o Red or orange tones indicate caution, sell signals, or bearish conditions. o Blue tones indicate neutral or stable conditions. • Row 3 (Status Indicators): Emoji-like icons and bars provide a quick visual gauge of each metric's intensity or signal strength: o For example, "🟢🟢🟢" suggests very strong bullish momentum, while "🔴🔴🔴" suggests strong bearish momentum. o Progress bar visually demonstrates oscillator movement toward oversold or overbought extremes. ________________________________________ Practical Interpretation Tips • A Buy signal with green colors and strong momentum usually precedes upward price moves. • An Overbought status with red background and red table colors warns of potential price corrections or reversals. • Watch the Turbulence to gauge market instability; spikes may precede price shocks or volatility bursts. • Confirm signals with the Trend and Momentum columns to avoid false entries. • Use the Progress bar to anticipate oscillations approaching key threshold levels for timing trades. ________________________________________ Alerts The oscillator supports alerts for: • Buy and sell signals based on oscillator crossovers. • Overbought and oversold levels reached. These help traders automate awareness of important market conditions. ________________________________________ Disclaimer The FluidFlow Oscillator and its signals are for educational and informational purposes only. They do not guarantee profits and should not be considered as financial advice. Always conduct your own research and use proper risk management when trading. Past performance is not indicative of future results. ________________________________________ This detailed explanation should help you understand the workings of the FluidFlow Oscillator, its components, signal logic, and how to analyze its professional dashboard for informed trading decisions.
Индикатор Pine Script®
от aiTrendview-Charting-System
3
Indicador Millo SMA20-SMA200-AO-RSI M1This indicator is designed for scalping in 1-minute timeframes on crypto pairs, combining trend direction, momentum, and oscillator confirmation. Logic: Trend Filter: Only BUY signals when price is above the SMA200. Only SELL signals when price is below the SMA200. Entry Trigger: BUY: Price crosses above the SMA20. SELL: Price crosses below the SMA20. Confirmation Window: After the price cross, the Awesome Oscillator (AO) must cross the zero line in the same direction within a maximum of N bars (configurable, default = 4). RSI must be > 50 for BUY and < 50 for SELL at the moment AO confirms. Cooldown: A cooldown period (configurable, default = 10 bars) prevents multiple signals of the same type in a short time, reducing noise in sideways markets. Features: Works on any crypto pair and can be used in other markets. Adjustable confirmation window, RSI threshold, and cooldown. Alerts ready for BUY and SELL conditions. Can be converted into a strategy for backtesting with TP/SL. Suggested Use: Pair: BTC/USDT M1 or similar high-liquidity asset. Combine with manual support/resistance or higher timeframe trend analysis. Recommended to confirm entries visually and with additional confluence before trading live.
Индикатор Pine Script®
от hernangarcia_78
2
SCTI-RSKSCTI-RSK 是一个多功能技术指标合集，整合了多种常用技术指标于一个图表中，方便交易者综合分析市场状况。该指标包含以下五个主要技术指标模块，每个模块都可以单独显示或隐藏： Stoch RSI - 随机相对强弱指数 KDJ - 随机指标 RSI - 相对强弱指数 CCI - 商品通道指数 Williams %R - 威廉指标 主要特点 模块化设计：每个指标都可以单独开启或关闭显示 交叉信号可视化：Stoch RSI和KDJ的金叉/死叉信号有彩色填充标识 多时间框架分析：支持不同长度的参数设置 直观界面：清晰的参数分组和颜色区分 适用场景 趋势判断 超买超卖区域识别 交易信号确认 多指标共振分析 English Description SCTI-RSK is a comprehensive technical indicator that combines multiple popular indicators into a single chart for traders to analyze market conditions holistically. The indicator includes the following five main technical indicator modules, each can be toggled on/off individually: Stoch RSI - Stochastic Relative Strength Index KDJ - Stochastic Oscillator RSI - Relative Strength Index CCI - Commodity Channel Index Williams %R - Williams Percent Range Key Features Modular Design: Each indicator can be shown or hidden independently Visual Crossover Signals: Golden/Death crosses are highlighted with color fills for Stoch RSI and KDJ Multi-Timeframe Analysis: Supports different length parameters Intuitive Interface: Clear parameter grouping and color differentiation Use Cases Trend identification Overbought/Oversold zone recognition Trade signal confirmation Multi-indicator confluence analysis 参数说明 (Parameter Explanation) 指标参数分为6个主要组别： 基础指标设置 - 控制各指标的显示/隐藏 Stoch RSI 设置 - 包括K值、D值、RSI长度等参数 KDJ 设置 - 包括周期、信号线等参数 RSI 设置 - 包括RSI长度、中期长度等参数 CCI 设置 - 包括CCI长度、中期长度等参数 Williams %R 设置 - 包括长度参数 使用建议 (Usage Suggestions) 初次使用时，可以先开启所有指标观察它们的相互关系 根据个人交易风格调整各指标的长度参数 关注多指标同时发出信号时的交易机会 结合价格行为和其他分析工具确认信号 更新日志 (Changelog) v1.0 初始版本，整合五大技术指标
Индикатор Pine Script®
от Erens_Freedom
AO/AC Zones (Log Price)William's AO/AC Zones scaled to work with log-price AO/AC indicators. When the log AO and log AC are green = price bar is painted green When the log AO and log AC are different = price bar painted gray When the log AO and log AC are red = price bar painted red Useful for seeing when momentum is beginning to increase or decrease, and direction on the AO/AC could be changing. Can also be used with William's standard entry and exit signals. Works with the log indicators, made for volatile and long-term charts which exhibit logarithmic trends.
Индикатор Pine Script®
от Intuit
AO Smart Scalper – 5M Dynamic SL Edition📈 AO Signals with Fixed and Dynamic SL – Optimized for 5-Minute Charts 📉 This indicator is built for 5-minute timeframe trading, combining powerful momentum signals from the Awesome Oscillator (AO) with both Fixed and Dynamic Stop Loss (SL) levels to enhance trade management and risk control. ✅ Buy/Sell Signals: The indicator generates clear BUY and SELL signals based on the AO crossing above or below the zero line, helping traders capture momentum shifts early. 🛑 Fixed Stop Loss: Each trade signal comes with a Fixed SL, calculated based on the high (for shorts) or low (for longs) of the previous candle, with a customizable percentage offset. This SL is plotted with a red line, providing a clear initial risk level. ⚡ Dynamic Stop Loss: Continuous Presence, Strategic Use: A secondary Dynamic SL line is plotted, which is continuously present on the chart. This dynamic level responds to market conditions and can serve as a trailing stop or key decision point. 💡 Recommended Use: It is recommended to actively start using the Dynamic SL once the trade has moved into profit. This allows protecting obtained profits and minimizing the risk of losses in case of a market reversal. 🛡️ Enhanced Dynamic Stop-Loss Strategy: 🔒 Initial Protection: Utilize the Fixed SL as the initial stop-loss, placed below relevant lows (for longs) or above relevant highs (for shorts), or as provided by the fixed SL indicator. 🛤️ Dynamic Tracking: 🟢 Long Trades: Once in profit, the Dynamic SL will dynamically adjust, moving upwards as higher lows are formed, effectively trailing the price and securing profits. 🔴 Short Trades: Conversely, in short trades, once in profit, the Dynamic SL will move downwards as lower highs are formed, protecting gains. 🔄 Alternatively the dynamic stop loss will follow the dynamic SL line provided by the indicator. 🚪 Exiting Trades: When the price crosses below the Dynamic SL line in a LONG trade, or above it in a SHORT trade, the recommended action is to exit the trade. ↩️ Re-entry Consideration: You may consider re-entering only if the price clearly returns above the Dynamic SL (for longs) or below it (for shorts). ⚠️ IMPORTANT - 5-Minute Strategy Guidance ⏱️ This tool is specifically optimized for the 5-minute timeframe. This approach helps filter out weak setups and maintain discipline in volatile market conditions. ✨ Additional Features: 👁️ Visual and editable SL levels 📊 200-period SMA for trend context 💻 Simple and effective interface for intraday trading setups 🎯 Ideal for traders seeking a clean, rule-based system that combines momentum entry signals with layered stop loss protection. 🔑 Key Changes: It was emphasized that the Dynamic SL is always present, but its active use is recommended once the trade is in profit. It was clarified the use of the Fixed SL, giving the option to use the one provided by the indicator, or to place it according to the price action.
Индикатор Pine Script®
от Magrone
3
AO/AC Trading Zones Strategy [Skyrexio] Overview AO/AC Trading Zones Strategy leverages the combination of Awesome Oscillator (AO), Acceleration/Deceleration Indicator (AC), Williams Fractals, Williams Alligator and Exponential Moving Average (EMA) to obtain the high probability long setups. Moreover, strategy uses multi trades system, adding funds to long position if it considered that current trend has likely became stronger. Combination of AO and AC is used for creating so-called trading zones to create the signals, while Alligator and Fractal are used in conjunction as an approximation of short-term trend to filter them. At the same time EMA (default EMA's period = 100) is used as high probability long-term trend filter to open long trades only if it considers current price action as an uptrend. More information in "Methodology" and "Justification of Methodology" paragraphs. The strategy opens only long trades. Unique Features No fixed stop-loss and take profit: Instead of fixed stop-loss level strategy utilizes technical condition obtained by Fractals and Alligator to identify when current uptrend is likely to be over. In some special cases strategy uses AO and AC combination to trail profit (more information in "Methodology" and "Justification of Methodology" paragraphs) Configurable Trading Periods: Users can tailor the strategy to specific market windows, adapting to different market conditions. Multilayer trades opening system: strategy uses only 10% of capital in every trade and open up to 5 trades at the same time if script consider current trend as strong one. Short and long term trend trade filters: strategy uses EMA as high probability long-term trend filter and Alligator and Fractal combination as a short-term one. Methodology The strategy opens long trade when the following price met the conditions: 1. Price closed above EMA (by default, period = 100). Crossover is not obligatory. 2. Combination of Alligator and Williams Fractals shall consider current trend as an upward (all details in "Justification of Methodology" paragraph) 3. Both AC and AO shall print two consecutive increasing values. At the price candle close which corresponds to this condition algorithm opens the first long trade with 10% of capital. 4. If combination of Alligator and Williams Fractals shall consider current trend has been changed from up to downtrend, all long trades will be closed, no matter how many trades has been opened. 5. If AO and AC both continue printing the rising values strategy opens the long trade on each candle close with 10% of capital while number of opened trades reaches 5. 6. If AO and AC both has printed 5 rising values in a row algorithm close all trades if candle's low below the low of the 5-th candle with rising AO and AC values in a row. Script also has additional visuals. If second long trade has been opened simultaneously the Alligator's teeth line is plotted with the green color. Also for every trade in a row from 2 to 5 the label "Buy More" is also plotted just below the teeth line. With every next simultaneously opened trade the green color of the space between teeth and price became less transparent. Strategy settings In the inputs window user can setup strategy setting: EMA Length (by default = 100, period of EMA, used for long-term trend filtering EMA calculation). User can choose the optimal parameters during backtesting on certain price chart. Justification of Methodology Let's explore the key concepts of this strategy and understand how they work together. We'll begin with the simplest: the EMA. The Exponential Moving Average (EMA) is a type of moving average that assigns greater weight to recent price data, making it more responsive to current market changes compared to the Simple Moving Average (SMA). This tool is widely used in technical analysis to identify trends and generate buy or sell signals. The EMA is calculated as follows: 1.Calculate the Smoothing Multiplier: Multiplier = 2 / (n + 1), Where n is the number of periods. 2. EMA Calculation EMA = (Current Price) × Multiplier + (Previous EMA) × (1 − Multiplier) In this strategy, the EMA acts as a long-term trend filter. For instance, long trades are considered only when the price closes above the EMA (default: 100-period). This increases the likelihood of entering trades aligned with the prevailing trend. Next, let’s discuss the short-term trend filter, which combines the Williams Alligator and Williams Fractals. Williams Alligator Developed by Bill Williams, the Alligator is a technical indicator that identifies trends and potential market reversals. It consists of three smoothed moving averages: Jaw (Blue Line): The slowest of the three, based on a 13-period smoothed moving average shifted 8 bars ahead. Teeth (Red Line): The medium-speed line, derived from an 8-period smoothed moving average shifted 5 bars forward. Lips (Green Line): The fastest line, calculated using a 5-period smoothed moving average shifted 3 bars forward. When the lines diverge and align in order, the "Alligator" is "awake," signaling a strong trend. When the lines overlap or intertwine, the "Alligator" is "asleep," indicating a range-bound or sideways market. This indicator helps traders determine when to enter or avoid trades. Fractals, another tool by Bill Williams, help identify potential reversal points on a price chart. A fractal forms over at least five consecutive bars, with the middle bar showing either: Up Fractal: Occurs when the middle bar has a higher high than the two preceding and two following bars, suggesting a potential downward reversal. Down Fractal: Happens when the middle bar shows a lower low than the surrounding two bars, hinting at a possible upward reversal. Traders often use fractals alongside other indicators to confirm trends or reversals, enhancing decision-making accuracy. How do these tools work together in this strategy? Let’s consider an example of an uptrend. When the price breaks above an up fractal, it signals a potential bullish trend. This occurs because the up fractal represents a shift in market behavior, where a temporary high was formed due to selling pressure. If the price revisits this level and breaks through, it suggests the market sentiment has turned bullish. The breakout must occur above the Alligator’s teeth line to confirm the trend. A breakout below the teeth is considered invalid, and the downtrend might still persist. Conversely, in a downtrend, the same logic applies with down fractals. In this strategy if the most recent up fractal breakout occurs above the Alligator's teeth and follows the last down fractal breakout below the teeth, the algorithm identifies an uptrend. Long trades can be opened during this phase if a signal aligns. If the price breaks a down fractal below the teeth line during an uptrend, the strategy assumes the uptrend has ended and closes all open long trades. By combining the EMA as a long-term trend filter with the Alligator and fractals as short-term filters, this approach increases the likelihood of opening profitable trades while staying aligned with market dynamics. Now let's talk about the trading zones concept and its signals. To understand this we need to briefly introduce what is AO and AC. The Awesome Oscillator (AO), developed by Bill Williams, is a momentum indicator designed to measure market momentum by contrasting recent price movements with a longer-term historical perspective. It helps traders detect potential trend reversals and assess the strength of ongoing trends. The formula for AO is as follows: AO = SMA5(Median Price) − SMA34(Median Price) where: Median Price = (High + Low) / 2 SMA5 = 5-period Simple Moving Average of the Median Price SMA 34 = 34-period Simple Moving Average of the Median Price The Acceleration/Deceleration (AC) Indicator, introduced by Bill Williams, measures the rate of change in market momentum. It highlights shifts in the driving force of price movements and helps traders spot early signs of trend changes. The AC Indicator is particularly useful for identifying whether the current momentum is accelerating or decelerating, which can indicate potential reversals or continuations. For AC calculation we shall use the AO calculated above is the following formula: AC = AO − SMA5(AO) , where SMA5(AO)is the 5-period Simple Moving Average of the Awesome Oscillator When the AC is above the zero line and rising, it suggests accelerating upward momentum. When the AC is below the zero line and falling, it indicates accelerating downward momentum. When the AC is below zero line and rising it suggests the decelerating the downtrend momentum. When AC is above the zero line and falling, it suggests the decelerating the uptrend momentum. Now let's discuss the trading zones concept and how it can create the signal. Zones are created by the combination of AO and AC. We can divide three zone types: Greed zone: when the AO and AC both are rising Red zone: when the AO and AC both are decreasing Gray zone: when one of AO or AC is rising, the other is falling Gray zone is considered as uncertainty. AC and AO are moving in the opposite direction. Strategy skip such price action to decrease the chance to stuck in the losing trade during potential sideways. Red zone is also not interesting for the algorithm because both indicators consider the trend as bearish, but strategy opens only long trades. It is waiting for the green zone to increase the chance to open trade in the direction of the potential uptrend. When we have 2 candles in a row in the green zone script executes a long trade with 10% of capital. Two green zone candles in a row is considered by algorithm as a bullish trend, but now so strong, that's the reason why trade is going to be closed when the combination of Alligator and Fractals will consider the the trend change from bullish to bearish. If id did not happens, algorithm starts to count the green zone candles in a row. When we have 5 in a row script change the trade closing condition. Such situation is considered is a high probability strong bull market and all trades will be closed if candle's low will be lower than fifth green zone candle's low. This is used to increase probability to secure the profit. If long trades are initiated, the strategy continues utilizing subsequent signals until the total number of trades reaches a maximum of 5. Each trade uses 10% of capital. Why we use trading zones signals? If currently strategy algorithm considers the high probability of the short-term uptrend with the Alligator and Fractals combination pointed out above and the long-term trend is also suggested by the EMA filter as bullish. Rising AC and AO values in the direction of the most likely main trend signaling that we have the high probability of the fastest bullish phase on the market. The main idea is to take part in such rapid moves and add trades if this move continues its acceleration according to indicators. Backtest Results Operating window: Date range of backtests is 2023.01.01 - 2024.12.31. It is chosen to let the strategy to close all opened positions. Commission and Slippage: Includes a standard Binance commission of 0.1% and accounts for possible slippage over 5 ticks. Initial capital: 10000 USDT Percent of capital used in every trade: 10% Maximum Single Position Loss: -9.49% Maximum Single Profit: +24.33% Net Profit: +4374.70 USDT (+43.75%) Total Trades: 278 (39.57% win rate) Profit Factor: 2.203 Maximum Accumulated Loss: 668.16 USDT (-5.43%) Average Profit per Trade: 15.74 USDT (+1.37%) Average Trade Duration: 60 hours How to Use Add the script to favorites for easy access. Apply to the desired timeframe and chart (optimal performance observed on 4h BTC/USDT). Configure settings using the dropdown choice list in the built-in menu. Set up alerts to automate strategy positions through web hook with the text: {{strategy.order.alert_message}} Disclaimer: Educational and informational tool reflecting Skyrex commitment to informed trading. Past performance does not guarantee future results. Test strategies in a simulated environment before live implementation These results are obtained with realistic parameters representing trading conditions observed at major exchanges such as Binance and with realistic trading portfolio usage parameters.
Стратегия Pine Script®
от Skyrexio
Strength of Divergence Across Multiple Indicators (+CMF&VWMACD)Modified Version of Strength of Divergence Across Multiple Indicators by reees Purpose: This Pine Script indicator is designed to identify and evaluate the strength of bullish and bearish divergences across multiple technical indicators. Divergences occur when the price of an asset is moving in one direction while a technical indicator is moving in the opposite direction, potentially signaling a trend reversal. Key Features: 1. Multiple Indicator Support: The script now analyzes divergences for the following indicators: * RSI (Relative Strength Index) * OBV (On-Balance Volume) * MACD (Moving Average Convergence/Divergence) * STOCH (Stochastic Oscillator) * CCI (Commodity Channel Index) * MFI (Money Flow Index) * AO (Awesome Oscillator) * CMF (Chaikin Money Flow) - Newly added * VWMACD (Volume-Weighted MACD) - Newly added 2. Customizable Divergence Parameters: * Bullish/Bearish: Enable or disable the detection of bullish and bearish divergences independently. * Regular/Hidden: Detect both regular and hidden divergences (hidden divergences can indicate trend continuation). * Broken Trendline Exclusion: Optionally ignore divergences where the trendline connecting price pivots is broken by an intermediate pivot. * Pivot Lookback Periods: Adjust the number of bars used to identify valid pivot highs and lows for divergence calculations. * Weighting: Assign different weights to regular vs. hidden divergences and to the relative change in price vs. the indicator. 3. Indicator-Specific Settings: * Weight: Each indicator can be assigned a weight, influencing its contribution to the overall divergence strength calculation. * Extreme Value: Define a threshold above which an indicator's divergence is considered "extreme," giving it a higher strength rating. 4. Divergence Strength Calculation: * For each indicator, the script calculates a divergence "degree" based on the magnitude of the divergence and the user-defined weightings. * The total divergence strength is the sum of the individual indicator divergence degrees. * Strength is categorized as "Extreme," "Very strong," "Strong," "Moderate," "Weak," or "Very weak." 5. Visualization: * Divergence Lines: The script draws lines on the chart connecting the price and indicator pivots that form a divergence (optional, with customizable transparency). * Labels: Labels display the total divergence strength and a breakdown of each indicator's contribution. The size and visibility of labels are based on the strength. 6. Alerts: * The script can generate alerts when the total divergence strength exceeds a user-defined threshold. New Indicators (CMF and VWMACD): * Chaikin Money Flow (CMF): * Purpose: Measures the buying and selling pressure by analyzing the relationship between price, volume, and the accumulation/distribution line. * Divergence: A bullish CMF divergence occurs when the price makes a lower low, but the CMF makes a higher low (suggesting increasing buying pressure). A bearish divergence is the opposite. * Volume-Weighted MACD (VWMACD): * Purpose: Similar to the standard MACD but uses volume-weighted moving averages instead of simple moving averages, giving more weight to periods with higher volume. * Divergence: Divergences are interpreted similarly to the standard MACD, but the VWMACD can be more sensitive to volume changes. How It Works (Simplified): 1. Pivot Detection: The script identifies pivot highs and lows in both price and the selected indicators using the specified lookback periods. 2. Divergence Check: For each indicator: * It checks if a series of pivots in price and the indicator are diverging (e.g., price makes a lower low, but the indicator makes a higher low for a bullish divergence). * It calculates the divergence degree based on the difference in price and indicator values, weightings, and whether it's a regular or hidden divergence. 3. Strength Aggregation: The script sums up the divergence degrees of all enabled indicators to get the total divergence strength. 4. Visualization and Alerts: It draws lines and labels on the chart to visualize the divergences and generates alerts if the total strength exceeds the set threshold. Benefits: * Comprehensive Divergence Analysis: By considering multiple indicators, the script provides a more robust assessment of potential trend reversals. * Customization: The many adjustable parameters allow traders to fine-tune the script to their specific trading style and preferences. * Objective Strength Evaluation: The divergence strength calculation and categorization offer a more objective way to evaluate the significance of divergences. * Early Warning System: Divergences can often precede significant price movements, making this script a valuable tool for anticipating potential trend changes. * Volume Confirmation: The inclusion of CMF and VWMACD add volume-based confirmation to the divergence signals, potentially increasing their reliability. Limitations: * Lagging Indicators: Most of the indicators used are lagging, meaning they are based on past price data. Divergences may sometimes occur after a significant price move has already begun. * False Signals: No indicator is perfect, and divergences can sometimes produce false signals, especially in choppy or ranging markets. * Subjectivity: While the script aims for objectivity, some settings (like weightings and extreme values) still involve a degree of subjective judgment.
Индикатор Pine Script®
от AzamSaja
2
CVD OscillatorCVD Delta Oscillator A momentum oscillator that measures buying and selling pressure through volume analysis, based on the principle that volume precedes price (cause and effect). How It Works Volume Analysis Measures the force of buying and selling by analyzing how volume interacts with price movement within each bar When price closes higher in a bar's range with strong volume, this indicates stronger buying pressure When price closes lower in a bar's range with strong volume, this indicates stronger selling pressure Momentum Measurement Uses two EMAs (fast and slow) to smooth the volume delta The difference between these EMAs creates an oscillator that shows: Rising values = Buying pressure increasing Falling values = Selling pressure increasing Zero line crossovers = Potential shift in control between buyers and sellers Signal Generation Divergences Bullish: Price falls to new lows while buying pressure increases (potential reversal up) Bearish: Price rises to new highs while selling pressure increases (potential reversal down) Zero-Line Crossovers Bullish: Buying pressure overtakes selling pressure Bearish: Selling pressure overtakes buying pressure Practical Application Reading the Indicator Green columns above zero = Net buying pressure Red columns below zero = Net selling pressure Larger columns = Stronger pressure Divergences and crossovers = Potential turning points Trading Context Helps identify when price movement has strong or weak volume support Shows potential exhaustion points through divergences Confirms trend changes through zero-line crossovers Customization Adjustable EMA periods for different trading styles Toggle-able visual signals Automatic alerts for all signals
Индикатор Pine Script®
от mindyourbuisness
3
MultiLayer Awesome Oscillator Saucer Strategy [Skyrexio]Overview MultiLayer Awesome Oscillator Saucer Strategy leverages the combination of Awesome Oscillator (AO), Williams Alligator, Williams Fractals and Exponential Moving Average (EMA) to obtain the high probability long setups. Moreover, strategy uses multi trades system, adding funds to long position if it considered that current trend has likely became stronger. Awesome Oscillator is used for creating signals, while Alligator and Fractal are used in conjunction as an approximation of short-term trend to filter them. At the same time EMA (default EMA's period = 100) is used as high probability long-term trend filter to open long trades only if it considers current price action as an uptrend. More information in "Methodology" and "Justification of Methodology" paragraphs. The strategy opens only long trades. Unique Features No fixed stop-loss and take profit: Instead of fixed stop-loss level strategy utilizes technical condition obtained by Fractals and Alligator to identify when current uptrend is likely to be over (more information in "Methodology" and "Justification of Methodology" paragraphs) Configurable Trading Periods: Users can tailor the strategy to specific market windows, adapting to different market conditions. Multilayer trades opening system: strategy uses only 10% of capital in every trade and open up to 5 trades at the same time if script consider current trend as strong one. Short and long term trend trade filters: strategy uses EMA as high probability long-term trend filter and Alligator and Fractal combination as a short-term one. Methodology The strategy opens long trade when the following price met the conditions: 1. Price closed above EMA (by default, period = 100). Crossover is not obligatory. 2. Combination of Alligator and Williams Fractals shall consider current trend as an upward (all details in "Justification of Methodology" paragraph) 3. Awesome Oscillator shall create the "Saucer" long signal (all details in "Justification of Methodology" paragraph). Buy stop order is placed one tick above the candle's high of last created "Saucer signal". 4. If price reaches the order price, long position is opened with 10% of capital. 5. If currently we have opened position and price creates and hit the order price of another one "Saucer" signal another one long position will be added to the previous with another one 10% of capital. Strategy allows to open up to 5 long trades simultaneously. 6. If combination of Alligator and Williams Fractals shall consider current trend has been changed from up to downtrend, all long trades will be closed, no matter how many trades has been opened. Script also has additional visuals. If second long trade has been opened simultaneously the Alligator's teeth line is plotted with the green color. Also for every trade in a row from 2 to 5 the label "Buy More" is also plotted just below the teeth line. With every next simultaneously opened trade the green color of the space between teeth and price became less transparent. Strategy settings In the inputs window user can setup strategy setting: EMA Length (by default = 100, period of EMA, used for long-term trend filtering EMA calculation). User can choose the optimal parameters during backtesting on certain price chart. Justification of Methodology Let's go through all concepts used in this strategy to understand how they works together. Let's start from the easies one, the EMA. Let's briefly explain what is EMA. The Exponential Moving Average (EMA) is a type of moving average that gives more weight to recent prices, making it more responsive to current price changes compared to the Simple Moving Average (SMA). It is commonly used in technical analysis to identify trends and generate buy or sell signals. It can be calculated with the following steps: 1.Calculate the Smoothing Multiplier: Multiplier = 2 / (n + 1), Where n is the number of periods. 2. EMA Calculation EMA = (Current Price) × Multiplier + (Previous EMA) × (1 − Multiplier) In this strategy uses EMA an initial long term trend filter. It allows to open long trades only if price close above EMA (by default 50 period). It increases the probability of taking long trades only in the direction of the trend. Let's go to the next, short-term trend filter which consists of Alligator and Fractals. Let's briefly explain what do these indicators means. The Williams Alligator, developed by Bill Williams, is a technical indicator designed to spot trends and potential market reversals. It uses three smoothed moving averages, referred to as the jaw, teeth, and lips: Jaw (Blue Line): The slowest of the three, based on a 13-period smoothed moving average shifted 8 bars ahead. Teeth (Red Line): The medium-speed line, derived from an 8-period smoothed moving average shifted 5 bars forward. Lips (Green Line): The fastest line, calculated using a 5-period smoothed moving average shifted 3 bars forward. When these lines diverge and are properly aligned, the "alligator" is considered "awake," signaling a strong trend. Conversely, when the lines overlap or intertwine, the "alligator" is "asleep," indicating a range-bound or sideways market. This indicator assists traders in identifying when to act on or avoid trades. The Williams Fractals, another tool introduced by Bill Williams, are used to pinpoint potential reversal points on a price chart. A fractal forms when there are at least five consecutive bars, with the middle bar displaying the highest high (for an up fractal) or the lowest low (for a down fractal), relative to the two bars on either side. Key Points: Up Fractal: Occurs when the middle bar has a higher high than the two preceding and two following bars, suggesting a potential downward reversal. Down Fractal: Happens when the middle bar shows a lower low than the surrounding two bars, hinting at a possible upward reversal. Traders often combine fractals with other indicators to confirm trends or reversals, improving the accuracy of trading decisions. How we use their combination in this strategy? Let’s consider an uptrend example. A breakout above an up fractal can be interpreted as a bullish signal, indicating a high likelihood that an uptrend is beginning. Here's the reasoning: an up fractal represents a potential shift in market behavior. When the fractal forms, it reflects a pullback caused by traders selling, creating a temporary high. However, if the price manages to return to that fractal’s high and break through it, it suggests the market has "changed its mind" and a bullish trend is likely emerging. The moment of the breakout marks the potential transition to an uptrend. It’s crucial to note that this breakout must occur above the Alligator's teeth line. If it happens below, the breakout isn’t valid, and the downtrend may still persist. The same logic applies inversely for down fractals in a downtrend scenario. So, if last up fractal breakout was higher, than Alligator's teeth and it happened after last down fractal breakdown below teeth, algorithm considered current trend as an uptrend. During this uptrend long trades can be opened if signal was flashed. If during the uptrend price breaks down the down fractal below teeth line, strategy considered that uptrend is finished with the high probability and strategy closes all current long trades. This combination is used as a short term trend filter increasing the probability of opening profitable long trades in addition to EMA filter, described above. Now let's talk about Awesome Oscillator's "Sauser" signals. Briefly explain what is the Awesome Oscillator. The Awesome Oscillator (AO), created by Bill Williams, is a momentum-based indicator that evaluates market momentum by comparing recent price activity to a broader historical context. It assists traders in identifying potential trend reversals and gauging trend strength. AO = SMA5(Median Price) − SMA34(Median Price) where: Median Price = (High + Low) / 2 SMA5 = 5-period Simple Moving Average of the Median Price SMA 34 = 34-period Simple Moving Average of the Median Price Now we know what is AO, but what is the "Saucer" signal? This concept was introduced by Bill Williams, let's briefly explain it and how it's used by this strategy. Initially, this type of signal is a combination of the following AO bars: we need 3 bars in a row, the first one shall be higher than the second, the third bar also shall be higher, than second. All three bars shall be above the zero line of AO. The price bar, which corresponds to third "saucer's" bar is our signal bar. Strategy places buy stop order one tick above the price bar which corresponds to signal bar. After that we can have the following scenarios. Price hit the order on the next candle in this case strategy opened long with this price. Price doesn't hit the order price, the next candle set lower low. If current AO bar is increasing buy stop order changes by the script to the high of this new bar plus one tick. This procedure repeats until price finally hit buy order or current AO bar become decreasing. In the second case buy order cancelled and strategy wait for the next "Saucer" signal. If long trades has been opened strategy use all the next signals until number of trades doesn't exceed 5. All trades are closed when the trend changes to downtrend according to combination of Alligator and Fractals described above. Why we use "Saucer" signals? If AO above the zero line there is a high probability that price now is in uptrend if we take into account our two trend filters. When we see the decreasing bars on AO and it's above zero it's likely can be considered as a pullback on the uptrend. When we see the stop of AO decreasing and the first increasing bar has been printed there is a high probability that this local pull back is finished and strategy open long trade in the likely direction of a main trend. Why strategy use only 10% per signal? Sometimes we can see the false signals which appears on sideways. Not risking that much script use only 10% per signal. If the first long trade has been open and price continue going up and our trend approximation by Alligator and Fractals is uptrend, strategy add another one 10% of capital to every next saucer signal while number of active trades no more than 5. This capital allocation allows to take part in long trades when current uptrend is likely to be strong and use only 10% of capital when there is a high probability of sideways. Backtest Results Operating window: Date range of backtests is 2023.01.01 - 2024.11.25. It is chosen to let the strategy to close all opened positions. Commission and Slippage: Includes a standard Binance commission of 0.1% and accounts for possible slippage over 5 ticks. Initial capital: 10000 USDT Percent of capital used in every trade: 10% Maximum Single Position Loss: -5.10% Maximum Single Profit: +22.80% Net Profit: +2838.58 USDT (+28.39%) Total Trades: 107 (42.99% win rate) Profit Factor: 3.364 Maximum Accumulated Loss: 373.43 USDT (-2.98%) Average Profit per Trade: 26.53 USDT (+2.40%) Average Trade Duration: 78 hours These results are obtained with realistic parameters representing trading conditions observed at major exchanges such as Binance and with realistic trading portfolio usage parameters. How to Use Add the script to favorites for easy access. Apply to the desired timeframe and chart (optimal performance observed on 3h BTC/USDT). Configure settings using the dropdown choice list in the built-in menu. Set up alerts to automate strategy positions through web hook with the text: {{strategy.order.alert_message}} Disclaimer: Educational and informational tool reflecting Skyrex commitment to informed trading. Past performance does not guarantee future results. Test strategies in a simulated environment before live implementation
Стратегия Pine Script®
от Skyrexio
1
Awesome Oscillator with DivergenceSimple Awesome Oscillator with Divergences This TradingView script combines the classic Awesome Oscillator (AO) with divergence detection. It plots AO as a histogram, highlighting changes in momentum. Divergences are identified based on pivot highs and lows, signaling potential trend reversals: - Bullish Divergence: Price makes lower lows, AO makes higher lows. - Bearish Divergence: Price makes higher highs, AO makes lower highs. Visual signals (arrows) and alerts ensure clear identification, making it ideal for traders focusing on momentum and trend reversals.
Индикатор Pine Script®
от Raffaele_De_Leo
2
Divergence Indicator Multi [TradingFinder] MACD AO RSI DIV Chart🔵 Introduction 🟣 What is Divergence in Financial Markets? Divergence in technical analysis happens when the price of a stock moves in a direction opposite to certain indicators. This is a crucial concept in financial markets as it can signal either a trend reversal or a continuation of the current correction in the trend. Understanding divergence helps traders and analysts make more informed decisions. 🟣 Positive Regular Divergence (RD+) A positive regular divergence occurs at the end of a downtrend, where two price lows form. This divergence appears when the price chart shows a new low, but the indicator does not follow, signaling potential buying opportunities. Positive divergence indicates increased buying pressure and reduced selling pressure, making it a useful signal for forecasting price increases. 🟣 Negative Regular Divergence (RD-) A negative regular divergence is seen during an uptrend when two price highs form. The price chart records a new high, but the indicator does not reflect this change, suggesting that a market downturn is likely. This type of divergence shows strong selling pressure and weaker buying activity, which can help identify selling opportunities. Both positive and negative divergences are powerful tools for identifying potential trend reversals and key support and resistance levels. For example, when an indicator trends upward while the price moves downward, this creates divergence, warning traders to reconsider their investment strategy. 🟣 Different Types of Divergence in Trading 1. Regular Divergence : o Positive Regular Divergence (RD+) o Negative Regular Divergence (RD-) 2. Hidden Divergence : o Positive Hidden Divergence (HD+) o Negative Hidden Divergence (HD-) 3.Time Divergence. Note : This guide focuses specifically on Regular Divergence. 🟣 What is Regular Divergence? Regular Divergence, often referred to as convergence, occurs when price action and indicators show conflicting patterns, usually signaling the end of a trend. Detecting regular divergence helps traders anticipate potential trend reversals or the formation of reversal patterns. 🔵 How to Use To optimize the detection of divergence, you can adjust the Fractal Period to specify the length of time for identifying divergence patterns. Additionally, with the Divergence Detection Method, you can select oscillators like the MACD, RSI, or AO to base divergence detection on. Divergence in MACD : MACD divergence occurs when the price chart forms an opposite pattern compared to the MACD line, indicating a potential price reversal. Divergence in RSI : In a downtrend, if the price chart forms two consecutive lows with the second lower than the first, but the RSI shows two lows with the second higher, this indicates positive regular divergence, which is a buy signal. On the other hand, during an uptrend, if the price forms two highs with the second higher than the first, but the RSI shows the second high lower, this points to negative regular divergence, indicating a sell signal. Divergence in AO (Awesome Oscillator) : The AO indicator calculates histograms using the difference between 5-period and 34-period simple moving averages. It compares peaks and troughs of these histograms with price movements, detecting divergence and plotting lines and arrows to signal divergence. 🔵 Table The following table breaks down the main features of the oscillator. It covers four critical categories: Exist, Consecutive, Divergence Quality, and Change Phase Indicator. Exist : If divergence is detected, a "+" will appear in this row. Consecutive: Shows the number of consecutive divergences that have formed in a short period. Divergence Quality : Evaluates the quality of the divergence based on the number of occurrences. One is labeled "Normal," two are "Good," and three or more are considered "Strong." Change Phase Indicator : If a phase change is detected between two oscillation peaks, this is marked in the table.
Индикатор Pine Script®
от TFlab
4