ICT Gap Retest Strategy [Custom Exits]Gap Retest Strategy with customizable exit conditions and two adjustable trade windows. Enters on the candle following a retest and exit of the NDOG/NWOG. Written with Gemini.
Графические паттерны
Daily Bias Panel (with MTF Toggle)Daily Bias Panel Documentation
Overview
The Daily Bias Panel is a TradingView indicator designed to provide a structured, multi factor assessment of market direction for intraday and swing traders. It consolidates several key bias components—Prior Day levels, VWAP, Overnight High/Low, Multi Timeframe Market Structure, and an Overall Bias—into a clean, compact table. A confidence meter summarizes the combined strength of all signals.
This document explains each line item, the rules behind it, and how to interpret the panel.
1. Prior Day Bias
Definition
Compares the current price to the previous day’s high and low.
Rules
• Bullish (1): Close > Prior Day High
• Bearish (-1): Close < Prior Day Low
• Neutral (0): Price is between the prior high and low
Interpretation
This bias reflects whether the market is breaking out above or below the previous day’s range. It is a foundational directional signal.
2. VWAP Bias
Definition
Measures whether price is trading above or below the Volume Weighted Average Price.
Rules
• Bullish (1): Close > VWAP
• Bearish (-1): Close < VWAP
• Neutral (0): Price is at VWAP
Interpretation
VWAP is a widely used institutional benchmark. Trading above VWAP suggests buyers are in control; below VWAP suggests sellers dominate.
3. ONH / ONL Bias (Overnight High / Low)
Definition
Tracks the overnight session’s high and low (18:00–09:30 ET) and compares current price to those levels.
Rules
• Bullish (1): Close > Overnight High
• Bearish (-1): Close < Overnight Low
• Neutral (0): Price is inside the overnight range
Interpretation
ONH/ONL is extremely important for index futures (ES/NQ). Breaking ONH/ONL often signals strong directional intent at the RTH open.
4. Struct MTF (Market Structure Bias)
Definition
A weighted blend of market structure trends across multiple timeframes.
Modes
Swing Mode
• 4H (50%)
• 1H (30%)
• 15M (20%)
Intraday Mode
• 1H (40%)
• 15M (35%)
• 5M (25%)
Rules
Each timeframe is classified as:
• Bullish (1): Higher High + Higher Low
• Bearish (-1): Lower High + Lower Low
• Neutral (0): No clear structure
The weighted average produces a final structure score.
Interpretation
This is your trend engine. It smooths noise and provides a stable directional backbone.
5. Overall Bias
Definition
A strict agreement filter between Prior Day Bias and VWAP Bias.
Rules
• Bullish (1): Both Prior Day and VWAP are bullish
• Bearish (-1): Both are bearish
• Neutral (0): Any disagreement
Interpretation
This prevents false positives by requiring alignment between two major bias components.
6. Confidence Score
Definition
A weighted blend of all bias components:
• Prior Day (25%)
• VWAP (25%)
• ONH/ONL (20%)
• MTF Structure (30%)
Output
A normalized score between -1.00 and +1.00.
Interpretation
• +1.00: Strong bullish alignment across all systems
• -1.00: Strong bearish alignment
• 0.00: Mixed or unclear conditions
7. Confidence Meter (10 Square Visual)
Definition
A visual representation of the confidence score.
Rules
• 0–10 squares filled based on absolute confidence
• Color reflects direction (green/red/yellow)
Interpretation
A quick glance gauge of trend strength.
8. Debug Mode (Optional)
Purpose
Displays all underlying levels and bias markers directly on the chart.
Includes
• Prior High / Low
• VWAP
• ONH / ONL
• Confidence Score line
• Bias markers (P, V, O, M)
Use Case
Great for verifying logic, backtesting visually, and understanding how each component behaves.
9. Panel Layout & Spacing
Top Left Spacer System
When the panel is placed in the top left corner, a 3 row spacer pushes it below the chart header and indicator dropdown.
Panel Size Options
• Small
• Medium
• Large
These adjust font sizes and meter padding.
______________________________________________________________________________
Summary
The Daily Bias Panel is a compact, multi factor decision tool that blends:
• Prior Day context
• VWAP positioning
• Overnight session dynamics
• Multi timeframe trend structure
• A strict overall bias filter
• A confidence scoring engine
Together, these components give traders a clear, structured view of market direction and strength.
This documentation should serve as a complete reference for understanding, using, and publishing the indicator.
EMA RSI Premium CleanEMA + RSI • Premium Clean is a minimalist trend-following and momentum confirmation tool designed for traders who prefer clarity over clutter.
This indicator combines:
Exponential Moving Averages (EMA) to define the dominant market trend
Relative Strength Index (RSI) to time pullbacks and momentum exhaustion
The goal is not to predict the market, but to trade in harmony with the trend and avoid low-probability entries.
🔍 How It Works
🔹 Trend Identification (EMA)
The Fast EMA reacts quickly to price changes
The Slow EMA represents the broader trend
When the fast EMA is above the slow EMA, bullish market bias is present
When the fast EMA is below the slow EMA, bearish market bias is present
🔹 Entry Context (RSI)
RSI helps identify healthy pullbacks within a trend
In bullish trends, RSI pullbacks indicate potential continuation zones
In bearish trends, RSI rebounds highlight possible continuation to the downside
Signals appear only when trend and momentum align, reducing random trades.
🎯 Best Use Case
Trend-following strategies
Pullback entries
Avoiding counter-trend trades
Intraday & swing trading
⏱ Recommended Markets & Timeframes
Markets: Gold (XAUUSD), Forex, Crypto
Timeframes: M15, M30, H1, H4
⚠️ Important Notes
This indicator does not repaint
Signals are context-based, not guaranteed trades
Best results are achieved when combined with:
Market structure
Support & resistance
Proper risk management
✨ Visual Design
Clean and modern color palette
Minimal arrows to avoid chart clutter
RSI displayed separately for clear momentum analysis
Optimized for both dark and light chart themes
🧠 Trading Philosophy
Trade the trend.
Use momentum for timing.
Keep the chart clean.
Intraday Session BehaviorThis indicator was built to study how price behaves throughout the trading day, from pre-London session to the New York close.
The goal was simple: identify recurring intraday tendencies, reversals, and consolidation phases based on time, not indicators.
I created this script to visually segment key intraday windows and then ran 100 manual backtests to observe where price most frequently shifts direction or changes behavior.
Key observation:
Across multiple samples, 8:00 AM NY time showed the highest frequency of reversals, often aligning with positioning ahead of the New York open.
This tool is not a signal generator. It’s designed for context, study, and confluence — especially for traders focused on session-based trading, liquidity behavior, and intraday structure.
Use it as a framework to:
Study session transitions
Refine time-based playbooks
Combine with your own strategy, structure, and risk management
Built the old-school way: observe, test, repeat.
covenant 1Covenant 1 — Liquidity-Based Trade Boxes
Covenant 1 is a private trading indicator designed to visualize Entry, Stop Loss, and Take Profit zones directly on the chart.
Key features
• Automatic Entry / SL / TP boxes
• Boxes dynamically extend as the trade remains active
• Full historical trade visualization
• Clean, non-repainting logic
• Designed for discretionary trading and visual guidance
Notes
• This indicator is for educational and analytical purposes only
• It does not execute trades
• No financial advice is provided
ALT FINAL ABCD PRO V62. Key Improvements and Performance Optimization of Version v6
Faster Large-Scale Computation: The v6 engine processes large-scale computations more quickly and minimizes delays that occur when pulling Bitcoin and dominance data simultaneously.
Enhanced Repainting: By using the f_secure_data function to check Bitcoin trends, I eliminated 'future reference errors' at the source, ensuring that backtest returns match actual trading results.
Automation of Risk-Reward (R:R): Utilizing ATR multiples, I configured the stop loss to be short (0.8x) and the take profit to be long (1.5x), allowing for automatic responses to the volatility of altcoins.
3. Supplementary Guide for Trading Altcoins
Meaning of VWAP Sweep: In the crypto market, when the price briefly dips below the VWAP and then recovers, it is interpreted as a signal that institutions are absorbing the stop-loss volumes of retail investors. This indicator captures that moment and helps traders enter at the most favorable price level.
Utilizing the Dominance Filter: An altcoin buying signal occurs only when Bitcoin's dominance is below the moving average. This mechanism ensures trading only in 'tailwind' situations where the flow of funds is directed towards altcoins.
Time Zone Focus: The U.S. session (22:30–01:30), marked in orange, is when global liquidity is at its highest. Outside of this time frame, the reliability of patterns decreases, so it is recommended to refrain from trading as much as possible.
Neeson RSI Divergence DetectorIntegrating Multi-Indicator Strategies: A Rational Approach to Technical Analysis Tools
Introduction
The integration of multiple technical indicators into a unified trading script represents a sophisticated approach to market analysis, combining complementary analytical methods to enhance decision-making. This article outlines the rational basis for combining specific indicators, explains their synergistic operation, and provides practical guidance for users seeking to understand the functional utility, operational mechanics, and unique value proposition of integrated technical analysis tools.
Functional Purpose and Rational Integration Basis
Integrated technical scripts are designed to address the inherent limitations of single-indicator analysis by combining multiple analytical perspectives. The rational basis for integration typically follows these principles:
Complementary Signal Validation: Different indicators measure distinct market characteristics (momentum, volatility, trend strength, etc.). Their combination allows cross-validation of signals, reducing false positives inherent in single-indicator systems.
Multi-Timeframe Confirmation: Integrated scripts often incorporate elements that analyze price action across different temporal dimensions, providing a more comprehensive market perspective.
Risk Management Enhancement: By combining overbought/oversold indicators with trend confirmation tools, these scripts help identify not only entry opportunities but also potential risk zones.
Market Phase Adaptation: Different market conditions (trending, ranging, volatile) favor different indicator types. Integrated approaches maintain relevance across varying market environments.
Synergistic Operational Mechanism
The components of well-designed integrated scripts operate through several synergistic mechanisms:
Primary Trend Identification: Core trend-following indicators establish the dominant market direction, serving as a filter for other signals. This prevents counter-trend entries that might otherwise be generated by oscillators or momentum indicators.
Momentum Confirmation: Oscillator-based components (like RSI or Stochastic) validate the strength of the identified trend, distinguishing between healthy retracements and potential reversals.
Divergence Detection: By comparing price action with momentum indicators, these scripts identify subtle shifts in market dynamics that often precede trend changes.
Volatility Adjustment: Volatility-based components dynamically adjust signal thresholds and position sizing recommendations based on current market conditions.
Multi-Layer Filtering: Each signal passes through successive validation layers, with only the strongest, most confirmed signals triggering alerts or visual markers.
Practical Application Guidance
Users can maximize the utility of integrated scripts through these practical approaches:
Parameter Customization: Adjust indicator periods and thresholds to match the characteristics of specific trading instruments and timeframes. Historical testing can identify optimal settings for particular markets.
Signal Hierarchy Interpretation: Learn to distinguish between primary signals (strongly confirmed across multiple indicators) and secondary signals (weaker confirmation) for appropriate position sizing.
Contextual Analysis: Consider integrated signals within the broader market context, including support/resistance levels, volume patterns, and fundamental developments.
Performance Correlation: Monitor how different market conditions affect script performance. Some configurations may excel in trending markets while others perform better in ranging conditions.
Risk Calibration: Use the multi-indicator confirmation to calibrate stop-loss and take-profit levels, with tighter parameters for strongly confirmed signals and wider parameters for weaker ones.
Originality and Value Proposition
The originality of well-designed integrated scripts manifests in several dimensions:
Unique Combination Logic: The specific selection and weighting of indicators, along with their integration methodology, represents intellectual value distinct from simple indicator stacking.
Innovative Signal Processing: Advanced scripts often incorporate proprietary algorithms for signal filtering, noise reduction, or probability weighting not found in standard indicators.
Adaptive Framework: Some scripts dynamically adjust their analytical approach based on changing market conditions, representing a form of artificial market intelligence.
Visualization Innovation: The presentation of complex multi-indicator data in an intuitive, actionable format constitutes significant user interface originality.
Empirical Limitations and Responsible Use
It is crucial to maintain realistic expectations regarding integrated technical scripts:
No Predictive Certainty: These tools analyze probabilities, not certainties. No combination of historical price indicators can guarantee future price movements.
Market Efficiency Limitations: All technical analysis operates within the constraints of market efficiency, with script effectiveness varying across different market conditions and time periods.
Complementary Role: Integrated scripts should complement, not replace, comprehensive trading strategies including risk management, fundamental analysis, and market knowledge.
Continuous Evaluation: Regular performance assessment against established benchmarks helps maintain realistic expectations and identifies when script adjustments may be necessary.
Conclusion
The thoughtful integration of multiple technical indicators represents a logical evolution in analytical methodology, addressing the limitations of single-indicator approaches through complementary validation and multi-dimensional analysis. By understanding the rational basis for integration, the synergistic operation of components, and the practical application parameters, users can employ these tools as valuable components within broader, disciplined trading approaches. The true value emerges not from predictive accuracy but from structured decision support that helps traders navigate complex market environments with greater consistency and insight.
Absorption Call@subitrades Rough absorption indicator from volume + candle range, with breakout indication.
Bitcoin Macro Trend IndicatorBitcoin Macro Trend Indicator: A Multi-Timeframe Confirmation System for Strategic Positioning
Introduction
The Bitcoin Macro Trend Indicator is a comprehensive technical analysis tool designed for cryptocurrency traders and investors seeking to navigate Bitcoin's volatile cycles. It integrates multiple exponential moving averages (EMAs) and MACD variations into a unified system that identifies long-term accumulation zones, bull market tops, and strategic re-entry points. This document outlines the logical foundation of this integration, explains the synergistic operation of its components, and provides practical guidance for its application.
Rationale for Multi-Indicator Integration
Bitcoin's market behavior exhibits distinct cyclical patterns characterized by extended accumulation periods, parabolic advances, and sharp corrections. Single indicators often generate false signals during volatile conditions. This system employs a layered confirmation approach where:
Ultra-long-term EMAs establish the primary trend context
Medium-term EMA crossovers identify trend transitions
Multiple MACD configurations detect momentum shifts across different time horizons
This multi-timeframe methodology reduces noise and increases signal reliability by requiring convergence across independent but complementary technical elements.
Component Synergy and Operational Mechanism
1. EMA Framework: The Trend Foundation
700-period EMA: Serves as the primary trend baseline. Prices below this line suggest long-term undervaluation (accumulation territory), while sustained positions above indicate established bull markets.
18/63-period EMA Pair: Functions as the core trend transition system. The golden cross (18 above 63) confirms bullish momentum, while the death cross signals potential trend exhaustion.
12/52-period EMA Pair: Specialized for identifying renewed momentum after corrections within ongoing trends, reducing premature re-entry during false recoveries.
12-period EMA (Auxiliary): Provides early warning of short-term trend deterioration that may precede larger corrections.
2. MACD Ensemble: Momentum Verification
Bottom MACD (168/364/6): With exceptionally slow parameters, this configuration filters out short-term noise to identify genuine long-term momentum shifts characteristic of market bottoms.
Top MACD (63/133/1): Optimized for detecting momentum divergence at potential market tops, where traditional MACD settings often lag.
Local Top Warning MACD (30/65/4): Balanced to capture intermediate-term momentum deterioration that frequently precedes significant pullbacks.
Early Bull MACD (9/19/6): Sensitive to initial momentum surges following accumulation periods, providing early confirmation of trend initiation.
3. Signal Hierarchy and Progressive Confirmation
The indicator employs a cascading confirmation logic:
Stage 1 (Accumulation): Requires both long-term MACD improvement AND price position below the 700-period EMA. Strong accumulation signals add Early Bull MACD confirmation.
Stage 2 (Warning): Local top warnings activate only when multiple conditions align: medium-term trend remains bullish, ultra-long-term trend confirms strength, AND specialized MACDs show momentum deterioration.
Stage 3 (Re-entry): Requires both EMA crossover confirmation AND momentum recovery in the warning MACD, reducing false continuation signals.
Stage 4 (Top Confirmation): The most stringent criteria, demanding convergence across long-term, medium-term, and momentum indicators before signaling major trend reversal.
Practical Application and Interpretation
Signal Classification System
Accumulation Zones (Green): Areas where long-term indicators suggest undervaluation. These represent strategic buying opportunities for patient investors.
Strong Accumulation Signals (Dark Green): Enhanced accumulation zones with additional momentum confirmation, suggesting higher-probability entry points.
Local Top Warnings (Orange/Red): Progressive warnings of increasing risk, with red zones indicating conditions historically associated with more severe corrections.
Re-entry Opportunities (Blue): Post-correction zones where momentum recovery aligns with trend resumption signals.
Bull Market Termination (Purple): Signals suggesting completion of major advance cycles, prompting defensive positioning.
Top Confirmation (Dark Red): High-confidence reversal signals with multi-timeframe confirmation.
Usage Guidelines
Timeframe Recommendation: Designed primarily for daily and weekly charts where macroeconomic trends are most evident.
Position Sizing: Accumulation signals support gradual position building, while warning signals suggest reducing exposure rather than immediate liquidation.
Corroboration: Although self-contained, the indicator performs best when combined with volume analysis and fundamental considerations.
Historical Validation: Users should review signal performance across multiple market cycles to understand characteristic behaviors.
Limitations and Considerations
No technical indicator predicts market movements with absolute certainty. This tool provides probabilistic assessments based on historical patterns.
Extraordinary market events or fundamental shifts may override technical signals.
The indicator's parameters, while optimized for Bitcoin's historical behavior, may require adjustment for unprecedented market conditions.
Signals should be interpreted in context of overall market structure and trader/investor time horizon.
Originality and Differentiation
This system represents a novel synthesis of established technical concepts through:
Parameter Optimization: Specific EMA and MACD periods calibrated to Bitcoin's characteristic volatility and cycle duration.
Conditional Layering: Unlike single-criterion systems, signals require convergence across independent technical dimensions.
Progressive Warning System: Multi-stage alerts that distinguish between routine corrections and potential trend reversals.
Macro-Micro Integration: Simultaneous analysis of ultra-long-term trends and short-term momentum shifts.
Empirical Foundation
The indicator's design incorporates observations from Bitcoin's market behavior since 2010, particularly:
The tendency for major bottoms to form during extended periods below long-term moving averages
Characteristic momentum patterns preceding significant tops
The predictive value of specific EMA relationships during different market phases
Historical performance of multi-timeframe confirmation versus single indicators
Conclusion
The Bitcoin Macro Trend Indicator provides a structured framework for identifying high-probability turning points in Bitcoin's market cycles. By integrating multiple technical perspectives into a confirmation hierarchy, it reduces reaction to market noise while maintaining sensitivity to genuine trend changes. Users should employ this tool as part of a comprehensive trading plan that includes risk management protocols and consideration of external market factors. The system's greatest utility emerges when understood not as a predictive oracle but as a systematic method for identifying favorable risk-reward scenarios based on multi-timeframe technical convergence.
bitcoin Multi-Timeframe Trend Analysis Toolbitcoin Multi-Timeframe Trend Analysis Tool: A Comprehensive Guide for Market Cycle Identification
Introduction
The Multi-Timeframe Trend Analysis Tool is a sophisticated technical indicator designed to help traders identify critical market phases across different time horizons. This tool synthesizes multiple established technical analysis concepts into a unified framework, specifically optimized for high-volatility markets such as cryptocurrencies and alternative coins (altcoins). By integrating trend-following, momentum, and mean-reversion principles, it provides visual cues for strategic entry and exit points throughout market cycles.
Core Philosophy and Integration Rationale
The indicator's design philosophy centers on the principle that different market phases require different analytical approaches. Rather than relying on a single indicator, which often produces false signals during complex market conditions, this tool combines multiple technical components that complement each other's strengths and compensate for individual weaknesses.
The integration follows a logical hierarchy:
Trend Identification through multiple EMA periods establishes the market's primary direction
Momentum Confirmation via multiple MACD configurations validates trend strength and potential reversals
Multi-timeframe Alignment ensures signals are significant across both short-term and long-term perspectives
This layered approach reduces the likelihood of whipsaws and increases the statistical significance of generated signals.
Component Synergy and Operational Mechanics
1. EMA System: The Trend Foundation
The tool employs six Exponential Moving Averages organized into two groups:
Long-term EMA Group (200, 300, 700 periods):
The 200-period EMA serves as the primary trend baseline
The 300-period EMA provides confirmation of the longer-term direction
The 700-period EMA represents the "macro trend" and helps identify major cycle shifts
Medium-term EMA Group (18, 36, 63 periods):
These shorter EMAs capture intermediate trend dynamics
The relationship between these EMAs helps identify acceleration or deceleration in trend momentum
The EMA system works by comparing relationships between different period lengths. For instance, when shorter EMAs are positioned below longer EMAs, it confirms a bearish trend structure, while the opposite configuration suggests bullish momentum.
2. Multi-Period MACD System: Momentum and Divergence Detection
The tool implements three separate MACD configurations, each serving a distinct purpose:
Bottom MACD (168/364/6 periods):
Designed to capture long-term momentum shifts at potential market bottoms
The extended periods (168 and 364) filter out short-term noise while highlighting significant trend changes
Particularly effective at identifying oversold conditions during prolonged downtrends
Top MACD (108/234/9 periods):
Optimized for detecting momentum deterioration at potential market tops
The period selection is based on historical analysis of bull market cycles
Helps identify when bullish momentum is weakening before price action clearly reverses
Local Top MACD (9/36/9 periods):
Functions as an early warning system for short-term corrections
Particularly useful for swing traders and risk management
Can help identify profit-taking opportunities during ongoing trends
The three MACDs operate independently but collectively provide a comprehensive view of momentum across different time horizons. When multiple MACDs simultaneously show confirming signals, the reliability of the indication increases significantly.
3. Signal Generation Logic: Conditional Framework
Signals are generated only when multiple conditions align across different components:
Accumulation Zone Conditions:
Requires both trend alignment (200 EMA below 300 EMA) AND either:
Price trading at a significant discount to the 200 EMA (suggesting oversold conditions), OR
The 200 EMA itself declining sharply (confirming bearish momentum exhaustion)
This dual requirement prevents false accumulation signals during healthy downtrends
Strong Buy Zone Conditions:
Includes all accumulation zone requirements PLUS:
Sharp decline in the 36-period EMA (suggesting panic or capitulation)
Accelerated decline in the 200 EMA (confirming bearish exhaustion)
This represents a higher-conviction signal with multiple confirming factors
Potential Bull Market Top Conditions:
Requires the 700 EMA to be rising sharply (confirming extended bullish trend) AND
Top MACD showing bearish divergence (momentum weakening) AND
Short-term EMA alignment still bullish (indicating the top is forming amid strength)
This combination helps distinguish between minor corrections and major trend reversals
Local Top Warning Conditions:
Triggered when the 700 EMA shows accelerated gains (potential euphoria phase) AND
The Local Top MACD shows bearish momentum divergence
Serves as a risk management tool rather than a direct reversal signal
Practical Application and Usage Guidelines
For Long-Term Investors:
Monitor for "Accumulation Zone" signals during market downturns
Consider initiating or adding to positions during "Strong Buy Zone" signals
Use these signals for dollar-cost averaging strategies rather than timing exact bottoms
Hold through intermediate fluctuations unless "Potential Bull Market Top" signals appear
For Trend Traders:
Use EMA alignments to confirm trend direction before entering positions
Employ "Local Top Warnings" to secure profits on portions of positions
Watch for alignment between medium-term EMA direction and MACD signals for entry timing
Consider "Potential Bull Market Top" signals as reasons to reduce exposure or implement hedging strategies
For Risk Managers:
Use "Local Top Warnings" to tighten stop-losses or reduce position sizes
Monitor the relationship between price and the 200 EMA for overall market health assessment
Track multiple timeframes to distinguish between normal volatility and potential trend changes
Originality and Distinctive Features
This tool represents a novel synthesis of existing technical concepts rather than a completely new indicator. Its originality stems from:
Purpose-Specific MACD Configurations: Unlike standard MACD implementations, each of the three MACDs is optimized for a specific market condition, with period lengths derived from empirical analysis of market cycles.
Multi-Layered Confirmation Framework: Signals require alignment across trend, momentum, and rate-of-change dimensions, reducing false positives common in single-indicator systems.
Progressive Signal Hierarchy: The tool distinguishes between initial warning signals ("Local Top Warnings") and higher-conviction reversal signals ("Potential Bull Market Tops"), allowing for graduated responses.
Combination of Absolute and Relative Conditions: The logic incorporates both absolute price relationships (price vs. EMA levels) and rate-of-change metrics (EMA acceleration/deceleration), capturing both state and momentum information.
Limitations and Considerations
Lagging Nature: Like all trend-following indicators, this tool reacts to established conditions rather than predicting future movements. Early trend phases may not generate signals.
Parameter Sensitivity: The default parameters are optimized for daily cryptocurrency charts. Performance may vary across different asset classes or timeframes.
Complementary Analysis Required: This tool should be used alongside fundamental analysis, volume confirmation, and market structure considerations.
No Guarantee of Performance: Past success in identifying market phases does not ensure future accuracy. All trading involves risk, and no indicator provides certainty.
Conclusion
The Multi-Timeframe Trend Analysis Tool provides a structured approach to identifying significant market phases by integrating trend, momentum, and mean-reversion concepts across multiple time horizons. Its value lies not in predicting exact turning points but in identifying zones of increasing probability for trend changes, allowing traders to adjust their strategies accordingly. When used as part of a comprehensive trading plan with proper risk management, it can help traders navigate complex market environments with greater clarity and discipline.
The tool is particularly suited to the extended trends and pronounced cycles characteristic of cryptocurrency markets, though its principles apply across various financial instruments. As with all technical tools, its effectiveness increases with user understanding of both its mechanisms and its limitations.
Previous High & LowPrevious High & Low plots key reference levels from higher timeframes directly on your chart to help you spot liquidity targets, support/resistance, and reaction zones faster.
What it shows:
PDH / PDL (Previous Day High & Low): yesterday’s high and low, extended to the end of the current day (works on all timeframes, including low TF).
H-2 / H-3 (1H levels): the high/low from the previous-previous hour (H-2) and an optional extra set (H-3) for additional intraday context. These lines are limited up to the current candle.
H4-1 / H4-2 (4H levels): the high/low of the previous 4-hour candle (H4-1) and the previous-previous 4-hour candle (H4-2), also limited up to the current candle.
Customization:
Toggle each group on/off (PDH/PDL, H-2, H-3, H4-1, H4-2)
Fully style lines (color, width, solid/dashed/dotted)
Optional labels for each level
How to use:
Use these levels as “areas of interest” for breakouts, pullbacks, stop runs/liquidity sweeps, and mean-reversion reactions—especially around PDH/PDL and prior 4H/1H extremes.
Educational Market Structure & Trend Context🔍 Overview
This time-limited indicator is designed for educational and analytical purposes only. It helps users visually study price structure behavior and trend context by marking key structural points on the chart and overlaying a trend reference line. The indicator does not generate trading signals, predictions, or recommendations.
⚙️ How the Indicator Works
The script analyzes price action over a user-defined lookback period to identify local structural points:
Higher Highs within the selected range
Lower Lows within the selected range
These points are plotted as simple visual markers to help users understand how price is evolving over time.
In addition, a moving average is applied to provide broader trend context.
🟢 Green Markers (Structure Strength)
Appear when price forms a local higher high within the lookback window
Represent relative strength in price structure
They are not buy signals and do not indicate future movement
🔴 Red Markers (Structure Weakness)
Appear when price forms a local lower low within the lookback window
Represent relative weakness in price structure
They are not sell signals and do not indicate reversals
➖ Grey Line (Trend Context Line)
This line is a moving average calculated over a fixed period
It provides trend context only, helping users visually distinguish between upward and downward environments
It does not act as support, resistance, or entry guidance
🎨 Background Shading (Optional Context)
A subtle background color may appear depending on price position relative to the trend line
This shading is purely visual context, not a signal or confirmation
🎯 Purpose & Benefits
Helps users study market structure in a clean and simple way
Encourages price-action awareness instead of signal dependency
Supports manual analysis, learning, and chart reading skills
Keeps the chart minimal, non-predictive, and professional
⚠️ Important Notes
This indicator does not provide buy/sell signals
No targets, stop levels, or profit expectations are included
Past structure points do not predict future outcomes
Users should apply their own analysis and risk management
JKLInside Day Screener (Daily)Inside Day screener. I asked AI to code a PineScript that would act as a screener to find inside days. Works only on the daily timeframe.
Educational Trend Direction (Up & Down)🔍 Overview
This indicator is designed to visually represent trend direction and trend transitions using a simple moving-average relationship. It is built strictly for educational and analytical purposes, allowing users to observe how price behaves during upward and downward market phases without relying on trading signals or predictions.
The indicator focuses on trend context, not trade execution.
⚙️ How the Indicator Works
The script calculates two exponential moving averages:
A fast trend line that reacts quickly to recent price changes
A slow trend line that represents broader market direction
Trend direction is determined by the relative position of these two lines.
When the fast line moves above the slow line, the market is considered to be in an upward trend phase
When the fast line moves below the slow line, the market is considered to be in a downward trend phase
This relationship helps visualize trend shifts and momentum changes in a simple and intuitive way.
🎨 Visual Components Explained
🟢 Green Trend Line
Represents the fast moving average during upward trend phases
Indicates that price is maintaining strength relative to the broader trend
Color reflects trend direction only, not confirmation or entry
🔴 Red Trend Line
Represents the fast moving average during downward trend phases
Indicates sustained weakness relative to the broader trend
Color does not imply selling or future continuation
⚪ Grey Trend Line
Represents the slow moving average
Acts as a baseline trend reference
Helps distinguish between short-term fluctuations and broader direction
🎨 Background Shading
Light green shading appears during upward trend environments
Light red shading appears during downward trend environments
Background color provides context only and does not signal market actions
🎯 Purpose & Benefits
Helps identify trend phases in a clear and minimal way
Improves understanding of trend transitions and momentum shifts
Reduces visual noise compared to raw price data
Encourages context-based analysis instead of signal dependency
Suitable for all markets and timeframes
⚠️ Important Notes
This indicator does not generate buy or sell signals
No targets, stop levels, or performance metrics are included
Trend conditions are descriptive, not predictive
Past behavior does not guarantee future outcomes
Users should always apply their own analysis and risk management when interpreting market data.
📚 Intended Use
This tool is intended for:
Market trend study
Educational demonstrations
Visual analysis of trend direction
Long-term chart structure awareness
It is not intended for automated trading or decision-making.
EMA10/201️⃣ Trend filter is already TRUE
Price above VWAP
EMA10 > EMA20
EMA20 rising
➡ This stays TRUE for many candles in a strong uptrend.
2️⃣ Pullback condition is TRUE
1–3 red candles already happened
Price is still near EMA20
➡ This condition does not reset immediately.
3️⃣ Engulfing logic is the key problem
Your current engulfing rule is roughly:
Candle is green
Closes above previous close
Above EMA20
Now look at your chart:
First green candle → BUY
Next candle is also green, still above EMA20 → BUY again
Next candle still satisfies all conditions → BUY again
📌 Result:
👉 BUY, BUY, BUY on consecutive candles
That’s why you see 3 BUY labels together.
RMA vs EMA Comparison ToolIf you're looking for a quick entry point to follow a trend, it's best to look at the EMA.
If you need confirmation of a long-term trend change or are working with oscillators (like the RSI), use the RMA.
What to look for on the chart:
Reaction speed: You'll notice that the EMA (red line) adheres much more closely to the price. It reacts more quickly to sharp reversals or impulses.
Smoothness: The RMA (blue line) appears smoother and "lazier." It changes direction more slowly, which helps filter out false signals (noise), but allows for a slightly later entry into a trade.
Distance: During periods of strong trending, the RMA is usually further from the price than the EMA of the same period.
FVG Long Zones w/ Proper Logic + ConfluencesThis script identifies **bullish Fair Value Gaps (FVGs)** using a 3-candle imbalance (high two bars ago below the current low), marks them as potential long zones, and looks for a single long entry when price retraces into the gap. Entries are filtered by **trend (price above EMA-50)**, **momentum/mean reversion (RSI ≤ 50)**, and a **bullish candle**, with risk defined from the FVG low and a configurable risk-to-reward take-profit. It visually plots the FVG zone, entry label, and projected SL/TP levels, allowing only one trade per detected FVG.
Breakout Modewww.youtube.com
======中文===========
策略源于方方土的早盘突破模式，仅限5分钟K线
用前几根K线的高点和低点作为震荡区间，当区间小于平均波动的50%时，突破开盘的震荡区间后，在Measure Move止盈
=======English========
The strategy is derived from Fangfangtu’s opening-range breakout pattern and is limited to the 5-minute timeframe.
The highs and lows of the first few candlesticks are used to define a consolidation range. When the range is less than 50% of the average volatility, a trade is entered upon a breakout of the opening consolidation range, with profit taken using a measured-move target.
