Регистрация

Displacement

Liquidity Void Navigator [AGPro Series]Liquidity Void Navigator 🔹 OVERVIEW Liquidity Void Navigator identifies impulsive price displacements that were produced with disproportionately low volume participation — the institutional footprint of a true liquidity void. Unlike geometric gap concepts that rely purely on wick-to-wick imbalance, this engine measures the efficiency of each impulsive bar: how much price moved relative to how much volume was transacted. When price travels faster than the order book justifies, a magnet zone is born. These zones frequently act as high-probability retest and mean-reversion targets for SMC and ICT traders. 🔹 UNIQUE EDGE Most gap-based tools on TradingView detect Fair Value Gaps using a 3-bar geometric pattern. This indicator uses a fundamentally different signature: - Volume Efficiency Ratio (core innovation): efficiency = (volume / avgVol) / (range / ATR). Values below the threshold reveal bars where price displacement outpaced volume effort — the statistical definition of a liquidity void. - Body-based zones, not wick-to-wick: the void box spans the impulsive candle body, excluding wicks that represent liquidity sweeps. - Dynamic lifecycle management: zones are tracked from birth through mid-line mitigation, with configurable trigger modes (close cross, wick touch, or full fill). - Strongest-void emphasis: the lowest-efficiency active void automatically receives a bold neutral-colored border, giving traders an at-a-glance view of the most reliable magnet on the chart. 🔹 METHODOLOGY Each completed bar is evaluated against four quality filters: 1. Range Expansion — bar range must exceed ATR × configurable multiplier (default 1.3). 2. Volume Efficiency — the efficiency ratio must fall below the configurable cap (default 0.85). 3. Minimum Height — void must be at least a fraction of ATR to filter micro-noise (default 0.5×). 4. Body Dominance — the candle body must represent at least 50% of the total range, confirming directional conviction rather than indecision. Qualifying bars create a directional void zone spanning the body. An optional next-bar gap confirmation adds stricter FVG-style filtering. Active zones are continuously evaluated against the selected mitigation mode and updated in real time. Oldest active voids are pruned when the per-side cap is exceeded, keeping the chart focused on recent, actionable structure. 🔹 SIGNALS & ALERTS Four alert conditions are available: - New Bullish Liquidity Void — an upward impulsive void is detected. - New Bearish Liquidity Void — a downward impulsive void is detected. - Bull Void Mitigated — closing price crosses the mid-line of an active bullish void from above. - Bear Void Mitigated — closing price crosses the mid-line of an active bearish void from below. Each alert fires only on bar close to eliminate repainting concerns. Alert messages include the ticker and timeframe for multi-chart workflows. 🔹 KEY INPUTS Void Detection - Volume Baseline Lookback — window for average volume and range calculations. - Min Range Expansion (×ATR) — minimum impulsive bar size. - Max Volume Efficiency Ratio — core void qualification threshold. - Min Void Height (×ATR) — filters micro-voids. - Require Gap with Next Bar — optional strict confirmation. - Mitigation Trigger — choose between Close Cross (institutional default), Wick Touch (strict), or Full Fill (swing). Lifecycle - Max Active Voids per Side — visual cap to prevent chart clutter. - Zone Right Extension — how far zones project to the right. - Show Mitigated Voids — optionally display filled zones in gray. Visuals - Bullish / Bearish / Mitigated colors, mid-line toggle, projection arrow toggle, label size. Panel - Show / position / font size. 🔹 HOW TO USE Trend-aligned reversion entries: When price returns to an unmitigated void in the direction of the higher-timeframe trend, watch for rejection at the mid-line or far edge as a potential long (bull void) or short (bear void) trigger. Breakout continuation context: Newly formed voids in the direction of a breakout often indicate institutional participation. Waiting for a retest of the void zone can provide improved risk-to-reward compared to chasing the breakout bar. Strongest-void bias: The yellow-bordered void on the chart represents the lowest-efficiency (statistically strongest) active zone. Traders can treat it as the highest-probability magnet for price revisits. Fill Rate context: A persistently high fill rate on a given symbol or timeframe indicates that voids fill rapidly — more suitable for scalping. A lower fill rate suggests that unfilled voids accumulate meaningfully, offering swing-style opportunities. Multi-timeframe workflow: Identify voids on a higher timeframe (4H or 1D) as strategic bias zones, then use a lower timeframe (15m or 1H) for tactical execution when price approaches those higher-timeframe voids. 🔹 LIMITATIONS & TRANSPARENCY - This indicator is built for liquid markets with reliable volume data. Thinly traded symbols or instruments without accurate volume feeds (some spot FX, certain indices) will produce unreliable results. - Not every detected void will be retested or filled. Voids are statistical zones of interest, not guarantees. - The indicator is a visualization and analytical tool, not a trading strategy. It does not generate buy or sell recommendations. - Fill rate statistics are computed over the visible history of active and mitigated voids and are approximate; they are intended as a relative gauge of symbol behavior, not as a backtested performance metric. - Mitigation triggers are bar-close based to avoid repainting. Intrabar signals may appear and disappear until the bar confirms. - Zones have a fixed right extension from their birth bar; the indicator does not extend zones infinitely. 🔹 RISK DISCLOSURE Trading financial markets involves substantial risk of loss and is not suitable for all investors. Past performance of any technical indicator, including this one, is not indicative of future results. This tool is provided for educational and analytical purposes only and does not constitute financial advice, investment recommendations, or solicitation to trade. Users are solely responsible for their own trading decisions, risk management, and outcomes. Always conduct independent analysis and consult with a qualified financial advisor before making investment decisions.
Индикатор Pine Script®
от AGProLabs
Repricing Belt Engine [AGPro Series]Repricing Belt Engine 🔹 OVERVIEW Repricing Belt Engine identifies qualifying displacement impulses and constructs ATR-scaled repricing belts around the impulse body, then tracks each belt's first-revisit lifecycle through three discrete outcomes: Held, Rejected, and Broken. The engine turns raw impulse candles into structured, evaluable reaction zones — giving traders a clean framework for studying how price behaves when it returns to the scene of a decisive move. Unlike generic supply/demand or order block tools, this indicator does not simply mark impulse zones and leave them on the chart indefinitely. Every belt has a full state machine: Active → first qualifying touch → terminal outcome. A top-right status panel summarizes active belts, current belt context, 50-bar directional bias, and outcome counts so the chart context is always one glance away. 🔸 UNIQUE EDGE Most displacement or supply/demand indicators stop at drawing a box. Repricing Belt Engine differentiates itself with four specific mechanics: • ATR-scaled geometry — Belt width is normalized by ATR (not raw body size), producing consistently visible zones across volatility regimes and symbols. Optional "Auto (Body)" and "Body 70%" modes are available for traders who prefer tighter constructions. • Three-outcome lifecycle model — Every belt resolves into one of five states (Active, Held, Rejected, Broken, Expired) based on penetration depth and close position. No more static zones cluttering the chart after price has decisively moved on. • Depth-gated touch qualification — Wick-grazing does not trigger state transitions. A revisit must penetrate the belt by a configurable minimum depth (ATR-relative) before it counts, filtering noise from meaningful reactions. • Excursion-tolerant hold detection — A belt can be marked Held even when price briefly dips beyond it, as long as the close respects the belt and the excursion stays within the Hold Tolerance band. This matches how institutional levels actually react in live markets. 🔹 METHODOLOGY 1. Impulse Qualification: A bar qualifies as an impulse when its body magnitude exceeds Impulse Threshold × ATR AND its body-to-range ratio is at least Min Body / Range Ratio. Both gates must pass — this filters out long-wick bars that look decisive but are not. 2. Belt Construction: On a qualifying impulse, a belt is drawn using the selected Width Mode. In ATR Scaled mode (default), the belt is centered on the impulse body midpoint and spans ±ATR Width Half-Span × ATR. A mid-line is drawn through the belt center. 3. Cooldown: A minimum bar gap (Cooldown Between Belts) is enforced between consecutive belt formations, preventing rapid clustering in extended trends. 4. Lifecycle Tracking: On every confirmed close, each active belt is evaluated: • If close breaches the belt with excursion beyond Reject Tolerance → Broken • If close recovers but excursion exceeded Hold Tolerance → Rejected • If close respects the belt after a qualifying touch → Held • If no resolution within Belt Max Lifetime bars → Expired 5. Active Cap: A maximum number of concurrent active belts is enforced (Max Active Belts). When the cap is reached, the oldest active belt is auto-expired to keep the chart focused on the current narrative. 🔸 SIGNALS & ALERTS On-chart visuals: • Bull/Bear belt zones with ATR-scaled width and mid-line • Impulse origin markers (small triangles) anchoring each belt to its source bar • State-colored labels at resolution: Held OK (state color), Broken X (opposite state color), Rejected (neutral, shown only in Detailed label mode) • Faded rendering for resolved belts so the active story stays visually dominant Top-right status panel: • Active belt count • Current belt context (side, position, held flag) • 50-bar directional bias (Bull UP / Bear DN / Neutral) • 50-bar outcome counts (Held / Rejected / Broken) Alert conditions: • Repricing Belt Formed • Belt Touched (first qualifying revisit) • Belt Held • Belt Rejected • Belt Broken 🔹 KEY INPUTS Engine • Impulse Threshold (x ATR) — impulse size gate • Min Body / Range Ratio — decisive-close gate • ATR Length — volatility normalization period • Cooldown Between Belts — anti-clustering filter Belt • Width Mode — ATR Scaled / Auto (Body) / Body 70% • ATR Width Half-Span — belt half-width in ATR units • Belt Max Lifetime — auto-expiry age • Max Active Belts — concurrent belt cap State Thresholds • Min Touch Depth (x ATR) — qualifying penetration • Hold Tolerance (x ATR) — clean-hold excursion ceiling • Reject Tolerance (x ATR) — rejected-vs-broken threshold Visuals • Label Mode — Clean / Detailed • Panel Font Size, Label Font Size • Show Impulse Markers toggle 🔸 HOW TO USE 1. Apply to any symbol and timeframe. The engine is timeframe-agnostic and self-calibrates via ATR. 2. Watch for new belt formations on displacement impulses. The impulse marker confirms the origin bar. 3. When price returns, observe the lifecycle resolution: Held reactions often mark continuation points; Broken reactions frequently signal structural shifts. 4. Use the 50-bar Bias readout for directional context — sustained one-sided belt formation suggests an active trend. 5. Combine with structure tools (swing highs/lows, trendlines) for confluence. The belt is a reaction zone, not a standalone entry system. 6. Tune Impulse Threshold per timeframe: lower values (1.5–1.7) for intraday, higher (1.8–2.2) for swing. 🔹 LIMITATIONS & TRANSPARENCY • This indicator is not a strategy and does not generate buy/sell signals. It is an analytical visualization tool. • Belt outcomes are historical observations, not predictions. Past Held/Broken patterns do not guarantee future reactions. • Performance varies by symbol, timeframe, and market regime. Always test parameter settings on the instruments you trade. • Very low-liquidity or gappy symbols may produce noisy impulses. Increase Impulse Threshold or Min Body Ratio for cleaner selection. • The Max Active Belts cap intentionally limits chart information to keep focus on the current context — raise it only if your workflow benefits from longer belt history. ⚠️ RISK DISCLOSURE This script is provided for educational and analytical purposes only. It is not financial advice and does not constitute a recommendation to buy, sell, or hold any asset. Trading involves substantial risk of loss. Always conduct your own analysis, manage risk responsibly, and never trade with capital you cannot afford to lose. Past performance of any pattern or setup is not indicative of future results. Published as Public / Open-source under Mozilla Public License 2.0.
Индикатор Pine Script®
от AGProLabs
AG Pro Displacement Quality Finder [AGPro Series]AG Pro Displacement Quality Finder Overview / What It Does AG Pro Displacement Quality Finder is designed to identify displacement candles that stand out for structural intent rather than simple size alone. Instead of highlighting every large bar on the chart, the script evaluates whether a candle shows the type of directional expansion that traders often associate with meaningful repricing. The goal is to help separate ordinary volatility from displacement events that may deserve closer attention. The core logic focuses on the quality of the candle itself and the context immediately connected to it. A displacement candle can look impressive at first glance while still lacking the characteristics that make it useful in analysis. This script addresses that problem by combining body expansion measurements, marubozu-style pressure assessment, and optional volume confirmation into a single quality framework. The result is a more selective view of bullish and bearish displacement conditions. Once a valid event is detected, the script does not stop at marking the candle. It also maps a follow-up reclaim zone derived from the displacement structure so the user can monitor whether price revisits, respects, or interacts with that area later. This creates a workflow that is not limited to signal spotting. It extends the idea into post-event tracking, which is often the more practical part of chart analysis. The visual design is intended to keep the chart readable while still making the key information obvious. Displacement candles can be recolored, quality tags can classify stronger events, and reclaim zones can remain visible long enough to preserve market context. The panel summarizes the latest state and core ratios so the user can quickly understand why the most recent event qualified. Unique Edge The distinctive feature of this script is that it treats displacement as a quality problem, not just a range problem. Many tools mark large candles. This script tries to isolate higher-conviction expansion candles by checking whether the body is meaningfully large relative to ATR and average body size, whether the candle shows strong close-to-extreme behavior, and whether optional volume confirmation supports the move. A second differentiator is the reclaim-zone workflow. Instead of placing a marker and ending the analysis there, the script projects a reclaim area from the detected displacement structure. That makes the tool useful both at the moment of expansion and in the bars that follow. Traders who study impulsive moves often care just as much about what happens after the expansion candle as they do about the candle itself. The script also uses visual hierarchy to keep stronger and more relevant structures easier to read than older or lower-priority ones. This helps reduce the “everything matters equally” problem that often makes zone-based tools harder to use in practice. Methodology The script evaluates bullish and bearish displacement candidates using multiple filters that are designed to work together rather than as isolated checks. At the center of the model is body expansion. The candle body is compared against ATR and against an average-body baseline so that the script can judge whether a bar is unusually forceful for the instrument and timeframe being viewed. A marubozu-proximity component is then used to assess directional cleanliness. In simple terms, the script looks for candles whose closing behavior suggests genuine directional pressure rather than a wide but indecisive bar. This helps reduce false positives from candles that are large in total range but weak in directional conviction. An optional volume confirmation layer can be enabled for users who want displacement selection to include participation strength. This does not redefine the script into a volume indicator. It simply acts as an additional confirmation filter for users who prefer more selectivity. When a displacement event qualifies, the script can recolor the candle and assign a quality tag. The quality tag reflects the combined strength of the measured conditions rather than a single-factor reading. The script then builds a reclaim zone tied to that displacement structure and extends it forward so later interaction can be monitored on the chart. Signals & Alerts The script is built around bullish and bearish displacement detection. When the selected conditions are met, the chart can display a quality tag and the displacement candle can be visually emphasized. Reclaim zones are then plotted so the user can follow the area after the impulse. Bullish and bearish alerts can be used to notify the user when a qualified displacement event appears. These alerts are intended to identify the script’s filtered displacement conditions, not to predict the full future path of price. In practice, they are most useful as chart-review prompts or workflow triggers rather than as stand-alone trade instructions. Key Inputs Users can customize the strictness and presentation of the model through inputs such as: - Body expansion sensitivity relative to ATR - Body expansion sensitivity relative to average candle body - Marubozu proximity threshold - Optional volume confirmation - Candle recoloring - Quality tag visibility - Reclaim zone visibility and extension length - Panel font size - Label font size - General visual display preferences These controls allow the script to be tuned for more aggressive discovery or more selective filtering depending on instrument behavior and timeframe. Limitations & Transparency This script does not claim to identify every important move, nor does it assume that every qualified displacement event will lead to continuation. Some valid expansion candles can fail quickly, while some useful moves may be excluded if the filters are set too strictly. That trade-off is part of any selective model. Reclaim zones are analytical reference areas, not guarantees of support or resistance. Price may react, ignore the zone, briefly interact with it, or invalidate it entirely. The script is designed to visualize these areas in a structured way, but interpretation remains with the user. Results can vary materially across assets, sessions, volatility regimes, and timeframes. Thresholds that work well on one instrument may be too loose or too strict on another. Users should expect to calibrate settings rather than assume one configuration is universally optimal. As with most chart tools, visual density can increase if many qualifying events occur in the same region. The script includes hierarchy-oriented visual handling, but it is still best used with sensible chart context and reasonable parameter choices. Risk Disclosure This script is an analytical charting tool. It is not financial advice, not a promise of performance, and not a guarantee of future results. It does not know the user’s objectives, risk tolerance, execution quality, or portfolio constraints. Displacement, momentum expansion, and reclaim behavior can all be useful concepts in market analysis, but none of them remove uncertainty. Users should apply their own process, risk controls, and independent judgment before acting on any chart observation generated by this script.
Индикатор Pine Script®
от AGProLabs
2
NAS100 9:30 NY Displacement + EMA + LiquidityThis indicator is designed for NAS100 / US100 traders using the 30-minute timeframe. It highlights the 9:30 AM New York open candle when it meets strict momentum and trend alignment criteria. Conditions Required A signal will only print when all of the following are true: The candle is the 9:30 AM New York 30-minute candle. The candle qualifies as a displacement candle: Body size greater than ATR × user-defined multiplier Minimum body percentage relative to full candle range EMA alignment: Bullish: Close above both the 21 EMA and 50 EMA Bearish: Close below both the 21 EMA and 50 EMA Purpose The model is built to isolate strong New York open expansion candles that align with short-term trend structure. Liquidity, higher timeframe bias, and key levels are intended to be assessed manually by the trader. Signals are selective and will not appear every session. Recommended Use 30-minute timeframe NAS100 / US100 / NQ IMPORTANT: Used alongside personal liquidity and structure analysis (PDH and PDL) Best during active New York session KILL conditions This tool is designed for traders who combine systematic filters with discretionary execution.
Индикатор Pine Script®
от moneygyall
Smart Money Range + Displacement🧠 How This Indicator Works This indicator is based on Smart Money Concepts, which follow how institutions actually move the market: Build liquidity → Take liquidity → Show intent → Move price It does not predict the market. It reacts only after confirmation. 1️⃣ Trend Filter (EMA) – Market Direction What it does: The Exponential Moving Average (EMA) shows the dominant market direction. How it’s used: Price above EMA → bullish bias → only BUY signals Price below EMA → bearish bias → only SELL signals Why it matters: Institutions usually push price in the direction of the higher-timeframe trend. This filter removes low-probability counter-trend trades. 2️⃣ Smart Money Range – Liquidity Zone What it does: The indicator calculates the highest high and lowest low over a fixed number of candles to create a trading range. Why this range matters: Equal highs and equal lows form inside ranges Retail stop-loss orders accumulate at range boundaries These areas become liquidity pools Institutions need liquidity to enter large positions — this shows where it is. 3️⃣ Liquidity Sweep – Stop Hunt Detection What it does: The indicator detects when price breaks above or below the range but fails to close outside it. What this means: Stops above highs or below lows are triggered Retail traders are trapped Smart money absorbs liquidity This is manipulation, not a real breakout. 4️⃣ Displacement Candle – Institutional Entry What it does: The indicator checks for a candle with a body significantly larger than recent candles. Why displacement is important: Large candle bodies show strong order flow Confirms that institutions have entered the market Filters out weak or fake moves No displacement = no trade. 5️⃣ Trade Confirmation Logic – Final Signal BUY Signal Conditions Liquidity taken below the range Strong displacement candle Price above EMA SELL Signal Conditions Liquidity taken above the range Strong displacement candle Price below EMA Meaning: Only trade after liquidity is taken and real momentum appears in trend direction. 6️⃣ Signal Plotting – Clear Execution What you see on the chart: BUY label below the candle SELL label above the candle Signals appear only after candle close, ensuring no repainting. 🔁 Market Behavior This Indicator Reads Market moves sideways (range formation) Liquidity builds Stops are taken (false breakout) Displacement confirms intent Price expands in one direction This is how institutional trading works. ⚠️ Best Usage Guidelines Best timeframes: 15m, 30m, 1H Avoid major news releases Wait for candle close Use structure-based stop loss, not fixed pips 🎯 Why This Indicator Is Effective Logic-based, not lag-based No repainting Works on Gold, BTC, Forex, Indices Filters noise and emotional trading
Индикатор Pine Script®
от Mentor_Michael03
5 Layer Script P4 Potential Reversals Package This script is a context based potential reversal framework designed to highlight areas where directional risk may shift, not to predict exact tops or bottoms. The script focuses on identifying exhaustion, failed continuation, and structural hesitation after price has completed an expansion or interacted with key higher-timeframe levels. It is intended to alert traders to possible inflection zones, where confirmation should be actively monitored. How it works -Detects conditions associated with loss of momentum or displacement failure -Highlights potential reversal zones only after price interaction occurs -Requires context and confirmation — no blind reversal signals -No repainting once a zone or marker is confirmed How to use it -Use as an early warning tool, not an entry system -Best applied after: Liquidity runs, Range extremes and Higher timeframe midpoint or boundary interaction Look for confirmation such as: -Market structure shifts -Reaction at FVGs -Signal Package confirmation Entries should be executed on lower timeframes with risk defined but can be utilized on bigger timeframes as a swing if confirmed Best practices -Counter-trend setups require strong higher-timeframe confluence -Not every highlighted zone will result in a reversal -Works best during active sessions when liquidity is present -Avoid using during low-volume or compressed ranges This package is intentionally non-predictive and confirmation-dependent, designed to keep traders aligned with risk awareness rather than anticipation. However some signals can be treated as entries if "YOUVE IDENTIFIED THE RISK"- Mark Douglas
Индикатор Pine Script®
от Pr3z_
Đại Ka 3 ATR BandsĐại Ka 3 ATR Bands – The ultimate single-slot indicator that replaces three separate ATR plots. Designed specifically for ICT/SMC traders in 2025: • Light red band (±0.5 ATR) → fake moves, Judas Swing, Turtle Soup zone • Gray band (±1.0 ATR) → normal price action • Light green band (±2.0 ATR) → real displacement zone → Silver Bullet, SFT, high-probability entries How to use: – Price stuck inside red band → expect reversal/fakeout – Price breaks and closes outside green band + volume spike → enter aggressively in that direction (85%+ win-rate inside Killzones) Default ATR(14), subtle fills for instant visual filtering of real vs fake moves. Perfect companion for Order Blocks, FVG, Breaker Blocks and NY/London Killzones. Free forever – coded with love by Đại Ka & Vietnamese ICT crew.
Индикатор Pine Script®
от bra9ont
[TehThomas] - MA Cross with DisplacementThis TradingView script, "MA Cross with Displacement," is designed to detect potential long and short trade opportunities based on moving average (MA) crossovers combined with price displacement confirmation. The script utilizes two simple moving averages (SMA) and highlights potential trade signals when a crossover occurs alongside a strong price movement (displacement). Why This Indicator is Useful This indicator enhances the standard moving average crossover strategy by incorporating a displacement condition, making trade signals more reliable. Many traders rely on moving average crossovers to determine trend reversals, but false signals often occur due to minor price fluctuations. By requiring a significant price movement (displacement), this indicator helps filter out weak or insignificant crossovers, leading to more high-probability trade opportunities. How It Works Calculates Two Moving Averages (MA) The user can set two different MA periods: MA 1 (blue line): Default period is 9 (shorter-term trend). MA 2 (red line): Default period is 21 (longer-term trend). These moving averages smooth out price fluctuations to identify overall trends. Detects Crossovers Bullish crossover: The blue MA crosses above the red MA + displacement candle → Potential long signal. Example of bullish cross with displacement: Bearish crossover: The blue MA crosses below the red MA + displacement candle → Potential short signal. Example of bearish cross with displacement: Confirms Displacement (Strong Price Move) A price displacement threshold is used (default: 1.1% of the previous candle size). For a valid trade signal, a crossover must occur alongside a strong price movement. Bullish Displacement Condition: Price increased by more than the threshold. Bearish Displacement Condition: Price decreased by more than the threshold. Visual Indicators on the Chart Bars are colored green when there is a bullish displacement. Bars are colored red when there is a bearish displacement. These color changes help traders quickly identify potential trade setups. How to Use the Indicator Add the Script to Your Chart Copy and paste the script into TradingView's Pine Script Editor. Click "Add to Chart" to activate it. Customize the Settings Adjust the moving average periods to fit your trading strategy. Modify the displacement threshold based on market volatility. Change the bar colors for better visualization. Look for Trade Signals Long Trade (Buy Signal) The blue MA crosses above the red MA (bullish crossover). A green bar appears, confirming bullish displacement. Short Trade (Sell Signal) The blue MA crosses below the red MA (bearish crossover). A red bar appears, confirming bearish displacement. Use in Conjunction with Other Indicators This indicator works best when combined with support & resistance levels, RSI, MACD, or volume analysis to improve trade accuracy. Final Thoughts The MA Cross with Displacement Indicator improves the reliability of moving average crossovers by requiring strong price movements to confirm a trade signal. This helps traders avoid false breakouts and weak trends, making it a powerful tool for identifying high-probability trades. __________________________________________ Thanks for your support! If you found this idea helpful or learned something new, drop a like 👍 and leave a comment—I’d love to hear your thoughts! 🚀 Make sure to follow me for more price action insights, free indicators, and trading strategies. Let’s grow and trade smarter together! 📈✨
Индикатор Pine Script®
от TehThomas
2022 Model ICT Entry Strategy [TradingFinder] One Setup For Life🔵 Introduction The ICT 2022 model, introduced by Michael Huddleston, is an advanced trading strategy rooted in liquidity and price imbalance, where time and price serve as the core elements. This ICT 2022 trading strategy is an algorithmic approach designed to analyze liquidity and imbalances in the market. It incorporates concepts such as Fair Value Gap (FVG), Liquidity Sweep, and Market Structure Shift (MSS) to help traders identify liquidity movements and structural changes in the market, enabling them to determine optimal entry and exit points for their trades. This Full ICT Day Trading Model empowers traders to pinpoint the Previous Day High/Low as well as the highs and lows of critical sessions like the London and New York sessions. These levels act as Liquidity Zones, which are frequently swept prior to a market structure shift (MSS) or a retracement to areas such as Optimal Trade Entry (OTE). Bullish : Bearish : 🔵 How to Use The ICT 2022 model is a sophisticated trading strategy that focuses on identifying key liquidity levels and price movements. It operates based on two main principles. In the first phase, the price approaches liquidity zones and sweeps critical levels such as the previous day’s high or low and key session levels. This movement is known as a Liquidity Sweep. In the second phase, following the sweep, the price retraces to areas like the FVG (Fair Value Gap), creating ideal entry points for trades. Below is a detailed explanation of how to apply this strategy in bullish and bearish setups. 🟣 Bullish ICT 2022 Model Setup To use the ICT 2022 model in a bullish setup, start by identifying the Previous Day High/Low or key session levels, such as those of the London or New York sessions. In a bullish setup, the price usually moves downward first, sweeping the Liquidity Low. This move, known as a Liquidity Sweep, reflects the collection of buy orders by major market participants. After the liquidity sweep, the price should shift market structure and start moving upward; this shift, referred to as Market Structure Shift (MSS), signals the beginning of an upward trend. Following MSS, areas like FVG, located within the Discount Zone, are identified. At this stage, the trader waits for the price to retrace to these zones. Once the price returns, a long trade is executed. Finally, the stop-loss should be set below the liquidity low to manage risk, while the take-profit target is usually placed above the previous day’s high or other identified liquidity levels. This structure enables traders to take advantage of the upward price movement after the liquidity sweep. 🟣 Bearish ICT 2022 Model Setup To identify a bearish setup in the ICT 2022 model, begin by marking the Previous Day High/Low or key session levels, such as the London or New York sessions. In this scenario, the price typically moves upward first, sweeping the Liquidity High. This move, known as a Liquidity Sweep, signifies the collection of sell orders by key market players. After the liquidity sweep, the price should shift market structure downward. This movement, called the Market Structure Shift (MSS), indicates the start of a downtrend. Following MSS, areas such as FVG, found within the Premium Zone, are identified. At this stage, the trader waits for the price to retrace to these areas. Once the price revisits these zones, a short trade is executed. In this setup, the stop-loss should be placed above the liquidity high to control risk, while the take-profit target is typically set below the previous day’s low or another defined liquidity level. This approach allows traders to capitalize on the downward price movement following the liquidity sweep. 🔵 Settings Swing period : You can set the swing detection period. Max Swing Back Method : It is in two modes "All" and "Custom". If it is in "All" mode, it will check all swings, and if it is in "Custom" mode, it will check the swings to the extent you determine. Max Swing Back : You can set the number of swings that will go back for checking. FVG Length : Default is 120 Bar. MSS Length : Default is 80 Bar. FVG Filter : This refines the number of identified FVG areas based on a specified algorithm to focus on higher quality signals and reduce noise. Types of FVG filters : Very Aggressive Filter: Adds a condition where, for an upward FVG, the last candle's highest price must exceed the middle candle's highest price, and for a downward FVG, the last candle's lowest price must be lower than the middle candle's lowest price. This minimally filters out FVGs. Aggressive Filter: Builds on the Very Aggressive mode by ensuring the middle candle is not too small, filtering out more FVGs. Defensive Filter: Adds criteria regarding the size and structure of the middle candle, requiring it to have a substantial body and specific polarity conditions, filtering out a significant number of FVGs. Very Defensive Filter: Further refines filtering by ensuring the first and third candles are not small-bodied doji candles, retaining only the highest quality signals. 🔵 Conclusion The ICT 2022 model is a comprehensive and advanced trading strategy designed around key concepts such as liquidity, price imbalance, and market structure shifts (MSS). By focusing on the sweep of critical levels such as the previous day’s high/low and important trading sessions like London and New York, this strategy enables traders to predict market movements with greater precision. The use of tools like FVG in this model helps traders fine-tune their entry and exit points and take advantage of bullish and bearish trends after liquidity sweeps. Moreover, combining this strategy with precise timing during key trading sessions allows traders to minimize risk and maximize returns. In conclusion, the ICT 2022 model emphasizes the importance of time and liquidity, making it a powerful tool for both professional and novice traders. By applying the principles of this model, you can make more informed trading decisions and seize opportunities in financial markets more effectively.
Индикатор Pine Script®
от TFlab
16
Point and Figure Displacement IndicatorThe PnF Displacement indicator is my custom script for TradingView, designed to analyze Point and Figure (PnF) charts with displacement features. Key components of the script include: User Inputs: Require FVG: A boolean input to determine if a Fair Value Gap (FVG) is required for displacement calculations. Displacement Type: Allows users to choose between "Open to Close" and "High to Low" for column range calculations. Displacement Length: Defines how far back to look for calculating the standard deviation of the column range. Displacement Strength: Multiplier for the standard deviation to adjust sensitivity. Box Size: Sets the size of each box in the PnF chart. Number of Boxes for Minimum Displacement: Specifies how many boxes to consider for calculating the minimum displacement. Displacement Logic: The script calculates the column range based on the selected displacement type. It computes a standard deviation of the candle range and determines a minimum displacement based on user-defined box size and count. The displacement condition combines the FVG check and the column range against the calculated minimum. Visual Representation: The bars are colored based on displacement conditions, enhancing visual analysis on the chart. This indicator aids traders in identifying significant price movements in PnF charts while incorporating user customization options for better analysis.
Индикатор Pine Script®
от ScotchNoCoke
Displacement [QuantVue]Displacement refers to a significant and forceful price movement that indicates a potential shift in market sentiment or trend. Displacement is characterized by a strong push in price action, often seen after a period of consolidation or within a trending market. It is a key concept used to identify the strength of a move and to confirm the direction of the market. The "Displacement" indicator does this by focusing on identifying strong, directional price movements by combining candlestick analysis with volatility (ATR). Displacement often appears as a group of candles that are all positioned in the same direction, these candles typically have large bodies and short wicks. How the indicator works: Body Size Requirement: Ensures that only candles with a significant body size (relative to their total range) are considered, helping to identify strong market moves. Consecutive Candle Analysis: Identifies shifts in market sentiment by requiring a series of consecutive bullish or bearish candles to confirm a potential change in trend. ATR-Based Analysis: Uses the Average True Range (ATR) to gauge market volatility and filter out minor price fluctuations, focusing on substantial movements. Once all of the requirements are met a triangle is plotted above or below the bar.
Индикатор Pine Script®
от QuantVue
lib_priceactionLibrary "lib_priceaction" a library for everything related to price action, starting off with displacements displacement(len, min_strength, o, c)   calculate if there is a displacement and how strong it is   Parameters:      len (int) : The amount of candles to consider for the deviation      min_strength (float) : The minimum displacement strength to trigger a signal      o (float) : The source series on which calculations are based      c (float) : The source series on which calculations are based   Returns: a tuple of (bool signal, float displacement_strength)
Библиотека Pine Script®
от robbatt
2
Displacement (Two FVGs)A simple indicator that attempts to identify displacement in price by alerting you when two simultaneous Fair Value Gaps (FVGs) occur. When two fair value gaps occur, the indicator will print a green bar (if bullish) or a red bar (if bearish). If you right click on the indicator you can turn on alerts that will pop up every time a dual FVG occurs. Fair Value Gaps are most commonly used amongst price action traders and are defined as instances in which there are inefficiencies, or imbalances, in the market. The concept for this indicator is very simple. Apply it to your chart and enable alerts on the instruments and timeframe you trade. When you get an alert, it could indicate larger players getting involved. This is NOT a trading strategy. Its intention is to save time by alerting you to large imbalances in price on the instruments you trade.
Индикатор Pine Script®
от elScipio
2
Liquidity Engulfing & Displacement [MsF]Japanese below / 日本語説明は英文の後にあります。 ------------------------- *This indicator is based on upslidedown's "Liquidity Engulfing Candles ". It's a very cool indicator. thank you. It has 2 functions: show the Liquidity Engulfing on HTF and candle color change when displacement occurs. === Function description === 1. Liquidity Engulfing on HTF This indicator gives Liquidity Engulfing signals not only for the current candle, but also for H4 and H1 on HTF. You can use that a bullish engulfing on H1 is a BOS on m5 and on H4 is a BOS on m15. It uses the theory of stop hunt from ICT. Also, It's possible to fire alert. 2. Displacement Change the color display of the candlesticks when a bullish candleStick or bearish candleStick is attached. Furthermore, by enabling the "Require FVG" option, you can easily discover the FVG (Fair Value Gap). It is a very useful function for ICT trading. When H1 candle takes liquidity from one side and moves with an explosive move to the other side of the previous candle (displacement), it creates break of market structure on M5. Entry on discount FVG or OTE with stop loss at or below the stop hunt wick. === Parameter description === - Liquidity engulfing candles(LEC) SETTING - Show H1 LEC … Whether to show LEC for H1 - Show H4 LEC … Whether to show LEC for H4 - Show Current LEC … Whether to show LEC for current timeframe - Apply Stop Hunt Wick Filter … Require candle wick into prior candle retracement zone - Apply Close Filter … Require LL/HH on candle in order to print a valid engulfing signal - DISPLACEMENT SETTING - Require FVG … Draw only when FVG occurs - Displacement Type … Displacement from open to close? or from high to low? - Displacement Length … Period over which to calculate the standard deviation - Displacement Strength … The larger the number, the stronger the displacement detected ------------------------- 2つの機能があります: 上位足のLiquidity engulfing（流動性獲得）を表示することと、大きな変位が発生したときにローソク足の色を変更することです。 === 機能説明 === 1. 上位足のLiquidity engulfing このインジケーターは、現在のローソク足だけでなく、上位足の H4 および H1 に対してもLiquidity engulfingシグナルを提供します。 H1はm5、H4はm15での使用を推奨します。これはICTのストップハント理論を活用しています。また、アラートを発することも可能です。 2. 変位（DISPLACEMENT） 大きな陽線、陰線を付けた場合に、そのローソク足をカラー表示を変更します。 さらに"Require FVG"オプションを有効にすることで、FVG（Fair Value Gap）を容易に発見することができます。ICTトレードにを行うにあたり大変有用な機能となっています。 === パラメータの説明 === - Liquidity engulfing candles(LEC) SETTING - Show H1 LEC … H1のLECを表示するかどうか - Show H4 LEC … H4のLECを表示するかどうか - Show Current LEC … 現在の期間の LEC を表示するかどうか - Apply Stop Hunt Wick Filter … ハラミ足、もしくは包み足になっている場合のみに検知させる - Apply Close Filter … １つ前のローソクよりも終値で超えていた場合のみに検知させる - DISPLACEMENT SETTING - Require FVG … FVG発生時のみ描画する - Displacement Type … openからcloseまでの変位か？highからlowまでの変位か？ - Displacement Length … 標準偏差を計算する期間 - Displacement Strength … 変位の強さ（数字が大きいほど強い変位を検出）
Индикатор Pine Script®
от Trader_Morry
2
ICT HTF Liquidity Levels /w Alert [MsF]Japanese below / 日本語説明は英文の後にあります。 ------------------------- *This indicator is based on sbtnc's "HTF Liquidity Levels". It's a very cool indicator. thank you. It has 3 functions: visualization of HTF liquidity (with alert), candle color change when displacement occurs, and MSB (market structure break) line display. === Function description === 1. HTF liquidity (with alert) Lines visualize the liquidity pools on the HTF bars. Alerts can be set for each TF's line. Once the price reaches the line, the line is repaint. To put it plainly, the old line disappears and a new line appears. The line that disappeared remains as a purged line. (It is also possible to hide the purged line with a parameter) The alert will be triggered at the moment the line disappears. An alert will be issued when you touch the HTF's liquid pools where the loss is accumulated, so you can notice the stop hunting with the alert. This alert is an original feature of this indicator. The timeframe of the HTF can't modify. You can get Monthly, weekly, daily and H1 and H4. Each timeframe displays the 3 most recent lines. By narrowing it down to 3, it is devised to make it easier to see visually. (This indicator original) 2. Displacement Change the color display of the candlesticks when a bullish candle stick or bearish candle stick is attached. Furthermore, by enabling the "Require FVG" option, you can easily discover the FVG (Fair Value Gap). It is a very useful function for ICT trading. 3. MSB (market structure break) Displays High/Low lines for the period specified by the parameter. It is useful for discovering BoS & CHoCH/MSS, which are important in ICT trading. === Parameter description === - HTF LIQUIDITY - Daily … Daily line display settings (color, line width) - Weekly … Weekly line display settings (color, line width) - Monthly … Monthly line display settings (color, line width) - INTRADAY LIQUIDITY - 1H … 1H line display settings (color, line width) - 4H … 4H line display settings (color, line width) - PURGED LIQUIDITY … Display setting of the line once the candle reaches - Show Purge Daily … Daily purged line display/non-display setting - Show Purge Weekly … Weekly purged line display/non-display setting - Show Purge Monthly … Monthly purged line display/non-display setting - Show Purge 1H … 1H purged line display/non-display setting - Show Purge 4H … 4H purged line display/non-display setting - MARKET STRUCTURE BREAK - MBS - Loopback … Period for searching High/Low - DISPLACEMENT FOR FVG - Require FVG … Draw only when FVG occurs - Displacement Type … Displacement from open to close? or from high to low? - Displacement Length … Period over which to calculate the standard deviation - Displacement Strength … The larger the number, the stronger the displacement detected ------------------------- このインジケータはsbtncさんの"HTF Liquidity Levels"をベースに作成しています。 上位足流動性の可視化（アラート付き）、変位発生時のローソク色変更、MSB(market structure break)ライン表示の３つの機能を有します。 ＜機能説明＞ ■上位足流動性の可視化 上位足の流動性の吹き溜まり（ストップが溜まっているところ）をラインで可視化します。ラインにはアラートを設定することが可能です。 一度価格がラインに到達するとそのラインは再描画されます。 平たく言うと、今までのラインが消えて新しいラインが出現する。という事です。 消えたラインはpurgeラインとして残ります。（パラメータでpurgeラインを非表示にすることも可能です） アラートはラインが消える瞬間に発報します。上位足の損切り溜まってるところにタッチするとアラートを発報するので、アラートにてストップ狩りに気づくことができます。 このアラート発報については本インジケータオリジナルの機能となります。 表示可能な上位足のタイムフレームは固定です。月足、週足、日足およびH1とH4を表示することができます。 各タイムフレーム、直近から3つのラインを表示します。3つに絞ることで視覚的に見やすく工夫しています。（本インジケータオリジナル） ■変位発生時のローソク色変更 大きな陽線、陰線を付けた場合に、そのローソク足をカラー表示を変更します。 さらに"Require FVG"オプションを有効にすることで、FVG（Fair Value Gap）を容易に発見することができます。ICTトレードにを行うにあたり大変有用な機能となっています。 ■MSB(market structure break)ライン表示 パラメータで指定した期間のHigh/Lowをライン表示します。ICTトレードで重要視しているBoS & CHoCH/MSSの発見に役立ちます。 ＜パラメータ説明＞ - HTF LIQUIDITY - Daily … 日足ライン表示設定（色、線幅） - Weekly … 週足ライン表示設定（色、線幅） - Monthly … 月足ライン表示設定（色、線幅） - INTRADAY LIQUIDITY - 1H … 1時間足ライン表示設定（色、線幅） - 4H … 4時間足ライン表示設定（色、線幅） - PURGED LIQUIDITY … 一度到達したラインの表示設定 - Show Purge Daily … 日足ライン表示／非表示設定 - Show Purge Weekly … 週足ライン表示／非表示設定 - Show Purge Monthly … 月足ライン表示／非表示設定 - Show Purge 1H … 1時間足ライン表示／非表示設定 - Show Purge 4H … 4時間足ライン表示／非表示設定 - MARKET STRUCTURE BREAK - MBS - Loopback … High/Lowを探索する期間 - DISPLACEMENT FOR FVG - Require FVG … FVG発生時のみ描画する - Displacement Type … openからcloseまでの変位か？highからlowまでの変位か？ - Displacement Length … 標準偏差を計算する期間 - Displacement Strength … 変位の強さ（数字が大きいほど強い変位を検出）
Индикатор Pine Script®
от Trader_Morry
32
Multi-Timeframe FVG [TFO]The goal of this indicator is to find Fair Value Gaps (FVGs) that overlap on multiple timeframes. FVGs are already meant to be “sensitive” areas where one might expect price to react from, therefore FVGs that overlap on multiple timeframes could provide even more confluence that there may be a reaction in said area (with proper context). Mitigation Type allows users to select how FVGs should be mitigated, either by wick or by completely closing through the area. The displacement option helps to filter out smaller FVGs by looking for areas where price ran rather quickly (causing displacement). This is done by comparing the candle that made the FVG to a fractional ATR value, so that one may fine-tune how much “larger” the candle range needs to be, relative to recent price action. The timeframe alignment option allows users to select how many timeframes must be converging in order to draw FVGs. For instance, with all timeframes selected, a timeframe alignment value of 2 would require that there be overlapping FVGs on 2 or more timeframes. A value of 3 would require that there be overlapping FVGs on all 3 timeframes in order for them to be drawn.
Индикатор Pine Script®
от tradeforopp
24
Visualizing Displacement [TFO]An easy and basic way to visualize displacement (energetic moves) in single bars/candles. This is determined by comparing the bar range (either from high to low, or from open to close) to its standard deviation over some specified length. The strength parameter applies some multiple to the standard deviation, which can help to filter out only the strongest indications of potential displacement. Displacement is a key concept in Inner Circle Trader (ICT) concepts, especially when anticipating potential changes in trend. Although it's fairly easy to see "displacement candles" with large ranges, the bar coloring in this script can help remind us of who is in control (buyers or sellers) based on what side is creating those energetic moves most recently. Once we see signs of displacement, we can then apply concepts like premium/discount, order blocks, optimal trade entries, etc. to look for reasonable trade opportunities in the direction of the current trend. A lack of displacement can be just as telling - if an effort to displace through a key swing high/low has failed, it's possible that a reversal may be underway.
Индикатор Pine Script®
от tradeforopp
20