EMA Trend Reversal (Regime Change)
EMA Trend Reversal (Regime Change)
This indicator highlights EMA slope reversals that often coincide with trend or regime shifts, using a simple two-stage visual system.
It is especially effective on higher timeframes (Daily / Weekly) for swing trading and trend-bias awareness.
Detailed User Guide
What the signals mean
Unconfirmed signals (triangles)
Yellow triangle below price
- EMA is turning up intrabar (not yet confirmed)
Yellow triangle above price
- EMA is turning down intrabar (not yet confirmed)
Unconfirmed signals may repeat at a set interval until confirmation.
Confirmed signals (dots)
Green dot below price
- EMA slope has confirmed upward (bullish regime shift)
Red dot above price
- EMA slope has confirmed downward (bearish regime shift)
Confirmed dots only appear after the candle closes.
Alerts
This script provides two alerts only:
EMA Reversal UP
EMA Reversal DOWN
Each alert can fire on:
Initial unconfirmed reversal
Reminder interval while unconfirmed
Final confirmed reversal
Alerts will NOT fire unless this indicator is active on at least one chart.
It may be kept on a chart you do not actively trade.
Settings
EMA Length (default: 21)
Reminder interval (minutes)
Show / hide unconfirmed triangles
Show / hide confirmed dots
Dot transparency
Colors (locked to preserve signal meaning)
Best use cases
Identifying trend or regime changes
Weekly swing trade entries and exits
Holding-period guidance during trends
Alert-based monitoring without watching charts
This is not a scalp or oscillator signal.
It works best when combined with structure, support/resistance, or higher-timeframe context.
Disclaimer
This indicator is provided for educational and informational purposes only.
It does not constitute financial, investment, or trading advice.
All trading involves risk. Use at your own discretion.
Волатильность
EDUVEST UTBOT ADJ - Adaptive ATR Trailing StopEDUVEST UTBOT ADJ - Adaptive ATR Trailing Stop with Session-Based Sensitivity
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
█ ORIGINALITY
This indicator is an enhanced version of the classic UT Bot concept, featuring automatic session-based ATR sensitivity adjustment. Unlike the original UT Bot which uses a fixed sensitivity value, this version dynamically adapts to different trading sessions (Tokyo, London, New York) and automatically detects asset characteristics to optimize signal generation.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
█ WHAT IT DOES
- Generates BUY and SELL signals based on ATR trailing stop crossovers with a moving average
- Automatically adjusts sensitivity based on current trading session (Tokyo/London/NY)
- Auto-detects asset type and applies optimized parameters for each instrument
- Displays real-time session information and volatility status
- Provides alert functionality with customizable cooldown periods
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
█ HOW IT WORKS
【Core Logic: ATR Trailing Stop】
The indicator calculates an ATR-based trailing stop using the formula:
Trailing Stop = Price ± (Sensitivity × ATR)
When price is above the trailing stop and rising, the stop trails below price.
When price is below the trailing stop and falling, the stop trails above price.
【Signal Generation】
- BUY Signal: Price crosses above the trailing stop AND Moving Average crosses above the trailing stop
- SELL Signal: Price crosses below the trailing stop AND Moving Average crosses below the trailing stop
【Session-Based Sensitivity Adjustment】
The indicator adjusts ATR sensitivity based on trading session (JST timezone):
- Tokyo (08:00-15:00): Lower sensitivity (reduced by adjustment value) - typically quieter markets
- London (15:00-23:00): Base sensitivity - moderate volatility
- New York (23:00-08:00): Higher sensitivity (increased by adjustment value) - higher volatility
【Dynamic ATR Adjustment】
When enabled, the indicator compares current ATR to its smoothed average:
- ATR Ratio = Current ATR / SMA(ATR, smoothing period)
- Volatility Multiplier = 1.0 + (Sensitivity × (2.0 - ATR Ratio))
This reduces sensitivity during high volatility (fewer false signals) and increases sensitivity during low volatility (faster response).
【Auto Asset Detection】
The indicator automatically detects the traded instrument and applies optimized parameters:
- Stable pairs (USDJPY, EURUSD, USDCHF): Base sensitivity 1.5-1.8
- Moderate pairs (AUDUSD, USDCAD, EURJPY): Base sensitivity 2.0-2.3
- Volatile pairs (GBPUSD): Base sensitivity 2.8
- Commodities (GOLD/XAUUSD): Base sensitivity 3.5
- Indices (NASDAQ/NAS100): Base sensitivity 4.0
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
█ HOW TO USE
【Recommended Settings】
- Timeframe: 15 minutes or higher (15M, 1H, 4H recommended)
- Best performance on: Forex majors, Gold, NASDAQ
- Enable "Auto Asset Detection" for optimized parameters
【Entry Rules】
- BUY: Enter long when green BUY label appears
- SELL: Enter short when pink SELL label appears
【Session Panel】
The top-right panel displays:
- Current trading session (Tokyo/London/NY)
- Volatility status (High Chance/Medium Chance/Caution)
- Mode (AUTO/MANUAL)
【Alert Setup】
1. Enable "Viewer Alert Display" in settings
2. Set cooldown period (default: 15 minutes) to avoid signal spam
3. Create alert with "Any alert() function call" condition
【Important Notes】
- This indicator does not repaint - signals are confirmed at bar close
- Lower timeframes (1M, 5M) may generate excessive signals
- Always use proper risk management and confirm with other analysis
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
█ SETTINGS OVERVIEW
🎯 Alert Settings
- Viewer Alert Display: Enable/disable alert labels
- Cooldown Function: Prevent rapid consecutive signals
- Cooldown Time: Minutes between alerts (5-60)
🔧 Dynamic ATR Settings
- Enable Dynamic ATR: Auto-adjust based on volatility
- ATR Period: Calculation period (default: 14)
- ATR Smoothing: Smoothing period for ratio calculation
- Volatility Sensitivity: How much to adjust (0.1-1.0)
🕐 Session ATR Adjustment
- Enable Time Adjustment: Session-based sensitivity
- Show Session Info: Display session panel
📊 Asset Settings
- Auto Asset Detection: Automatically optimize for instrument
- Manual settings available when auto-detection is disabled
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
█ CREDITS
Based on the original UT Bot concept by QuantNomad.
Enhanced with session-based adaptation and auto-asset detection by EduVest.
License: Mozilla Public License 2.0
Asset Volatility Heatmap [SeerQuant]Asset Volatility Heatmap (AVH)
AVH is a cross-sectional volatility dashboard that ranks up to 30 assets and visualizes regime shifts as a time-series heatmap.
It computes annualized historical volatility (%) on a fixed 1D basis, then maps each asset’s volatility into a configurable color spectrum for fast, intuitive scanning of risk conditions across cryptocurrencies.
⚙️ How It Works
1. Daily, Annualized Historical Volatility
Each asset is measured on a fixed 1D timeframe (independent of your chart timeframe). Volatility is annualized and expressed in percentage terms. The user can choose between 1 of 4 volatility estimators: Close-Close (log returns stdev), Parkinson (H/L), Garman-Klass or Rogers-Satchell.
2. Heatmap
A heatmap is plotted on the lower window (sorting is turned on by default). Each row represents a rank position. (Rank #1 highest vol ... Rank #30 lowest vol). This means that tokens will move between rows over time as their volatility changes. The asset labels show the current token sitting in each rank bucket. This setting can be turned off for more of a "random" look.
3. Color Scaling
The user can select how the color range is normalized for visualization.
n = (v - scaleMin) / (scaleMax - scaleMin)
Cross-Section: Scales colors using the current bar’s cross-sectional min/max across the asset list.
Rolling: Scales colors using a lookback window of cross-sectional ranges, so today’s values are judged relative to recent volatility history.
Fixed: Uses your chosen Fixed Scale Min / Max for consistent benchmarking across time.
4. Contrast Control
The Color Contrast control option changes how aggressively the palette emphasizes extremes (useful for making “risk spikes” pop vs keeping gradients smooth).
5. Summary Table + Composite Read
The table highlights the highest vol / lowest vol token, along with average / median volatility, and a simple regime read (low / medium / high cross-sectional volatility).
✨ How to Use (Practical Reads)
Spot risk-on / risk-off transitions: When the heatmap “heats up” broadly (more hot colors across ranks), cross-sectional volatility is expanding (higher dispersion / risk).
Identify which names are driving the narrative: With sorting ON, the top ranks show which assets are currently the volatility leaders — often where attention, liquidity, and positioning stress is concentrated.
Use it as a regime overlay: Low/steady colors across most ranks tends to align with calmer conditions; sharp bright bursts signal volatility events.
✨ Customizable Settings
1. Assets
30 symbol inputs (defaults to crypto, but works across markets)
2. Calculation Settings
Length (lookback)
Volatility Estimator (Close-Close / Parkinson / GK / RS)
3. Style Settings
Color Scheme (SeerQuant / Viridis / Plasma / Magma / Turbo / Red-Blue)
Color Scaling (Cross-Section / Rolling / Fixed)
Scaling Lookback (for Rolling)
Fixed Scale Min / Max (for Fixed)
Color Contrast (emphasize extremes vs smooth gradients)
Sort Heatmap (High → Low)
Gradient Legend toggle
Focus Mode (highlights the chart symbol if included)
Ticker Label Right Padding
🚀 Features & Benefits
Cross-sectional volatility at a glance (dispersion/risk conditions)
Sortable rank heatmap for tracking “who’s hot” in volatility
Multiple estimators for different volatility philosophies
Flexible normalization (current cross-section, rolling context, or fixed benchmarks)
Clean legend + summary stats for quick context
📌 Notes
Sorting changes which token appears in each row over time (rows are rank buckets).
Volatility is computed on 1D even if your chart is lower/higher timeframe.
📜 Disclaimer
This indicator is for educational purposes only and does not constitute financial advice. Past performance does not guarantee future results. Always consult a licensed financial advisor before making trading decisions. Use at your own risk.
SMA Cross + Adaptive Q MA + AMA Channel
📘 OPERATIONAL MANUAL: Adaptive Trend & SR Breakout SystemThis system combines non-parametric regression, volatility channels, and automated price action structures to identify high-probability entries.
1. Core IndicatorsAdaptive Q (KAMA): The primary trend line.
Green = Bullish;
Red = Bearish.
AMA Channel: An ATR-based envelope ($1.5 \times ATR$) that defines the "Value Area".
SMA 50 Filter: Global trend filter. Trade Long only above; Short only below.
SR Zones: Automatic boxes marking historical Support
(Blue/Green) and Resistance (Red).Shutterstock
2. Entry Rules
🟢 LONG SETUP:Price is above SMA 50.Large Lime Triangle appears (Channel Cross).Adaptive Q line is Green.Best entry: Price bounces off a Support Box.
🔴 SHORT SETUP:Price is below SMA 50.Large Red Triangle appears (Channel Cross).Adaptive Q line is Red.Best entry: Price rejects a Resistance Box.
3. Risk Management
Stop Loss: Set at $1.5 \times ATR$ or behind the nearest SR Box.
Take Profit: Target the next opposite SR Zone or exit if the Adaptive Q changes color.
4. LegendLarge Triangles: High-conviction volatility signals.
Small Triangles: Standard SMA Cross (early warning).
Red/Green Boxes: Supply and Demand zones for structural confirmation.
Aggro-15min Pro V4.2 [SMA200 + Vortex] (v6 Ready)🚀 Aggro-15min Pro
Aggro-15min Pro is a professional-grade algorithmic strategy optimized for the 15-minute timeframe. It combines structural trend analysis with aggressive momentum tracking to capture high-probability swings while filtering out market noise.
🛠️ How the Strategy Works
1. Structural Trend (The "Guardrail")
200 SMA: The strategy identifies the primary market direction. It only buys above the 200 SMA and only sells below it, ensuring you stay on the side of institutional flow.
2. Execution Trigger (The "Signal")
EMA Cross (9/50): A crossover of the 9-period Fast EMA and 50-period Slow EMA triggers the entry, identifying a confirmed shift in medium-term momentum.
3. Momentum Engine (The "Vortex")
Vortex Indicator (VI): Validates the "thrust" behind the move.
Dynamic Exit: Includes a "Vortex Reverse" logic that closes trades early if the directional energy fades, preserving capital before a full reversal occurs.
4. Risk & Volatility
ADX Filter: Prevents entries during low-volatility "sideways" periods.
ATR Risk Management: Uses the Average True Range to set dynamic Stop Loss and Take Profit levels that adapt to current market volatility.
-
-
# 📂 STRATEGY PACKAGE: AGGRO-15MIN PRO
**Version:** 4.2 (Pine Script v6 Ready)
**Asset Class:** Crypto, Forex, Indices
**Timeframe:** 15 Minutes
---
## 📘 1. OPERATIONS MANUAL (English)
### 🟢 Strategy Overview
Aggro-15min Pro is a momentum-based trend-following system. It uses a "Triple-Filter" logic to ensure that trades are only taken when long-term trend, medium-term momentum, and short-term volatility are perfectly aligned.
### 🟢 Technical Indicators Setup
* **Structural Filter:** 200-period Simple Moving Average (SMA).
* **Trigger Engine:** 9-period & 50-period Exponential Moving Averages (EMA).
* **Momentum Engine:** 14-period Vortex Indicator (VI).
* **Strength Filter:** 14-period Average Directional Index (ADX).
* **Volatility/Exits:** 14-period Average True Range (ATR).
### 🟢 Entry Checklist
#### LONG Position:
1. **Trend:** Price is **ABOVE** the 200 SMA.
2. **Trigger:** 9 EMA crosses **ABOVE** the 50 EMA.
3. **Vortex:** VIP (Positive) is **ABOVE** VIM (Negative).
4. **Strength:** ADX is **ABOVE** 20.
#### SHORT Position:
1. **Trend:** Price is **BELOW** the 200 SMA.
2. **Trigger:** 9 EMA crosses **BELOW** the 50 EMA.
3. **Vortex:** VIM (Negative) is **ABOVE** VIP (Positive).
4. **Strength:** ADX is **ABOVE** 20.
### 🟢 Exit Management
* **Take Profit (TP):** $3.0 \times ATR$ (Risk/Reward 1:2).
* **Stop Loss (SL):** $1.5 \times ATR$.
* **Dynamic Exit:** If the Vortex lines cross in the opposite direction (e.g., VIM > VIP during a Long), the strategy closes the position immediately to lock in profits or minimize loss.
---
Pro Minimalist ATR (Black)The script I provided is a tool that automatically calculates and displays volatility "zones" around the average price. Here is the plain English explanation of what it is doing and why:
1. The Anchor: 20 DMA (The "Fair Value")
The script starts by calculating the 20-Day Moving Average (20 DMA).
What it represents: Think of this as the "fair price" or the "center of gravity" for the market over the last month.
In the script: It looks at the closing price of the last 20 candles, adds them up, and divides by 20. This is your baseline.
2. The Ruler: ATR (The "Volatility")
Next, it measures the Average True Range (ATR) over the last 14 days.
What it represents: This measures the "energy" or "noise" of the market. If candles are huge, the ATR is high. If candles are tiny, the ATR is low.
Why we use it: Using a fixed number (like $50) doesn't work because stocks move differently. ATR adapts to the current market mood.
3. The Zones: +1, +2, -1, -2
The script then takes that "center" (20 DMA) and adds/subtracts the "ruler" (ATR) to create four distinct levels:
+1 ATR: This is the "Upper Normal" limit. Price hanging here is bullish but normal.
+2 ATR: This is the "Extreme" limit. Statistically, price rarely stays above this line for long without snapping back. This is often an overbought signal.
-1 ATR: This is the "Lower Normal" limit.
-2 ATR: This is the "Extreme" discount. If price hits this, it is statistically stretched far below its average.
4. The Visuals: "Clean" Labeling
Finally, the script focuses on presentation:
No Lines: It specifically avoids drawing lines all over your history to keep your chart clean.
Dynamic Labels: It creates text labels only on the very last bar (the current moment). It constantly deletes the old label and draws a new one as the price moves, so it looks like the text is "floating" next to the current price.
Axis Marking: It forces marks onto the right-hand price scale (display=display.price_scale) so you can see the exact price levels (e.g., 154.20) without having to guess.
Dynamic ATR-based Renko Overlay - Non repaintingDaily ATR-Based Renko Overlay
Overview
This Pine Script v5 indicator creates a dynamic Renko overlay on your time-based charts (optimized for 1-minute timeframes), using the previous period's ATR from a user-specified higher timeframe (default: 1-hour) to determine brick sizes. Unlike traditional Renko charts, this is an overlay that draws Renko bricks directly on top of your existing candles, allowing you to combine the noise-filtering power of Renko with the full features of time-based charts.
It's designed for traders who want Renko's trend-clarity benefits without switching chart types, especially useful for intraday trading in volatile markets like forex, stocks, or crypto.
Key Features
- Adaptive Brick Sizing: Brick size is calculated as a percentage (default 40%) of the previous period's ATR (Average True Range, default length 14) from the selected higher timeframe (default: 1-hour). This makes bricks volatility-adjusted—larger in high-vol periods to reduce noise, smaller in low-vol for more detail.
- Periodic Recalculation: Resets brick size at the start of each new period based on the user-specified reset timeframe (default: daily), using the prior period's ATR from the chosen timeframe. This ensures relevance without unwanted disruptions.
- Traditional Renko Logic: Uses 1-box reversal (a full brick against the trend to reverse). Bricks form based on closing prices, ignoring time and minor fluctuations.
- Visual Style: Stepped lines with green (up) and red (down) fills for a box-like appearance. Semi-transparent for easy overlay on candles.
- Customizable Inputs:
- ATR Length: Adjust the ATR period (default: 14).
- Percentage of ATR: Fine-tune brick sensitivity (default: 0.4 or 40%; range 0-1).
- ATR Timeframe: Specify the timeframe for ATR calculation (default: "60" for 1-hour; enter as a string like "240" for 4-hour, "D" for daily, etc.).
- Reset Timeframe: Specify the period for recalculating the brick size (default: "D" for daily; enter as a string like "W" for weekly, "M" for monthly, etc.).
How It Works
1. Fetches ATR from the user-specified timeframe via `request.security` for higher-timeframe volatility data.
2. On new periods based on the reset timeframe (or first load), sets brick size to `percent * ATR_HTF`.
3. Tracks Renko "close" and "previous close" to calculate bricks:
- Upward moves add green bricks in multiples of the size.
- Downward moves add red bricks.
- Reversals require a full brick against the direction.
4. Plots and fills create the overlay, updating on each 1-min bar close.
Add it to a 1-minute chart for best results—bricks will adapt periodically while you retain full candle visibility.
Why This Indicator is Helpful
TradingView's native Renko charts are powerful but come with limitations that can frustrate serious traders:
- No Bar Replay: Native Renko doesn't support TradingView's bar replay feature, making it hard to simulate historical trading sessions.
- Inaccurate/Repainting Strategy Testing: Strategies on native Renko can repaint or lack precision due to the non-time-based nature, leading to unreliable backtests.
- Limited Data History: Fast Renko timeframes (e.g., small bricks) often load very little historical data, restricting long-term analysis.
This overlay solves these by building Renko on a time-based chart:
- Full Bar Replay Support: Replay sessions as usual on your 1-min chart—the Renko follows along.
- Accurate, Non-Repainting Testing: Test strategies on the underlying time chart without repainting issues, as Renko is derived from closes.
- Unlimited Data Depth: Access TradingView's full historical data for 1-min charts (up to years of bars), not limited by Renko's data constraints.
- Hybrid Analysis: Overlay Renko on candles to spot trends while using volume, indicators (e.g., RSI, MAs), or drawing tools that don't work well on native Renko.
It's a game-changer for trend-following, breakout strategies, or filtering noise in short-term trades. No more switching charts—get the best of both worlds!
Usage Tips
- Best on 1-min charts for intraday precision, but experiment with others.
- Tune the percentage lower (e.g., 0.3) for more bricks/sensitivity, higher (e.g., 0.5) for fewer/false-signal reduction.
- Adjust the ATR timeframe to match your strategy—e.g., "240" for longer-term volatility or "15" for shorter.
- Customize the reset timeframe for different recalculation frequencies—e.g., "W" for weekly resets to capture broader market shifts, or "240" for every 4 hours.
- Combine with alerts: right now I am experimenting with 90 period EMA and the Renko brick pullbacks to find some EDGE
If you find this useful, give it a thumbs up or share your tweaks in the comments. Feedback welcome—happy trading! 🚀
Daily ATR (Shown on All Timeframes)Daily ATR (Shown on All Timeframes) displays the Daily timeframe ATR on any chart you’re viewing, so you always know the current day’s average range without switching timeframes.
True Daily ATR (not chart ATR): The script pulls ATR from the Daily chart using request.security() and shows that value on every timeframe.
On-chart table (top-right): A clean 2-row table shows:
The label: Daily ATR (Length)
The ATR value, with an optional ATR-as-% of price readout.
Custom display controls:
ATR Length input (default 14)
Toggle to show ATR % of current price
Toggle to show/hide the table
Choose table text color
Choose table text size (Tiny → Huge)
Data Window output: The Daily ATR value is also plotted invisibly so it appears in TradingView’s Data Window for quick reference.
This is useful for gauging daily volatility, setting risk/position sizing, and comparing intraday movement to the stock’s typical daily range.
Intermarket Divergence (Futures vs Equity)Intermarket Divergence (Futures vs Equity)
This indicator detects intermarket divergence between a traded instrument (futures, CFD, or spot) and a related equity or ETF.
It highlights moments where price and its underlying market drivers disagree, often appearing before reversals or expansions.
🎯 What It Shows
Bullish divergence:
Price makes a lower low while the equity makes a higher low
Bearish divergence:
Price makes a higher high while the equity makes a lower high
Based on swing pivots, not candle noise
Designed for intraday context, not mechanical entries
✅ Recommended Use
XAUUSD (Gold) → GDX (default)
XAGUSD (Silver) → SIL
USOIL / WTI → XLE
(These guidelines are included directly in the indicator settings.)
🧭 How to Use
Apply on 15m–30m
Look for signals near key levels (PDH/PDL, Asia high/low, HTF structure)
Use price action for entries
Divergence is context, not a signal.
⚠️ Notes
Non-repainting
Signals are selective by design
Best during London & New York sessions
Daily ATR (Shown on All Timeframes)Daily ATR (Shown on All Timeframes) displays the Daily timeframe ATR on any chart you’re viewing, so you always know the current day’s average range without switching timeframes.
True Daily ATR (not chart ATR): The script pulls ATR from the Daily chart using request.security() and shows that value on every timeframe.
On-chart table (top-right): A clean 2-row table shows:
The label: Daily ATR (Length)
The ATR value, with an optional ATR-as-% of price readout.
Custom display controls:
ATR Length input (default 14)
Toggle to show ATR % of current price
Toggle to show/hide the table
Choose table text color
Choose table text size (Tiny → Huge)
Data Window output: The Daily ATR value is also plotted invisibly so it appears in TradingView’s Data Window for quick reference.
This is useful for gauging daily volatility, setting risk/position sizing, and comparing intraday movement to the stock’s typical daily range.
S&P 500 Momentum Coiling Tracker [20/200 MA]This indicator measures the absolute point distance between the 20-period SMA and the 200-period SMA, specifically optimized for the S&P 500 (ES/MES) index.
In the style of institutional trend following, it identifies the "Narrow State"—a period of low volatility where a major breakout is imminent.
How to read the Histogram:
🟢 GREEN (< 8 pts): Ultra-Narrow/Coiled State. Stored energy is high. Watch for an explosive breakout.
🟡 YELLOW (8-15 pts): Narrow/Transition. The averages are converging or just starting to fan out.
⚪ GRAY (15-30 pts): Neutral trending zone.
🔴 RED (> 30 pts): Extended State. Price is stretched far from the long-term mean; avoid chasing the move.
HOHO Oscillator Squeeze With Goldilocks Pivot FractalsDESCRIPTION:
HOHO Oscillator Squeeze With Goldilocks Pivot Fractals combines three powerful technical analysis methodologies into one comprehensive momentum indicator designed for identifying high-probability trading opportunities.
Core Components:
1. HOHO (Hump Oscillator)
Multi-timeframe momentum analysis using dual oscillators (fast and slow) to identify market momentum shifts. The histogram colors change based on momentum direction and strength, providing clear visual cues for trend changes.
2. Squeeze Detection
Bollinger Bands and Keltner Channel compression analysis identifies periods of low volatility (squeeze conditions) that often precede significant price moves. Yellow dots on the zero line indicate active squeeze conditions.
3. Goldilocks Pivot Fractals
Williams Fractals-based reversal detection identifies significant swing highs and lows. BUY and SELL signals are dynamically positioned to "hug" the histogram, providing clear entry and exit signals at major turning points.
Key Features:
- Dynamic Signal Positioning: Arrows and text automatically adjust to histogram height for optimal visibility
- Customizable Visual Elements: Full control over colors for arrows, text, squeeze dots, and histogram
- Multiple Alert Options: Configurable alerts for fractals, squeeze events, and momentum shifts
- Adjustable Sensitivity: Fractal periods can be tuned for different trading styles (lower = more signals, higher = fewer signals)
- Paint Bars Option: Optional bar coloring based on fast or slow oscillator momentum
- Non-Repainting: All signals are based on confirmed price action
- Independent Spacing Controls: Separate BUY and SELL text spacing for perfect visual balance
How to Use:
Entry Signals:
- BUY arrows appear below histogram at swing lows (bullish fractals)
- SELL arrows appear above histogram at swing highs (bearish fractals)
- Best entries occur when squeeze releases coincide with fractal signals
Momentum Confirmation:
- Green histogram = bullish momentum
- Red histogram = bearish momentum
- Lighter shades indicate weakening momentum
- Darker shades indicate strengthening momentum
Squeeze Conditions:
-Yellow dots = Volatility compression (squeeze active)
- Gray dots = Normal volatility (no squeeze)
- Watch for squeeze release followed by directional move
HOHO Settings:
- Adjustable MA lengths and types (EMA/SMA)
- Customizable smoothing parameters
Goldilocks Fractals:
- Fractal Periods: Sensitivity control (default: 2)
- Arrow Spacing: Distance from histogram (default: 2.0)
- BUY Text Spacing: Distance from BUY arrow (default: 1.7)
- SELL Text Spacing: Distance from SELL arrow (default: 0.8)
- Toggle arrows and text independently
Visual Customization:
- Arrow colors (bullish/bearish)
- Text colors (BUY/SELL)
- Squeeze dot colors (ON/OFF)
- Dot size adjustment
Alerts:
- Bullish/Bearish fractal detection
- Squeeze start/release
- Momentum shift crossovers
Best Practices:
- Trend Alignment: Use on higher timeframes (15m+) for more reliable signals
- Confluence: Combine fractal signals with momentum direction for higher probability trades
- Risk Management: Place stops beyond the fractal high/low that triggered the signal
- Squeeze Strategy: Wait for squeeze release before taking directional positions
- Filter Signals: Increase fractal periods (10-20) to focus only on major turning points
Recommended Timeframes:
- Scalping: 5m-15m (fractal periods 2-5)
- Day Trading: 15m-1H (fractal periods 5-10)
- Swing Trading: 4H-Daily (fractal periods 10-20)
Important Notes:
This indicator is provided for educational and informational purposes only. It is not financial advice. Past performance does not guarantee future results. Always perform your own analysis and use proper risk management. Trading involves substantial risk of loss.
SPX Weekly EM This indicator calculates and projects a fixed Weekly Expected Move (EM) range for the S&P 500 (SPX), designed specifically for intraday and 0DTE options trading.
The Expected Move is derived from implied volatility dynamics using a volatility proxy and time-weighted normalization. The weekly EM is calculated once at the start of each trading week and remains fixed across all intraday timeframes to avoid recalculation noise and repainting.
Key concepts behind the indicator:
• Volatility-based expected range estimation
• Weekly fixed-range projection
• Intraday mean reversion vs. range expansion behavior
• Identification of statistically significant boundary breaks
The indicator plots:
• Weekly EM High
• Weekly EM Low
• Weekly EM Center (reference price)
Additionally, the script highlights when price decisively breaks above or below the weekly expected range, allowing traders to distinguish between normal range behavior and abnormal volatility expansion.
This tool is intended to support risk-defined option strategies such as:
• SPX 0DTE structures
• Iron Fly
• Iron Condor
• Premium-selling strategies
The script does not provide buy or sell signals and does not predict market direction. It is designed as a volatility framework and context tool to assist traders in managing risk and understanding market behavior relative to statistically expected movement.
Access to this script is invite-only to protect proprietary implementation details and usage methodology.
For educational purposes only. Not financial advice.
EMA Tango [Ultima Edition]# EMA Tango
## Overview
EMA Tango is a precision-focused breakout system designed to filter out market noise and identify high-probability entries.
Many traders struggle because they enter during low-volatility "chop" or chase prices that are already overextended. EMA Tango solves this by enforcing a strict Multi-Factor Confluence rule. It identifies when the short-term and medium-term trends are tightly compressed (The Tango) and signals exactly when that energy is released with institutional backing.
It includes a built-in Visual Backtester to instantly gauge the historical win rate of the current settings on any timeframe directly on your dashboard.
## The Strategy Logic
The system is based on the physics of market volatility: Compression leads to Expansion.
1. **The Tango (Accumulation):** When the short-term EMA (9) and medium-term EMA (21) compress tightly together, the market is storing potential energy. This is the "Watch Zone."
2. **The Move (Expansion):** We wait for a volatility release (Squeeze Fired) or a decisive Crossover.
3. **The Validation:** A breakout is ONLY valid if all selected filters align:
* **Volume:** Institutional money is present (High Relative Volume).
* **Momentum:** Trend power (WAE) breaks the volatility bands.
* **Safety:** Price is not statistically overbought (Z-Score check).
* **MTF:** The macro trend agrees with the current chart.
## Visual Guide & Dashboard
The chart visuals are designed to keep you focused on "Action" vs. "Waiting."
* **Yellow Background (The Watch Zone):**
* **Meaning:** The market is in a "Pinch." Volatility is low, and EMAs are dancing together.
* **Action:** Get ready. Do not trade yet. Wait for a breakout.
* **Green Background / Up Triangle:**
* **Meaning:** Confirmed LONG breakout. All factors (Trend, Volatility, Momentum, MTF) are aligned.
* **Red Background / Down Triangle:**
* **Meaning:** Confirmed SHORT breakdown. All factors are aligned.
* **Bottom Dashboard:**
* Displays the real-time status of every factor (Trend, Momentum, Volume, etc.).
* **Win Rate:** Shows the historical performance of the strategy on the current chart based on ATR targets.
## Configuration & Settings
This script is highly customizable. You can toggle every factor on or off to suit your trading style.
### 1. Factor Switches (Crucial)
You can relax or tighten the strategy by enabling/disabling these filters:
* **Trend Filter:** Checks EMA 9/21 alignment.
* **Volatility:** Requires a TTM Squeeze release or fresh Cross.
* **Momentum (WAE):** Requires strong momentum (Explosion).
* **Volume (RVOL):** Requires volume to be higher than average.
* **Z-Score:** Prevents buying tops or selling bottoms (Mean Reversion protection).
* **MTF Check:** Requires the higher timeframe to match your direction.
### 2. Volume Settings
* **RVOL Threshold:** How much volume is needed relative to the average (Default: 1.5x).
* **Use Projected Volume:** Highly Recommended. This calculates where the volume will likely end up based on the current elapsed time of the candle. This allows signals to appear before the candle closes if volume is rushing in.
### 3. Backtester Settings
* **ATR Length:** Sensitivity of the volatility calculation.
* **Stop Loss (xATR):** Distance of the stop loss (e.g., 1.5x ATR).
* **Reward to Risk:** Target profit multiplier (e.g., 1.5R).
* *Note: The Win Rate on the dashboard is calculated based on these parameters.*
### 4. UI & Visuals
* **Colors:** Fully customizable colors for Long, Short, and Pinch signals.
* **Plot EMA:** Toggle the EMA lines on/off to keep your chart clean.
## Pro Tips for Best Results
1. **Visual Backtesting:** Zoom out on your chart. Look at the Win Rate on the dashboard. If it is low, the market might be ranging, or your Stop Loss settings are too tight for the current volatility.
2. **The "Pinch" Background:** If you don't see the yellow background, the trend is likely already extended. Waiting for a Tango (Pinch) ensures you are entering at the start of a move, not the end.
3. **Data Window:** Hover your mouse over any candle to see exact values for RVOL, Z-Score, and Signal status in the TradingView Data Window (right-side panel).
## Disclaimer
This tool is for educational and analytical purposes only. Past performance (as shown in the visual backtester) does not guarantee future results. Always manage your risk.
FUJIKO_4dThe FUJIKO Investment Method is a strategy developed by Kabu-ojisan, based on the approach of the well-known investor Mark Minervini, with original adaptations.
It focuses on growth stocks and is a tool that determines buy timing through chart analysis.
The foundation of the method is Minervini’s SEPA criteria, enhanced with volume analysis, the Black-Cat investment method, and an original Relative Strength Rating (RSR).
After announcing this method in 2024 and conducting extensive testing, an improved version (ver. 4.0) was created.
The main indicator now includes a wide range of features.
It combines all the tools required for the Kabu-ojisan methodology into a single indicator, including:
- Enhanced SEPA signals
- Moving Average (MA) strategy tools
- Polygraph
- BEP indicator
- MVP indicator
- Turtles indicator
- STARC Bands
For more details, please refer to Kabu-ojisan’s note page (Japanese only, sorry!)
note.com
This indicator is designed to identify entry timing.
By using SEPA criteria and MA strategies, it helps find optimal entry points.
In actual use, analysis is performed with four indicators in total by combining:
- the main FUJIKO indicator
- Volume analysis indicator
- RSR indicator
- RSR Momentum indicator
The other indicators are distributed separately as TradingView indicators.
BD SessionsSession boxes indicator for intraday charts.
Highlights up to four customizable market sessions using transparent boxes with clearly defined high/low ranges and labels.
Each session can be individually configured by name, time, timezone, and color.
NYC Midnight Liquidations PRO [Takeda Trades 2026]NYC Midnight Liquidations PRO VERSION
by @TakedaTradesOfficial
v1 01/09/2026
NYC MIDNIGHT LIQUIDATIONS PRO INDICATOR - COMPLETE TRADING GUIDE
═══════════════════════════════════════════════════════════════
WHAT THIS INDICATOR DOES
This is an advanced version of the NYC Midnight indicator that adds liquidation zones - strategic price levels where leveraged traders get liquidated (forced out of positions). It combines the Hour 1 range concept with crypto/forex liquidation hunting strategies.
═══════════════════════════════════════════════════════════════
CORE COMPONENTS
1. Hour 1 Range (Same as LITE version)
• Yellow box showing 00:00-01:00 EST high/low
• Black lines for first candle open/close
• Yellow midline (dashed)
• Orange daily separator
• Candle coloring (yellow/green/red/gray)
2. Liquidation Zones (NEW)
Multiple zones stacked above and below the Hour 1 range, each representing where traders using different leverage levels will be liquidated.
═══════════════════════════════════════════════════════════════
LIQUIDATION ZONE HIERARCHY
The indicator shows 10 liquidation zones (or 11 in "Thin" mode), ordered from closest to furthest from Hour 1 range:
GOLDEN ZONE (GZ LIQ) - Closest to range
• Leverage: 200x to 261x
• Distance: 0.383% - 0.5% from Hour 1 boundaries
• Purpose: Catches the highest-leverage degens
• Trade quality: ⭐⭐ (risky, high volatility)
C+ LIQ
• Leverage: 125x to 161x
• Distance: 0.621% - 0.8%
• Trade quality: ⭐⭐⭐
B+ LIQ
• Leverage: 90x to 100x
• Distance: 1.0% - 1.111%
• Trade quality: ⭐⭐⭐
A+ LIQ
• Leverage: 60x to 75x
• Distance: 1.333% - 1.667%
• Trade quality: ⭐⭐⭐⭐
S+ LIQ (Sweet spot)
• Expanded mode: 40x to 50x (2.0% - 2.5%)
• Thin mode: 50x to 55x (1.818% - 2.0%)
• Trade quality: ⭐⭐⭐⭐⭐ BEST
S++ LIQ
• Expanded mode: 30x to 35x (2.857% - 3.333%)
• Thin mode: 40x to 45x (2.222% - 2.5%)
• Trade quality: ⭐⭐⭐⭐⭐
S+++ LIQ
• Expanded mode: 20x to 25x (4.0% - 5.0%)
• Thin mode: 35x to 37x (2.703% - 2.857%)
• Trade quality: ⭐⭐⭐⭐
PRO LIQ
• Expanded mode: 10x to 15x (6.667% - 10.0%)
• Thin mode: 30x to 33x (3.03% - 3.333%)
• Trade quality: ⭐⭐⭐
EXPERT LIQ
• Leverage: 27x to 28x
• Distance: 3.571% - 3.704%
• Trade quality: ⭐⭐⭐
GURU LIQ (Only in "Thin Liq Zones" mode)
• Leverage: 22x to 24x
• Distance: 4.167% - 4.545%
• Trade quality: ⭐⭐
═══════════════════════════════════════════════════════════════
VISUAL MODES EXPLAINED
1. GOLDEN ZONES (Default)
• All zones = YELLOW
• Best for: Neutral trading, seeing all liquidation levels equally
• Philosophy: "All liquidations are opportunities"
2. GRADED SETUPS
• Upward zones = GREEN
• Downward zones = RED
• Best for: Directional trading
• Philosophy: "Trade with the trend"
3. INVERSE LIQS
• Upward zones = RED (short opportunities)
• Downward zones = GREEN (long opportunities)
• Best for: Contrarian/reversal trading
• Philosophy: "Fade the liquidation cascade"
═══════════════════════════════════════════════════════════════
HOW TO TRADE LIQUIDATION ZONES
STRATEGY 1: LIQUIDATION HUNTING (Most Profitable)
When price reaches a liquidation zone, it often:
1. Wicks into the zone (liquidates traders)
2. Reverses sharply (no more sellers/buyers)
3. Returns toward Hour 1 range
LONG SETUP (at lower zones):
1. Wait for price to enter a liquidation zone (S+, S++, or A+)
2. Look for rejection wick or reversal candle
3. Enter on confirmation (bullish engulfing, hammer, etc.)
4. Stop loss: Below the liquidation zone
5. Target: Hour 1 midline OR opposite side of range
SHORT SETUP (at upper zones):
1. Wait for price to enter a liquidation zone
2. Look for rejection at zone midline
3. Enter on bearish confirmation
4. Stop loss: Above the liquidation zone
5. Target: Hour 1 midline OR opposite side
Best zones for this strategy: S+, S++, S+++, A+
─────────────────────────────────────────────────────────────
STRATEGY 2: LIQUIDATION CASCADE RIDING
Sometimes price blows through multiple zones (liquidation cascade). Ride the momentum:
Setup:
1. Price breaks through GZ or C+ cleanly
2. Enter in direction of break
3. Hold until S+ or S++ zone
4. Target: Next liquidation zone
5. Stop: Behind previous zone
Warning: This is aggressive. Use tight stops.
─────────────────────────────────────────────────────────────
STRATEGY 3: CROSS LABEL TRADING
The indicator shows yellow labels when price crosses liquidation zone midlines (if enabled).
How to use:
1. Enable "Show Liq Zone Cross Labels"
2. When you see a label appear (e.g., "S+"), price just crossed that zone
3. Reversal trade: Fade the move back to Hour 1
4. Continuation trade: Wait for retest and continue in that direction
─────────────────────────────────────────────────────────────
STRATEGY 4: ZONE STACKING
When multiple liquidation zones align with other technical confluences:
Perfect setup checklist:
✅ Price at S+ or S++ liquidation zone
✅ Previous day high/low nearby
✅ Fibonacci level (0.618, 0.786)
✅ Round number (e.g., 100.00, 2000.00)
✅ Trendline or support/resistance
= MONSTER TRADE SETUP
═══════════════════════════════════════════════════════════════
SETTINGS GUIDE
LIQUIDATION ZONE MODE:
"Expanded Liq Zones" (Default)
• Zones spread out more
• S+ at 2.0-2.5%, PRO at 6.67-10%
• Best for: Volatile markets (crypto, indices)
• Use when: Hour 1 range is small (<0.5%)
"Thin Liq Zones"
• Zones closer together
• Adds GURU zone (22x-24x)
• S+ at 1.818-2%, PRO at 3.03-3.333%
• Best for: Forex, stable markets
• Use when: Hour 1 range is large (>1%)
═══════════════════════════════════════════════════════════════
ADVANCED TRADING TIPS
RISK MANAGEMENT
• Position size: Risk 1-2% per trade
• Stop placement: Just beyond the liquidation zone (10-20 pips)
• Profit targets: 2-3x your risk minimum
BEST TIMES TO TRADE
1. 2:00-5:00 EST (London session) - Highest volatility
2. 8:00-11:00 EST (NY/London overlap)
3. 20:00-00:00 EST (Asian session for crypto)
MARKET-SPECIFIC TIPS
Crypto (BTC, ETH):
• Use "Expanded Liq Zones"
• Focus on S+, S++, S+++ zones
• Liquidation cascades are common
• Best on 5-15 minute charts
Forex (EUR/USD, GBP/USD):
• Use "Thin Liq Zones"
• A+ and B+ zones work best
• More mean-reverting behavior
• Best on 5-minute charts
Indices (ES, NQ, SPY):
• Either mode works
• Respect PRO zone during news
• More reliable liquidation hunts
• Best on 1-5 minute charts
═══════════════════════════════════════════════════════════════
READING THE CHART
Yellow Labels at Top/Bottom
• Appear when price crosses a zone midline
• Quick visual confirmation of liquidation levels being hit
• Use for entry timing
Dashed Midlines
• These are your precise entry levels
• Price often reacts strongest at midlines
• Watch for rejection candles here
Shaded Background
• Yellow shading after 01:00 EST = still inside Hour 1 range
• Shows where consolidation zone is
═══════════════════════════════════════════════════════════════
COMMON TRADE SCENARIOS
SCENARIO 1: Clean Liquidation Hunt
1. Price breaks Hour 1 high at 3:00 EST
2. Reaches S+ zone, shows rejection wick
3. Trade: Short back to Hour 1 midline
4. R:R: 1:3 (25 pips risk, 75 pip target)
SCENARIO 2: Cascade to PRO
1. Major news event at 8:30 EST
2. Price blasts through all zones to PRO
3. Trade: Enter continuation at S++ retest
4. Target: PRO zone
SCENARIO 3: Double Liquidation
1. Price hits S+ up, reverses
2. Then hits S+ down, reverses
3. Trade: Fade the extremes, play the range
4. Best on: Low volatility days
═══════════════════════════════════════════════════════════════
PRO TIPS
✅ The S zones (S+, S++, S+++) are the sweet spot - Most reliable reversals
✅ Combine with Hour 1 midline - When liquidation zone aligns with midline = strong level
✅ Watch volume - High volume at liquidation zones = stronger reversal
✅ Use alerts - Set price alerts at key liquidation zones
✅ Don't overtrade GZ and C+ - Too close to range, too choppy
✅ PRO zone = respect it - If price reaches PRO, it's a strong move (10%+ from Hour 1)
═══════════════════════════════════════════════════════════════
WHAT NOT TO DO
❌ Don't enter blindly when price hits a zone - wait for confirmation
❌ Don't hold through multiple zones without trailing stops
❌ Don't ignore the Hour 1 range - it's still the foundation
❌ Don't trade liquidation zones in low liquidity (Sunday nights, holidays)
❌ Don't use the same position size for all zones - further zones = larger moves
═══════════════════════════════════════════════════════════════
KEY DIFFERENCES FROM LITE VERSION
Feature LITE Liquidations
Liquidation zones ❌ ✅ (10-11 zones)
Cross labels ❌ ✅
Visual modes ❌ ✅ (3 modes)
Zone modes ❌ ✅ (Expanded/Thin)
Complexity Beginner Advanced
Best for Learning Hunting liquidations
═══════════════════════════════════════════════════════════════
BOTTOM LINE
This indicator is a liquidation hunting machine . It shows you exactly where over-leveraged traders will be forced out of their positions, creating explosive reversal opportunities. The S+/S++/S+++ zones are where the magic happens. Master these zones, and you'll never look at price action the same way again.
Remember: Liquidations create volatility and opportunity , but they also create risk . Always use stops and proper position sizing!
═══════════════════════════════════════════════════════════════
© 2026 Trading Guide - NYC Midnight Liquidations Indicator
For educational purposes only. Trade at your own risk.
NYC Midnight Liquidations LITE [Takeda Trades 2026]NYC Midnight Liquidations LITE
by @TakedaTradesOfficial
v1 01/09/2026
═══════════════════════════════════════════════════════════════
NYC Midnight Liquidations LITE
WHAT THIS INDICATOR DOES
This is an advanced version of the NYC Midnight indicator that adds liquidation zones - strategic price levels where leveraged traders get liquidated (forced out of positions). It combines the Hour 1 range concept with crypto/forex liquidation hunting strategies.
═══════════════════════════════════════════════════════════════
CORE COMPONENTS
1. Hour 1 Range (Same as LITE version)
• Yellow box showing 00:00-01:00 EST high/low
• Black lines for first candle open/close
• Yellow midline (dashed)
• Orange daily separator
• Candle coloring (yellow/green/red/gray)
2. Liquidation Zones (NEW)
Multiple zones stacked above and below the Hour 1 range, each representing where traders using different leverage levels will be liquidated.
═══════════════════════════════════════════════════════════════
LIQUIDATION ZONE HIERARCHY
The indicator shows 10 liquidation zones (or 11 in "Thin" mode), ordered from closest to furthest from Hour 1 range:
GOLDEN ZONE (GZ LIQ) - Closest to range
• Leverage: 200x to 261x
• Distance: 0.383% - 0.5% from Hour 1 boundaries
• Purpose: Catches the highest-leverage degens
• Trade quality: ⭐⭐ (risky, high volatility)
C+ LIQ
• Leverage: 125x to 161x
• Distance: 0.621% - 0.8%
• Trade quality: ⭐⭐⭐
B+ LIQ
• Leverage: 90x to 100x
• Distance: 1.0% - 1.111%
• Trade quality: ⭐⭐⭐
A+ LIQ
• Leverage: 60x to 75x
• Distance: 1.333% - 1.667%
• Trade quality: ⭐⭐⭐⭐
S+ LIQ (Sweet spot)
• Expanded mode: 40x to 50x (2.0% - 2.5%)
• Thin mode: 50x to 55x (1.818% - 2.0%)
• Trade quality: ⭐⭐⭐⭐⭐ BEST
S++ LIQ
• Expanded mode: 30x to 35x (2.857% - 3.333%)
• Thin mode: 40x to 45x (2.222% - 2.5%)
• Trade quality: ⭐⭐⭐⭐⭐
S+++ LIQ
• Expanded mode: 20x to 25x (4.0% - 5.0%)
• Thin mode: 35x to 37x (2.703% - 2.857%)
• Trade quality: ⭐⭐⭐⭐
PRO LIQ
• Expanded mode: 10x to 15x (6.667% - 10.0%)
• Thin mode: 30x to 33x (3.03% - 3.333%)
• Trade quality: ⭐⭐⭐
EXPERT LIQ
• Leverage: 27x to 28x
• Distance: 3.571% - 3.704%
• Trade quality: ⭐⭐⭐
GURU LIQ (Only in "Thin Liq Zones" mode)
• Leverage: 22x to 24x
• Distance: 4.167% - 4.545%
• Trade quality: ⭐⭐
═══════════════════════════════════════════════════════════════
VISUAL MODES EXPLAINED
1. GOLDEN ZONES (Default)
• All zones = YELLOW
• Best for: Neutral trading, seeing all liquidation levels equally
• Philosophy: "All liquidations are opportunities"
2. GRADED SETUPS
• Upward zones = GREEN
• Downward zones = RED
• Best for: Directional trading
• Philosophy: "Trade with the trend"
3. INVERSE LIQS
• Upward zones = RED (short opportunities)
• Downward zones = GREEN (long opportunities)
• Best for: Contrarian/reversal trading
• Philosophy: "Fade the liquidation cascade"
═══════════════════════════════════════════════════════════════
HOW TO TRADE LIQUIDATION ZONES
STRATEGY 1: LIQUIDATION HUNTING (Most Profitable)
When price reaches a liquidation zone, it often:
1. Wicks into the zone (liquidates traders)
2. Reverses sharply (no more sellers/buyers)
3. Returns toward Hour 1 range
LONG SETUP (at lower zones):
1. Wait for price to enter a liquidation zone (S+, S++, or A+)
2. Look for rejection wick or reversal candle
3. Enter on confirmation (bullish engulfing, hammer, etc.)
4. Stop loss: Below the liquidation zone
5. Target: Hour 1 midline OR opposite side of range
SHORT SETUP (at upper zones):
1. Wait for price to enter a liquidation zone
2. Look for rejection at zone midline
3. Enter on bearish confirmation
4. Stop loss: Above the liquidation zone
5. Target: Hour 1 midline OR opposite side
Best zones for this strategy: S+, S++, S+++, A+
─────────────────────────────────────────────────────────────
STRATEGY 2: LIQUIDATION CASCADE RIDING
Sometimes price blows through multiple zones (liquidation cascade). Ride the momentum:
Setup:
1. Price breaks through GZ or C+ cleanly
2. Enter in direction of break
3. Hold until S+ or S++ zone
4. Target: Next liquidation zone
5. Stop: Behind previous zone
Warning: This is aggressive. Use tight stops.
─────────────────────────────────────────────────────────────
STRATEGY 3: CROSS LABEL TRADING
The indicator shows yellow labels when price crosses liquidation zone midlines (if enabled).
How to use:
1. Enable "Show Liq Zone Cross Labels"
2. When you see a label appear (e.g., "S+"), price just crossed that zone
3. Reversal trade: Fade the move back to Hour 1
4. Continuation trade: Wait for retest and continue in that direction
─────────────────────────────────────────────────────────────
STRATEGY 4: ZONE STACKING
When multiple liquidation zones align with other technical confluences:
Perfect setup checklist:
✅ Price at S+ or S++ liquidation zone
✅ Previous day high/low nearby
✅ Fibonacci level (0.618, 0.786)
✅ Round number (e.g., 100.00, 2000.00)
✅ Trendline or support/resistance
= MONSTER TRADE SETUP
═══════════════════════════════════════════════════════════════
SETTINGS GUIDE
LIQUIDATION ZONE MODE:
"Expanded Liq Zones" (Default)
• Zones spread out more
• S+ at 2.0-2.5%, PRO at 6.67-10%
• Best for: Volatile markets (crypto, indices)
• Use when: Hour 1 range is small (<0.5%)
"Thin Liq Zones"
• Zones closer together
• Adds GURU zone (22x-24x)
• S+ at 1.818-2%, PRO at 3.03-3.333%
• Best for: Forex, stable markets
• Use when: Hour 1 range is large (>1%)
═══════════════════════════════════════════════════════════════
ADVANCED TRADING TIPS
RISK MANAGEMENT
• Position size: Risk 1-2% per trade
• Stop placement: Just beyond the liquidation zone (10-20 pips)
• Profit targets: 2-3x your risk minimum
BEST TIMES TO TRADE
1. 2:00-5:00 EST (London session) - Highest volatility
2. 8:00-11:00 EST (NY/London overlap)
3. 20:00-00:00 EST (Asian session for crypto)
MARKET-SPECIFIC TIPS
Crypto (BTC, ETH):
• Use "Expanded Liq Zones"
• Focus on S+, S++, S+++ zones
• Liquidation cascades are common
• Best on 5-15 minute charts
Forex (EUR/USD, GBP/USD):
• Use "Thin Liq Zones"
• A+ and B+ zones work best
• More mean-reverting behavior
• Best on 5-minute charts
Indices (ES, NQ, SPY):
• Either mode works
• Respect PRO zone during news
• More reliable liquidation hunts
• Best on 1-5 minute charts
═══════════════════════════════════════════════════════════════
READING THE CHART
Yellow Labels at Top/Bottom
• Appear when price crosses a zone midline
• Quick visual confirmation of liquidation levels being hit
• Use for entry timing
Dashed Midlines
• These are your precise entry levels
• Price often reacts strongest at midlines
• Watch for rejection candles here
Shaded Background
• Yellow shading after 01:00 EST = still inside Hour 1 range
• Shows where consolidation zone is
═══════════════════════════════════════════════════════════════
COMMON TRADE SCENARIOS
SCENARIO 1: Clean Liquidation Hunt
1. Price breaks Hour 1 high at 3:00 EST
2. Reaches S+ zone, shows rejection wick
3. Trade: Short back to Hour 1 midline
4. R:R: 1:3 (25 pips risk, 75 pip target)
SCENARIO 2: Cascade to PRO
1. Major news event at 8:30 EST
2. Price blasts through all zones to PRO
3. Trade: Enter continuation at S++ retest
4. Target: PRO zone
SCENARIO 3: Double Liquidation
1. Price hits S+ up, reverses
2. Then hits S+ down, reverses
3. Trade: Fade the extremes, play the range
4. Best on: Low volatility days
═══════════════════════════════════════════════════════════════
PRO TIPS
✅ The S zones (S+, S++, S+++) are the sweet spot - Most reliable reversals
✅ Combine with Hour 1 midline - When liquidation zone aligns with midline = strong level
✅ Watch volume - High volume at liquidation zones = stronger reversal
✅ Use alerts - Set price alerts at key liquidation zones
✅ Don't overtrade GZ and C+ - Too close to range, too choppy
✅ PRO zone = respect it - If price reaches PRO, it's a strong move (10%+ from Hour 1)
═══════════════════════════════════════════════════════════════
WHAT NOT TO DO
❌ Don't enter blindly when price hits a zone - wait for confirmation
❌ Don't hold through multiple zones without trailing stops
❌ Don't ignore the Hour 1 range - it's still the foundation
❌ Don't trade liquidation zones in low liquidity (Sunday nights, holidays)
❌ Don't use the same position size for all zones - further zones = larger moves
═══════════════════════════════════════════════════════════════
KEY DIFFERENCES FROM LITE VERSION
Feature LITE Liquidations
Liquidation zones ❌ ✅ (10-11 zones)
Cross labels ❌ ✅
Visual modes ❌ ✅ (3 modes)
Zone modes ❌ ✅ (Expanded/Thin)
Complexity Beginner Advanced
Best for Learning Hunting liquidations
═══════════════════════════════════════════════════════════════
BOTTOM LINE
This indicator is a liquidation hunting machine . It shows you exactly where over-leveraged traders will be forced out of their positions, creating explosive reversal opportunities. The S+/S++/S+++ zones are where the magic happens. Master these zones, and you'll never look at price action the same way again.
Remember: Liquidations create volatility and opportunity , but they also create risk . Always use stops and proper position sizing!
═══════════════════════════════════════════════════════════════
© 2026 Trading Guide - NYC Midnight Liquidations Indicator
For educational purposes only. Trade at your own risk.
Volatility Ranges LABDescription This is the "LAB" edition of a comprehensive Volatility Analysis System designed for precision trading. It combines multi-timeframe statistical ranges (ADR, AWR, AMR) with a real-time Data Dashboard to visualize expected market moves.
Underlying Concepts & Methodology The indicator calculates volatility based on historical averages using either SMA or RMA (Wilder's Smoothing).
Anchoring: Projects ranges from the opening price. Includes a specialized NY Midnight Open (00:00 EST) anchor for accurate Forex alignments.
Projections: Plots standard volatility limits (100%) and exhaustion extensions (up to 200%) to identify overextended price action.
Dashboard: A built-in panel monitors the current status of all three timeframes (Daily, Weekly, Monthly), acting as a risk scanner.
Key Features
3 Timeframes: Simultaneous Daily (ADR), Weekly (AWR), and Monthly (AMR) levels.
Expansion Zones: Optional levels (125%, 150%, 200%) to spot extreme reversals.
Smart Dashboard: Color-coded table indicating risk levels (Traffic Light system).
Customization: Full control over colors, line styles, and label visibility.
How to Use
Targeting: Use the 100% lines as statistical take-profit zones.
Reversals: When price reaches expansion zones (e.g., 125% of ADR), the probability of a reversal increases significantly.
Dashboard: Use it to check if the asset has already consumed its average range for the day/week.
To comply with House Rules regarding non-English UI, here is the translation of the script's settings menu:
0. Rótulos (Labels)
Tamanho do Texto = Text Size
Mostrar Período/Nome/Preço = Show Period/Name/Price
Mostrar Variação Real % = Show Real % Variation
1. Geral (General)
Escala do Gráfico = Chart Scale (Linear/Log)
Método de Cálculo = Calculation Method (SMA/RMA)
2. ADR (Daily Settings)
Ativar ADR = Enable ADR
Período Média = Average Period (Days)
Usar NY Midnight Open = Use NY Midnight Open
Projeção Futura = Future Projection (Bars)
Mostrar Expansões = Show Expansions (125-200%)
Estilo/Espessura = Style/Width
Cor Máxima/Mínima = High/Low Color
Mostrar Terços/25%/50% = Show Thirds/25%/50%
3. AWR (Weekly Settings)
Ativar AWR = Enable AWR
Período Média = Average Period (Weeks)
Usar Abertura Semanal = Use Weekly Open Ref
4. AMR (Monthly Settings)
Ativar AMR = Enable AMR
Período Média = Average Period (Months)
5. Dashboard
Mostrar Dashboard = Show Dashboard
Tema de Fundo = Background Theme (Dark/Light)
Unidade de Medida = Unit (Points/Pips)
Psicologia das Cores = Color Psychology (Traffic Light/Heatmap)
Posição na Tela = Screen Position
W.E.A.L.T.H. Resonance Gauge [Trend-Preservation]A multi-dimensional regime filter that combines Kinetic Energy (Momentum), Atmospheric Density (Trend Strength), and Volume Velocity to distinguish between "Dead Water" (Noise) and "Living Trends" (Signal).
"The Market is not chaotic; it is either Sleeping or Awake."
The WEALTH Resonance Gauge is not a simple oscillator. It is an Environmental Filter designed to solve the #1 cause of trader failure: engaging in low-probability environments ("Dead Water").
Most indicators fail because they treat all price movement as equal. They give "Buy" signals during lunch hour chop and "Sell" signals during powerful velocity breakouts. This tool fixes that by calculating the "Resonance" of the asset—the alignment between its internal momentum and the external trend structure.
CORE ARCHITECTURE:
1. The Kinetic Engine (Modified StochRSI)
Acts as the primary "Fuel Tank."
Innovation: Unlike standard oscillators that scream "Overbought" at 80, the Resonance Gauge utilizes "Latch Logic." If the Trend Strength (ADX) is rising while the Oscillator is pinned >80, the gauge recognizes a High-Velocity Event (The Icarus Protocol) and sustains the Bullish Signal instead of fading it.
2. The Atmospheric Filter (ADX + Volatility Gate)
This is the "Dead Water" mechanism.
If the Trend Strength falls below a critical threshold (Default: 20) or Volatility collapses (Squeeze), the histogram turns GRAY (Ghost Mode).
Function: It visually "mutes" the chart, telling the trader: “There is no signal here. Do not trade noise.”
3. The Volume Validator
Embeds a Relative Volume (RVOL) multiplier. A breakout is only considered "Resonant" if it is accompanied by an injection of "Life Force" (Volume).
Low-volume moves are painted with lower opacity, warning of a "Hollow Move."
HOW TO READ THE GAUGE:
🟢 BRIGHT GREEN (Resonance): The "God Signal." Momentum is rising, Trend is Active (ADX > 25), and Volume is present. Action: Execute.
🔴 BRIGHT RED (Dissonance): Structure is breaking with momentum. Action: Short/Exit.
⚪ GRAY / HOLLOW (Dead Water): The "Dyslexia Shield." The market is resting or chopping. Action: Stand Down. DO NOT TRADE.
DARK GREEN/RED (Divergence): Price is moving, but internal fuel is running out. Action: Tighten Stops (Chandelier Exit).
THE PHILOSOPHY:
This tool enforces the W.E.A.L.T.H. Discipline: We do not trade to feel alive; we trade to be precise. If the Resonance is low, the trade is invisible.
Key Levels LABDescription This is a professional Price Action & Liquidity tool designed to map critical institutional reference points across multiple timeframes (Daily, Weekly, Monthly, Yearly, and Quarterly).
Unlike standard Support & Resistance indicators that just plot lines, this script features a proprietary "Ghost Protocol" (Liquidity Mitigation Engine).
Underlying Concepts & Methodology The script uses a custom State Management System to track the lifecycle of each key level:
Level Identification: It detects the Highs and Lows of previous sessions (PDH/PDL, PWH/PWL, etc.) and stores them in persistent variables.
Mitigation Logic (The "Ghost" Effect): The script continuously monitors price action against these stored levels. When price crosses/touches a level (Liquidity Sweep), the script changes the level's visual state (color/transparency) to indicate it has been "Mitigated" or "Liquidated". This helps traders distinguish between fresh liquidity zones and used ones.
Rolling Quarterly Tracking: It includes a unique algorithm to track the highs and lows of the last 4 rolling quarters, essential for macro analysis.
Anti-Overlap Engine: A dynamic labeling system shifts text labels on the X-axis to prevent visual clutter when multiple levels cluster together.
Key Features
Multi-Timeframe Levels: Automatically plots Previous Day/Week/Month/Year Highs and Lows.
Equilibrium Points: Optional 50% (Mid) levels for Weekly and Monthly ranges.
Smart Visualization: Levels fade out or change style after being tested.
Quarterly History: Tracks the institutional quarterly cycle (Q1 to Q4).
How to Use
Fresh Levels (Solid/Bright): Act as magnets for price. Expect a reaction or a sweep.
Mitigated Levels (Ghost/Faded): Indicates liquidity has already been taken. Less likely to provide a strong reaction.
To comply with House Rules regarding non-English UI, here is the translation of the script's settings menu:
1. Configurações Gerais (General Settings)
Rótulos = Show Labels
Preços = Show Prices
Tamanho = Text Size
2. Posicionamento (Positioning)
Base = Base Distance (Bars)
Escalonar = Stagger Labels (Anti-Overlap)
Passo = Step Size
3. Ghost Protocol (Mitigation)
Ativar Efeito Fantasma = Enable Ghost Effect (Mitigation)
Transparência % = Transparency %
4. Níveis (Levels Configuration)
Diário = Daily (PDH/PDL)
Semanal = Weekly (PWH/PWL)
Mensal = Monthly (PMH/PML)
Anual = Yearly (PYH/PYL)
Histórico Trimestral = Quarterly History
Mid (50%) = Midpoint (50% Equilibrium)
Estilo = Style
Espessura = Width
ATR Profit Targets ( Auto Chart TP Levels )This indicator is designed for precise, manual trade planning without chart clutter. Unlike standard indicators that draw lines across the entire history or repaint based on live price action, this tool projects strictly forward from the current candle.
It features a unique "Connector Mode" that creates a clean visual link between the current price action and your future profit targets/stop loss, keeping your historical chart completely clean.
Key Features:
Ticker Lock : You can now lock your plan to a specific symbol (e.g., "UEC"). If you switch charts, the lines automatically hide to prevent confusion, then reappear instantly when you return to the correct ticker.
Forward Projection: Lines start exactly at the current candle and extend to the labels—no more lines cluttering the past.
Manual Precision: You input the exact "Price Paid" and "ATR Value" to match your specific trade plan.
Extended Targets (R1-R10): Choose to show anywhere from 1 to 10 profit targets based on your risk appetite.
Dynamic Stop Loss: Select from standard ATR multiples (1x, 1.25x, 1.5x, 2x) for your stop.
How to Use:
Price Paid: Open settings and input your exact entry price.
ATR Value: Input the volatility number (from your chart's ATR indicator) or your desired "step" size (e.g., 0.05 for 5 cent increments).
Lock to Ticker (Optional): Type the stock symbol in the bottom setting field to ensure these lines only appear on this specific chart.
Settings:
Position Type: Long or Short.
Price Paid: Your specific entry price.
ATR Value: The "ruler" used to calculate target distances.
Stop Loss: Choose your risk width (e.g., 1.5x ATR).
Targets to Show: Select how many R-multiple levels (1 through 10) you want visible.
Lock to Ticker: Enter a symbol to restrict drawings to that chart only.
